Produced by PM for Bureau of American Ethnology, The
Internet Archive (American Libraries) and the Online
Distributed Proofreading Team at http://www.pgdp.net (This
file was produced from images generously made available
by the Bibliothèque nationale de France (BnF/Gallica) at
http://gallica.bnf.fr)









  STONE ART

  BY

  GERARD FOWKE




CONTENTS


  Page

  Introduction                                                      57
          Basis for the work                                        57
          Classification of objects and materials                   57

  The arts and their distribution                                   60
          Districts                                                 60
          Descriptive terms                                         62
      Ground and pecked articles                                    62
          Grooved axes                                              62
          Celts                                                     72
          Gouges                                                    82
          Chisels and scrapers                                      83
          Chipped celts                                             86
          Hematite celts                                            86
          Pestles                                                   87
          Pitted stones                                             91
          Cupped stones                                             91
          Mullers                                                   93
          Grinding and polishing stones                             93
          Hammerstones                                              94
          Grooved stones other than axes                            95
          Mortars                                                   96
          Sinkers                                                   97
          Perforated stones                                         98
          Discoidal stones                                          99
          Spuds                                                    109
          Plummets                                                 110
          Cones                                                    113
          Hemispheres                                              114
          Paint stones                                             115
          Ceremonial stones                                        115
              Functions and purposes                               115
              Gorgets                                              116
              Banner stones                                        120
              Boat-shape stones                                    124
              Picks                                                125
              Spool-shape ornaments                                125
              Bird-shape stones                                    125
          Shaft rubbers                                            126
          Tubes                                                    126
          Pipes                                                    128
      Chipped stone articles                                       132
          Materials and manufacture                                132
          Spades                                                   133
          Turtlebacks                                              136
      Smaller chipped implements                                   139
          Materials and modes of manufacture                       139
          Classification of the implements                         142
          Stemless flints                                          143
            Characters and uses                                    143
            Larger implements                                      144
            Smaller objects                                        147
          Stemmed flints                                           150
            Straight or taper stems                                150
            Expanding stems                                        156
          Perforators                                              164
            Character and uses                                     164
            Stemless forms                                         165
            Stemmed forms                                          167
          Blunt arrowheads, or “bunts”                             168
          Scrapers                                                 169
            Stemmed                                                169
            Stemless                                               169
          Cores                                                    170
          Flakes                                                   171
          Miscellaneous forms                                      174
        Notes on beveled flints                                    177




ILLUSTRATIONS


  Museum number Page

  FIG. 29. Grooved ax, showing groove projections (82379)           63

       30. Grooved ax, showing pointed edge (99318)                 64

       31. Grooved ax, showing groove entirely around (83360)       65

       32. Grooved ax, slender, showing groove entirely around
             (116240)                                               65

       33. Grooved ax, showing grooved back                         66

       34. Grooved ax, showing grooved back (90512)                 66

       35. Grooved ax, showing rounded back (71575)                 67

       36. Grooved ax, showing flattened curved back                68

       37. Grooved ax, showing flattened straight back (71258)      68

       38. Grooved ax, Keokuk type (71566)                          69

       39. Grooved ax, showing adze form (84348)                    69

       40. Grooved ax, showing diagonal groove (72211)              69

       41. Grooved ax, showing wide edge (90862)                    69

       42. Grooved ax, showing curved edge (91746)                  70

       43. Grooved ax, showing single groove projection (62907)     70

       44. Grooved adze (114526)                                    71

       45. Grooved adze, showing curved blade (131483)              71

       46. Notched ax, showing polished edge (62753)                72

       47. Celt, showing blade thick near edge (71413)              73

       48. Celt, showing blade thick near edge (91518)              73

       49. Celt, showing long, slender form (114494)                74

       50. Celt, nearly round section (65652)                       75

       51. Celt, nearly round section (65661)                       75

       52. Celt, showing nearly diamond section (65698)             76

       53. Celt (112509)                                            77

       54. Celt (83111)                                             77

       55. Celt (82917)                                             77

       56. Celt, showing “bell-shape” and roughening for handle
             (Tho. 7882)                                            78

       57. Celt, showing rectangular section (114151)               78

       58. Celt, showing wedge-shape (98427)                        79

       59. Celt, showing half-elliptical section (72059)            79

       60. Celt, showing half-elliptical section (65440)            81

       61. Celt, showing concave sides (115504)                     81

       62. Thin, polished celt (83056)                              82

       63. Thin, polished celt (114021)                             82

       64. Thin, polished celt (114157)                             82

       65. Celt, showing thin, gouge-form edge (92034)              83

       66. Celt, chisel-form (91418)                                83

       67. Celt, chisel-form (82464)                                83

       68. Celt, chisel-form (131697)                               83

       69. Celt, chisel-form (82949)                                84

       70. Celt, chisel-form (116300)                               84

       71. Celt, showing scraper-form edge                          85

       72. Scraper (83346)                                          85

       73. Scraper or adze, with projecting ridge (72289)           85

       74. Adze or scraper (90528)                                  85

       75. Chipped celt (87571)                                     86

       76. Chipped celt (83272)                                     86

       77. Chipped celt (113837)                                    86

       78. Hematite celt (91920)                                    87

       79. Hematite celt (113925)                                   87

       80. Hematite celt (87843)                                    87

       81. Hematite celt (90733)                                    87

       82. Handled pestle, with expanding base (90876)              88

       83. Pestle, long cylindrical form (115416)                   89

       84. Pestle, conical (114254)                                 89

       85. Pestle (65452)                                           90

       86. Pestle (71428)                                           90

       87. Pestle, grooved for handle (72276)                       90

       88. Pestle (131524)                                          90

       89. Cupped stone or paint cup (82509)                        93

       90. Muller, showing polished surface (116134)                93

       91. Muller, showing polished surface (132119)                94

       92. Hammerstone (114344)                                     95

       93. Grooved round stone (72277)                              95

       94. Grooved hammer (107300)                                  96

       95. Discoidal stone (115414)                                100

       96. Discoidal stone, with perforation (88137)               101

       97. Discoidal stone, with perforation (30234)               101

       98. Discoidal stone, with secondary depression (82619)      102

       99. Discoidal stone, in form of a ring (62708)              102

       100. Discoidal stone (90497)                                103

       101. Discoidal stone (114330)                               103

       102. Discoidal stone, convex (83142)                        104

       103. Discoidal stone (91805)                                105

       104. Discoidal stone (82953)                                106

       105. Discoidal stone, with V-shaped edges (116198)          108

       106. Discoidal stone, used as mortar (131566)               108

       107. Discoidal stone, probably used as hammer (97763)       108

       108. Discoidal pottery fragment (115873)                    109

       109. Spud (115544)                                          110

       110. Spud (115925)                                          110

       111. Spud (88130)                                           111

       112. Plummet, grooved near one end (82490)                  111

       113. Plummet, double-grooved (90746)                        111

       114. Plummet, grooved near middle (114349)                  112

       115. Plummet, grooved lengthwise (65318)                    112

       116. Plummet, grooveless, perforated (65319)                112

       117. Plummet, double cone in shape (132140)                 112

       118. Plummet (131923)                                       112

       119. Plummet (90850)                                        113

       120. Plummet, end ground flat (98659)                       113

       121. Plummet (116072)                                       113

       122. Plummet, cylindrical (71445)                           113

       123. Cone (116339)                                          113

       124. Cone (72305)                                           113

       125. Cone (71501)                                           114

       126. Cone (91944)                                           114

       127. Hemispheres                                            114

       128. Hemisphere (90729)                                     115

       129. Paint stone (90731)                                    115

       130. Gorget (88014)                                         118

       131. Gorget (?)      (Tho. 7834)                            118

       132. Gorget, reel-shape (113721)                            119

       133. Gorget (90649)                                         119

       134. Gorget (72125)                                         120

       135. Gorget, boat shape (114354)                            121

       136. Gorget, resembling boat-shape stone (107323)           121

       137. Banner stone (90657)                                   121

       138. Banner stone (115685)                                  121

       139. Banner stone, reel-shape (63186)                       122

       140. Banner stone, with horn-like projections (113782)      122

       141. Banner stone, crescent-shape (88586)                   122

       142. Banner stone, crescent-shape (115871)                  122

       143. Banner stone, crescent-shape (115900)                  123

       144. Butterfly banner stone                                 123

       145. Butterfly banner stone (90831)                         123

       146. Banner stone (90714)                                   123

       147. Boat-shape stone (87665)                               124

       148. Boat-shape stone (72347)                               124

       149. Pendant (116008)                                       125

       150. Pick (113742)                                          125

       151. Spool-shape ornament (38128)                           125

       152. Bird-shape stone (88351)                               126

       153. Shaft rubber                                           127

       154. Tube, one end flattened (90713)                        128

       155. Tube, conical (88022)                                  128

       156. Tube, hour-glass form (62869)                          129

       157. Tube, cylindrical (88588)                              129

       158. Pipe, flat base (90840)                                129

       159. Pipe (116048)                                          130

       160. Pipe (82390)                                           130

       161. Pipe, ornamented (72134)                               130

       162. Pipe (115452)                                          130

       163. Pipe, long-stemmed (82832)                             131

       164. Pipe, short-stemmed (115546)                           131

       165. Pipe (114168)                                          131

       166. Pipe (114310)                                          131

       167. Pipe (62808)                                           132

       168. Pipe (116024)                                          132

       169. Chipped spade with pointed ends (82661)                134

       170. Chipped spade with rounded ends (88155)                134

       171. Chipped spade, ovoid (71695)                           136

       172. Chipped spade (65683)                                  137

       173. Chipped spade, showing handle notches (90925)          138

       174. Chipped spade (88428)                                  138

       175. Chipped disk, or “turtleback” (15335)                  138

       176. Diagram, explaining terms                              143

       177. Triangular chipped flint (87556_a_)                    144

       178. Chipped flint (90672)                                  144

       179. Chipped flint (116058)                                 145

       180. Chipped flint, somewhat bell-shape (82883)             145

       181. Chipped flint, elliptical outline (71562_a_)           145

       182. Chipped flint, leaf-shape or oval outline (88353)      145

       183. Chipped flint (132186)                                 146

       184. Chipped flint, large, pointed elliptical outline
              (88122)                                              146

       185. Chipped flint, large, long, sharp point (113767)       146

       186. Chipped flint, large (114486)                          147

       187. Chipped flint (91921_a_)                               147

       188. Chipped flint (114277)                                 147

       189. Chipped flint, with shoulders (115419)                 147

       190. Chipped flint, small (62883)                           148

       191. Chipped flint, triangular (91754_a_)                   148

       192. Chipped flint, asymmetric (115404)                     148

       193. Chipped flint, concave edges (82832)                   148

       194. Chipped flint, triangular (88072)                      148

       195. Chipped flint, small (131633)                          149

       196. Chipped flint, short, convex edges (114539)            149

       197. Chipped flint, triangular (83235)                      149

       198. Chipped flint, concave edges (65811)                   149

       199. Chipped flint, convex base (114405)                    149

       200. Chipped flint, edges concave (91921_b_)                150

       201. Chipped flint, pentagonal (115634)                     150

       202. Chipped flint, narrow and thick (115665)               150

       203. Chipped flint, stemmed, barbless (87555)               151

       204. Chipped flint, stemmed, barbless (97754)               151

       205. Chipped flint, expanding shoulder (132212)             152

       206. Chipped flint, double-curved edges (83409_a_)          152

       207. Chipped flint, double-curved edges (113605_a_)         152

       208. Chipped flint, convex edges, long, tapering stem
              (72123)                                              152

       209. Chipped flint, with long, tapering stem (82718)        153

       210. Stemmed chipped flint, diamond or lozenge shape
              (91859_a_)                                           153

       211. Stemmed chipped flint (65803)                          153

       212. Stemmed chipped flint (115405)                         154

       213. Stemmed chipped flint, ovoid (71562_b_)                154

       214. Stemmed chipped flint, short blade (90750)             154

       215. Stemmed chipped flint, symmetric outline (113821)      155

       216. Stemmed chipped flint (113726)                         155

       217. Chipped flint, with very long, slender stem (87847)    156

       218. Stemmed chipped flint, with but one barb or shoulder
              (91731)                                              156

       219. Stemmed chipped flint, short (90673)                   156

       220. Stemmed chipped flint (87664)                          156

       221. Stemmed chipped flint, roughly made (65817)            157

       222. Stemmed chipped flint (65786)                          157

       223. Stemmed chipped flint (90739_a_)                       157

       224. Stemmed chipped flint, edges convex (88323)            157

       225. Stemmed chipped flint, with long barbs (83409_b_)      158

       226. Stemmed chipped flint (131775)                         158

       227. Stemmed chipped flint (71562_c_)                       159

       228. Stemmed chipped flint, broad point (71562_d_)          159

       229. Stemmed chipped flint, slender point (87837)           159

       230. Stemmed chipped flint (90760)                          159

       231. Stemmed chipped flint (114558)                         160

       232. Stemmed chipped flint, thin (91921_d_)                 160

       233. Stemmed chipped flint (116059)                         160

       234. Stemmed chipped flint (113741)                         160

       235. Stemmed chipped flint (114340)                         160

       236. Stemmed chipped flint, slender, with small stem
              (116047)                                             161

       237. Stemmed chipped flint, oval outline, notched (97547)   161

       238. Stemmed chipped flint (65614)                          162

       239. Stemmed chipped flint, notched, very wide stem
              (113894)                                             162

       240. Stemmed chipped flint, notched, very wide stem
              (90739_b_)                                           162

       241. Stemmed chipped flint (82686)                          163

       242. Stemmed chipped flint, projecting shoulders
              (91754_b_)                                           163

       243. Stemmed chipped flint (91921_c_)                       163

       244. Stemmed chipped flint, very rough (91136)              164

       245. Perforator, not stemmed (87556_b_)                     165

       246. Perforator, not stemmed, double pointed (90843)        165

       247. Perforator, not stemmed, double pointed (90759)        166

       248. Perforator, not stemmed, rough base (91924)            166

       249. Perforator, not stemmed, expanding base (87951)        166

       250. Perforator, not stemmed, expanding base (88019)        166

       251. Perforator, stemmed (113605_b_)                        167

       252. Perforator, stemmed, very wide shoulders (91754_c_)    167

       253. Perforator, stemmed                                    167

       254. Perforator, stemmed (83409_c_)                         167

       255. Perforator, stemmed, with cutting point (132226)       168

       256. Blunt arrowhead, or “bunt” (132204)                    168

       257. Stemmed scraper (132190)                               169

       258. Stemmed scraper (71560)                                169

       259. Stemless scraper, celt form (131749)                   170

       260. Stemless scraper, flake (90822)                        170

       261. Cores (97526)                                          171

       262. Core (97520)                                           171

       263. Flake, chipped for scraper (91968)                     173

       264. Flake, chipped for knife or arrowhead (97537)          174

       265. Flake, slender, probably for lancet (88018)            174

       266. Stemmed chipped flint (132176)                         174

       267. Stemmed chipped flint, winged (132213)                 175

       268. Stemmed chipped flint (132174)                         175

       269. Stemmed chipped flint, barbed                          175

       270. Stemmed chipped flint, broad (132235_b_)               175

       271. Stemmed chipped flint                                  176

       272. Stemmed chipped flint, slender (132208)                176

       273. Stemmed chipped flint                                  176

       274. Stemmed chipped flint, triangular                      176

       275. Stemmed chipped flint (132235_a_)                      176

       276. Chipped flint, with sharp-edged stem (63150)           177

       277. Stemmed chipped flint, point blunted from use          177

       278. Stemmed chipped flint                                  177




STONE ART

By GERARD FOWKE




INTRODUCTION.


BASIS FOR THE WORK.

The collection of the Bureau of Ethnology includes almost every type of
stone implement or ornament, and as the investigations and explorations
of the collaborators have extended over nearly all the eastern and
central portions of the Mississippi valley, it furnishes a substantial
basis for showing the geographic distribution of various forms of
objects in use among the aboriginal inhabitants.

It has not been deemed advisable to utilize material contained in other
collections. Should this be done there would be no reason for drawing
upon one rather than another, and if it were once begun the examination
would finally extend to every collection made from American localities,
a study which, although perhaps desirable, would transcend the scope of
the Bureau plans.

Much that has been published in regard to the distribution of relics in
various portions of the country is of little value to a paper of this
kind, since few of the objects are sufficiently illustrated or referred
to any class in other than the most general terms; so that it is
frequently impossible to determine the group in which a given article
should be placed. Partly for this reason, partly because the primary
purpose is description of a certain collection made in a definite way,
little space is given to the descriptive work of predecessors in the
field of archeology. The general results of previous work are, however,
carefully weighed in the conclusions reached.


CLASSIFICATION OF OBJECTS AND MATERIALS.

