The Project Gutenberg EBook of The Cabinetmaker in Eighteenth-Century Williamsburg, by Mills Brown This eBook is for the use of anyone anywhere in the United States and most other parts of the world at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org. If you are not located in the United States, you'll have to check the laws of the country where you are located before using this ebook. Title: The Cabinetmaker in Eighteenth-Century Williamsburg Author: Mills Brown Editor: Thomas K. Ford Release Date: May 25, 2018 [EBook #57211] Language: English Character set encoding: UTF-8 *** START OF THIS PROJECT GUTENBERG EBOOK CABINETMAKER IN 18TH CENT WILLIAMSBURG *** Produced by Stephen Hutcheson and the Online Distributed Proofreading Team at http://www.pgdp.net
Giving Attention to the City’s chief Craftsmen in the Furniture Way; and to their Tools & Methods of Working.
As interpreted by JOHANNES HEUVEL
Master Cabinetmaker of Colonial Williamsburg
Williamsburg Craft Series
WILLIAMSBURG
Published by Colonial Williamsburg
MCMLXIX
The most historic piece of furniture in historic Williamsburg today is the throne-like Speaker’s Chair that stands in the far end of the House of Burgesses.
It is the very same chair that stood there when the portly Peyton Randolph was speaker of the House, and men like George Mason and Thomas Jefferson and Patrick Henry raised aloft in that chamber the banner of human liberty.
The same chair was probably there in 1759, too, when a newly elected burgess stood in his place to receive the plaudits of the House for his bravery in the French and Indian War. From it Speaker John Robinson came to the embarrassed young man’s rescue with the words: “Sit down, Mr. Washington; your modesty is equal to your valour, and that surpasses the power of any language I possess.”
Perhaps the Speaker’s Chair was among the “several other things” that were saved—along with the colony’s records and the portraits of the royal family—when flames gutted the Capitol in 1747. If so, this chair may be the 2 very one installed when the Capitol building was first completed in 1705. The Assembly had specified that the burgesses’ chamber should “be furnished with a large Armed Chair for the Speaker to sit in, and a cushion stuft with hair Suitable to it.”
Because of these historic associations the Speaker’s Chair may seem a most fitting key to open this account of furniture making in colonial Williamsburg. Its true aptness to the topic, however, lies in other circumstances: No one knows who made the chair or where it was made or even when it was made. And this kind of uncertainty pervades the entire subject of cabinetmaking in eighteenth-century Virginia.
A sketch of the Speaker’s Chair, reproduced full size from the 1777 journal of Ebenezer Hazard, a New England bookseller, historian, and surveyor general of the Post Office.
To continue for a moment with the same example, the Speaker’s Chair has the kind of scrolled arms frequently found on William and Mary furniture—a style that in 1700 was passing out of fashion in England. Its simple cabriole legs, with smooth knees and round feet, are typical of the early Queen Anne style just then coming into English fashion. The chair bears an overall resemblance, furthermore, to the one that stood in the House of Commons, as shown in contemporary prints. Finally, a great many items for the construction and furnishing of the Williamsburg Capitol were ordered from London.
All these circumstances give strong reason to think that the chair came from England. But they do not prove that it did. In fact, the stylistic concepts and the workmanship are such as might well have come from the shop of a Williamsburg cabinetmaker endeavoring, after the fire of 1747, to reproduce the original chair from memory.
The fact that it is constructed in part of American black walnut might seem to prove that the chair was made, 3 if not in Williamsburg, at least in the American colonies. Unfortunately, it proves nothing of the kind. Because, among other reasons, they had found the American variety less susceptible to “the worm” than English walnut, English cabinetmakers preferred the American wood and used it extensively.
“Wheresoever we landed upon this [the James] River, wee saw the goodliest Woods as Beech, Oke, Cedar, Cypresse, Wal-nuts, Sassafras, ... and other Trees unknowne,” wrote George Percy, one of the original Jamestown colonists in 1607. Captain John Smith, who explored and mapped both Virginia and New England, recorded that “all the Countrey is overgrowne with trees.”
Indian clearings, even those made in the course of fire-hunting, were infinitesimal in the vast extent of the woods. The white man’s efforts made a bigger dent, but after a century of English settlement the Reverend Hugh Jones could still report that Virginia was “one continuous forest.” And the same was true of the whole Atlantic coastal area—to say nothing of the wilderness beyond the mountains.
The size of the individual trees in this primeval forest rarely failed to excite comment, beginning with George Percy’s mention of the “goodly tall Trees” he saw near Cape Henry, the Jamestown settlers’ first landing site. With an unlimited supply of very wide boards to be had for the sawing, seventeenth- and eighteenth-century colonial cabinetmakers found good use for them in table tops and leaves, and the sides and tops of chests. Boards were often 18 to 20 inches wide, and sometimes they measured as much as two feet in width. In colonial days even wild cherry sometimes stood 100 feet tall and four feet thick.
Up and down the coast of America grew an enormous variety of trees, both evergreen and deciduous. All of them found some use in the colonial home, from rough-hewn structural members to finely crafted furniture—and even 4 to common hairbrushes and combs. In 1774 William Aylett of King William County, 50 miles from Williamsburg, advertised:
PLANK and SCANTLING to be sold by the Subscriber at his Saw Mill near Aylett’s Warehouse, Mattapony River, upon the most reasonable Terms, and of the following Kinds, viz. White Oak, Black Walnut, Sweet Gum, Ash, Poplar, Birch (which makes elegant Furniture) best Yellow Heart Pine for Flooring, and clear of Heart and Sap if required, common high Land and Slash Pine for other Uses....
Almost anything could be made of wood, and almost everything was, including many of the articles we today are familiar with in steel, iron, copper, aluminum, alloys, plastics, and rubber. Pitchforks, tableware and kitchen utensils, wheels, axles, gears and bearings, tool handles and sometimes the bodies of tools, all were made, at least in part, of wood.
The variety of woodworking crafts was almost as great as the variety of trees. In Williamsburg alone—and Williamsburg was by no means an important center in this respect—mention has been found of all the following during colonial times:
In addition, there were such related crafts as upholsterer, lumber merchant, gilder, japanner, and coach painter.
Eighteenth-century Williamsburg was not, however, quite so crowded with woodworking craftsmen as this list would 5 indicate. For if the guild traditions of the Old World required that each operation be the monopoly of a specific craft, in the New World practical needs tended to force a merging of related crafts. Only in a few of the big colonial cities—Philadelphia, New York, Boston, or Charleston—was demand great enough to keep some of the specialists going. Elsewhere the craftsmen of town or village had to be versatile—or go hungry. A Williamsburg cabinetmaker, thus, was likely to be also joiner, carver, and upholsterer—and probably undertaker as well.
This illustration from Diderot’s famous eighteenth-century encyclopedia of the arts and sciences shows the interior and lumber yard of a large European joinery. Workers inside the shop are making, carving, and fitting various elements of paneling. Outside, to the right, two others are ripping a length of scantling with a pit saw.
Right here it may be well to explain the difference between joinery and cabinetmaking as crafts, always remembering that in Williamsburg and in most of colonial America both might be practiced by the same craftsmen. Joinery involved 6 the making and installing of paneling, molding, mantel-pieces, staircases, and similar interior trim in houses. A joiner might also make furniture of the plainer sort. Cabinetmaking demanded skills of a higher order to create furniture having such refinements as curved surfaces, dovetail joints, cabriole legs, carved ornamentation, veneered or inlaid surfaces, and upholstering.
Joiner and cabinetmaker were both concerned basically with fitting together pieces of wood to make a whole structure. The pieces or parts had to be shaped, of course; and it was in the shaping processes—sawing, planing, and chiseling—that the worker’s real skill showed up. Pieces properly formed will fit together neatly and enduringly, while no amount of glue will make a sound joint of pieces that do not fit.
Two crafts always prominent in Europe are noticeably absent from the list of Williamsburg woodworking crafts. Marquetry, the intricate inlaying of patterns in contrasting woods, seems not to have been much practiced anywhere on this side of the Atlantic; probably Williamsburg cabinetmakers were rarely, if ever, called on for inlay work. The absence of turnery from the list, however, does not mean it was unknown here but only that Williamsburg cabinetmakers customarily did their own lathe work instead of sending it out to a specialist.
Here, too, may be the best place to make first acquaintance of the four Williamsburg practitioners about whom most information survives. They—and the periods of their known activity as cabinetmakers in Williamsburg—are: Peter Scott, 1732-75, who lived across the street from Bruton Parish Church and had his shop somewhere nearby, and who was, for forty years, a member of Williamsburg’s common council; Anthony Hay, 1751-67, whose “large Cabinet Maker’s Shop” has been re-created on its original Nicholson Street site, who turned innkeeper as host of the Raleigh Tavern, and whose son George, as United States attorney, prosecuted Aaron Burr for treason; Edmund Dickinson, 1764-78, who probably worked in Hay’s shop and eventually occupied it as his own master; and Benjamin Bucktrout, 1766-78, whose funeral side line became the chief business of his posterity in Williamsburg for several generations.
When Anthony Hay died in 1770, his executors advertised for sale his two lots on Nicholson Street including a dwelling house, shop, and “Timber Yard.” The reader should not assume from the words “timber yard” that Hay (and his successors at the same location on Nicholson Street, Bucktrout and Dickinson) supplied lumber to the town’s other users. Probably it was stocked only for the proprietor’s own use. In any event, the kinds of raw material that would have been piled in Hay’s yard can be guessed fairly easily.
As we shall presently see, no surviving piece of eighteenth-century furniture can be positively traced to Hay or any other Williamsburg maker. But every piece having a possible claim to local origin, including the Speaker’s Chair, contains either walnut or mahogany as the primary wood. Similarly, few documentary records survive to tell about the furniture actually made in Williamsburg shops and they do not always mention the kinds of wood used. Where they do, however, walnut and mahogany are invariably specified. Finally, archaeological excavation at the site of the Hay cabinet shop turned up a roughed-out table leg dating probably from Dickinson’s occupancy. Quite well preserved in the damp silt of the stream bed, it was easily identified as walnut. All things considered, therefore, Hay’s timber yard would surely have contained ample supplies of both walnut and mahogany.
American black walnut, known in England as “Virginia walnut,” had been the most important of native woods to the colonial cabinetmaker since the seventeenth century. Strong, durable, hard enough to resist surface marring in 8 daily use but still easy to work and carve, it shows a handsome grain, has a lovely color, and takes an excellent finish.
Known and infrequently used earlier, mahogany began to arrive in quantity both in the colonies and the mother country about 1725. In England, by the middle of the century, it had pushed aside walnut as a furniture wood. Mahogany never rose to the same pre-eminence in the colonies because other fine woods were so readily available. Mahogany was imported from Jamaica and Honduras legally, from Santo Domingo and Cuba illicitly via Jamaica. The wood from each source differed variously in its characteristic graining, color, strength, hardness, and workability. That from Santo Domingo, known as “Spanish mahogany,” was considered most desirable.
The wood of the wild black cherry was a favorite among Connecticut cabinetmakers, as it was farther south too, because of its natural strength, close grain, warm color, and resistance to splitting and warping. Peter Kalm, the Swedish botanist who visited Philadelphia in 1748, wrote:
The Joiners say that among the trees of this country they chiefly use the wild cherry trees, and the curled maple.... The wood of the wild cherry-trees (Prunus Virginiana) is very good, and looks exceedingly well, it has a yellow color, and the older the furniture is, of which is made of it, the better it looks. But it is already difficult to get at it, for they cut it everywhere, and plant it nowhere.
Hay’s yard might well have had some cherry in its piles of lumber, though probably not in great quantity. It might also have included a bit of maple—a primary favorite in New England—perhaps in some choice pieces showing the bird’s eye, curly, wavy, blister, or quilted grain patterns that often occur in this wood.
In addition, cedar, hickory, ash, beech, birch, oak, elm, locust, apple, holly, and other hard woods might have been present in the Nicholson Street timber yard in small 9 amounts. All could have found appropriate use in some kind of cabinetry.
A piece of furniture need not be made entirely of prime wood, and rarely was. In the parlor of the Brush-Everard House in Williamsburg, for example, stands a sofa made in Philadelphia about 1770; it has eight legs that show, made of mahogany, and a frame that does not show, constructed of chestnut, maple, pine, and tulip poplar. Not every article can boast so many secondary woods, though the colonial cabinetmaker had a wide choice. The secretary-bookcase in the library of the same house was possibly made in Williamsburg and shows the more usual combination of walnut and pine as primary and secondary woods.
Colonial cabinetmakers customarily selected a secondary wood that answered the construction requirements of the article in question and that was locally available and therefore cheap. The secondary wood in a piece of colonial furniture is often the best clue to the place where it was made. Yellow pine and tulip poplar were most often used in Virginia and the other southern colonies; Hay and his successors would doubtless have stocked goodly amounts of both, and very likely also some white cedar and cypress.
Probably no list of the materials that might have been used in colonial cabinetry can hope to be complete. None, certainly, could pretend to completeness that did not include a word about nails, screws, glue, and cabinet hardware.
The colonial cabinetmaker used heated animal glue regularly. It was indispensable for veneering; for attaching carved surfaces and ornaments to their plain foundations it was almost as important; and any joint, however carefully made, was stouter for a bit of adhesive.
The eighteenth-century upholsterer, of course, could not have done his work without brass tacks, and quantities 10 of them have been found in the course of archaeological excavation at the site of the Hay-Bucktrout-Dickinson cabinet shop on Nicholson Street. The colonial cabinetmaker sometimes used small nails for such special purposes as attaching drawer guides. But he would no more have nailed together a piece of furniture than would his modern counterpart. Screws he did use, for attaching cleats, braces, hinges, or other hardware. He used as few as possible, however, since all screws were handmade, probably imported, and certainly not cheap. If a joint needed to be reinforced, he used wooden pegs, not screws. (Treenails, used in house framing, were simply large pegs.)
Even the simplest piece of case furniture—such as a chest, press, bookcase, clock case, dressing table, or sideboard—needed at least one lock and possibly a set of hinges before it could leave the cabinetmaker’s hands as a finished article. These items of hardware could be of iron on the cruder examples of cabinet work or of brass on the better ones. The door handles, drawer pulls, escutcheon plates, and other visible hardware on finer pieces were almost sure to be of brass, to be designed for ornament as well as utility, and to be imported.
A number of brass hardware items—whole and cut-down hinges and escutcheon plates in particular—have been excavated at the site of the Hay shop, most of them in ground levels associated with Dickinson’s tenure. These seem to say that Dickinson was accustomed to working with fine furniture.
A great deal of authentic eighteenth-century furniture—both English and American in origin—has been assembled for display in the Exhibition Buildings of restored Williamsburg. The collection is acknowledged to be one of the finest in the country. Unfortunately, it contains not one stick of furniture that can be positively identified as coming from the hand of a Williamsburg cabinetmaker.
We do have, however, many bits and pieces of documentary evidence about various Williamsburg cabinetmakers of the colonial era and about the kind of work they did. A number of them, for example, advertised their services in the columns of the Virginia Gazette from time to time. Practitioners of other crafts often listed at great length the wares they made and sold; but the cabinetmakers usually announced only that they stood ready to make to order any kind of furniture. They were confidently versatile, it would seem; that they kept busy making and doing all sorts of things is corroborated by other scraps of written and printed information.
Joshua Kendall, when he set up shop in Williamsburg, offered to make “Venetian SUN BLINDS for windows.”
Venetian blinds were widely made and used in both the Old World and the New. This how-to-do-it illustration also comes from Diderot’s encyclopedia.
In 1755 Peter Scott announced that he intended to leave for England and would sell his house and lots, “Two Negroes, bred to the Business of a Cabinet-Maker,” and “sundry Pieces of Cabinet Work, of Mahogany and Walnut, consisting of Desks, Book-Cases, Tables of various Sorts, Tools, and some Materials.” Apparently his plan did not materialize, for when he died 20 years later his estate included “A great variety of cabinet makers tools, Mahogany, Walnut, Pine Plank, like wise new walnut book cases, desks, tables, &c.”
From personal account books of John Mercer, lawyer, and Robert Carter of Nomini Hall, planter and councilor, we know that Scott made a set of book shelves for the former and twice repaired tables for him, and that he made two card tables, one sideboard, and four picture frames for the latter.