The ordinary division into chipped and pecked or ground implements has
been adopted: the former including all such as are more easily worked
by flaking, and the latter including those made from stone suitable
for working down by pecking into form with stone hammers or by similar
means. The system of nomenclature in general use has been retained,
as it is now familiar to students of North American archeology, and,
while not entirely satisfactory in some respects, is perhaps as good as
can be devised in the present state of knowledge.

Careful study of the entire collection has failed to show the slightest
difference in the form, finish, or material of implements from the same
locality, whether found in mounds or graves or on the surface; hence no
attempt is made to separate the two classes of objects. Allowance is to
be made for the weathering of a surface specimen, but this is the only
distinction.

It is not always easy to identify a stone, even with a fresh surface;
in a weathered specimen it is often impossible. For this reason the
material of which a specimen is made may not be correctly named;
frequently the alteration due to exposure will change the appearance of
a rock very much, and in such a case the best that can be done is to
tell what it looks most like. The material of a majority of specimens
however, or at least the classes of rock to which they belong, as
granite, porphyry, etc., are correctly named; to give a more exact name
would be possible only by the destruction or injury of the specimen.
There are a few terms used which may be here explained.

“Compact quartzite” is a very hard, close-grained, siliceous rock,
sometimes nearly a flint, and again closely approaching novaculite.
“Greenstone” may be diorite or diabase, or it may be a very compact
dark sandstone or quartzite so weathered that its nature can not be
determined from superficial observation. “Argillite” refers to any
slaty rock; it may be so soft as to be easily cut with a knife, or
nearly as hard as quartzite. Usually it is greenish in color.

A comprehensive study of all available collections will no doubt modify
materially the classification and system of types here presented.

The quotations from eminent anthropologists given below show the
difficulties in the way of establishing a satisfactory system of types,
or of assigning certain forms to particular localities. In most of
these quotations the substance only of the author’s remarks is given.

According to Dr. E. B. Tylor, the flint arrows of the Dakota, the
Apache, or the Comanche might easily be mistaken for the weapons dug
up on the banks of the Thames;[1] while cores of flint in Scandinavia
and of obsidian in Mexico are exactly alike,[2] and a tray filled with
European arrowheads can not be distinguished from a tray of American
ones.[3] Prof. Otis T. Mason observes that the great variety of form in
such weapons after they are finished is due partly to nature and partly
to the workman’s desire to produce a certain kind of implement. All
sorts of pebbles lie at the hand of the savage mechanic, none of them
just what he wants. He selects the best.[4] Perhaps the truth about the
shape is that the savage found it thus and let it so remain.[5]

The state of things among the lower tribes which presents itself to the
student is a substantial similarity in knowledge, arts, and customs,
running through the whole world. Not that the whole culture of all
tribes is alike--far from it; but if any art or custom belonging to
a low tribe is selected at random, the likelihood is that something
substantially like it may be found in at least one place thousands
of miles off, though it frequently happens that there are large
intervening areas where it has not been observed.[6]

On the whole, it seems most probable that many of the simpler weapons,
implements, etc., have been invented independently by various savage
tribes. Though they are remarkably similar, they are at the same time
curiously different. The necessaries of life are simple and similar all
over the world. The materials with which men have to deal are also very
much alike; wood, bone, and to a certain extent stone, have everywhere
the same properties. The obsidian flakes of the Aztecs resemble the
flint flakes of our ancestors, not so much because the ancient Briton
resembled the Aztec, as because the fracture of flint is like that
of obsidian. So also the pointed bones used as awls are necessarily
similar all over the world. Similarity exists, in fact, rather in
the raw material than in the manufactured article, and some even of
the simplest implements of stone are very different among different
races.[7]

Tylor again says:

    When, however, their full value has been given to the
    differences in the productions of the Ground Stone Age,
    there remains a residue of a most remarkable kind. In the
    first place, a very small number of classes, flakes, knives,
    scrapers, spear and arrow heads, celts, and hammers take in
    the great mass of specimens in museums; and in the second
    place, the prevailing character of these implements, whether
    modern or thousands of years old, whether found on this side
    of the world or on the other, is a marked uniformity. The
    ethnographer who has studied the stone implements of Europe,
    Asia, North or South America, or Polynesia, may consider the
    specimens from the district he has studied as types from which
    those of other districts differ, as a class, by the presence
    or absence of a few peculiar instruments, and individually in
    more or less important details of shape or finish, unless, as
    sometimes happens, they do not differ perceptibly at all. So
    great is this uniformity in the stone implements of different
    places and times, that it goes far to neutralize their value
    as distinctive of different races. It is clear that no great
    help in tracing the minute history of the growth and migration
    of tribes is to be got from an arrowhead which might have
    come from Polynesia, or Siberia, or the Isle of Man, or from
    a celt which might be, for all its appearance shows, Mexican,
    Irish, or Tahitian. If an observer, tolerably acquainted with
    stone implements, had an unticketed collection placed before
    him, the largeness of the number of specimens which he would
    not confidently assign, by mere inspection, to their proper
    countries, would serve as a fair measure of their general
    uniformity. Even when aided by mineralogical knowledge, often
    a great help, he would have to leave a large fraction of the
    whole in an unclassified heap, confessing that he did not know
    within thousands of miles or thousands of years where and when
    they were made.

    How, then, is this remarkable uniformity to be explained?
    The principle that man does the same thing under the same
    circumstances will account for much, but it is very doubtful
    whether it can be stretched far enough to account for even
    the greater proportion of the facts in question. The other
    side of the argument is, of course, that resemblance is due to
    connection, and the truth is made up of the two, though in what
    proportion we do not know.[8]

While the several authors quoted do not fully agree, and some are
even slightly self-contradictory, still, if the statements are to be
taken at their face value, it would seem that efforts to make such
classifications are mainly a waste of time.

It may be premised that in every class of implements there are almost
as many forms as specimens, if every variation in size or pattern is to
be considered; and these merge into one another imperceptibly. Not only
is this the case with individual types, but the classes themselves,
totally unlike as their more pronounced forms may be, gradually
approach one another until there is found a medium type whose place can
not be definitely fixed.


THE ARTS AND THEIR DISTRIBUTION.

DISTRICTS.

As space would be needlessly occupied by attempting to name each
county, the area from which specimens have been obtained is, for
convenience, divided into districts. These divisions are for use in
this article only, and are not intended as archeologic districts.

In the tables given under each heading, the names of counties or
districts show where the types described are obtained; the columns
following show the number of specimens of each material mentioned in
the collection of the Bureau.

Where a limited area only has been examined in any division, the name
of the county is usually given; but where specimens of any kind have
been obtained from different counties near one another, they are
assigned to the district including those counties. The districts are as
follows:

_Arkansas._

    Northeastern: Between White and Mississippi rivers.

    Southeastern: Between White and Washita rivers from Clarendon
    to Arkadelphia.

    Southwestern: West of Washita river and south of Arkadelphia,
    including Bowie and Red River counties, Texas.

    Central: From Dardanelles southward and eastward to the above
    limits.

_Alabama._

    Northeastern: Bordering Tennessee river east of Decatur.

    Northwestern: Bordering Tennessee river west of Decatur.
    Coosa: Bordering Coosa river southward to and including Dallas
    county.

    Tuscaloosa: Bordering the Tuscaloosa and Little Tombigbee, and
    extending a short distance below their confluence.

_Ohio._

    Miami valley: The country along the two Miami rivers, including
    Shelby county on the north and Madison and Brown counties on
    the east.

    Scioto valley: South of Franklin county, including Adams and
    Lawrence counties.

    Central: Including Union, Knox, Perry, and Franklin counties,
    and the area within these limits.

_Wisconsin._

    Southwestern: The counties bordering on either side of
    Mississippi river from La Crosse to Dubuque (Iowa).

    Eastern: The portion between Lake Michigan, Lake Winnebago, and
    the Illinois line.

    Southern: Dane and adjoining counties.

_Iowa._

    Keokuk: The southeastern corner of the state and adjacent
    portions of Illinois and Missouri.

_Tennessee._

    Eastern: All the mountain district, with the extreme
    southwestern part of Virginia.

    Western: From Mississippi river to and including the tier of
    counties east of the Tennessee.

    Northern: The northern half of the interior portion.

    Southern: The southern half of this portion.

_South Carolina._

    Northwestern: North and west of a line from Lancaster to
    Columbia. As no other portion of the state has been examined
    under direction of the Bureau, only the name of the state is
    used herein, reference being always to this section.

_Georgia._

    Northwestern: The portion northwest of the Chattahoochee.

    Southwestern: Area contiguous to the lower Chattahoochee and
    Flint river.

    Savannah: The vicinity of the city of Savannah, where a large
    collection was gathered.

_Kentucky._

    Northeastern: Between Kentucky, Big Sandy, and Ohio rivers.

    Southeastern: From Estill and Cumberland counties to the
    Tennessee and Virginia state lines.

    Central: Between Green and Ohio rivers, west of the last
    described districts.

    Southern: From Green river southward and as far westward as
    Christian county.

    Western: West of Green river and Christian county.

_North Carolina._

    Western: West of Charlotte.

    Central: Between Charlotte and Raleigh.

_Illinois._

    Southwestern: From the mouth of the Cumberland to Washington
    county, and thence to the Mississippi.


DESCRIPTIVE TERMS.

The various forms of implements will now be considered. As stated
above, the names given the various articles are those by which they are
usually known; but it may be well to define some of the terms used.

In the grooved axes, _edge_ refers to the cutting portion; _blade_, to
the part below the groove; _poll_ or _head_, to that above the groove;
_face_, to the wider or flat portion of the surface; _side_, to the
narrower part; _front_, to that side farther from the hand, and _back_,
to the side nearer the hand when in use.

In celts, the terms are the same, so far as they are applicable;
_blade_ referring to the lower half of the implement; that is, to the
portion on which the cutting edge is formed.


GROUND AND PECKED ARTICLES.

GROOVED AXES.

The implements known as grooved axes seem to be of general distribution
throughout the United States; being, so far can be learned from various
writers, much more numerous east of Mississippi river than west of it.
It must be remembered, however, that thousands of diligent collectors
have carefully searched for such things in the east, while in the west
little attention has been paid to them; consequently, deductions are
not to be made concerning their relative abundance or scarcity, until
further knowledge is gained. The same remark will apply to every form
of aboriginal relic.

In the eastern and interior states, the grooved axes are far more
abundant than the celts of the same size[9], because as a rule only the
larger implements of this class are grooved. All the ordinary varieties
of axes and hatchets are found about Lake Champlain, by far the most
abundant being celts, or grooveless axes.[10]

According to Adair and other early observers, the southern Indians had
axes of stone, around the grooved heads of which they twisted hickory
withes to serve as handles; with these they deadened timber by girdling
or cutting through the bark.[11] According to travelers of a later
generation among the western Indians, similar implements were used on
the plains to chop up the vertebræ of buffaloes, which were boiled to
obtain the marrow.[12]

These statements, which might be multiplied, show that such objects
are to be found widely scattered; none, however, give information more
definite than that the axes are “grooved,” no reference being made to
the shape of the ax or the manner of grooving.

The various modes of mounting axes and celts in handles are illustrated
in the Smithsonian Report for 1879.

Stone axes were used in Europe by the Germans at as late a period
as the Thirty Years’ war, and are supposed to have been used by the
Anglo-Saxons at the battle of Hastings.[13]

[Illustration: FIG. 29.--Grooved ax, showing groove projections.]

Axes having two grooves occur in considerable numbers in the pueblos
of southwestern United States, but they are extremely rare elsewhere
and unknown in most districts; as the objects are generally small, the
utility of the second groove is not evident.

The arrangement of stone axes may be based upon the manner of forming
the groove. In one class are placed those which in the process of
making had a ridge left encircling the weapon, in which the groove was
formed. This gives the ax greater strength with the same material.
Usually the groove has been worked just deep enough to reach the body
of the ax; that is, to such a depth that should the projections be
ground off there would remain a celt-like implement (as shown in
figure 29, of chlorite-schist, from Sullivan county, Tennessee). The
axes of this class in the Bureau collection are shown in the following
table:

  --------------------------+-----+-----+-----+-----+-----+----------
       District.            |  A  |  B  |  C  |  D  |  E  |   F
  --------------------------+-----+-----+-----+-----+-----+----------
  Eastern Tennessee         |  9  |  8  |  4  |  5  |     |   1
  Western North Carolina    |  1  |  1  |     |     |     |
  Central North Carolina    |     |     |  1  |  1  |     |
  Savannah, Georgia         |     |  4  |     |  1  |     |
  Butler county, Ohio       |     |     |     |  1  |  1  |
  --------------------------+-----+-----+-----+-----+-----+----------

  KEY:
  A = Greenstone.
  B = Argillite.
  C = Sienite.
  D = Granite.
  E = Schist.
  F = Quartzite.

In the second class the groove is formed by pecking into the body
of the ax after the latter is dressed into shape; in this pattern a
regular continuous line from edge to poll would touch only the margins
of the groove, leaving it beneath. An apparent medium between the
two is sometimes seen, in which there is a projection on the lower
side of the groove only; this is due, usually, to dressing the blade
down thinner after the implement was originally worked to a symmetric
outline. By continuous or long use the edge of the ax becomes broken
or blunted and requires sharpening, and in order to keep the proper
outline to make the tool efficient, it is necessary to work the blade
thinner as it becomes shorter. No such change is required in the poll,
consequently a projection is formed where originally there was no trace
of one.

[Illustration: FIG. 30.--Grooved ax, showing pointed edge.]

There are different methods of finishing the ax, which may appear
with either form of groove. The poll may be worked into the shape of
a flattened hemisphere, may be flat on top, with the part between the
groove and the top straight, convex or concave, or may be worked to a
blunt point, with straight or concave lines to the groove. The blade
may taper from the groove to the edge, with straight or curved sides,
which may run almost parallel or may be drawn to a blunt-pointed edge.
This latter form is probably due to breaking or wearing of the blade,
which is reworked, as shown in figure 30, of granite, from Boone
county, Missouri.

There are a very few specimens, as noted below, in which the ax
gradually increases in width from the poll to the edge; but such
specimens seem to be made of stones which had this form approximately
at the beginning, and were worked into such shape as would give a
suitable implement with the least labor.

In nearly every instance the groove of an ax with a groove projection
extends entirely around with practically the same depth, and the blade
of the ax has an elliptical section. There are, however, a few with the
back flattened; and while many of the second division may be similar in
section, and in having the groove extend entirely around, yet in this
class are to be placed nearly all of those only partly encircled by a
groove or showing some other section than the ellipse.

[Illustration: FIG. 31.--Grooved ax, showing groove entirely around.]

[Illustration: FIG. 32.--Grooved ax, slender, showing groove entirely
around.]

With these exceptions, the second class of grooved stone axes comprises
seven groups, which may be described and tabulated as follows:

_A._ Grooved entirely around, elliptical section, polls dressed in any
of the ways given above; three or four have the blunt-pointed edge
(figure 31, of granite, from Bradley county, Tennessee).

  +-----------------------------+---+---+---+---+---+---+---+---+---+
  |       District.             | A | B | C | D | E | F | G | H | I |
  +-----------------------------+---+---+---+---+---+---+---+---+---+
  |Southwestern Illinois        |   |   | 1 |   |   |   | 1 | 1 |   |
  |Eastern Tennessee            | 4 | 3 |   | 2 | 2 |15 | 4 | 1 |   |
  |Central North Carolina       |   | 1 |   |   |   | 1 |   |   |   |
  |Western North Carolina       |   | 2 |   |   |   | 2 |   |   |   |
  |Central Arkansas             | 1 |   |   | 1 |   |   |   |   |   |
  |Ross county, Ohio            |   | 1 |   |   |   |   |   |   |   |
  |Green River, Kentucky        |   |   | 1 |   | 1 |   |   |   |   |
  |Northeastern Kentucky        |   |   |   |   |   | 1 |   |   | 1 |
  |Kanawha valley, West Virginia|   | 4 | 1 | 1 |   |   |   | 1 |   |
  |Keokuk district, Iowa        | 1 | 1 |   |   |   |   |   |   |   |
  |Savannah, Georgia            | 1 |   |   | 2 |   | 6 |   |   | 3 |
  |Miami valley, Ohio           | 2 | 5 | 1 |   |   |   |   |   |   |
  +-----------------------------+---+---+---+---+---+---+---+---+---+

  KEY:
  A = Greenstone.
  B = Granite.
  C = Diorite.
  D = Sandstone.
  E = Quartzite.
  F = Argillite.
  G = Slate.
  H = Sienite.
  I = Porphyry.