In 1772 Benjamin Bucktrout submitted a bill for services to the same Robert Carter of Nomini Hall. It is worth quoting in full:
| 1772 | £ | s | d | |
| June 15 | To mending a Meusick Stand | 0 | 1 | 6 |
| Octbr. 26 | To 8 Mahogy. Chares Stufed over the Rails with Brass nails @£25/pr doz. | 16 | 13 | 8 |
| To 4 Elbow Chares @ 55/ | 11 | 0 | 0 | |
| Decemr. 29 | To 65 feet of pine @ d 1½ | 8 | 3½ | |
| To 150 8d nails for a packing Case for Harpsecord 2/ makeing and packing do. 10/ | 12 | 0 | ||
| £28 | 15 | 5½ |
Three years later Edmund Dickinson rendered a similar statement:
The Estate Colo John Prentis
To Edmund B. Dickinson Dr
| Novr 23d 1773 | ||||
| setting up bedsted 2/6 July 9th mend: & Cleaning up 6 chairs | £ 1 | 2 | 6 | |
| 15th puting lock on closet | 2 | 6 | ||
| 19 coffin for his Son William with Nails &c and attendance | 2 | 15 | - | |
| 1774 | Jany 3d to 7 pulleys 17/6 January 21 setting up bed at Mrs Hay’s 2/6 | 1 | - | - |
| April 25 takeing down bedsted 2/6 | 2 | 6 | ||
| 1775 | June 14 mend: bedsted 1/3 augt 23d puting lock on Room case 2/ | 3 | 3 | |
| Sept 6th mend: Mahogany table | 2 | 6 | ||
| 25 putting up bedsted & Curtains | 2 | 6 | ||
| Novr 4 to a Coffin lined throughout for himself & my Attendance | 5 | 15 | 0 | |
| £11 | 5 | 9 |
Putting together these and other bits and pieces, several conclusions seem warranted: Williamsburg cabinetmakers made furniture not only to order but for open sale in their shops; they probably spent more time repairing furniture than in making it; they were by no means too proud to undertake such incidental jobs as putting up and taking down bedsteads and curtains. Finally, they were capable of producing any and all of the major items of furniture: chairs, beds, chests, desks, bookcases, clothes and china presses, tables, and candlestands.
While perhaps not all of them would have had occasion to make every variety of the less common articles, some doubtless were called on for spinning wheels, bootjacks, bowls and trenchers, cradles, toys, tools, coffins, spice chests, fire screens, music stands, trunks, cellarettes, looking-glass frames, and so on and on.
Every swing in London fashions in clothing, music, wigs, and the decorative arts was normally echoed a few years later by a similar but muted swing in colonial fashions. In each case the peak of the vogue (not necessarily the first evidence of it) in the colonies came a decade or two after the same style had reached its height in London.
The eighteenth century was the golden age of furniture design in England. The decorative tastes of the Restoration and of the reign of William and Mary set the stage for the appearance at the opening of the century of the curvaceous style known as Queen Anne. There followed a succession of partly overlapping, sometimes ill-defined and sometimes distinct styles in English furniture design and interior design. These succeeding fashions have since become known by the names of reigning monarchs or of men whose books of collected designs set or summarized the predominant taste of the years in question. We know these styles, and style periods, as early and late Georgian, Chippendale, Adam, Hepplewhite, and Sheraton.
In the American colonies the Queen Anne style did not come into full flower until 1725 or thereabouts. The “decorated Queen Anne” or early Georgian substyles cannot be clearly discerned in colonial furniture before the advent of “Chippendale” influence, about 1750, swept all before it. Thomas Chippendale’s famous Gentleman and Cabinet-Maker’s Director, published in 1754, was but one of a number of books of designs issued in London and widely used in colonial cabinetmaking shops. It was foremost among them, however. And even if such characteristic features of colonial Chippendale as the claw-and-ball foot, for example, do not appear in Chippendale’s book, his name has become a label—perhaps ill-fitting—for the whole middle period of colonial furniture making.
Chairs.
Three design chairs—the one to the right offering alternative treatments of certain details—from Chippendale’s Gentleman and Cabinet-Maker’s Director: Being a large Collection of the Most Elegant and Useful Designs of Household Furniture, in the Most Fashionable Taste. (Third edition, London, 1762)
This period lasted through the Revolution; the wartime breach of relations with England all but cut off the transfer to America of the Adam style that was the rage of London 15 in the 1770’s. After the Revolution the designs of George Hepplewhite and, late in the century, Thomas Sheraton followed the usual route across the Atlantic.
Throughout the century, too, some regional differences can be discerned. New England followed old England in social customs and tastes but with a tinge of stateliness and a restraint of design in furniture that may have had distant Puritan ancestry. In New York, certainly, the ideas of the original Dutch settlers persisted in coloring later English influences in matters of taste. German immigrants to Pennsylvania brought sturdy non-English preferences to the areas they settled outside Philadelphia. The city itself, of course, always remained a cosmopolitan center—if a somewhat sober one—whose furniture showed the English origins of many of its chief makers.
The southern colonies, and particularly Virginia, were more closely tied to the mother country in sentiment and economy than were the others. Virginians, therefore, probably mirrored English tastes more faithfully than many of their compatriots.
English products were so much admired in Virginia, in fact, and so easily obtained by those who could afford choice things, that the local artisan had little chance to compete. Whether cause or consequence of this lack of demand for their services, Virginia cabinetmakers appear to have been less highly skilled and less highly schooled in the craft than their colleagues in London and in a number of large colonial cities. There was no “school” of cabinetry in eighteenth-century Williamsburg such as developed in Philadelphia, Newport, Charleston, and elsewhere.
A Virginian who wanted fine furniture might order it from one of these cities. More likely, he would buy it at a sale of “venture” furniture made in a northern or middle colony and shipped south to be sold for the best price it would bring. Or, he could send to England for his wants.
This was not so difficult a transaction as might at first appear. Tobacco was the source of Virginia’s wealth, and tobacco had to be shipped to England for sale. The typical large Tidewater planter consigned his annual crop to an English merchant who received, handled, and sold it. After expense deductions, the balance in the merchant’s hands represented the planter’s profits.
What was more natural than to spend it right there in England? Articles of English make were thought (usually with reason) to be of better material and workmanship than “country made” pieces, and they were undeniably more in fashion. The tobacco ships were returning to Virginia anyway, needed freight for their holds, and could unload almost at the planter’s front door. As a result of these circumstances, it was customary to send with each shipment of tobacco an order for goods to be sent back.
This dependence on the English market did not prevail—at least to the same extent—outside of the Chesapeake Bay area. In consequence, cabinetmakers as far apart as Boston and Charleston produced to order some very fine pieces of furniture. Some few examples bear the maker’s signature or shop label; others can be identified with confidence because of characteristic traits in their design or execution. Cabinetmakers of the Townsend-Goddard dynasty in Newport, Rhode Island, produced block-fronted and shell-carved case pieces that sparkle in many museums today. Thomas Affleck, Jonathan Gostelowe, Benjamin Randolph, and others in Philadelphia made that city a center of pre-Revolutionary cabinetry, and created the “Philadelphia Chippendale” school of furniture design.
Virginia cabinetmakers, too, rarely labeled or signed their products; or if they did, the products have not survived in more than a very few examples. What is known to be of Virginia origin is rarely ornate. The examples to be seen in Williamsburg today, for instance, are truly provincial: sturdy, generally well-proportioned, capably made, and inclined to be simple in decoration.
In two of the bedrooms at the Brush-Everard House in Williamsburg and in one at the Raleigh Tavern stand commodious pieces of furniture that today would probably have to be called cupboards. The eighteenth-century housewife called them clothes presses, and they served her as a place to keep the family’s entire supply of bedding and clothing not in daily use.
Two of these pieces are extremely simple in design, so simple that they may be said to lack any conscious “design” at all. Some two hundred years of use testify to the sturdiness of their construction; but they were clearly not made for show. The third—the one in the ground floor bedroom of the Brush-Everard House—is more sophisticated. It is of mahogany and southern pine rather than of walnut and pine as are the other two. It has ogee-curved bracket feet instead of straight bracket feet. And it boasts a nicely made fretwork cornice.
These touches do not make it a distinguished piece of furniture or an overly beautiful one. However, the importance of these three pieces lies not in their appearance, but rather in the fact that all three have been handed down from generation to generation in the Galt family of Williamsburg and are believed to have been made by one of the town’s eighteenth-century cabinetmakers.
Samuel Galt followed the watchmaking and silversmithing craft in Williamsburg from 1750 until his death. His older son, James, was also a silversmith until he became, in 1770, the first “keeper” of the “Lunatick Hospital” in Williamsburg. The younger son, John Minson Galt, acquired a medical education in Edinburgh and London, then became a partner in Dr. James Pasteur’s apothecary and chirurgical establishment in Williamsburg.
Unfortunately the Galt family tradition does not say which of Williamsburg’s eighteenth-century craftsmen created the articles in question. The most prominent 18 pre-Revolutionary cabinetmakers were all active during some part of the period when the Galts, father and sons, were founding the family’s name and fame. It is possible, judging from appearance alone, that the two simpler pieces could have been made for the earliest Galt by the earliest (known) cabinetmaker, Peter Scott, while the third was constructed for a later and more pretentious household by a later craftsman, perhaps Edmund Dickinson.
Dickinson was well equipped to make better furniture than any of these three clothes presses. An apprentice in Anthony Hay’s cabinet shop on Nicholson Street, he may have stayed on as journeyman during Benjamin Bucktrout’s proprietorship of the shop and timber yard. In any case, he became master of the establishment himself in 1771. Seven years later, serving as an officer in the Revolutionary army, he was killed at the Battle of Monmouth.
The appraisers of Dickinson’s estate—one of them was Bucktrout—valued his possessions at the respectable total of £164 6s. 6d. About £20 of this represented Dickinson’s library of 40 volumes. Some of these had probably been gathered by Hay in the first place, but it was still a large and wide-ranging collection of books for a craftsman. In addition to a copy of “Chippendale’s Designs” valued by itself at £6, there were books of poetry and history, English and French dictionaries, and many volumes of the Tatler, the Spectator, and the Connoisseur.
Another section of the Dickinson inventory demands particular attention here: the list of the cabinetmaker’s tools. These were valued by the appraisers at close to £50, and included 81 planes of different sorts, 11 saws, one stock or brace and 20 bits, 63 chisels and gouges, four clamps and a bench vise, a dozen miscellaneous items, and a tool box.
A cabinetmaker’s workbench and a variety of woodworking tools of the eighteenth century. Among them may be seen several bench planes, two kinds of frame saw, an assortment of chisels, some measuring and marking tools, a brace and bit, gimlets, etc. This illustration is taken from Joseph Moxon’s Mechanick Exercises, published in London in 1683.
No doubt most of these tools were made in England, though the inventory does not say so. Perhaps all of them were. Three years before Dickinson became master of his shop—just about the time he would have been acquiring many of his tools—John Blair, the acting governor of the colony, reported to the Board of Trade in London that:
Our pig-iron and some bar-iron is chiefly shipped to Britain. We do not make a saw, augur, gimlet, file or nails, nor steel; and most tools in the country are imported from Britain.
The inventory does not list hammers, files, or rasps of any kind, which is surprising as they would have been normal and necessary equipment in any woodworking shop—and a number of the latter have been found at the site of the Hay-Dickinson shop. Perhaps the appraisers overlooked them.
However, the inventory does not list workbenches or lathes either, which is the more surprising. A workbench is an absolute necessity for cabinet work, a lathe only a little less so, and neither is likely to be overlooked. It may be that the appraisers did not list them as tools because they were deemed to be permanent shop fixtures. At any rate, while we have no proof that Dickinson owned either a bench or a lathe, reason says he would have had at least one of each. Matthew Tuell, a carpenter, owned a wheel lathe and turning tools; and the partnership of Honey & Harrocks owned lathes, did their own turning, and possibly turned for other cabinetmakers.
Eighteenth-century lathes were machine tools of a sort but not “power tools” since human muscle provided their motive force. Three varieties can be seen in the reconstructed cabinet shop in Williamsburg: the bow lathe, the treadle lathe, and the great wheel lathe. The last named is the most impressive and the most effective, turning up some 700 rpm on the spindle with a good strong apprentice cranking the large wheel.
The power woodworking lathe today is a considerably more complicated machine, but the fundamental principles involved in wood turning have not changed. Similarly, in the other great category of woodworking tools—hand tools—each separate operation is accomplished in precisely the same way by tools that are basically the same as they were in the eighteenth century, or even in the eighteenth century B.C.
Turner.
A turner, whose treadle lathe spins at different speeds according to which spindle pulley is used for the drive belt. This picture is taken from The Book of Trades or Library of Useful Arts, first American edition, published by Jacob Johnson and sold in his bookstores in Philadelphia and Richmond in 1807. Courtesy, Library of Congress.
With obvious exceptions, all woodworking tools are intended primarily to remove small amounts of material by some kind of cutting or tearing action. With this simple fact in mind, it is no surprise to learn that saws, planes, chisels, and boring tools found in ancient Egyptian tombs, or depicted by artists of that time, were not significantly different from those of the eighteenth century after Christ. (Examples of furniture made in ancient Egypt, incidentally, still exist, the oldest known articles being stools dating at least from the First Dynasty—3500 B.C.!) Nor should it be surprising to find that the colonial cabinetmaker’s tools, although cruder and less convenient than those sold in a modern hardware store, were fundamentally the same and did the same jobs in the same ways. Furthermore, in the hands of a skilled craftsman the eighteenth-century tools performed their assigned tasks every bit as well as do their twentieth-century counterparts.
If it appears that Dickinson’s 81 planes were far more than any cabinetmaker needed, the number is easily explained by the likelihood that only a few were “bench planes,” the rest being “fitting-planes” or specially shaped “molding planes.”
Then as now the bench plane category included a group of flat-bottomed planes used for smoothing, leveling, and squaring pieces of wood. Varying in length from the smoothing plane of about 6 inches to the jointer of perhaps 30 inches, the group included also the trying plane, long plane, fore plane, jack plane, and strike block.
Fitting planes were those—each designed for a particular purpose—used to prepare pieces of wood for fitting together. 23 This group included planes for making rabbets, tongues, grooves, and similar shapes, and having such names as the plough, match, fillister, and moving fillister. The last was essentially a rabbet plane with an adjustable fence to guide the width of its cut, often an adjustable stop to regulate the depth of cut, and sometimes a routing bit or tooth just ahead of the leading edge of the main blade.
The third and largest group in any eighteenth-century tool collection included the molding planes for producing ornamental trim in an almost infinite variety of shapes. In the absence of machine-made millwork in stock sizes and profiles, the colonial woodworker had to produce his own. In some instances, he may even have made his own molding planes first.
The eighteenth-century plane was a simple but effective device. It had only three basic parts: a body, an iron, and a wedge. The body or “stock” was a rectangular block of beech (or some other hard wood) with a shaped vertical opening through the center. The iron, inserted into this opening, was held at the proper pitch and blade exposure by tapping the wedge tightly into position. Handles were usually attached to the larger planes.
On a bench plane the bottom or sole of the stock was flat, of course, and this was particularly important for a jointer, whose sole had to be perfectly true. But the sole of a molding plane was shaped to fit the curve or angle or combination of surfaces its blade would produce. Since even a simple quarter-round molding might on occasion be needed in several different sizes for different uses, the well-equipped cabinetmaker would need perhaps nine planes right there.
George Washington’s well-known order of goods from London for the furnishing of Mount Vernon in 1759 included in a long list of tools not only a considerable number of bench and fitting planes, but about 50 molding planes: “10 pr Hollows & Rounds, 4 two Square Asticles [astragals], 6 Ogees, 1 Snipes Bill, 4 Quarter Rounds, 4 Sash Plains, 3 Bead Ditto, 6 Ovelos.” To these a cabinetmaker would have added ogive, reed, flute, beaded flute, fillet and fascia combinations, and other molding profiles favored on eighteenth-century furniture. Remembering that a number of these shapes too, might have been needed in more than one size, Dickinson’s 81 planes begin to seem hardly enough.
Several shapes of molding planes, with the irons of corresponding profile; also a moving fillister in the lower part of the picture. This illustration and the two that follow it are taken from a three-volume eighteenth-century French manual on woodworking by Andre-Jacob Roubo.
The familiar carpenter’s handsaw, with a blade wide and stiff enough to cut on the push stroke, was not unknown in colonial times and Dickinson apparently had one. But various kinds of frame and back saws were much more common. Dickinson had one large frame saw—its valuation at £5 indicates it must have been of good quality as well as good-sized—that was probably a pit saw. This was a two-man affair for ripping logs into boards. A whip saw (one of these was also listed) was like a modern two-man crosscut saw.
Dickinson also possessed a small frame saw, a bow saw, a “tenant” (tenon) saw, a panel saw, a sash saw, and three dovetail saws. The latter three, called “dovetailed” in the inventory, were back saws with short blades and very fine teeth. The tenon saw might have been either a back or a frame saw, as both varieties were used in cutting the tenons for mortise joints. Vagaries in craft nomenclature leave us in doubt about the precise appearance of many tools, including Dickinson’s panel and sash saws.
Except that it was doubtless made of wood rather than steel and had a somewhat different chuck, Dickinson’s bit stock would have resembled the boring brace in any modern tool box. His “20 bitts,” however, probably lacked the spiral shank of their present descendants and thus required considerably more skill on the part of the user to bore a straight hole.