_B._ Long, narrow, and thin, giving a much flattened elliptical
section. These are classed with axes on account of the grooves,
although too thin and usually of material too soft to endure violent
usage. The edges are nicked, striated, or polished, as though from
use as hoes or adzes (figure 32, of argillite, from Bradley county,
Tennessee).

  +---------------------------------+---+---+---+
  |     District.                   | A | B | C |
  +---------------------------------+---+---+---+
  |Eastern Tennessee                |   | 18|  1|
  |Keokuk district, Iowa            |   |  1|   |
  |Kanawha valley, West Virginia    |   |  1|   |
  |Montgomery county, North Carolina|   |  1|   |
  |Western North Carolina           |  1|   |   |
  |Butler county, Ohio              |   |   |  2|
  +---------------------------------+---+---+---+

  KEY:
  A = Granite.
  B = Argillite.
  C = Slate.


[Illustration: FIG. 33.--Grooved ax, showing grooved back.]

[Illustration: FIG. 34.--Grooved ax, showing grooved back.]

_C._ Grooved on both faces and one side; back hollowed, usually in a
straight line the whole length; front drawn in from the groove to give
a narrower edge (figures 33, of porphyry, from Brown county, Ohio, and
34, of granite, from Kanawha valley, West Virginia).

  +-----------------------------+---+---+---+---+
  |     District.               | A | B | C | D |
  +-----------------------------+---+---+---+---+
  |Eastern Tennessee            | 1 |  1|   |   |
  |Kanawha valley, West Virginia| 1 |   | 1 |   |
  |Butler county, Ohio          |   |   | 1 |   |
  |Brown county, Ohio           |   |   |   |1  |
  +-----------------------------+---+---+---+---+

  KEY:
  A = Granite.
  B = Argillite.
  C = Sienite.
  D = Porphyry.

_D._ Same method of grooving; back is rounded, and may be in a straight
or curved line the entire length, or a broken line straight in each
direction from the groove. The type is illustrated by figure 35, of
granite, from Keokuk, Iowa. This specimen is unusually wide and thin;
generally the outlines are similar to those last described.

  +-------------------------+--------+----------+--------+
  |      District.          |   A    |    B     |   C    |
  +-------------------------+--------+----------+--------+
  |Eastern Tennessee        |        |    5     |        |
  |Butler county, Ohio      |   2    |          |        |
  |Keokuk district, Iowa    |   1    |          |   1    |
  +-------------------------+--------+----------+--------+

  KEY:
  A = Granite.
  B = Argillite.
  C = Sienite.

[Illustration: FIG. 35.--Grooved ax, showing rounded back.]

_E._ Grooved like the last; same general form, except that the back
is flat (figures 36, of sienite, from Brown county, Ohio, and 37, of
granite, from Drew county, Arkansas).

  +------------------------------+---+---+---+---+---+
  |  District.                   | A | B | C | D | E |
  +------------------------------+---+---+---+---+---+
  |Miami valley, Ohio            |   | 2 | 3 |   | 5 |
  |Brown county, Ohio            |   |   |   | 1 |   |
  |Keokuk district, Ohio         |   | 1 |   | 1 |   |
  |Brown county, Illinois        |   |   | 1 | 2 |   |
  |Eastern Tennessee             |   | 2 |   |   | 2 |
  |Kanawha valley, West Virginia |   |   | 4 | 1 | 2 |
  |Savannah, Georgia             | 1 |   |   |   | 1 |
  |Northeastern Kentucky         |   |   | 1 |   |   |
  |Licking county, Ohio          |   |   | 1 |   |   |
  +------------------------------+---+---+---+---+---+

  KEY:
  A = Sandstone.
  B = Argillite.
  C = Granite.
  D = Sienite.
  E = Greenstone.

_F._ Grooved on both faces and one side, with both sides flat. There
is only one of this form in the collection; it is of argillite, from
Keokuk, Iowa.

_G._ Grooved on faces only, with both sides flat (figure 38, of
granite, from Keokuk, Iowa). There are from the same place one of
porphyry, one of argillite, and three of sienite. This and the
preceding form seem peculiar to that locality.

[Illustration: FIG. 36.--Grooved ax, showing flattened curved back.]

[Illustration: FIG. 37.--Grooved ax, showing flattened straight back.]

There are a few exceptional forms which are not placed with those just
given, since they may have some features common to all except the
Keokuk type, while in other respects they differ from all. Among them
are some entire-grooved or grooved only on the two sides and one face;
the general outline may correspond with some of the regular forms, but
one face is curved from poll to edge, while the other is straight or
nearly so (figure 39, of granite, from Wilkes county, North Carolina).
This specimen has a depression, as if worn by the end of a handle, on
the straight face at the lower edge of the groove.

None of this form are long enough for hoes, and although they may have
been used for axes and hatchets, their shape seems to indicate use as
adzes. Besides the one figured there are two from Savannah, Georgia;
three from eastern Tennessee, one with a slight groove and very deep
side notches; and three from western North Carolina, two of them
entire-grooved with groove projections.

[Illustration: FIG. 38.--Grooved ax, Keokuk type.]

[Illustration: FIG. 39.--Grooved ax, showing adze form.]

Another unusual form, which may come under any of the foregoing
figures, has the groove crossing the implement diagonally, in such a
way as to cause the blade to incline backward (figure 40, of granite,
from Carter county, Tennessee). Besides the specimen illustrated, this
form is also represented by one of granite from northwestern North
Carolina with projection for groove; two of argillite from southwestern
Tennessee; one, widest at edge, from Savannah, Georgia; one from Ross
county, Ohio; and two of granite, highly polished, grooved on faces and
one side, with backs flat, from Kanawha valley, West Virginia.

Of the axes wider at the edge than at any point above (of which
the specimen illustrated in figure 41, of granite, from a grave at
Kingsport, Tennessee, may be taken as a type,) there are one of diorite
from Kanawha valley, West Virginia, which seems to have been of
ordinary pattern but broken and redressed to its present form; and from
Savannah, Georgia, one of uniform taper with diagonal groove, and one
widening irregularly until the blade is fully twice the width of the
poll.

[Illustration: FIG. 40.--Grooved ax, showing diagonal groove.]

[Illustration: FIG. 41.--Grooved ax, showing wide edge.]

Many, if not a majority, of the entire-grooved axes have the groove
wide enough for a very large handle, or for an ordinary withe to be
twisted twice around. In those which have one side ungrooved, the
intention was to admit a wedge between the stone and the curve of
the handle. The handles were very firmly fastened; two axes in the
collection have been broken in such a way that on one side, from the
top half way down, the blade is gone, carrying away the groove on that
side; yet the polish of the groove extends over the fractured surface,
which has never been reworked, showing that the tool was long used
after this accident. As the handles could easily slip off over the top
in specimens thus broken, they must have been tightly lashed; perhaps
gum or glue was used.

[Illustration: FIG. 42.--Grooved ax, showing curved edge.]

Partly finished specimens show that the groove was pecked out and the
edge ground before the remaining parts of the ax were worked. Some
have the edge ground sharp and the groove worn smooth or even polished
by long use, while all the rest of the implement retains the original
weathered surface. A stone was always chosen that could be brought to
the desired form with the least labor, and very often one could be
found that required but little work to make a very satisfactory weapon
or implement or even ornament.

Occasionally specimens indicate by the manner of wear their application
to certain kinds of work. Sometimes the edge is curved by the wearing
away of one face until it has almost a gouge form; sometimes the side
of the blade next the hand, again that farthest away, is more worn.
This in time would give the blunt-pointed edge. A peculiar finish of
the lower part of the blade, which is also seen in a few celts, is
shown in figure 42, of sienite, from Carter county, Tennessee. One
half of each face has been left full, and the part opposite hollowed
out, giving an ogee curve to the edge. Figure 43, of granite, from
Jefferson county, Tennessee, seems to have a ridge on the upper side
of the groove; but closer examination shows that it once had a groove
projection, and that afterwards the poll was nearly all broken away and
a new groove made lower down, so that what was originally the lower
projection is now above the groove, the remainder of the poll being
worked down to a point.

There are a few hammers which differ from the ordinary ax only in being
blunt instead of sharp. They may be nothing more than broken axes,
utilized as hammers instead of being resharpened.

[Illustration: FIG. 43.--Grooved ax, showing single groove projection.]

Under this head may be placed implements plainly used as adzes. They
are much longer than axes in proportion to their other dimensions, have
one face convex, the other straight or concave. They may be placed
in the same class as the specimen shown in figure 39, and also those
represented in figures 44 and 45, from McMinn county, Tennessee. There
is also a similar adze from Saline county, Arkansas. All the specimens
of this class are of argillite.

With the grooved axes is also placed a class of implements that may
be called axes notched on the sides. Many of them were no doubt used
as sinkers; but some of the same form, size, and material have the
notches and sometimes portions of the face worn perfectly smooth, while
frequently they are ground to a sharp edge. Again, even in those that
have not the least polish, the edge shows marks that would seem to
result from use as axes, adzes, or hoes.

There are three divisions of this class of implements, as follows:

_A._ Unworked, except notches; probably sinkers.

  +----------------------------------+---+---+---+---+
  |        District.                 | A | B | C | D |
  +----------------------------------+---+---+---+---+
  |Eastern Tennessee                 | 1 | 5 |   |   |
  |Montgomery county, North Carolina |   |   | 1 |   |
  |Northeastern Alabama              |   |   |   | 5 |
  |Kanawha valley, West Virginia     | 3 |   |   |   |
  +----------------------------------+---+---+---+---+

  KEY:
  A = Sandstone.
  B = Argillite.
  C = Quartzite.
  D = Limestone.

_B._ Partly ground sharp edges, mostly with polished notches,
sometimes with faces polished from one notch to the other (figure 46,
of argillite, from Cocke county, Tennessee). In addition there are
11 examples of argillite, besides one of mica-schist from eastern
Tennessee and another of sandstone from Savannah, Georgia.

[Illustration: FIG. 44.--Grooved adze.]

[Illustration: FIG. 45.--Grooved adze, showing curved blade.]

_C._ Roughly chipped, with notches often at the middle but sometimes
nearer one end. Probably most of these were sinkers; but as above
stated the edges show marks of use, apparently in scraping, digging, or
striking. Of these the following examples are in the Bureau collection:
From several localities in eastern Tennessee, 40 of argillite; from
Montgomery county, North Carolina, 24 of argillite and quartzite;
from Kanawha valley, West Virginia, and from Savannah, Georgia, a few
specimens of the same materials.


CELTS.

What is true of the uses and distribution of stone axes applies with
much the same force to what are called celts--not a good descriptive
term, but one which is now given to the implement in lieu of something
better. It would appear difficult or impossible to do with these rude
tools any work for which we commonly use an ax or hatchet; and yet,
by the aid of fire, or even without it, the aborigines contrived to
accomplish a great deal with them.

The Maori of New Zealand do all their wonderful work of wood carving
with only a chisel or adze (of stone or shell).[14] Among the Iroquois,
in cutting trees, fire was applied at the root, the coals were scraped
away with a chisel, and this process was repeated until the tree was
felled. The trunk was divided into lengths in the same way. Similarly
canoes and mortars were hollowed out.[15] The Virginia Indians at an
early day employed a similar process. They also cleared ground for
cultivation by deadening trees with their tomahawks,[16] and used adzes
made of shell in cleaning out the charred wood in making canoes.[17]
The Nootka of the northwestern part of the continent in felling a tree
use a flint or elkhorn set in a handle, this being struck with a stone
mallet. In hollowing canoes a musselshell also is used as an adze, and
sometimes fire is applied. The outside is shaped by similar means.[18]

[Illustration: FIG. 46.--Notched ax, showing polished edge.]

Stone chisels have been found in various steatite quarries, where
vessels and other utensils of this material were made, and the marks of
their use is plain both on the vessels in an unfinished state and on
the cores, as well as on the quarry face.[19]

The different ways of hafting, as shown by specimens in the Bureau
collection, were as follows:

(1) A hole was cut entirely through a stick and the celt was inserted
so that it would project on both sides;

(2) The hole was cut partly through, and the celt was pushed in as far
as it would go;

(3) The top of the celt was set in a socket of deer horn, which was put
into a handle as in form 2;

(4) Small celt-shaped knives or scrapers were set into the end of a
piece of antler long enough to be used as a handle;

(5) A forked branch was so cut as to make two prongs of nearly equal
length, and the celt was fastened to the end of one, parallel with it,
the other being used to guide and steady it, a prong being held in each
hand;

(6) The fork of a root or branch was trimmed so as to make a flat face
at any desired angle, to which the celt was lashed, a shoulder, against
which the end of the celt was set, being sometimes cut in the wood;

(7) A stick was split its entire length and a single turn taken around
the celt, the ends being brought together and tied, forming a round
handle;

(8) A stick was split part way, one fork cut off and the other wrapped
once or twice and tied, thus forming a round handle of solid wood.

[Illustration: FIG. 47.--Celt, showing blade thick near edge.]

[Illustration: FIG. 48.--Celt, showing blade thick near edge.]

Forms 5 and 6 were used as adzes; forms 7 and 8 are the same methods as
employed in hafting grooved axes.

A mounting similar to form 4 is seen in some Alaska specimens of
celt-scrapers in which the implement is fastened to a piece of wood so
as to project a short distance, and used like a plane. In all these,
the celt is very firmly fastened to the handle with sinew or rawhide,
which, when put on green, contracts with great force and binds like
wire.

As to the forms of celts, no division is practicable based on anything
but their entire appearance. The following descriptions and tabulations
represent the material of this kind in the Bureau collection:

_A._ Round or nearly round section, pointed or flattened at the top,
blade rapidly thickening from the edge; a few are polished at the top,
but most of them show marks of a maul or hammer; all have been highly
polished; all of this class were probably used as wedges, as their
shape renders them more fit for this purpose than for any other; the
battered tops indicate such usage. The few not showing such marks
may have been set into a bumper of wood or horn, or used with wooden
mauls. They vary in length from 2½ to 7½ inches. They are represented
by the specimen shown in figure 47, of argillite, from Lincoln county,
Arkansas; there are also one from a mound in Sumter county, Alabama
(figure 48), and one from Kanawha valley, West Virginia, both of
serpentine and elliptical in section, though the form of the edge puts
them in this class. The following specimens are typical representations
of the class:

  +----------------------------+---+---+---+---+---+
  |       District.            | A | B | C | D | E |
  +----------------------------+---+---+---+---+---+
  |Northwestern North Carolina | 3 | 7 | 2 |   |   |
  |Eastern Tennessee           |   | 3 |   |   |   |
  |Western Tennessee           |   |   |   | 1 |   |
  |Southeastern Arkansas       |   | 2 |   |   |   |
  |Union county, Mississippi   | 1 |   |   |   |   |
  |Madison county, Illinois    |   |   | 1 |   |   |
  |Savannah, Georgia           | 2 |   |   |   | 1 |
  +----------------------------+---+---+---+---+---+

  KEY:
  A = Sienite.
  B = Argillite.
  C = Granite.
  D = Rotten limestone.
  E = Sandstone.

[Illustration: FIG. 49.--Celt, showing long, slender form.]

_B._ Long, narrow, elliptical section, pointed top, curved or straight
edges, sides straight or gently curved. None of these seem to have
been put to any rough use, as the edges are quite sharp and the entire
surface is well polished; length from 4¼ to 12½ inches. The type is
illustrated by figure 49, of argillite, from a mound in Monroe county,
Tennessee.

  +------------------------------+---+---+---+---+---+
  |      District.               | A | B | C | D | E |
  +------------------------------+---+---+---+---+---+
  |Eastern Tennessee             | 8 | 3 |   |   |   |
  |Northwestern Georgia          |   | 1 |   |   |   |
  |Savannah, Georgia             |   |   | 6 | 1 | 3 |
  |Kanawha valley, West Virginia |   |   |   |   | 1 |
  |Northeastern Alabama          |   |   |   |   | 1 |
  |Western North Carolina        | 1 |   |   |   |   |
  +------------------------------+---+---+---+---+---+

  KEY:
  A = Argillite.
  B = Granite.
  C = Sandstone.
  D = Quartzite.
  E = Sienite.

_C._ Thick, almost round section, round-pointed top, nearly straight
to sharp-curved edge, sides gently curved, widest at edge or just
above. Most of these show marks of use as cutting tools or hatchets.
In many the top has been roughened as if for insertion into a hole
cut in a piece of wood; others have this roughening around the middle
or immediately above, leaving a polish at both ends, and these were
hafted probably by means of a stick or withe twisted around them. The
roughening is a secondary operation, having no relation to the making
of the implement; it was produced by pecking after the surface was
polished. In a few cases it extends from the top well down the sides;
but usually it reaches but a little way below the top, or else is in
a circle around the body of the celt. Most of them have sharp edges;
a few have edges either chipped or blunted and polished, showing long
usage. Two from Kanawha valley (one roughened for handle) have the
edges worn in on one of the faces until they almost resemble gouges;
but that they were not intended as such is shown by the concavity being
nearer one side and not reaching entirely across. The length ranges
from 4½ to 10 inches. The type is illustrated by figures 50 and 51,
both of sienite, from Lauderdale county, Tennessee.