Chisels and gouges, of which Dickinson had a total of 53, have not changed in appearance or structure over many centuries. Like other tools, they come in different shapes and sizes and some possess special designs for special purposes. 26 Of Dickinson’s collection, 47 were carving chisels and gouges, which argues that he did his own carving. However, one of the two carvers known to have worked in eighteenth-century Williamsburg was George Hamilton, a journeyman in Dickinson’s shop in 1774. The other, James Wilson, worked with or for Anthony Hay some twenty years earlier.
Dickinson’s “6 Morticeing Chissels”—along with his “tenant” saw and fitting planes—serve as reminders that the basic techniques of cabinetmaking have likewise changed little through the years.
In the making of an article of furniture the component pieces must be attached to each other at various points: sometimes side-by-side with grain running parallel, sometimes end to end, or end into side, or crossing one another. At each juncture the cabinetmaker had his choice of a number of joints that were appropriate in such a situation. The eighteenth-century craftsman knew them all and was skilled in the making of all those used today: butt, lap, rabbet, tongue and groove, mortise and tenon, mitre, dado, dovetail, and their numerous combinations and variations.
In cabinetmaking the most useful joints are undoubtedly the mortise and tenon and the dovetail, the former for joining structural members at right angles, the latter for holding together adjacent sides of drawers, chests, boxes, and the like. Both kinds of joints are very strong if well made, weak if poorly fitted. Skill and experience, thus, were (and are) prerequisite to good furniture making.
Some veneering appeared on colonial furniture at least by the beginning of the eighteenth century. But it was not widely practiced, in part because fine cabinet woods were relatively cheap and in part, no doubt, because making veneer by hand required a good deal of skilled work and labor was relatively expensive. In any case, it was the large and otherwise unadorned surfaces of Hepplewhite and 27 Sheraton furniture that invited matched veneering. Since these fashions came to America after the Revolution and after Williamsburg had passed its apogee, Williamsburg cabinetmakers probably did little if any veneering.
Two men with a good-sized but fine-toothed frame saw here cut a log into thin slices of veneer.
ROUBO
Applying a finish to woodwork is an ancient art and has always served two purposes: to give the wood a protective coating and to enhance its appearance. By the eighteenth century the techniques for applying several different kinds of finish were well understood and widely used in the colonial cabinet shop.
Painting, generally limited to the cheapest sort of furniture, was little practiced by quality cabinetmakers. The imitation of oriental lacquer called japanning was not common in the colonies, and in any case was the province of the japanner. The cabinetmaker favored oil, wax, or varnish finishes to produce a hard, transparent, and glassy-smooth surface.
To prepare the surface of the wood, colonial cabinetmakers had planes, scrapers, glasspaper, and sandpaper—the latter two available by the late eighteenth century and probably much before that. Stains were used to enrich the 28 natural color and emphasize the grain of the wood, and pulverized chalk, plaster of Paris, or the like was used to fill the pores of coarse-grained woods.
Wax, usually beeswax melted and mixed with turpentine, was cheap, easy to apply, and easy to renew. Rubbed on, allowed to dry, and polished with a cloth—and repeated by generations of industrious housewives or servants—wax produced a beautiful finish, especially on mahogany or cherry.
Linseed oil thinned with turpentine was frequently the only finish applied on these and other hard, close-grained woods. The mixture was applied generously, allowed to stand for several hours, and wiped off. The surface was then rubbed for hours with the bare hand or a piece of cloth or felt, and the process was repeated again and again until the wood showed a fine rich sheen.
As the wood absorbed the oil its grain rose slightly and had to be smoothed down again between coats. Sheraton advocated a technique that combined filling, oiling, and smoothing in one operation: the oil was poured on and allowed to stand, then sprinkled with fine brick dust and rubbed with a cloth. The brick dust filled the grain and combined with the oil to form a putty that was mildly abrasive and would, Sheraton said, “secure a fine polish by continued rubbing.”
Eighteenth-century cabinetmakers employed both oil varnishes and spirit varnishes. The former was made by dissolving a natural resin—copal was one of the most commonly used—in hot oil and thinning with turpentine. The only spirit varnish of importance was that made of lac—in the form of stick lac, seed lac, or shell lac—dissolved in alcohol. (Lac is the resinous secretion of an insect encrusted on the twigs of certain East Indian trees.)
The application of a varnish required less labor than wax or oil but more skill. It was flowed on, allowed to dry, and rubbed down with a fine abrasive. This was repeated with as many coats as might be necessary, and wax applied as a 29 final coat. Eighteenth-century Anglo-American cabinetmakers seem to have preferred lac varnishes, particularly shellac, for walnut furniture, wax and oil finishes for mahogany.
The elegant grounds of the Governor’s Palace in Williamsburg seem at first glance a most unlikely site for a cabinetmaker’s shop, especially in the time of Lord Dunmore. His Majesty’s last and unlamented viceroy in Virginia was no basement do-it-yourselfer. But after the Revolution his claim for the value of lost possessions included “A quantity of Mahogany and other Woods; with tools for four Cabinet Makers.”
Although Dunmore’s tools and lumber were probably destined for the plantation he was seating near Warm Springs as a private venture, the possibility cannot be dismissed that some furniture work was done at the Palace. At one spot on the grounds several items of cabinet hardware have been excavated. And the amount of furniture in an establishment as big as the Palace could no doubt have kept a man busy just repairing the everyday wear and tear.
Whatever the situation under the royal governors, however, the practice in 1776 was to have such work done in the shops of the town’s private entrepreneurs. When Patrick Henry was about to take up residence as the independent commonwealth’s first chief executive, the state government issued warrants to several Williamsburg cabinetmakers for making or repairing Palace furniture. Honey and Harrocks received a little more than £19 for mending 28 chairs there; £21 went to a certain Richard Booker (about whose identity there remains great uncertainty) for making some chairs; and our friend Edmund Dickinson took in £92 “for furniture furnished the Pallace.”
Judging by Bucktrout’s charge of £25 per dozen for straight chairs and £16 for a mahogany desk and bookcase, Dickinson was dealing with something on the order of 30 35 chairs or their equivalent in other kinds of furniture. It would appear that his shop, the same one where Anthony Hay and Benjamin Bucktrout had earlier plied their craft, was the largest such establishment in Williamsburg at the time. It has now been reconstructed, its dimensions precisely fixed by surviving foundations, and furnished as an operating craft shop according to indications of the Dickinson inventory, archaeological findings on the site, and other information.
This eighteenth-century woodworker’s bench resembles its twentieth-century counterpart in
every essential feature of construction and equipment, though differing in various details.
ROUBO
The original shop was built about 1750 on the bank of the small stream that still flows through the Nicholson 31 Street property. Hay bought it in 1756 and some ten years later built an addition on piers over the stream. His reason for this seemingly awkward arrangement cannot now be ascertained. No evidence indicates that he ever installed a water wheel, and in any event the stream’s flow could have operated a lathe only in the very wettest weather.
It’s an ill waterway, however, that flows nobody good! This one served a double end. In the first place, it provided a convenient place for the cabinetmakers’ apprentices to dump the trash that accumulated in the shop. And in the second place, the damp silt of the stream bed effectively preserved that trash against decay, transforming it into a twentieth-century treasure trove for today’s archaeologists.
Mention has already been made of the woodworking tools and fragments of cabinet hardware excavated at the site of the shop. Diggers also found a few component pieces of a table and chairs. Indeed the Anthony Hay shop, house, kitchen, and well have proved to be the richest archaeological dig in Williamsburg. Besides cabinet items, the colonial artifacts include domestic glass and ceramic wares, harness hardware, shoe buckles, garden tools, table utensils, and a large number of gun flints. The last, along with bits of several weapons, recall the period during the Revolution when the shop was converted into an armory.
The formal duties of an apprentice and his master toward each other were spelled out in an indenture signed by each when the apprenticeship began. Dickinson was probably an apprentice to Hay and may have been a journeyman employee of Bucktrout in the same shop before himself becoming its master. In turn, Dickinson took on an apprentice by the name of James Tyrie who would help him and be taught the cabinetmaking craft. In the agreement between them the master undertook that:
... his said Apprentice in the same art of a Cabinet Maker which he useth by the best means that he can 32 shall teach and instruct or cause to be taught and instructed finding unto the said Apprentice sufficient Meat Drink Washing Lodging &c during the said term of five years.
For his part, Tyrie pledged that he:
... his said Master shall faithfully serve his secrets keep his lawful commands every where gladly do, he shall do no damage to his said Master nor see to be done of others, but that he to his power shall let or forth with give warning to his said Master of the same he shall not waste the Goods of his said Master nor lend them unlawfully to any he shall not commit fornication nor contract Matrimony within the said term He shall not play at Cards Dice Tables or any other unlawful Games whereby his said Master may have any loss, with his own Goods or others during the said term, without Licence of his said Master He shall neither buy nor sell He shall not Haunt Taverns nor Play Houses nor absent himself from his said Masters Service Day nor Night unlawfully But in all things as a faithful Apprentice he shall Behave himself towards his said Master and all his, during the said term.
What happened to Tyrie we do not know. Perhaps the coming of the War for Independence holds the key to his destiny; perhaps he, like many another apprentice, ran away from his master. One of Bucktrout’s apprentices, David Davis, took off one day wearing a whole new suit of clothing and new shoes. The important circumstance, however, was that an apprenticeship of up to seven years was the normal—indeed the only—way for a boy to gain entry into the business world. It was also the normal source to the master of a constantly renewed supply of cheap, unskilled labor.
Artifacts from the site of Anthony Hay’s cabinetmaking shop: (1) unfinished table leg, walnut; (2) fragment of an oboe, boxwood with brass stops; (3) crest rail of a chair in the Chippendale style; (4 to 12) cabinet fittings, brass, including ornamental column base from a tall case clock (6) and a chair caster (7); and (13 to 18) carpenter’s tools, all of iron and heavily encrusted with rust. Redrawn from photographs.
Three other sources of help were available to him: wage-earning journeymen, indentured servants, and slaves—all of whom might be skilled workers in the craft. Williamsburg cabinetmakers advertised from time to time in the Virginia Gazette for the services of capable journeymen, a circumstance that argues both the need of the proprietors for help and the availability of potential helpers. As to any specific workers they may have acquired in this category, the record is silent.
Other advertisements listed joiners and cabinetmakers among the cargoes of ships bringing indentured passengers whose services for a period were to be auctioned off to the highest bidder or sold for a fixed fee. But no evidence has been found that any Williamsburg cabinetmaker augmented his work force with indentured servants.
Formal apprenticeship of Negro slaves was not uncommon, and many examples can be cited of Negroes who became skilled workers even without the formality. The largest number in and around Williamsburg seem to have been carpenters, but other crafts had skilled and semi-skilled practitioners who were slaves. Peter Scott, for example, owned “two Negroes, bred to the Business of a Cabinet-maker,” and Anthony Hay owned a “very good” slave cabinetmaker even after he turned from that trade to innkeeping. However, no instance has come to light from colonial Virginia of a Negro, even a freedman, who became a journeyman or master of any craft.
As we have seen, Virginians who wanted fine furniture probably ordered it from England. But competition from across the Atlantic was not the local cabinetmaker’s only burden. A very large amount of furniture left the busy shops of New England, New York, and Philadelphia in the eighteenth century, consigned to southern ports or the West Indies. No precise figure can be stated for the size or importance of this coastwise trade, or for its importance in the life of Williamsburg cabinetmakers; it could not have made things easier for them.
The interior of an eighteenth-century French marquetry establishment, with the workers using
various tools. At the left is a type of vise called a “donkey”; against the wall may be seen a
large cabinet bookcase, a slant-top desk, and a chest of drawers. These would have been made
in a cabinet shop and brought here for inlay decoration.
DIDEROT
Whether outside competition was the cause, or simply the narrowness of the Virginia market in the first place, Williamsburg cabinetmakers—like the practitioners of other crafts—found ways to augment their incomes. Anthony Hay became proprietor of the Raleigh Tavern and Benjamin Bucktrout turned storekeeper and state functionary.
The change in Hay’s case was clearly not motivated by poverty; he must have been well-to-do or at any rate well respected to have acquired backing, perhaps to the extent of £4000, to buy the Raleigh—and without selling his house, cabinet shop, and timber yard.
Coffin-making was a normal part of the cabinetmaker’s business, and many cabinetmakers took what was the logical next step of serving also as funeral directors. When the popular Lord Botetourt, Governor Dunmore’s predecessor, died in Williamsburg, two of the town’s cabinetmakers 36 were involved in the burial. Joshua Kendall made the three nested coffins, and Benjamin Bucktrout provided the hearse and four days worth of attendance in connection with the ceremonies.
Bucktrout was one of the several Williamsburg cabinetmakers who did upholstering; he also sold upholstery materials in his shop on Francis Street. By 1774 that shop had become a store—stocked with beer, cheese, spices, woolens and cottons, hats, boots, women’s and children’s shoes, gloves, guns, pistols, saddles, whips, and a number of other things—and Bucktrout had to advertise that he still did cabinet work.
Eventually, however, Bucktrout seems to have abandoned his own business to put all his time and effort into serving as purveyor to the public hospitals of the state. A powder mill he devised and erected in or near Williamsburg early in the Revolution did not function for lack of saltpeter, and Bucktrout’s efforts to gain compensation or subsidy from the Assembly were in vain.
Whether or not he turned Tory in 1779—and there is one accusation on record to that effect—he was back in Williamsburg soon after the defeat of Cornwallis, and remained a resident of the town for another 30 years. In 1804 he was appointed town surveyor, thereby capping a career that for versatility was matched by its virility. The widower Bucktrout must have been about 60 years old when, in 1797, he took to wife a young girl by the name of Mary Bruce. Before his death in 1812 she bore him four children, the second receiving the name Horatio.
A century and a quarter later—in 1928—another Horatio Bucktrout sold the family undertaking establishment and thus brought to an end the Bucktrout saga in Williamsburg. The story of cabinetmaking as an active eighteenth-century craft in Williamsburg had ended long before, of course.
In addition to Benjamin Bucktrout, Edmund Dickinson, Anthony Hay, and Peter Scott—all of whom have been discussed at some length in the preceding pages—the following are believed to complete the list of known Williamsburg cabinetmakers in the eighteenth century.
Richard Booker. A cabinetmaker in Williamsburg in 1773, and for three or fours years thereafter, and again or still in 1792. The records are full of men by that name, and their identities are difficult to sort out.
John Crump. Was associated in 1775 with Richard Booker, in what capacity is not known.
Richard Harrocks. Had a shop in 1776 and 1777, part of the time in partnership with James Honey.
James Honey (died 1787). Was a house joiner rather than cabinetmaker, but was briefly in the cabinetmaking business with Richard Harrocks.
William Kennedy. In 1769 was briefly a partner of Bucktrout; then had his own business in the Pelham shop on Francis Street, but his activities there are unknown.
Matthew Moody, Jr. Had cabinetmaking business around 1764 or 1765 and later was a carpenter.
John Ormeston. Was in Williamsburg from 1763 to 1766; may have been a cabinetmaker or a riding-chair maker or both.
Thomas Orton (died 1778). His name appears in the records once with the word cabinetmaker appended to it.
James Spiers. Coachmaker, cabinetmaker, upholsterer from 1744 to about 1755; his shop may have been near that of Scott.
The number of books in print on how to make furniture is almost endless; the determined do-it-yourself antique-maker will want to start with Joseph Moxon, Mechanick Exercises (London, 1683); Thomas Chippendale, Gentleman and Cabinet-Maker’s Director (London, 1754); and Thomas Sheraton, The Cabinet Dictionary (London, 1803). Among more recent publications, space permits mention of three—not necessarily the best or most complete, but at least representative: F. E. Hoard and A. W. Marlow, The Cabinetmaker’s Treasury (New York, Macmillan, 1952); Lester Margon, Construction of American Furniture Treasures (New York, Home Craftsman, 1949); and Raymond F. Yates, Antique Reproductions for the Home Craftsman (New York, Whittlesey House, 1950). The last named includes a discussion of old-time hand tools and techniques; although not strictly concerned with cabinetmaking tools, Henry D. Mercer, Ancient Carpenters’ Tools (Doylestown, Pa., Doylestown Hist. Soc., 1929) is very informative.
On the historical aspects of furniture and fashion there are, again, a multitude of books; a good start can be made with Frank Davis, A Picture History of Furniture (New York, Macmillan, 1958) and Hermann Schmitz, editor, The Encyclopedia of Furniture (New York, Praeger, 1957, new edition). On English seventeenth- and eighteenth-century styles Ralph Edwards and L. G. G. Ramsey, editors, Connoisseur Period Guides (London, The Connoisseur, 1956 et seq.) and Robert W. Symonds, Furniture Making in Seventeenth and Eighteenth Century England (London, The Connoisseur, 1955) are indispensable. Joseph 40 Downs, American Furniture, Queen Anne and Chippendale Periods (New York, Macmillan, 1952) and Albert Sack, Fine Points of Furniture (New York, Crown, 1950) are essential for the colonial story in furniture design.