[Illustration: FIG. 50.--Celt, nearly round section.]

[Illustration: FIG. 51.--Celt, nearly round section.]

This may be regarded as the typical form of celt for eastern United
States, and its geographic distribution is exceptionally wide, as shown
in the table.

The Bureau collection includes the following specimens of this class:

  ---------------------------------+---+---+---+---+---+---+---+---+
        District.                  | A | B | C | D | E | F | G | H |
  ---------------------------------+---+---+---+---+---+---+---+---+
  Western North Carolina           | 4 | 2 | 9 |16 |   |   |   |   |
  Montgomery county, North Carolina| 1 |   |   |   |   |   |   |   |
  Coosa district, Alabama          |   | 1 |   |   |   |   |   |   |
  Ross county, Ohio                |   |   | 1 |   |   |   |   |   |
  Knox county, Ohio                |   |   |   |   |   | 1 |   |   |
  Miami valley, Ohio               |   | 1 | 2 |   |   |   |   |   |
  Eastern Tennessee                |   | 5 |   | 1 |   |   |   |   |
  Green river, Kentucky            |   |   | 1 |   |   |   |   |   |
  Northeastern Kentucky            |   |   |   |   | 1 |   | 2 |   |
  Northeastern Arkansas            |   |   |   |   |   |   |   |   |
  Kanawha valley, West Virginia    |   | 4 | 4 |   |   |   | 3 | 1 |
  Crawford county, Wisconsin       |   |   | 1 |   |   |   |   |   |
  Southwestern Illinois            |   |   | 2 |   |   |   |   | 1 |
  Savannah, Georgia                |   | 3 | 2 |   |   | 2 |   |   |
  Western Tennessee                |   | 2 |   |   |   |   |   |   |
  ---------------------------------+---+---+---+---+---+---+---+---+

  KEY:
  A = Porphyry.
  B = Sienite.
  C = Granite.
  D = Argillite.
  E = Greenstone.
  F = Sandstone.
  G = Diorite.
  H = Compact quartzite.

_D._ Of the form last described, except in being much thinner; some
have the tops battered, showing use as wedges; length from 3 to 9
inches.

  ------------------------------+---+---+---+---+---+---+---+---+---+---+
        District.               | A | B | C | D | E | F | G | H | I | J |
  ------------------------------+---+---+---+---+---+---+---+---+---+---+
  Eastern Tennessee             |11 | 3 | 2 |   |   | 1 | 1 |   | 1 |   |
  Kanawha valley, West Virginia |   |   | 2 | 5 | 2 | 6 |   |   |   |   |
  Northwestern Georgia          |   |   | 3 |   |   |   |   | 1 |   |   |
  Savannah, Georgia             |   |   |   |   | 2 |   |   |   |   |   |
  Green river, Kentucky         |   |   |   |   |   | 1 |   |   |   |   |
  Northeastern Kentucky         |   |   |   |   |   | 2 |   |   |   |   |
  Southeastern Arkansas         |   |   |   |   |   |   |   | 1 |   |   |
  Central Arkansas              |   |   |   |   |   |   |   |   |   | 1 |
  Northeastern Arkansas         |   |   |   |   | 1 |   |   |   |   | 1 |
  Butler county, Ohio           |   |   |   | 2 |   |   |   |   |   |   |
  Northwestern North Carolina   | 8 | 2 | 1 |   |   | 4 |   |   |   |   |
  ------------------------------+---+---+---+---+---+---+---+---+---+---+

  KEY:
  A = Argillite.
  B = Porphyry.
  C = Sienite.
  D = Diorite.
  E = Sandstone.
  F = Granite.
  G = Hornblende.
  H = Greenstone.
  I = Serpentine.
  J = Compact quartzite.

[Illustration: FIG. 52.--Celt, showing nearly diamond section.]

_E._ Pointed oval, or nearly diamond section, sides straight or
slightly curved; length 6 to 12½ inches. Few as these are, they vary
considerably in appearance. The group is illustrated by figure 52,
showing a specimen of brown flint, containing numerous small deposits
of chalcedony, from Benton county, Tennessee; polished over the entire
surface, the edge highly so.

In addition, there are the following examples: From Caldwell county,
North Carolina, one of porphyry and one of granite, the latter
roughened on sides for handle; from McMinn county, Tennessee, one of
gray flint, highly polished over its surface, except the top, which is
much battered; from Cocke county, Tennessee, one of argillite.

_F._ Elliptical section, flattened or rounded top, edge curved or
nearly straight, sides straight or gently curved, tapering from edge to
top or in a few cases nearly parallel. These present many variations
in finish and in evidence of use. Some are well polished over the
entire surface; some have only the lower part polished; while some are
entirely without polish except at the extreme edge. In some the top
is battered; some have the surface roughened for handle at the top,
others around the middle, still others all over the upper half or even
more than half. One from McMinn county, Tennessee, has a roughly pecked
shallow groove at the middle. Several have the edge very blunt, the
faces at the edge form almost a right angle; these are thickest very
near the edge and become gradually thinner toward the top. Most of this
kind are from Caldwell county, North Carolina; the same form coming also
from Monroe county, Tennessee, and from Savannah, Georgia. The length
is from 3 to 7½ inches. Figure 53, of compact quartzite, from Monroe
county, Tennessee; figure 54, of granite; and figure 55, of sienite,
from Caldwell county, North Carolina.

[Illustration: FIG. 53.--Celt.]

[Illustration: FIG. 54.--Celt.]

[Illustration: FIG. 55.--Celt.]

  ------------------------+---+---+---+---+---+---+---+---+---+---+---+---+
        District.         | A | B | C | D | E | F | G | H | I | J | K | L |
  ------------------------+---+---+---+---+---+---+---+---+---+---+---+---+
  Eastern Tennessee       |   | 4 | 4 |20 | 7 |   | 4 | 1 | 1 |   |   |   |
  Western North Carolina  | 1 |   | 4 |22 | 4 | 3 | 5 |   |   |   |   |   |
  Montgomery county, N. C.|   |   |   |   |   |   |   | 1 |   |   |   |   |
  Coosa district, Alabama |   |   |   |   |   |   |   | 2 |   |   |   |   |
  Southwestern Illinois   |   |   | 1 |   |   |   | 7 |   |   |   |   |   |
  Kanawha valley, W. Va.  |   |   |   | 3 | 7 |   | 5 |   |10 |   | 1 | 1 |
  Keokuk, Iowa            |   |   |   |   |   |   | 1 |   |   |   |   |   |
  Southwestern Wisconsin  |   |   |   |   |   | 1 | 1 |   |   |   |   |   |
  Miami valley, Ohio      |   |   |   |   |   | 2 | 3 |   |   |   |   |   |
  Northeastern Arkansas   | 1 |   |   | 1 |   |   | 2 |   |   | 2 |   |   |
  Southeastern Arkansas   |   |   |   |   |   |   |   |   |   |   | 1 |   |
  Northwestern Georgia    |   |   |   | 1 | 2 |   |   |   |   |   |   |   |
  Savannah, Georgia       |   | 2 |   |   | 2 |   | 1 |   |   |   | 7 |   |
  Yazoo county,           |   |   |   |   |   |   |   |   |   |   |   |   |
   Mississippi            |   |   |   |   | 5 |   | 2 |   |   |   |   |   |
  ------------------------+---+---+---+---+---+---+---+---+---+---+---+---+

  KEY:
  A = Hornblende.
  B = Serpentine.
  C = Compact quartzite.
  D = Argillite.
  E = Sienite.
  F = Porphyry.
  G = Granite.
  H = Micaceous sandstone.
  I = Diorite.
  J = Greenstone.
  K = Sandstone.
  L = Flint.

_G._ Of the same general pattern as the last, except that the sides
widen just before reaching the edge, giving a “bell shape” (figure
56). The length is from 6¼ to 8 inches. In this group there are two
specimens of granite, two of porphyry, and one of sienite, all from
Yazoo county, Mississippi. Two have their tops roughened.

[Illustration: FIG. 56.--Celt, showing “bell shape” and roughening for
handle.]

[Illustration: FIG. 57.--Celt, showing rectangular section.]

_H._ Rectangular section, occasionally with the corners sufficiently
rounded to give a somewhat elliptical section; top flattened or
rounded; sides straight and parallel or nearly so, sometimes very
slightly curved. Most have polished surfaces; only three or four show
any battering, or roughening for handle. A large one of hornblende from
Lauderdale county, Tennessee, has the edge dulled and polished by use.
Length is from 2 to 9 inches. Figure 57, of argillite, from a mound in
Monroe county, Tennessee. The distribution of this class of celts is
wide, as shown by the following table:

  +----------------------------+---+---+---+---+---+---+---+---+---+---+
  |     District.              | A | B | C | D | E | F | G | H | I | J |
  +----------------------------+---+---+---+---+---+---+---+---+---+---+
  |Eastern Tennessee           | 10| 10|  2|  1|   |   |   |   |  1|   |
  |Western Tennessee           |   |   |   |   |   |   |  1|   |   |   |
  |Northeastern Kentucky       |   |   |  1|  1|  1|   |  1|  1|   |   |
  |Green River, Kentucky       |   |   |   |   |  1|   |   |   |   |   |
  |Southwestern Illinois       |   |   |   |  2|  1|   |   |   |   |   |
  |Miami valley, Ohio          |   |   |   |  2|  2|  1|  1|   |   |   |
  |Kanawha valley, W. V.       |  1|   |   |  8|  4|  4|  1|   |   |   |
  |Northwestern Georgia        |   |   |   |   |   |   |   |   |   |  1|
  |Savannah, Georgia           |   |   |   |   |   |   |   |   |  1|   |
  |Central Arkansas            |   |   |   |   |   |   |   |   |  1|   |
  |Northwestern North Carolina |   |   |   |   |   |   |   |   |   |  1|
  +----------------------------+---+---+---+---+---+---+---+---+---+---+

  KEY:
  A = Sandstone.
  B = Argillite.
  C = Porphyry.
  D = Granite.
  E = Sienite.
  F = Diorite.
  G = Hornblende.
  H = Limestone.
  I = Jasper.
  J = Serpentine.

_I._ Thickest at top (wedge form), section elliptical or nearly
rectangular; sides straight or curved, widest at edge or nearly
parallel. A few are roughened for handling, and one or two are battered
at top by hammering; most are small. The type is shown in figure 58,
of granite, from Carroll county, Indiana. This class of celts also is
widely distributed and diverse in material.

  +------------------------------+---+---+---+---+---+---+---+---+---+---+
  |     District.                | A | B | C | D | E | F | G | H | I | J |
  +------------------------------+---+---+---+---+---+---+---+---+---+---+
  |Eastern Tennessee             |   |  3|  4|   |  1|   |   |   |   |   |
  |Northeastern Arkansas         |  1|   |   |   |   |  1|   |   |   |   |
  |Southeastern Arkansas         |   |  1|   |  1|   |   |   |   |   |   |
  |Butler county, Ohio           |   |   |   |  1|   |   |   |   |   |   |
  |Green river, Kentucky         |   |   |  1|   |   |   |   |   |   |   |
  |Northeastern Kentucky         |   |  3|   |   |   |   |   |  1|  1|   |
  |Crawford county, Wis.         |   |   |   |   |   |   |   |   |  1|   |
  |Southwestern Illinois         |   |  3|  1|   |   |   |   |   |   |   |
  |Savannah, Georgia             |   |   |   |   |   |   |  2|   |   |   |
  |Kanawha valley, West Virginia |  1|  7|  5|   |   |  1|   |  5|  2|   |
  +------------------------------+---+---+---+---+---+---+---+---+---+---+

  KEY:
  A = Hornblende.
  B = Granite.
  C = Sienite.
  D = Comp. quartzite.
  E = Argillite.
  F = Greenstone.
  G = Sandstone.
  H = Diorite.
  I = Porphyry.
  J = Basalt.

[Illustration: FIG. 58.--Celt, showing wedge-shape.]

[Illustration: FIG. 59.--Celt, showing half-elliptical section.]

_J._ Flat on one side, convex on the other, giving a semi-elliptical
section; sides nearly parallel; top flat or rounded. These were
evidently intended for scrapers; none are at all chipped or battered
from use, and with very few exceptions the whole surface is highly
polished. The flint and jasper specimens, which have been first chipped
into shape, have the facets and edge as smooth as though finished on
an emery wheel. Similar forms, except with flat instead of convex
upper surfaces, are known to have been used as adzes, but these have no
marks of such use. The length ranges from 2 to 8 inches, but most are
small. The type is shown in figure 59, of brown flint, from a grave in
Alexander county, Illinois.

  +-----------------------------+---+---+---+---+---+---+---+---+
  |     District.               | A | B | C | D | E | F | G | H |
  +-----------------------------+---+---+---+---+---+---+---+---+
  |Eastern Tennessee            |   | 4 | 1 | 1 |   |   |   |   |
  |Central Arkansas             |   |   |   | 1 |   |   |   |   |
  |Northeastern Arkansas        |   |   |   |   | 4 | 1 |   |   |
  |Southeastern Arkansas        |   |   |   |   |   |   | 1 |   |
  |Southwestern Illinois        | 1 |   |   |   |   |   |   |   |
  |Butler county, Ohio          |   |   |   | 1 |   |   |   |   |
  |Northeastern Kentucky        | 2 |   |   |   |   |   |   |   |
  |Tuscaloosa district, Alabama |   |   |   | 1 |   |   |   |   |
  |Northwestern North Carolina  | 1 |  2|   |   |   |   |   | 1 |
  +-----------------------------+---+---+---+---+---+---+---+---+

  KEY:
  A = Graphite.
  B = Argillite.
  C = Porphyry.
  D = Compt. quartzite.
  E = Yellow jasper.
  F = Gray jasper.
  G = Novaculite.
  H = Sienite.

_K._ Similar to last, except that the sides come to a point at the top;
length, 3½ to 9 inches. Very few of either pattern are above 5 inches
long, the larger ones being mostly of flint (figure 60, of sienite,
from Warren county, Ohio).

  +-----------------------------+---+---+---+---+---+---+
  |     District.               | A | B | C | D | E | F |
  +-----------------------------+---+---+---+---+---+---+
  |Northeastern Arkansas        | 2 |   |   |   |   |   |
  |Western Tennessee            |   | 1 |   |   |   |   |
  |Eastern Tennessee            | 1 |   |   | 2 | 5 |   |
  |Kanawha valley, West Virginia|   |   | 1 |   |   |   |
  |Southwestern Illinois        |   |   |   | 2 |   | 1 |
  |Warren county, Ohio          |   | 2 |   |   |   |   |
  +-----------------------------+---+---+---+---+---+---+

  KEY:
  A = Yellow jasper.
  B = Sienite.
  C = Diorite.
  D = Gray jasper.
  E = Argillite.
  F = Compt. quartzite.

_L._ Sides concave, top narrow. Nearly every specimen has the upper
portion pecked rough; one from Bradley county, Tennessee, and another
from Mississippi county, Arkansas, are entirely polished. The latter
has the scraper-form edge to be described later and is of exceptionally
large size; it measures 5½ inches, being the only one exceeding 5
inches in length.

_M._ Top flat, round, or pointed; the blade usually begins a little
below the middle, and is perfectly smooth in every case; in some the
blade is not over an inch in length, probably reduced by continual
sharpening. They may have been scrapers, though they do not have that
form; if used as weapons they were probably set into the end of a
piece of antler, which, in turn, was set in a club. The type is shown
in figure 61, of argillite, from Monroe county, Tennessee.

  +------------------------------+---+---+---+---+---+
  |     District.                | A | B | C | D | E |
  +------------------------------+---+---+---+---+---+
  |Eastern Tennessee             |  7|  1|  2|   |   |
  |Kanawha valley, West Virginia |   |  1|  1|   |   |
  |Northeastern Arkansas         |   |  1|   |  1|   |
  |Southeastern Arkansas         |   |   |   |   |  1|
  |Southwestern Illinois         |  1|   |  2|   |   |
  +------------------------------+---+---+---+---+---+

  KEY:
  A = Argillite.
  B = Sienite.
  C = Granite.
  D = Quartzite.
  E = Hornblende.KEY

[Illustration: FIG. 60.--Celt showing half-elliptical section.]

[Illustration: FIG. 61.--Celt, showing concave sides.]