Local developments—Virginia and elsewhere—will be found in the article by Helen Comstock, “Furniture of Virginia, North Carolina, Georgia, and Kentucky,” in Antiques Magazine, LXI (January, 1952). That magazine’s recent compilation entitled The Antiques Treasury (New York, Dutton, 1959) has useful information and many illustrations of furniture and other furnishings in Williamsburg and in a number of other American museums and restorations.
As to the craftsmen themselves and their life in colonial times, the first place to look is Ethel Hall Bjerkoe, The Cabinetmakers of America (Garden City, N. Y., Doubleday, 1957); and for light on the general, social, and economic status of craft workers Carl Bridenbaugh, The Colonial Craftsman (New York, N. Y. Univ. Press, 1950) will be found helpful. Seat of Empire, by the same author; Hunter D. Farish, editor, The Journal ... of Philip Vickers Fithian; and Edmund S. Morgan, Virginians at Home (all published by Colonial Williamsburg, in 1950, 1958, and 1952 respectively) will provide lively background for the local phases of the picture.
The Cabinetmaker in Eighteenth-Century Williamsburg is based largely on an unpublished monograph by Mills Brown, formerly of the Colonial Williamsburg research staff. It has been prepared with the assistance of Thomas K. Ford, editor, Colonial Williamsburg publications department. Benjamin Bucktrout’s bill to Robert Carter of Nomini Hall, quoted on page 12, is printed by permission of the Virginia Historical Society.
End of the Project Gutenberg EBook of The Cabinetmaker in Eighteenth-Century
Williamsburg, by Mills Brown
*** END OF THIS PROJECT GUTENBERG EBOOK CABINETMAKER IN 18TH CENT WILLIAMSBURG ***
***** This file should be named 57211-h.htm or 57211-h.zip *****
This and all associated files of various formats will be found in:
http://www.gutenberg.org/5/7/2/1/57211/
Produced by Stephen Hutcheson and the Online Distributed
Proofreading Team at http://www.pgdp.net
Updated editions will replace the previous one--the old editions will
be renamed.
Creating the works from print editions not protected by U.S. copyright
law means that no one owns a United States copyright in these works,
so the Foundation (and you!) can copy and distribute it in the United
States without permission and without paying copyright
royalties. Special rules, set forth in the General Terms of Use part
of this license, apply to copying and distributing Project
Gutenberg-tm electronic works to protect the PROJECT GUTENBERG-tm
concept and trademark. Project Gutenberg is a registered trademark,
and may not be used if you charge for the eBooks, unless you receive
specific permission. If you do not charge anything for copies of this
eBook, complying with the rules is very easy. You may use this eBook
for nearly any purpose such as creation of derivative works, reports,
performances and research. They may be modified and printed and given
away--you may do practically ANYTHING in the United States with eBooks
not protected by U.S. copyright law. Redistribution is subject to the
trademark license, especially commercial redistribution.
START: FULL LICENSE
THE FULL PROJECT GUTENBERG LICENSE
PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK
To protect the Project Gutenberg-tm mission of promoting the free
distribution of electronic works, by using or distributing this work
(or any other work associated in any way with the phrase "Project
Gutenberg"), you agree to comply with all the terms of the Full
Project Gutenberg-tm License available with this file or online at
www.gutenberg.org/license.
Section 1. General Terms of Use and Redistributing Project
Gutenberg-tm electronic works
1.A. By reading or using any part of this Project Gutenberg-tm
electronic work, you indicate that you have read, understand, agree to
and accept all the terms of this license and intellectual property
(trademark/copyright) agreement. If you do not agree to abide by all
the terms of this agreement, you must cease using and return or
destroy all copies of Project Gutenberg-tm electronic works in your
possession. If you paid a fee for obtaining a copy of or access to a
Project Gutenberg-tm electronic work and you do not agree to be bound
by the terms of this agreement, you may obtain a refund from the
person or entity to whom you paid the fee as set forth in paragraph
1.E.8.
1.B. "Project Gutenberg" is a registered trademark. It may only be
used on or associated in any way with an electronic work by people who
agree to be bound by the terms of this agreement. There are a few
things that you can do with most Project Gutenberg-tm electronic works
even without complying with the full terms of this agreement. See
paragraph 1.C below. There are a lot of things you can do with Project
Gutenberg-tm electronic works if you follow the terms of this
agreement and help preserve free future access to Project Gutenberg-tm
electronic works. See paragraph 1.E below.
1.C. The Project Gutenberg Literary Archive Foundation ("the
Foundation" or PGLAF), owns a compilation copyright in the collection
of Project Gutenberg-tm electronic works. Nearly all the individual
works in the collection are in the public domain in the United
States. If an individual work is unprotected by copyright law in the
United States and you are located in the United States, we do not
claim a right to prevent you from copying, distributing, performing,
displaying or creating derivative works based on the work as long as
all references to Project Gutenberg are removed. Of course, we hope
that you will support the Project Gutenberg-tm mission of promoting
free access to electronic works by freely sharing Project Gutenberg-tm
works in compliance with the terms of this agreement for keeping the
Project Gutenberg-tm name associated with the work. You can easily
comply with the terms of this agreement by keeping this work in the
same format with its attached full Project Gutenberg-tm License when
you share it without charge with others.
1.D. The copyright laws of the place where you are located also govern
what you can do with this work. Copyright laws in most countries are
in a constant state of change. If you are outside the United States,
check the laws of your country in addition to the terms of this
agreement before downloading, copying, displaying, performing,
distributing or creating derivative works based on this work or any
other Project Gutenberg-tm work. The Foundation makes no
representations concerning the copyright status of any work in any
country outside the United States.
1.E. Unless you have removed all references to Project Gutenberg:
1.E.1. The following sentence, with active links to, or other
immediate access to, the full Project Gutenberg-tm License must appear
prominently whenever any copy of a Project Gutenberg-tm work (any work
on which the phrase "Project Gutenberg" appears, or with which the
phrase "Project Gutenberg" is associated) is accessed, displayed,
performed, viewed, copied or distributed:
This eBook is for the use of anyone anywhere in the United States and
most other parts of the world at no cost and with almost no
restrictions whatsoever. You may copy it, give it away or re-use it
under the terms of the Project Gutenberg License included with this
eBook or online at www.gutenberg.org. If you are not located in the
United States, you'll have to check the laws of the country where you
are located before using this ebook.
1.E.2. If an individual Project Gutenberg-tm electronic work is
derived from texts not protected by U.S. copyright law (does not
contain a notice indicating that it is posted with permission of the
copyright holder), the work can be copied and distributed to anyone in
the United States without paying any fees or charges. If you are
redistributing or providing access to a work with the phrase "Project
Gutenberg" associated with or appearing on the work, you must comply
either with the requirements of paragraphs 1.E.1 through 1.E.7 or
obtain permission for the use of the work and the Project Gutenberg-tm
trademark as set forth in paragraphs 1.E.8 or 1.E.9.
1.E.3. If an individual Project Gutenberg-tm electronic work is posted
with the permission of the copyright holder, your use and distribution
must comply with both paragraphs 1.E.1 through 1.E.7 and any
additional terms imposed by the copyright holder. Additional terms
will be linked to the Project Gutenberg-tm License for all works
posted with the permission of the copyright holder found at the
beginning of this work.
1.E.4. Do not unlink or detach or remove the full Project Gutenberg-tm
License terms from this work, or any files containing a part of this
work or any other work associated with Project Gutenberg-tm.
1.E.5. Do not copy, display, perform, distribute or redistribute this
electronic work, or any part of this electronic work, without
prominently displaying the sentence set forth in paragraph 1.E.1 with
active links or immediate access to the full terms of the Project
Gutenberg-tm License.
1.E.6. You may convert to and distribute this work in any binary,
compressed, marked up, nonproprietary or proprietary form, including
any word processing or hypertext form. However, if you provide access
to or distribute copies of a Project Gutenberg-tm work in a format
other than "Plain Vanilla ASCII" or other format used in the official
version posted on the official Project Gutenberg-tm web site
(www.gutenberg.org), you must, at no additional cost, fee or expense
to the user, provide a copy, a means of exporting a copy, or a means
of obtaining a copy upon request, of the work in its original "Plain
Vanilla ASCII" or other form. Any alternate format must include the
full Project Gutenberg-tm License as specified in paragraph 1.E.1.
1.E.7. Do not charge a fee for access to, viewing, displaying,
performing, copying or distributing any Project Gutenberg-tm works
unless you comply with paragraph 1.E.8 or 1.E.9.
1.E.8. You may charge a reasonable fee for copies of or providing
access to or distributing Project Gutenberg-tm electronic works
provided that
* You pay a royalty fee of 20% of the gross profits you derive from
the use of Project Gutenberg-tm works calculated using the method
you already use to calculate your applicable taxes. The fee is owed
to the owner of the Project Gutenberg-tm trademark, but he has
agreed to donate royalties under this paragraph to the Project
Gutenberg Literary Archive Foundation. Royalty payments must be paid
within 60 days following each date on which you prepare (or are
legally required to prepare) your periodic tax returns. Royalty
payments should be clearly marked as such and sent to the Project
Gutenberg Literary Archive Foundation at the address specified in
Section 4, "Information about donations to the Project Gutenberg
Literary Archive Foundation."
* You provide a full refund of any money paid by a user who notifies
you in writing (or by e-mail) within 30 days of receipt that s/he
does not agree to the terms of the full Project Gutenberg-tm
License. You must require such a user to return or destroy all
copies of the works possessed in a physical medium and discontinue
all use of and all access to other copies of Project Gutenberg-tm
works.
* You provide, in accordance with paragraph 1.F.3, a full refund of
any money paid for a work or a replacement copy, if a defect in the
electronic work is discovered and reported to you within 90 days of
receipt of the work.
* You comply with all other terms of this agreement for free
distribution of Project Gutenberg-tm works.
1.E.9. If you wish to charge a fee or distribute a Project
Gutenberg-tm electronic work or group of works on different terms than
are set forth in this agreement, you must obtain permission in writing
from both the Project Gutenberg Literary Archive Foundation and The
Project Gutenberg Trademark LLC, the owner of the Project Gutenberg-tm
trademark. Contact the Foundation as set forth in Section 3 below.
1.F.
1.F.1. Project Gutenberg volunteers and employees expend considerable
effort to identify, do copyright research on, transcribe and proofread
works not protected by U.S. copyright law in creating the Project
Gutenberg-tm collection. Despite these efforts, Project Gutenberg-tm
electronic works, and the medium on which they may be stored, may
contain "Defects," such as, but not limited to, incomplete, inaccurate
or corrupt data, transcription errors, a copyright or other
intellectual property infringement, a defective or damaged disk or
other medium, a computer virus, or computer codes that damage or
cannot be read by your equipment.
1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the "Right
of Replacement or Refund" described in paragraph 1.F.3, the Project
Gutenberg Literary Archive Foundation, the owner of the Project
Gutenberg-tm trademark, and any other party distributing a Project
Gutenberg-tm electronic work under this agreement, disclaim all
liability to you for damages, costs and expenses, including legal
fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT
LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE
PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE
TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE
LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR
INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGE.
1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a
defect in this electronic work within 90 days of receiving it, you can
receive a refund of the money (if any) you paid for it by sending a
written explanation to the person you received the work from. If you
received the work on a physical medium, you must return the medium
with your written explanation. The person or entity that provided you
with the defective work may elect to provide a replacement copy in
lieu of a refund. If you received the work electronically, the person
or entity providing it to you may choose to give you a second
opportunity to receive the work electronically in lieu of a refund. If
the second copy is also defective, you may demand a refund in writing
without further opportunities to fix the problem.
1.F.4. Except for the limited right of replacement or refund set forth
in paragraph 1.F.3, this work is provided to you 'AS-IS', WITH NO
OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.
1.F.5. Some states do not allow disclaimers of certain implied
warranties or the exclusion or limitation of certain types of
damages. If any disclaimer or limitation set forth in this agreement
violates the law of the state applicable to this agreement, the
agreement shall be interpreted to make the maximum disclaimer or
limitation permitted by the applicable state law. The invalidity or
unenforceability of any provision of this agreement shall not void the
remaining provisions.
1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the
trademark owner, any agent or employee of the Foundation, anyone
providing copies of Project Gutenberg-tm electronic works in
accordance with this agreement, and any volunteers associated with the
production, promotion and distribution of Project Gutenberg-tm
electronic works, harmless from all liability, costs and expenses,
including legal fees, that arise directly or indirectly from any of
the following which you do or cause to occur: (a) distribution of this
or any Project Gutenberg-tm work, (b) alteration, modification, or
additions or deletions to any Project Gutenberg-tm work, and (c) any
Defect you cause.
Section 2. Information about the Mission of Project Gutenberg-tm
Project Gutenberg-tm is synonymous with the free distribution of
electronic works in formats readable by the widest variety of
computers including obsolete, old, middle-aged and new computers. It
exists because of the efforts of hundreds of volunteers and donations
from people in all walks of life.
Volunteers and financial support to provide volunteers with the
assistance they need are critical to reaching Project Gutenberg-tm's
goals and ensuring that the Project Gutenberg-tm collection will
remain freely available for generations to come. In 2001, the Project
Gutenberg Literary Archive Foundation was created to provide a secure
and permanent future for Project Gutenberg-tm and future
generations. To learn more about the Project Gutenberg Literary
Archive Foundation and how your efforts and donations can help, see
Sections 3 and 4 and the Foundation information page at
www.gutenberg.org
Section 3. Information about the Project Gutenberg Literary Archive Foundation
The Project Gutenberg Literary Archive Foundation is a non profit
501(c)(3) educational corporation organized under the laws of the
state of Mississippi and granted tax exempt status by the Internal
Revenue Service. The Foundation's EIN or federal tax identification
number is 64-6221541. Contributions to the Project Gutenberg Literary
Archive Foundation are tax deductible to the full extent permitted by
U.S. federal laws and your state's laws.
The Foundation's principal office is in Fairbanks, Alaska, with the
mailing address: PO Box 750175, Fairbanks, AK 99775, but its
volunteers and employees are scattered throughout numerous
locations. Its business office is located at 809 North 1500 West, Salt
Lake City, UT 84116, (801) 596-1887. Email contact links and up to
date contact information can be found at the Foundation's web site and
official page at www.gutenberg.org/contact
For additional contact information:
Dr. Gregory B. Newby
Chief Executive and Director
gbnewby@pglaf.org
Section 4. Information about Donations to the Project Gutenberg
Literary Archive Foundation
Project Gutenberg-tm depends upon and cannot survive without wide
spread public support and donations to carry out its mission of
increasing the number of public domain and licensed works that can be
freely distributed in machine readable form accessible by the widest
array of equipment including outdated equipment. Many small donations
($1 to $5,000) are particularly important to maintaining tax exempt
status with the IRS.
The Foundation is committed to complying with the laws regulating
charities and charitable donations in all 50 states of the United
States. Compliance requirements are not uniform and it takes a
considerable effort, much paperwork and many fees to meet and keep up
with these requirements. We do not solicit donations in locations
where we have not received written confirmation of compliance. To SEND
DONATIONS or determine the status of compliance for any particular
state visit www.gutenberg.org/donate
While we cannot and do not solicit contributions from states where we
have not met the solicitation requirements, we know of no prohibition
against accepting unsolicited donations from donors in such states who
approach us with offers to donate.
International donations are gratefully accepted, but we cannot make
any statements concerning tax treatment of donations received from
outside the United States. U.S. laws alone swamp our small staff.
Please check the Project Gutenberg Web pages for current donation
methods and addresses. Donations are accepted in a number of other
ways including checks, online payments and credit card donations. To
donate, please visit: www.gutenberg.org/donate
Section 5. General Information About Project Gutenberg-tm electronic works.
Professor Michael S. Hart was the originator of the Project
Gutenberg-tm concept of a library of electronic works that could be
freely shared with anyone. For forty years, he produced and
distributed Project Gutenberg-tm eBooks with only a loose network of
volunteer support.
Project Gutenberg-tm eBooks are often created from several printed
editions, all of which are confirmed as not protected by copyright in
the U.S. unless a copyright notice is included. Thus, we do not
necessarily keep eBooks in compliance with any particular paper
edition.
Most people start at our Web site which has the main PG search
facility: www.gutenberg.org
This Web site includes information about Project Gutenberg-tm,
including how to make donations to the Project Gutenberg Literary
Archive Foundation, how to help produce our new eBooks, and how to
subscribe to our email newsletter to hear about new eBooks.