_N._ Ground down thin, with a flat-elliptical or nearly rectangular
section; sides straight or slightly curved, nearly parallel or tapering
considerably to the top, which is either rounded or flattened. All
are polished over the entire surface; none show any marks of use as
wedges or hatchets, and most of them are too delicate for such use. The
longer ones can be readily grasped in the hand, and are as well adapted
to stripping off the hide of an animal, dividing the skeleton at the
joints, or stripping the flesh from the bones, as anything made of
stone can be; while the smaller ones, set in a handle to afford a grip,
would answer the same purpose. There are three which are sharp at both
ends, one having one symmetrical and one scraper-form edge; one having
a scraper-form edge at each end on opposite sides; and one of rather
soft argillite, unfinished, which has marks of pecking, chipping, and
grinding, showing that any of these methods were practiced, as was
most convenient. All these are from eastern Tennessee. The features
are illustrated in figures 62, of argillite, from a mound, Caldwell
county, North Carolina; 63, of black flinty slate, very hard, from a
mound, Poinsett county, Arkansas; and 64, of argillite, from a mound,
Monroe county, Tennessee.

  +---------------------+---+---+---+---+---+---+---+---+---+---+---+---+---+
  |      District.      | A | B | C | D | E | F | G | H | I | J | K | L | M |
  +---------------------+---+---+---+---+---+---+---+---+---+---+---+---+---+
  |Northwestern         |   |   |   |   |   |   |   |   |   |   |   |   |   |
  |  North Carolina     |   | 2 | 2 | 1 |   |   |   |   |   |   |   |   |   |
  |Montgomery county,   |   |   |   |   |   |   |   |   |   |   |   |   |   |
  |  North Carolina     |   | 1 |   |   |   |   |   |   |   |   |   |   |   |
  |Eastern Tennessee    | 1 |53 |   |   | 5 |   | 1 |   | 4 |   | 7 | 2 |   |
  |Western Tennessee    |   | 1 |   |   |   |   |   |   |   |   |   |   |   |
  |Northwestern Georgia |   |   |   |   | 1 |   |   |   |   |   | 1 |   |   |
  |Savannah, Georgia    |   | 2 | 1 |   | 1 |   |   |   |   |   | 1 |   |   |
  |Union county,        |   |   |   |   |   |   |   |   |   |   |   |   |   |
  |  Mississippi        |   |   |   |   |   |   |   |   | 1 |   |   |   |   |
  |Butler county, Ohio  |   |   |   |   |   |   |   |   |   |   |   | 1 |   |
  |Northeastern Arkansas|   |   | 1 |   |   |   |   |   | 1 |   |   | 1 | 1 |
  |Southeastern Arkansas|   |   |   | 1 |   |   |   |   |   |   |   |   |   |
  |Kanawha valley,      |   |   |   |   |   |   |   |   |   |   |   |   |   |
  |  West Virginia      |   |   | 2 |   |   | 6 | 2 | 2 | 1 | 1 |   |   |   |
  |Northeastern Kentucky|   |   | 1 |   |   |   | 1 | 1 |   |   |   |   |   |
  |Green river, Kentucky|   |   | 1 |   |   |   |   |   |   |   |   |   |   |
  |Coosa district,      |   |   |   |   |   |   |   |   |   |   |   |   |   |
  |  Alabama            |   | 1 |   | 1 | 1 |   |   |   |   |   |   |   |   |
  +---------------------+---+---+---+---+---+---+---+---+---+---+---+---+---+

  KEY:
  A = Marble.
  B = Argillite.
  C = Sienite.
  D = Quartzite.
  E = Serpentine.
  F = Diorite.
  G = Porphyry.
  H = Granite.
  I = Sandstone.
  J = Hornblende.
  K = Compact quartzite.
  L = Slate.
  M = Chert.

[Illustration: FIG. 62.--Thin polished celt.]

[Illustration: FIG. 63.--Thin polished celt.]

[Illustration: FIG. 64.--Thin polished celt.]


GOUGES.

While there are perhaps no true gouges in the collection, there are
some examples of a form between a celt and a gouge, illustrated in
figure 65, of serpentine, from Caldwell county, North Carolina.

Implements of this form are known to have been used to tap sugar
maples, and also to hollow out wooden troughs, and are very common
in the north, though less abundant in the south.[20] It is in those
localities in which bark instead of logs was used for canoes that
they are most numerous. Sometimes they were hollowed the whole length
and used as spiles.[21] They were also employed instead of celts in
hollowing wooden mortars and the like when a more regular concavity was
desired.[22]


CHISELS AND SCRAPERS.

The aboriginal implements known as “chisels” are round, elliptical, or
rectangular in section. The flint and jasper specimens are generally
widest at the edge, the reverse being usually the case with those
of other material. Most of them have marks of hammers at the blunt
end, though some are polished at the top and a few, from eastern
Tennessee, are sharp at both ends. The top (except in the double-edged
ones) is usually flat, though a few are pointed or very thin, almost
with cutting edges. Jaspers and flints are chipped, with the facets
polished, the edges highly so. Any form may occur in any locality.
Almost invariably they have scraper-form edges. The length is from 2 to
6 inches.

[Illustration: FIG. 65.--Celt, showing thin, gouge-form edge.]

Typical examples are shown in figure 66, of yellow jasper, from a
grave in Mississippi county, Arkansas; figure 67, of novaculite,
from an unknown locality in Arkansas; figure 68, of serpentine, from
Bradley county, Tennessee; figure 69, of sienite, from Caldwell county,
North Carolina; and figure 70, of gray jasper, from Bradley county,
Tennessee. Some specimens are sharp and worn at both ends, and could
have been used only with handles.

[Illustration: FIG. 66.--Celt, chisel-form.]

[Illustration: FIG. 67.--Celt, chisel-form.]

[Illustration: FIG. 68.--Celt, chisel-form.]

The Bureau collection includes the following specimens:

  -----------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  |     District.  | A| B| C| D| E| F| G| H| I| J| K| L| M| N| O| P| Q|
  -----------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  Northwestern     |  |  | 1| 2| 1|  |  |  |  |  |  |  |  |  |  |  |  |
    North Carolina |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
  Northeastern     |  |  |  |  |  |32| 5| 2| 4| 1| 1| 1|  |  |  |  |  |
    Arkansas       |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
  Southeastern     |  |  | 1|  |  | 2|  |  |  |  |  |  | 3|  |  |  |  |
    Arkansas       |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
  Coosa district,  |  | 1|  |  |  |  |  |  |  |  | 1|  |  |  |  |  |  |
    Alabama        |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
  Warren county,   |  |  |  |  | 1|  |  |  |  |  |  |  |  |  |  |  |  |
    Ohio           |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
  Southwestern     | 2|  | 1|  |  |  |  |  |  |  |  |  |  |  |  |  |  |
    Illinois       |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
  Eastern Tennessee|  |  |  |40|  |  | 1|  |  |  |  |  |  | 2| 1| 3| 1|
  Union county,    |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  | 1|  |
    Mississippi    |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
  Kanawha valley,  |  |  |  |  |  |  |  |  |  |  |  | 5|  |  |  |  |  |
    West Virginia  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
  Northwestern     |  |  |  | 1|  |  |  |  |  |  |  |  |  |  |  |  |  |
    Georgia        |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
  Savannah, Georgia|  |  |  | 1|  |  |  |  |  |  |  |  |  |  |  |  |  |
  -----------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

  KEY:
  A = White flint.
  B = Serpentine.
  C = Sienite.
  D = Argillite.
  E = Granite.
  F = Yellow jasper.
  G = Gray jasper.
  H = Mottled jasper.
  I = Red jasper.
  J = Silicified wood.
  K = Quartzite.
  L = Black flint.
  M = Novaculite.
  N = Compact quartzite.
  O = Porphyry.
  P = Sandstone.
  Q = Hornblende.

The high polish sometimes found on the top of a round-pointed celt may
be due to its working slightly in the socket in its handle of wood,
deerhorn, or other material.

[Illustration: FIG. 69.--Celt, chisel-form.]

[Illustration: FIG. 70.--Celt, chisel-form.]

By celts having a scraper-form edge is meant those having the edge to
one side of the median line, due to constant use of one face. This
face, at the edge, is in a straight line from side to side; it may have
a chisel-like flattening, or may curve toward the middle of the celt
for a short distance and then have the same form to the top as the
other face, which is convex or curved, as in the ordinary hatchet-celt.
They form a medium between celts whose faces gradually curve from top
to edge, and the celt-scrapers which are flat on one side. Among the
thicker celts this form is quite rare, though several, especially one
from Kanawha valley, West Virginia (represented in figure 74), are
quite pronounced. In the thinner specimens, however, a majority are of
this pattern, while in some types, nearly all indeed, even those up
to 6 inches long, are so beveled. The type, of which an illustration
is shown in figure 71, is of very hard black slate; the same form is
presented in figures 66 and 70.

From Bartow county, Georgia, is a scraper made from the edge of a celt
which has been broken diagonally across from one face to the other. A
stem like that of a spear-head has been formed by chipping away the
sides of the part broken, which gives a convenient attachment for a
handle; the original edge is unchanged except in the wear which has
resulted from its new use.

The specimen shown in figure 72 (of argillite, from McMinn county,
Tennessee) is introduced on account of its undoubted use as a scraper,
and because it is much smaller than some of the chipped flints thus
classified, the edge being less than an inch wide; the sides are
roughly incurved.

In Bradley county, Tennessee, there were found over 200 specimens of
very small, thin, flat, waterworn sandstone pebbles, which were mostly
in their natural condition, except that they had one side rubbed to a
sharp edge. A few, more slender, were ground to a point. Some of them
have a handle chipped out on the side opposite the edge, sometimes with
nicks in it, made for attachment to a handle by means of a cord. Most
of these specimens are less than 2 inches in length. No suggestion is
offered as to their use.

[Illustration: FIG. 71.--Celt, showing scraper-form edge.]

[Illustration: FIG. 72.--Scraper.]

A granite implement from Union county, Illinois, with nearly
rectangular section, slightly curved sides, rounded corners, and high
polish over the entire surface, having nearly the same thickness
(about an inch) at every part, would seem to be a polishing or rubbing
stone. There are, however, one from Warren county, Ohio, and three
from Kanawha valley, West Virginia, of almost exactly the same size
and pattern, which have had one end ground off to a sharp edge; so the
specimen may be only an unfinished celt. One of those from Kanawha
valley has had the edge partly broken away, and one face has been
pecked considerably in an attempt to restore it for use; but the
intention was not carried out. Some celts, not of the scraper pattern,
which have the edge to one side of the median line, are perhaps broken
or blunted specimens redressed on one side only.

[Illustration: FIG. 73.--Scraper or adze, with projecting ridge.]

[Illustration: FIG. 74.--Adze or scraper.]

Figure 73 exhibits a specimen of argillite from Carter county,
Tennessee, probably an adze or scraper, with a projection to keep the
implement from being forced into the handle. The edge is symmetrical,
though much striated. The specimen shown in figure 74 (of granite, from
Kanawha valley, West Virginia) represents a peculiar form. There are
several like it in the collection, all but this one from islands in the
Pacific.


CHIPPED CELTS.

On account of their shape and undoubted use, a class of celts, although
neither pecked nor ground, is introduced. Many of them resemble, in
most respects, the so-called paleolithic implements, though sometimes
of better finish. They are made with a rounded top and nearly parallel
sides; rudely triangular; or with the sides curved to a point at the
top. The edge may be straight or curved, and is usually chipped,
though sometimes ground; a few are chisel-shaped. Usually they show
no signs of wear; when they do, it is always in the form of a polish
at the larger end, or on the exposed facets. One of black flint, 8
inches long, from Kanawha valley, has a scraper-form edge, smoothly
polished. Many, even of those scarcely changed from their original form
and natural surface, have the edges dulled and polished from use as
scrapers or adzes.

[Illustration: FIG. 75.--chipped celt.]

[Illustration: FIG. 76.--Chipped celt.]

[Illustration: FIG. 77.--Chipped celt.]

The collection includes the following examples: 36 of argillite,
flint, porphyry, and compact quartzite, from Montgomery county, North
Carolina, some with the wider edge sharp (figure 75, of flint); 12
of limestone and flint from Mason county, Kentucky; 70 of argillite,
a few with the edges ground, from southeastern Tennessee (figure 76,
from McMinn county); over 300 from Kanawha valley, nearly all of black
flint, a few being of diorite or quartzite--some are partly polished,
or have ground edges (figure 77, of black flint, from a mound).


HEMATITE CELTS.

With the exception of two from Iowa and a few from Preston county, West
Virginia, the hematite celts in the collection are from Kanawha valley,
and are small, ranging in length from 1 to 2¾ inches, except one 4½
and one 5½ inches. They are illustrated in figures 78, 79, 80, and 81,
the last from a mound. Nearly all have been ground directly from the
nodule or concretion in which this ore of iron so frequently appears.
Occasionally one of homogeneous structure has been chipped into form
before grinding, the facets in some cases being rubbed nearly away.
Sometimes they have a rectangular outline, but usually the sides taper
from the edge to the top by a gradual curve, or are parallel a part of
the way and then taper either by a straight or, oftener, by a curved
line. The section is rectangular or elliptical.

[Illustration: FIG. 78.--Hematite celt.]

These implements were probably used as knives or scrapers, being set
into the end of a piece of antler, which may in turn have been set
into a larger handle of wood. That some were knives is shown by the
edge which is dulled to a flat polished surface extending from side to
side; and that many were scrapers is shown by their celt-scraper shape,
a half elliptical section, or by the scraper-form edge, seen in the
largest specimen. Some, however, have the edge symmetrical, as in the
hatchet-celts. One has incurved sides, and is roughened on the sides
and on the faces near the top.

[Illustration: FIG. 79.--Hematite celt.]

[Illustration: FIG. 80.--Hematite celt.]

[Illustration: FIG. 81.--Hematite celt.]


PESTLES.

The fact of the ordinary conical or bell-shaped, long-cylindrical, or
somewhat pear-shaped stones having been used for pestles is so well
settled that no confirmatory references are needed. A few citations
may be given in regard to certain forms sometimes differently classed,
especially some of the discoidal stones to be hereafter described.

According to Stevens, the corn crushers used by the Swiss lake dwellers
are spherical; some are flattened on two sides, like an orange, others
almost round with depressions on four sides. They are about the size
of a man’s fist or rather smaller. The Africans have a piece of quartz
or other hard stone as large as half a brick, one side of which is
convex, to fit the hollow of a larger stone used as a mortar.[23]
Evans observes that disks sometimes show marks of use as hammers or
pestles;[24] one found at Ty Mawr was thick, with a cavity on each
face.[25] In preparing pemmican, the American Indians are known to
have pounded the dried meat to a powder between two stones.[26] This
gives the impression that any suitable stones may have been used; and
the ancient California Indians worked out a round stone as an acorn
sheller, modern tribes using any smooth stone.[27]

[Illustration: FIG. 82.--Handled pestle, with expanding base.]

The pestles which have the bottom round or convex are generally found
in the same localities as the hollowed stone mortars. Several forms of
pestles are represented in the collection. They may be grouped as in
the following description and tabulation.

_A._ With expanding base; bottom flat or slightly convex, often with
a slight depression in the middle. Handle tapering, or of uniform
diameter to the top; in a few, slightly swelling above as if to give a
firmer hold. Top rounded, flat, or pointed. Bottom may be very little
expanded or may have twice the diameter of the handle. Probably used
for pounding grain or seeds on a flat stone, as it could not be used
in a mortar even slightly hollowed. None seem to have been used as
mullers or rubbers. They may have served for hammers, and would be
excellent for cracking nuts, as the pit in the bottom would tend to
keep them from flying out to the side. The type is shown in figure 82,
of quartzite, from Sullivan county, Tennessee. The distribution is
moderately wide, and the material chiefly granite and quartzite, with a
few of other rock varieties, as shown in the table:

  +------------------------------+---+---+---+---+---+---+
  |      District.               | A | B | C | D | E | F |
  +------------------------------+---+---+---+---+---+---+
  |Northeastern Kentucky         |  2|  2|   |   |  1|   |
  |Eastern Tennessee             |  3|  6|   |   |   |  1|
  |Ross county, Ohio             |  2|  1|   |   |   |   |
  |Miami valley, Ohio            |  1|  7|  1|  2|   |   |
  |Southwestern Illinois         |   |  1|   |   |   |   |
  |Kanawha valley, West Virginia |  1|  1|   |  1|  1|   |
  +------------------------------+---+---+---+---+---+---+

  KEY:
  A = Quartzite.
  B = Granite
  C = Sienite
  D = Diorite.
  E = Sandstone.
  F = Argillite.

_B._ Almost cylindrical, from 6 to 18 inches long and about two inches
in diameter. Some of the larger ones were probably rolling-pins, as
the ends, either from some fancy finish, or because worked to a point,
are of a shape that would make their use as pestles impracticable.
Even as rollers, some must have been used for crushing grain that had
previously been softened or was not fully matured, as they are of a
soft stone that would wear very easily. The shorter ones are blunt at
the ends, and may have been used in a shallow wooden mortar; none are
adapted for use in stone. The class is illustrated by figure 83, of
soft clay slate, from Cherokee county, Georgia.
  +------------------------------------+---+---+---+---+---+
  |  District.                         | A | B | C | D | E |
  +------------------------------------+---+---+---+---+---+
  |Montgomery county, North Carolina   |  1|   |   |   |   |
  |Northwestern North Carolina         |  1|   |   |   |   |
  |Eastern Tennessee                   |  3|  2|  3|  1|   |
  |Butler county, Ohio                 |   |   |   |  1|   |
  |Northwestern Georgia                |   |   |  1|  1|   |
  |Hopkins county, Kentucky            |   |   |   |   |  1|
  +------------------------------------+---+---+---+---+---+

  KEY:
  A = Argillite.
  B = Soft slate.
  C = Clay slate.
  D = Mica-schist.
  E = Quartzite.

[Illustration: FIG. 83.--Pestle, long cylindrical form.]

[Illustration: FIG. 84.--Pestle, conical.]

_C._ Conical, or truncated cone, bottom flat, convex or curved from
one side to the opposite. Some are quite smooth on the bottom as if
from rubbing either back and forth or with a rotary motion; while many
have the bottom pecked rough, showing use as hammers or pounders. For
those with curved bottoms a rocking motion seems best adapted; with
the palm resting on the longer side, good work could be done in any of
these ways. Typical specimens are shown in figures 84, of quartzite,
from Monroe county, Tennessee; 85, of granite, from Warren county,
Ohio; and 86, of quartzite, from Saline county, Arkansas. A somewhat
aberrant specimen, shown in figure 87, of granite, from Carter county,
Tennessee, has an elliptical base, rounded top, and flat bottom; the
longer sides grooved for handle. A similar one, of quartzite, came
from Warren county, Ohio. There is considerable variety of material,
quartzite largely predominating. Although the geographic range is
wide, the distribution is rather sparse, and several districts are not
represented.

  +---------------------------------+---+---+---+---+---+---+---+
  |          District.              | A | B | C | D | E | F | G |
  +---------------------------------+---+---+---+---+---+---+---+
  |Southeastern Arkansas            |  2|   |   |   |   |   |   |
  |Central Arkansas                 |  1|   |   |   |   |   |  1|
  |Eastern Tennessee                | 12|  1|   |   |  1|   |   |
  |Miami valley, Ohio               |  3|   |  1|   |  3|  2|   |
  |Montgomery county, North Carolina|   |   |  1|  1|   |   |   |
  |Kanawha valley, West Virginia    |  2|   |   |   |   |   |  1|
  +---------------------------------+---+---+---+---+---+---+---+

  KEY:
  A = Quartzite.
  B = Marble.
  C = Sienite.
  D = Hornblende.
  E = Granite.
  F = Diorite.
  G = Sandstone.

[Illustration: FIG. 85.--Pestle.]

[Illustration: FIG. 86.--Pestle.]

[Illustration: FIG. 87.--Pestle, grooved for handle.]

[Illustration: FIG. 88.--Pestle.]

_D._ Conical, or truncated cone, with top more or less rounded, very
little worked, a stone of approximate form having been chosen and the
angles and corners pecked off; bottom flat, and in some quite smooth;
used as pestles or mullers. The group is represented by 17 specimens of
quartzite, all from southeastern Tennessee.

_E._ Not dressed at all on the sides, but with both ends worn to
a convex shape. Represented by two specimens of quartzite from
southeastern Tennessee.

_F._ Cylindrical, flat bottom, dome-shaped top, these portions having
been carefully pecked into shape. Some are smoothly polished on the
bottom, but none elsewhere. Those from Miami valley, and one from
Kanawha valley are much longer than the others. The type illustrated in
figure 88 is of quartzite, from McMinn county, Tennessee.

  +-----------------------------+---+---+---+---+
  |      District.              | A | B | C | D |
  +-----------------------------+---+---+---+---+
  |Eastern Tennessee            |  5|  1|  1|   |
  |Kanawha valley, West Virginia|  1|   |  3|   |
  |Miami valley, Ohio           |   |   |  1|  1|
  +-----------------------------+---+---+---+---+

  KEY:
  A = Quartzite.
  B = Porphyry.
  C = Sandstone.
  D = Limestone.


PITTED STONES.

There is scarcely a locality in the country where pitted stones are not
found; they are indeed of such frequent occurrence that they are seldom
considered worth the trouble of gathering.

There can be no “type” among such crude implements; they are almost
invariably waterworn sandstone pebbles, with a pit varying from a
slight roughening of the surface to a hollow half an inch in depth
pecked in each face. They probably belong with hammerstones, as they
seldom show other marks of work, the edge in some being only slightly
marked in one or two places, while in others it is much worn.

Various numbers of the Journal of the Anthropological Society of Great
Britain and Ireland refer to pitted stones as found in every part
of the world. According to Evans, slight pits aid in holding stone
hammers; they also prevent the jar to a large extent. If used to pound
meat or break bones, it would be hard to hold them when greasy without
pits.[28] Such implements may have had handles of wood with projections
to fit the pits,[29] though this is not probable; but if so a piece of
buckskin on the handle opposite the pits would do better and be more
convenient to apply.


CUPPED STONES.

Conjecture and theory have had full sway in regard to the uses of
cupped stones; but the question is apparently far from solution. There
is a prevalent idea that they were used for cracking nuts; but why
should an Indian make a large number of holes in a great many stones
for such purpose? It is true there would be an advantage in having the
nut stand on one end; but very few stones have depressions that will
allow this.

Of the southern Indians Adair observes:

    They gather a number of hiccory-nuts, which they pound with a
    round stone, upon a stone, thick and hollowed for the purpose.
    When they are beat fine enough, they mix them with cold water,
    in a clay basin, where the shells subside. The other part is
    an oily, tough, thick, white substance ... with which they eat
    their bread.[30]

Lawson’s language regarding the Indians of North Carolina is even more
definite. He says:

    [They gather] likewise hickerie nuts, which they beat betwixt
    two great stones, then sift them, so thicken their venison
    broth therewith, the small shells precipitating to the bottom
    of the pot, whilst the kernel, in the form of flour, mixes it
    with the liquor, both these nuts [hickory and chinquapin] made
    into meal makes a curious soup, either with clear water, or in
    any meat broth.[31]

Neither of these statements seems to have any reference to cupped
stones. The first is a good description of a mortar with a round
pestle, while the second says nothing about any particular form of
stone; yet they have been referred to time and again as proof of the
nut-stone theory. There would be some difficulty in pounding nuts fine
in small holes half an inch or more below where the pounding stone
could reach.

C. C. Jones[32] was satisfied that cupped stones were used for cracking
nuts because great numbers of nut-bearing trees grow where they are
found; while Whittlesey, noting the fact that hundreds of them are
found throughout northern Ohio, considered them as sockets in which
the end of a spindle rested. Dawson[33] speaks of “stones having deep
hollows in the sides which were mortars for grinding pigments, or
sockets for fire drills.”

The cupped stones in the Bureau collection are almost invariably of
reddish sandstone, of varying texture, from a few ounces to 30 pounds
in weight. The holes are from one to twenty-five in number, of various
sizes even in the same stone, and follow the natural contour of the
surface even when that is quite irregular; the stone is never dressed
or flattened to bring the cups on a level; none show any marks of work,
but are the rough blocks or slabs in their natural state.

Many of the holes are roughly pecked in, but the larger ones
are usually quite smooth, as if ground out, and almost complete
hemispheres. They range from a pit only started or going scarcely
beyond the surface to one 2 inches in diameter. The smaller ones with
one cup pass into the pitted stones. Occasionally at the bottom of a
large cup there is a small secondary hole as though made by a flint
drill.

The polished cups may have been used for fire-drill or spindle sockets,
though why there should be a number of holes when but one could be used
at a time awaits explanation. The rough ones may have been for holding
nuts, and so long as they were on the same plane any number could be
utilized; but when they are on different parts of the stone, even on
opposite sides, as many of them are, the question remains open. Slabs
or thin pieces nearly always have cups on both sides, while blocks or
thick slabs have them on one side only. On the former a number of
nuts could be cracked with one blow of a flat stone and thrown into
a receptacle of some kind, either side of the stone being used at
pleasure; but there would be no economy of time or work in this method,
and it would be very strange that any one should not learn with so
much experience that a nut should never be laid on the flat side in
cracking. No theory yet advanced accounts for the greater number of
such relics, namely, the irregular fragments of stone with cups at
varying intervals and different levels.

No division can be made in regard either to size or material of the
stone, or to form or finish of the cups. Many of the smaller ones were
no doubt paint mortars. One well finished specimen of this class is
shown in figure 89; it is of quartzite from 4 feet beneath the surface
in Crittenden county, Arkansas.

[Illustration: FIG. 89.--Cupped stone or paint cup.]

Cupped stones are found wherever representatives of the Bureau have
worked, and numerous references might be given concerning their
existence in other localities.


MULLERS.

The objects known as mullers are generally flat and smooth on one side
and convex on the other, sometimes with a pit in one side or both,
mostly of granite, quartzite, or sandstone; rarely of other materials.

A fine specimen of white quartz from Elmore county, Alabama, has the
bottom flat and highly polished, the edge perpendicular to bottom and
rounding off into the slightly convex top, with a pit at center. Figure
90 represents a muller of marble or crystalline limestone from a grave
in Randolph county, Illinois. It has a smooth, flat bottom, with convex
top somewhat smaller than the base; around the circumference there is
a depression polished by wear. A similar specimen, of diorite, from
Carter county, Tennessee, seems to be the lower part of a pestle with
expanding base, whose top or handle has been lost, the part remaining
having a place for a handle pecked around it.

[Illustration: FIG. 90.--Muller, showing polished surface.]

The discoidal stones with this shape were probably used as mullers;
they were also used as pestles in the hollow mortars, as the edge
is often chipped or pecked, which would account for the pits on the
faces. Figure 91 represents a muller of granite from Savannah, Georgia.
Sometimes the base has an elliptical instead of a circular outline, as
seen in other specimens from Savannah.

Mullers are found wherever there are indications of occupancy for any
considerable length of time.


GRINDING AND POLISHING STONES.

Stones evidently used for grinding and polishing need only to be
mentioned, as they are of widespread occurrence. Implements used for
the former purpose are made of any siliceous stone of convenient
size and suitable texture, from a coarse quartzite to a very fine
close-grained sandstone, according to the class of work to be done. The
markings on them range from the narrow, sharp, incised lines due to
shaping a small ornament, to the broad grooves resulting from grinding
an ax or celt into form. Nearly all of those in museums are small
specimens used for rubbing; but there are many large blocks in various
localities, sometimes several feet square, marked and scored in every
direction by grinding or sharpening the large implements on them.

Among the polishers may be included a number of small pebbles of very
hard siliceous stone, generally some form of quartz, which by the high
polish show long use. The larger ones may have been used for rubbing
skins in tanning, as they can easily be grasped in the hand. Very
few have changed from their primitive form to a greater degree than
would naturally result from the wear upon them. A few very small ones,
long-ovoid in shape, usually not over 2½ or 3 inches in length, were
probably paint mullers, as they are well fitted for use in small paint
cups. Many of the discoidal stones--which will be spoken of under
the proper head--may have had these functions. The highly polished
specimens are all from the southern states. There is one rubbing stone
of pumice from Craighead county, Arkansas.

[Illustration: FIG. 91.--Muller, showing polished surface.]


HAMMERSTONES.

Hammers or hammerstones show every stage of work, from the ordinary
pebble or fragment, with its surface scarcely altered, to the highly
polished round or ovoid “ball.” They are usually of the hardest
available material, and seem to be of more frequent occurrence in
the northern districts than in the southern states, though found
everywhere. Used in their earlier stages merely as tools with which to
fashion other implements, they were assigned to specified purposes when
brought to a better finish or form. A typical example, shown in figure
92, is of granite, from Ross county, Ohio.

The Sioux used an oval stone, with a piece of rawhide covering all but
the point and attaching it to a withe handle,[34] while the Shoshoni
and Ojibwa made use of a round stone, wrapped in leather, attached by
a string of 2 inches to a handle 22 inches long covered with leather;
this was called a poggamoggan.[35] Rounded stones are said to have
been used by the California Indians as bolas,[36] though it is more
probable that they were slung-shots. The ancient Californians worked
out a round stone for an acorn-sheller; the present Indians use any
smooth stone.[37] Elaborately carved round stones, mounted in handles
as clubs, are known to have been used by the Queen Charlotte Island
Indians for killing fish,[38] and other northwestern Indians have been
observed to use a round stone inclosed in a net and attached to a line
as a sinker.[39]

[Illustration: FIG. 92.--Hammerstone.]

It is not necessary to quote references to the well-known fact that the
Eskimo and the Patagonians made use of round stones of various sizes as
bolas. There is no evidence that our Indians ever used anything of the
sort.


GROOVED STONES OTHER THAN AXES.

Three subclasses of grooved stones, differing in essential features
from axes, may be discriminated. They are as follows:

[Illustration: FIG. 93.--Grooved round stone.]

_A._ Slightly or not at all worked, except the groove; often showing
marks of violent usage. With these may be classed the large stone
hammers of the Lake Superior region.

_B._ Round or ellipsoid stones; in the latter the groove may follow
either axis. The type (figure 93) is of sandstone from Carter county,
Tennessee.

_C._ Resembling axes in all but the edge. Of class _A_ there are none
in the collection; their form and size are such that they could have
been for no other purpose than hammerstones. Of class _B_ there are
some from Savannah, which may be sinkers or club heads. According to
Morgan, oval stones with grooves were secured in the heads of war
clubs,[40] and Carver observed that the southwestern Indians used as
a slung-shot a curiously worked stone, with a string a yard and a
half long tied to it, the other end being tied to the arm above the
elbow.[41]

The specimens of class _C_ may be broken axes. Figure 94 (granite,
from Butler county, Ohio) shows a form quite common throughout central
and western Ohio. They are generally small, have evidently never been
sharp, and were in all probability intended for hammers from the
beginning.


MORTARS.

The Indian mortars in the collection are nearly always of sandstone of
varying degrees of fineness. As is the case with cupped stones, when
made of slabs, both sides have been worked; when of rough blocks, only
one.

The Senecas and Cayugas are said by Morgan to have used wooden mortars
in which to pound corn after it was hulled,[42] and it is possible that
the long pestles of soft stone were used with wooden mortars, though
some are not well adapted to this use. The Iroquois women pounded in
stone mortars the stony material used in tempering the clay for their
pottery.[43] The California Indians made mortars by knocking a segment
off a bowlder, making a flat surface, and working out with a hammer
and chisel,[44] while the tribes of the interior worked directly from
the surface of a suitable rock. The Yokuts, according to Powers, use
tolerably well made stone mortars, and sometimes place a basket-like
arrangement around the top to prevent the acorns from flying out.[45]

[Illustration: FIG. 94.--Grooved hammer.]

No two specimens of the mortars and metate-like stones in the Bureau
collection are alike; the nearest approach that can be made to a
classification is as follows:

_A._ Smooth and flat on one or both sides; for use with mullers; from
McMinn county, Tennessee, and Allamakee county, Iowa.

_B._ With round cavities on one or both sides; for round or cylindrical
pestles; from McMinn county, Tennessee. A cobblestone from Bradley
county, Tennessee, has a shallow cavity in either side and a pit in the
center of each. From Kanawha valley there is a slab weighing about 25
pounds, flat and smooth on one side, as though primarily used with a
muller and the regular even cavity afterward made; on the other side a
cavity and a cupped hole have been worked in from the natural surface.
A slab from Warren county, Ohio, has a shallow cavity worked into one
side and a cupped hole in the other. From Union county, Mississippi,
there is a flattened bowlder with a shallow cavity on each side; a
shallow cup has been pecked on the edge of one of them. From Caldwell
county, North Carolina, comes a bowlder of water-worn mica-schist,
with a shallow cavity and a deeper one on one side, and on the other a
cupped hole opposite each of these cavities.

_C._ With one side hollowed out, the other flat and smooth. Specimens
of this type come from Caldwell county, North Carolina; McMinn county,
Tennessee, and Bradley county, Tennessee, the last with a pit in the
center and another on the edge of the flat side.

_D._ With a long, narrow depression on each side. A very large specimen
of fine-grained sandstone from Lincoln county, Arkansas, represents
this type.

There are, in addition, two pieces of fine-grained sandstone with
uniform thickness of less than an inch and about 10 inches across, from
Kanawha valley, West Virginia, and Hale county, Alabama, respectively.
Both sides are ground perfectly smooth, and flat. The objects were
probably for some culinary purpose.


SINKERS.

The sinkers in the collection may be divided into four classes, viz:
_A_, entirely unworked; _B_, notched on the sides; _C_, encircled by
a groove; and _D_, perforated. Conversely, stones under all these
different heads may have served other and widely different purposes.

Of the functions of class _A_, only those who have seen them in use
can speak. Stevens mentions that some tribes inclose a round stone in
a sort of net and attach it to a line in fishing;[46] and no other use
can be imagined for some of the specimens in the Bureau collection.

Specimens of class _B_ are found along water courses in such situations
as to leave no doubt of their use as sinkers;[47] they were attached to
grapevines and dragged on the bottom of streams to frighten fish into
nets or traps.[48] Those in the collection are made of ordinary flat
water-worn pebbles, with notches rudely chipped in the sides; a number
are from southeastern Tennessee.

Of class _C_, while many were perhaps sinkers, more were club heads
and slungshots or hammers. A number have been obtained from Savannah,
Georgia, more or less worked, some being rounded, with grooves of
varying depths and sizes. Small stones of this form are used by
Greenland fishermen as sinkers;[49] and according to Thatcher, a large
stone is by the Indians made fast to a sinking line at each end of a
net, and the net is spread in the water by sinkers at different parts
of it.[50]

Class _D_ will be referred to under the head “Perforated stones,” from
which they can be discriminated only arbitrarily.

A number of roughly chipped, somewhat crescent-shaped specimens of
argillite, from half a pound to 2 pounds in weight, collected in
Montgomery county, North Carolina, may have been used as sinkers.


PERFORATED STONES.

Only the larger or rougher perforated stones used as implements are
included in this class.

Several perforated pieces of steatite, some mere rough fragments,
others with the edges smooth and dressed to a somewhat symmetrical
outline, have been collected about Savannah, Georgia. Some of these
have been drilled, others gouged through apparently with a slender
flint. In the latter group the little projections left by the tool have
been worn smooth. The hole may be near one end or about the center.
Similar pieces have been found in Forsyth county, Georgia; one of
these is worked to an irregular pentagon and smoothly finished. From
Haywood county, North Carolina, there are some very rough fragments,
apparently just as they were picked up, except for the perforation; and
a number of pieces of perforated pottery are from Montgomery county,
North Carolina.

Perforated stones were used by the southern Indians to drag along the
bottoms of streams and frighten fish into their nets and traps.[51]
Four disks 4 to 5½ inches in diameter, with handles from 13 to 17
inches long, were found in a cave at Los Angeles, California,[52] and
objects of this character were, according to Schumacher, used by the
Santa Barbara Indians as weights for wooden spades.[53] According to
Abbott many perforated stones are found close to rivers and on shores
in such positions as to leave no doubt of their use as sinkers.[54]
Similar stones were used as sinkers by the Scandinavians in
comparatively recent times; by the Bechuanas for grinding grasshoppers,
spiders, etc., and also as weights for digging-sticks; by some savages
in the Pacific islands as clubs; by the Icelanders for breaking up
salted fish.[55] They were used by the Iroquois as weights for fire
drills;[56] by the Eskimo as clubs, having a rawhide handle secured
by a knot.[57] According to Dale,[58] Layard,[59] Griesbach,[60] and
Gooch,[61] they were used by natives of southern Africa as root-diggers
(to remove earth from the roots), as weapons, and to give weight to
digging-sticks. They were also used by the Peruvian Indians to be
thrown with a stick. Disk-shaped and cylindrical throwing stones,
perforated for the stick, are found among the Swiss lake dwellings.[62]
According to Evans[63] they were used mostly as hammers or clubs. They
are hard and battered on the edges; sinkers would be of softer stone.

The most complete article that has yet been given concerning the forms
and uses of perforated stones is that by H. W. Henshaw.[64]


DISCOIDAL STONES.

There are numerous references to discoidal stones by various writers,
but a majority of the objects do not fall under any explanation that
has so far been given.

The Choctaw Indians used disks two fingers wide and two spans around
in playing “chungke,”[65] and the Indians of North Carolina were
much addicted to a sport called “chenco,” played with a staff and a
bowl made with stone.[66] The same kind of game was, or still is,
played with hoops or rings of wood or rawhide by the Iroquois,[67]
the Pawnee,[68] the Apache,[69] the Navajo,[70] the Mohave,[71] and
the Omaha;[72] also, with rings of stone, by the Arikara,[73] the
Mandan,[74] and other tribes.

The game of chungke, however, will account for only a small part of
the great number of stones of this form. The Indians of southern
California, in manufacturing pottery, make the clay compact and smooth
by holding a rounded and smooth stone against the inside.[75] The
Fijians, in making pottery, use a small, round flat stone to shape the
inside,[76] while the Indians of Guiana use ancient axes or smooth
stones for polishing the clay in making their vessels.[77] According to
Evans,[78] pitted disks were used as pestles, hammers, or mullers; a
thick one with pitted ends was found in a mortar at Holyhead.[79] Under
the head of pestles and of perforated stones further references will be
found that may apply as well to this form of implements.

No kind of relic is more difficult to classify. From the smooth,
symmetrical, highly-polished chungke stone they gradually merge into
mullers, pestles, pitted stones, polishers, hammers,[80] ornaments,
and the ordinary sinker or club-head, so that no dividing line is
possible. Theories constructed on a basis of their use may be far from
correct.

They present various forms and degrees of finish; many have the
natural surface on both sides with the edge worked off by grinding or
pecking, the latter being produced probably by use as a hammer; the
sides may be ground down while the edge remains untouched; or the sides
may be pecked and the edge ground, being probably of a thick pebble
originally. Some of the finer grades, as chalcedony and quartz, that
have received the highest finish, appear to have had all the work done
by grinding or rubbing, as even those only slightly worked bear no
signs of hammering or pecking. When of the harder materials they are
generally made of water-worn pebbles as nearly the desired form as can
be found; in fact, some specimens which are in their natural state,
entirely unworked, require a very close examination to distinguish them
from others whose whole surface has been artificially produced. In the
jasper conglomerates from Arkansas, however, there is a regular series
from a roughly chipped disk to one of the highest polish and symmetry.
The larger ones of quartz, particularly those with concavities in the
sides, must have been patiently wrought for years before brought to
their present state. Many of the smaller ones, especially sandstone,
seem to have been designed for grinding or polishing.

[Illustration: FIG. 95.--Discoidal stone.]

The following groups are represented in the collection:

_A._ Sides hollowed out, edge convex; 2 to 6 inches diameter,
seven-eighths to 2¾ thick.

1. Edges of concavity sharp.

_a._ Cavity a regular curve from side to side. The type (figure 95) is
of quartz, from Cherokee county, Georgia. There are also, from Kanawha
valley, West Virginia, one of sandstone, of which one side has been
worked out by a flint, the little pits being distinctly visible, while
the other side has natural surface; from Loudon county, Tennessee, one
of quartzite, 6 inches diameter, which has been used as a mortar, the
cavities being roughened, with their edges broken and scarred (the
edge of the stone is battered entirely around midway between the sides
as though used for a hammer); from McMinn county, Tennessee, one of
quartzite, about the same size as last, with a slight pit in the center
of each cavity, the edges of the concavity being considerably chipped,
and the edge of the implement very smooth; from Polk county, Tennessee,
one of quartzite, 3½ inches in diameter, with the edge polished except
in one spot, where it shows marks of use as a hammer or pestle--it
has been used also as a mortar, the edges of the concavity being much
chipped and broken; one each from Craighead county, Arkansas, of
novaculite; Randolph county, Illinois, of granite; Cherokee county,
Georgia, of quartz; and Obion county, Tennessee, of sandstone. In the
four last mentioned the entire surface is quite smooth or even highly
polished.

[Illustration: FIG. 96.--Discoidal stone, with perforation.]

_b._ With a small perforation at the center. The type is shown in
figures 96 (of sandstone, from a grave in Union county, Illinois),
and 97 (of granite, from Virginia). There is another specimen, of
sandstone, from Red River county, Texas.

[Illustration: FIG. 97.--Discoidal stone, with perforation.]

_c._ With a secondary depression in each cavity. Figure 98 (yellow
quartz, highly polished, from Fulton county, Georgia) is typical. There
is also one of quartzite, with a secondary depression in one side only,
from Roane county, Tennessee, which may be supposed, from this and
other imperfections, to be unfinished.

2. Edges of concavity rubbed off blunt. These are grouped simply
by form, as the specimens from Kanawha valley, West Virginia, and
northeastern Kentucky are nearly all roughly finished, quite different
from the smooth or polished ones from farther south. Some are worked
out into the form of a ring, and there is every stage between that
form and the flat disk whose sides show no trace of pecking. Figure
99 (quartzite, from Sevier county, Tennessee) illustrates a typical
example, roughly worked but entirely perforated, and figure 97 shows
the same type in another form.

[Illustration: FIG. 98.--Discoidal stone, with secondary depression.]

[Illustration: FIG. 99.--Discoidal stone, in form of a ring.]

  +-------------------------------+---+---+---+---+---+---+
  |       District.               | A | B | C | D | E | F |
  +-------------------------------+---+---+---+---+---+---+
  |Caldwell county, North Carolina|  1|   |   |   |   |   |
  |Crittenden county, Arkansas    |   |  1|   |   |   |   |
  |Drew county, Arkansas          |   |   |   |  1|   |   |
  |Randolph county, Illinois      |   |   |  1|  2|   |   |
  |Eastern Tennessee              |  1|   |   |  1|   |   |
  |Bartow county, Georgia         |   |   |   |  1|   |   |
  |Kanawha valley, West Virginia  |   |   |   |  1|  1|  1|
  |Northeastern Kentucky          |   |   |   |   | 22|   |
  +-------------------------------+---+---+---+---+---+---+

  KEY:
  A = Quartz.
  B = Novaculite.
  C = Flint.
  D = Quartzite.
  E = Sandstone.
  F = Granite.

_B._ Flat or slightly concave sides, edges straight and at right angles
to the sides; diameter, 1⅝ to 5 inches. The type shown in figure 100 is
of sandstone from Lauderdale county, Alabama.

[Illustration: FIG. 100.--Discoidal stone.]

  +------------------------------+---+---+---+---+---+
  |  District.                   | A | B | C | D | E |
  +------------------------------+---+---+---+---+---+
  |Lauderdale county, Alabama    |  1|   |   |   |   |
  |Mississippi county, Arkansas  |   |  1|  1|  1|   |
  |McMinn county, Tennessee      |  1|   |   |   |  4|
  |Kanawha valley, West Virginia |  1|   |   |   |   |
  +------------------------------+---+---+---+---+---+

  KEY:
  A = Sandstone.
  B = Quartzite.
  C = Very fine schist.
  D = Yellow jasper.
  E = Argillite.

[Illustration: FIG. 101.--Discoidal stone.]

_C._ Sides flat; edges straight, sometimes rounding off into the sides;
diameter, 2¼ to 6 inches; thickness, three-quarters to 2¼ inches.
A number from southeastern Tennessee, especially the smaller ones,
are quite rough, being merely pecked or chipped into shape with no
subsequent rubbing. Figure 101 (chalcedony, from a mound in Monroe
county, Tennessee) represents the type. The material is variable.

  +------------------------------+---+---+---+---+---+---+---+---+---+
  |       District.              | A | B | C | D | E | F | G | H | I |
  +------------------------------+---+---+---+---+---+---+---+---+---+
  |Southeastern Tennessee        |   |  5|  5|  1|  3|  1|   |   |  9|
  |Western Tennessee             |   |  1|   |   |  1|   |   |   |   |
  |Savannah, Georgia             |  1|   |   |   |   |   |  7|   |  1|
  |Mississippi county, Arkansas  |   |   |   |   |   |   |   |  1|   |
  +------------------------------+---+---+---+---+---+---+---+---+---+

  KEY:
  A = Quartz.
  B = Sandstone.
  C = Argillite.
  D = Chalcedony.
  E = Limestone.
  F = Marble.
  G = Granite.
  H = Jasper conglomerate.
  I = Quartzite.

_D._ Like the last, except much smaller. Very few are polished over
the entire surface; some are rubbed more or less on the edges or
sides, but a majority have the edge rough as it was chipped or pecked
out; many have either the edge or sides in the natural state. From
those smoothly polished to those very rudely worked the gradation is
such that no dividing line can be drawn. This is true, also, of the
smaller specimens of other types. Some of the quartzite specimens are
very loose in texture. From seven-eighths to 2 inches in diameter and
one-fourth to three-fourths of an inch thick.

  +------------------------------+---+---+---+---+---+---+---+---+---+---+
  |  District.                   | A | B | C | D | E | F | G | H | I | J |
  +------------------------------+---+---+---+---+---+---+---+---+---+---+
  |Eastern Tennessee             |  1| 54| 64|   |   | 32|  1| 12|  4|   |
  |Bartow county, Georgia        |   |  1|   |  1|  1|  4|   |   |   |   |
  |Savannah, Georgia             |   |   |  2|   |   |   |   |   |   |   |
  |Kanawha valley, West Virginia |   |  7|   |   |   | 20|   |   |   |  1|
  |Northeastern Kentucky         |   | 14|   |   |   |   |   |  5|   |   |
  +------------------------------+---+---+---+---+---+---+---+---+---+---+

  KEY:
  A = Marble.
  B = Sandstone.
  C = Argillite.
  D = Granite.
  E = Red jasper.
  F = Quartzite.
  G = Micaceous sandstone.
  H = Limestone.
  I = Quartz.
  J = Cannel coal.

[Illustration: FIG. 102.--Discoidal stone, convex.]

_E._ Convex on both sides, edges straight. One of white quartz from
Caldwell county, North Carolina, has the sides much curved, making the
stone very thick in proportion to its width; there is a deep pit on
each side, the entire surface being highly polished. Diameter, 2 to 3½
inches; thickness, three-fourths to an inch and a half. Illustrated
by figure 102 (of porphyry, from a grave in Caldwell county, North
Carolina).

  +------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  |  District.       | A| B| C| D| E| F| G| H| I| J| K| L| M| N| O| P| Q| R| S|
  +------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  |Eastern Arkansas  | 3| 1| 1| 1| 4| 7|  | 1|  |  |  | 7| 1|  |  | 1|  |  |  |
  |Eastern Tennessee |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
  |  (many of these  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
  |  rough and       |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
  |  entirely        |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
  |  without         |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
  |  polish)         |  |  | 1|  |  |88|29|  | 1| 1|31|27| 8| 1| 1| 2|  |  |  |
  |Kanawha valley,   |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
  |  West Virginia   |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
  |  (rough)         |  |  |  |  |  | 1|  |  |  |  |  |  |  |  |  |  |  |  |  |
  |Savannah, Georgia |  |  |  |  |  | 1| 3|  |  |  |  |  |  |  |  |  |  |  |  |
  |Union county,     |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
  |  Mississippi     |  |  |  |  |  |  |  |  |  |  |  | 1|  |  |  |  |  |  |  |
  |Caldwell county,  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
  |  North Carolina  |  |  |  |  |  | 1|10|  |  |  |  | 4|  |  | 1| 2| 1| 2| 1|
  +------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

  KEY:
  A = Yellow jasper.
  B = Iron ore.
  C = Mica schist.
  D = Novaculite.
  E = Jasper conglomerate.
  F = Quartzite.
  G = Quartz.
  H = Hornblende.
  I = Marble.
  J = Clayey limestone.
  K = Argillite.
  L = Sandstone.
  M = Limestone.
  N = Sienite.
  O = Granite.
  P = Chalcedony.
  Q = Steatite.
  R = Black flint.
  S = Porphyry.

_F._ Same form as the above; 1¼ to 2 inches in diameter, one-half to
seven-eighths of an inch thick.

  +-------------------------------+---+---+---+---+---+---+---+---+---+---+
  |       District.               | A | B | C | D | E | F | G | H | I | J |
  +-------------------------------+---+---+---+---+---+---+---+---+---+---+
  |Elmore county, Alabama         |   |   |   |  2|  1|   |   |  1|   |  1|
  |Western North Carolina         |   |   |   |  1|   |   |  2|   |   |   |
  |Eastern Tennessee              |   |   |   |  2|   |  1|  9|   |  1|   |
  |Bartow county, Georgia         |  1|  1|  1|  2|   |   |   |   |   |   |
  |Savannah, Georgia              |   |   |   |  3|   |   |   |   |   |   |
  |Kanawha valley, West Virginia  |   |   |   |   |   |   |  4|   |   |   |
  |Drew county, Arkansas          |   |   |   |  1|   |   |   |   |   |   |
  +-------------------------------+---+---+---+---+---+---+---+---+---+---+

  KEY:
  A = Jasper.
  B = Mica schist.
  C = Micaceous sandstone.
  D = Quartzite.
  E = Quartz.
  F = Marble.
  G = Argillite.
  H = Sandstone.
  I = Limestone.
  J = Steatite.

[Illustration: FIG. 103.--Discoidal stone.]

_G._ Flat or slightly convex on one or both sides, edge straight, one
side wider than the other. Some have the edge battered or chipped and
it is always at the angle of the edge with the wider side. From 1⅝ to
3½ inches in diameter, and three-fourths to an inch and a half thick.
The specimen shown in figure 103 (of compact quartzite, from Bartow
county, Georgia) is typical. The material is quite diverse.

  +-------------------------------+---+---+---+---+---+---+---+---+---+---+---+
  |       District.               | A | B | C | D | E | F | G | H | I | J | K |
  +-------------------------------+---+---+---+---+---+---+---+---+---+---+---+
  |Eastern Tennessee              |  2|  1|  2|   |   |  2|   |  1|   |   |   |
  |Savannah, Georgia              |   |   |  1|  3|   |   |   |   |   |   |   |
  |Bartow county, Georgia         |   |   |   |   |   |   |  1|  1|   |   |   |
  |Kanawha valley, West Virginia  |  2|   |   |   |  1|   |   |   |   |   |   |
  |Caldwell county, North Carolina|   |   |   |   |  3|   |   |   |  1|  1|  2|
  |Mississippi county, Arkansas   |   |   |   |   |   |   |   |   |   |   |  1|
  +-------------------------------+---+---+---+---+---+---+---+---+---+---+---+

  KEY:
  A = Sandstone.
  B = Marble.
  C = Quartzite.
  D = Quartz hornblende.
  E = Granite.
  F = Quartz.
  G = Compact quartzite.
  H = Sienite.
  I = Chalcedony.
  J = Schist.
  K = Flint.

There are also of this type, one of very hard black stone (not
identified) from Red River county, Texas, three-fourths of an inch
in diameter; one of barite from Bartow county, Georgia, one inch in
diameter, three-fourths inch thick; and one of granite, from Chester
county, South Carolina, an inch in diameter. There are also one of
quartzite from Drew county, Arkansas, with a shallow pit on each side;
one of the same material from southeastern Tennessee, with a deep pit
gouged in smaller side; and from the same locality, three of quartzite,
one of quartz, and one of sandstone, each with a deep pit in the larger
side. All of these are small and none of them polished.

[Illustration: FIG. 104.--Discoidal stone.]

_H._ Convex sides and curved edges; size as in group _G_. The type
(figure 104) is of quartz, from Caldwell county, North Carolina.

  +--------------------------------+---+---+---+---+---+---+
  |       District.                | A | B | C | D | E | F |
  +--------------------------------+---+---+---+---+---+---+
  |Catahoula parish, Louisiana     |   |   |   |   |   |  1|
  |Eastern Tennessee               |   |  1|  2|  3|   |   |
  |Caldwell county, North Carolina |   |  2|   |   |  1|   |
  |Northeastern Arkansas           |  1|   |  1|   |   |   |
  +--------------------------------+---+---+---+---+---+---+

  KEY:
  A = Jasper conglomerate.
  B = Quartz.
  C = Limestone.
  D = Quartzite.
  E = Sandstone.
  F = Conglomerate.

_I._ Same form, rough and not polished; 1 to 2¾ inches in diameter,
one-half to 1 inch thick.

  +-------------------------------+---+---+---+---+---+---+
  |       District.               | A | B | C | D | E | F |
  +-------------------------------+---+---+---+---+---+---+
  |Eastern Tennessee              | 50|   |   |  3| 11| 10|
  |Northeastern Arkansas          |  1|   |  3|   |   |  3|
  |Caldwell county, North Carolina|   |   |   |   |   |  1|
  |Kanawha valley, West Virginia  | 36|  1|   |   |   |   |
  +-------------------------------+---+---+---+---+---+---+

  KEY:
  A = Quartzite.
  B = Flint.
  C = Yellow jasper.
  D = Argillite.
  E = Quartz.
  F = Sandstone.

_J._ Sides slightly convex, edge slightly curved; 2¼ to 3½ inches in
diameter, three-quarters to an inch and a half thick.

  +-------------------------------+---+---+---+---+---+---+---+---+
  |       District.               | A | B | C | D | E | F | G | H |
  +-------------------------------+---+---+---+---+---+---+---+---+
  |Kanawha valley, West           |  1|   |   |   |   |   |   |   |
  |  Virginia (evidently          |   |   |   |   |   |   |   |   |
  |  used for a hammerstone)      |   |   |   |   |   |   |   |   |
  |Eastern Tennessee              |  2|  3|  4|  1|  2|  1|   |   |
  |Lauderdale county, Tennessee   |   |   |  1|   |   |   |   |   |
  |Caldwell county, North Carolina|   |  2|   |   |   |   |  1|   |
  |Fulton county, Georgia         |   |   |   |   |   |   |   |  1|
  +-------------------------------+---+---+---+---+---+---+---+---+

  KEY:
  A = Sandstone.
  B = Quartz.
  C = Quartzite.
  D = Chalcedony.
  E = Argillite.
  F = Clayey limestone.
  G = Steatite.
  H = Sienite.

_K._ Sides flat; edges convex; roughly finished, no polish; 1⅛ to 2¼
inches in diameter, three-eighths to three-fourths of an inch thick.

  +-------------------------------+---+---+---+
  |       District.               | A | B | C |
  +-------------------------------+---+---+---+
  |Kanawha valley, West Virginia  |  1|   |  1|
  |Eastern Tennessee              |  4|  1|  7|
  +-------------------------------+---+---+---+

  KEY:
  A = Sandstone.
  B = Quartz.
  C = Quartzite.

_L._ Not polished; roughly chipped edges; 2 to 3½ inches in diameter.

  +-------------------------------+---+---+---+---+
  |       District.               | A | B | C | D |
  +-------------------------------+---+---+---+---+
  |Mississippi county, Arkansas   |  1|  1|  1|  3|
  |Bartow county, Georgia         |   |  1|   |   |
  |Union county, Mississippi      |  3|   |   |   |
  +-------------------------------+---+---+---+---+

  KEY:
  A = Sandstone.
  B = Quartzite.
  C = Chalcedony.
  D = Yellow jasper.

_M._ Edges V-shape; 1¾ to 2½ inches diameter, 1 to 1½ inches thick. The
type (figure 105) is of granite, from Randolph county, Illinois, with
insunk pecked sides and polished edge. A specimen from Kanawha valley,
West Virginia, is of flint, with only the edge worked; apparently a
hammer. One from Craighead county, Arkansas, has flat sides and the
entire surface polished; another from McMinn county, Tennessee, is also
polished entire. A good specimen from Cocke county, Tennessee, is of
flint, one side rubbed flat, the other a rounded cone, highly polished.

[Illustration: FIG. 105.--Discoidal stone, with V-shaped edges.]

_N._ Sides hollowed out; edges straight or slightly curved; very thick;
used as mortars, hammers, or pestles. This form gradually merges into
disk-shaped, pitted, or entire dressed hammers, which in turn run into
the ordinary hammerstones. The types are figures 106 (quartzite, from
Bradley county, Tennessee) and 107 (quartzite, from Nicholas county,
Kentucky). There are in this group from eastern Tennessee three of
quartzite, 2¼ by 4½ inches, 4¼ by 5¾ inches, and 1¾ by 3¼ inches, and
one of granite, 2¾ by 3 inches; from Caldwell county, North Carolina,
one of granite; and from Montgomery county, North Carolina, three of
quartzite. The last four are evidently hammers or pestles. In addition
there is a specimen from Jackson county, Illinois, of ferruginous
sandstone, 3 inches in diameter. On one side there is a pit and on the
other a shallow, mortar-like cavity extending entirely across.

[Illustration: FIG. 106.--Discoidal stone, used as mortar.]

[Illustration: FIG. 107.--Discoidal stone, probably used as hammer.]

_O._ One side flat, the other rounded; of convenient size for grasping.
In some the bottom is quite smooth. There is sometimes a pit in one or
both sides, more frequently in the bottom. They were used as mullers
or pestles; in the latter, either the side or the edge may have been
the pounding surface. The line between these implements and the
cylindrical, dome-topped pestles can not be drawn (see figure 91).

  +------------------------------+---+---+---+---+
  |       District.              | A | B | C | D |
  +------------------------------+---+---+---+---+
  |Eastern Tennessee             |  1|  2|   |   |
  |Southwestern Wisconsin        |  2|   |  1|  1|
  |Kanawha valley, West Virginia |  1|   |   |   |
  |Crittenden county, Arkansas   |  1|   |   |   |
  |Jackson county, North Carolina|  1|   |   |   |
  |Warren county, Ohio           |   |   |   |  1|
  |Savannah, Georgia             |  2|  1|  2|  8|
  +------------------------------+---+---+---+---+

  KEY:
  A = Quartzite.
  B = Quartz.
  C = Sandstone.
  D = Granite.

_P._ Sides flat; edge convex; same size and use as last.

  +------------------------------+---+---+---+---+
  |       District.              | A | B | C | D |
  +------------------------------+---+---+---+---+
  |Southeastern Tennessee        |   | 1 | 1 |   |
  |Kanawha valley, West Virginia | 3 |   | 5 |   |
  |Warren county, Ohio           |   |   |   | 1 |
  |Madison county, Alabama       |   |   | 1 |   |
  +------------------------------+---+---+---+---+

  KEY:
  A = Quartzite.
  B = Quartz.
  C = Sandstone.
  D = Granite.

_Q._ From southeastern Tennessee and northwestern Georgia there are
many disk-shape fragments of pottery, small, thin, and coarse, with
the edges roughly chipped; and from northeastern Kentucky there are
similar pieces, except that they have been fashioned from fragments of
limestone and sandstone. These specimens are illustrated by figure 108
(pottery, from a mound in Bartow county, Georgia).

[Illustration: FIG. 108.--Discoidal pottery fragment.]


SPUDS.

It has been a puzzle to archeologists to assign to any class the
peculiar stones called “spuds.” They are usually of a comparatively
soft material, carefully worked and polished, and bear no marks of
rough usage. On the other hand, they seem too large for ornament.
Perhaps their office may have been in some ceremony or game. Something
similar in form seems to be denoted in the following extracts:

Col. James Smith[81] says, speaking of the Indians of western
Pennsylvania, that as soon as the elm bark will strip in spring, the
squaws, after finding a tree that will do, cut it down, and with a
crooked stick, broad and sharp at the end, take the bark off the tree,
and of this bark make vessels. The Twana Indians, who formerly lived at
the south end of Hoods canal, Washington, in barking logs use a heavy
iron implement about 3 feet long, widened and sharpened at the end;[82]
and the tanbark workers of our day use an instrument of somewhat
similar form.

The ordinary spud is too weak to endure such usage, though it is
claimed by old people living in the Shenandoah valley, Virginia, that
in the last century the Indians in that locality used an implement of
this pattern for stripping the bark from trees. The implement may have
been used in dressing hides, the hole being for attachment of a handle.

[Illustration: FIG. 109.--Spud.]

A celt of argillite, highly polished, from Loudon county, Tennessee, of
the pattern shown in figure 64, has a neatly drilled cylindrical hole
about a third of the way from the top; but such cases are unusual. The
spuds may be divided into three general classes, as follows:

_A._ Blade circular in outline, including 180 degrees or more, or
semielliptical with either axis transverse; sides of stem straight or
slightly curved, parallel or slightly tapering to top, which is either
straight or slightly rounded; shoulder nearly at right angles to stem,
with sharp or rounded corners or sometimes barbed; stem and blade not
differing greatly in length. The type of the class, presented in figure
109, is of clay slate, from a mound in Monroe county, Tennessee. The
other six specimens in the collection were distributed as shown in the
table.

  +---------------------------+---+---+---+---+---+
  |  District.                | A | B | C | D | E |
  +---------------------------+---+---+---+---+---+
  |Western North Carolina     |  1|  1|   |   |  1|
  |Monroe county, Tennessee   |   |   |  1|  1|   |
  |Phillips county, Arkansas  |   |   |   |   |  1|
  |Pulaski county, Arkansas   |   |   |   |   |  1|
  +---------------------------+---+---+---+---+---+

  KEY:
  A = Green slate.
  B = Mica-schist.
  C = Compact quartzite.
  D = Clay slate.
  E = Quartzite.

_B._ Lower part of the blade a half circle or less; top square or
slightly rounded; stem rapidly widening, with increasing curve to the
blade, making an angle with it; stem and blade nearly the same length.
A specimen of green slate, from Mississippi county, Arkansas, is
illustrated in figure 110. Another, of compact quartzite, comes from
Loudon county, Tennessee.

[Illustration: FIG. 110.--Spud.]

_C._ Handle or stem round; very much longer than the blade, which
is semicircular or semielliptical, with square or barbed shoulders.
Illustrated in figure 111 (probably of chloritic slate, from Prairie
county, Arkansas).


PLUMMETS.

The specimens known as plummets vary considerably in form, size, and
degree of finish, indicating diversity of purpose, and different
writers have assigned to them various uses.

According to Abbott, one of these relics was found at Salem, in a
mortar.[83] Stevens says, quoting from Schoolcraft, that the Pennacook
Indians used sinkers very much like a plummet in shape.[84] In
Florida very rough plummets with deep grooves are found in the shell
mounds, which were no doubt used as sinkers. The Indians of southern
California use them as medicine stones to bring rain; the Eskimo use
similar stones as sinkers, but have them perforated at the end. The
larger objects of this form may have been used as pestles.[85] They
might be made very efficient in twisting thread, as they revolve for a
considerable time when set in motion.

[Illustration: FIG. 111.--Spud.]

The general form is ovoid, sometimes quite slender, sometimes almost
round; the ends may be either blunt or pointed. They may be grooved
near the middle or near either the larger or smaller end. Some have two
grooves, some are only partially grooved, while others have the groove
extending lengthwise. There are forms that differ somewhat from this
description, but such are rare.

[Illustration: FIG. 112.--Plummet, grooved near one end.]

[Illustration: FIG. 113.--Plummet, double-grooved.]

Many small and otherwise unworked waterworn pebbles and pieces of
steatite pots from southeastern Tennessee and from Montgomery county,
North Carolina, have grooves near the middle or near one end; they were
probably applied to some of the uses for which plummets were intended.

The plummets in the Bureau collection may be grouped as follows:

_A._ Grooved near smaller end. The types are illustrated in figure
112 (sandy limestone, from a mound in Catahoula parish, Louisiana),
and figure 113 (hematite, double grooved, with notches cut in various
places, from a mound in Kanawha valley, West Virginia). Other specimens
are, one from Arkansas county, Arkansas, of sandstone, and one each
from Brown and Randolph counties, Illinois, both of hematite.

_B._ Grooved near larger end. A good example, of hematite, is from
Kanawha valley, West Virginia, with a second groove partially around
the middle.

_C._ Grooved near the middle. The class is represented by a beautiful
specimen (figure 114) of hematite, with the groove much polished and
irregular, and a deep notch cut in one end, from Ross county, Ohio.
Another specimen, from Kanawha valley, West Virginia, is a double
conical implement of hematite, elliptical in section with both ends
ground off on flatter sides only.

[Illustration: FIG. 114.--Plummet, grooved near middle.]

[Illustration: FIG. 115.--Plummet, grooved lengthwise.]

_D._ Grooved lengthwise. This class includes a plummet of quartzite,
from Yellowstone park (figure 115), and another of hematite, much
shorter than the Yellowstone specimen and with blunt ends, from Kanawha
valley, West Virginia.

[Illustration: FIG. 116.--Plummet, grooveless, perforated.]

[Illustration: FIG. 117.--Plummet, double cone in shape.]

_E._ Grooveless. A good specimen (figure 116) is of quartz and mica,
elliptical in section, pointed at ends with one end perforated, from
Yellowstone park; another, from Randolph county, Illinois, of hematite,
rough, perhaps unfinished.

_F._ Double cone, with one end ground off flat and hollowed out. The
type (figure 117) is of granite, one of three from Savannah, Georgia.

_G._ Top flattened and hollowed out; sides incurving to the middle;
lower half a hemisphere. The class is represented by figure 118
(quartzite, from Randolph county, Illinois), and figure 119 (sandstone,
from Adams county, Ohio). From Kanawha valley there is one of hematite,
similar in form to the last.

[Illustration: FIG. 118.--Plummet.]

_H._ Ovoid, with the smaller end ground off flat.[86] A good specimen
of this class (figure 120) is of magnetite, from Caldwell county, North
Carolina. From Savannah, Georgia, there are two of sandstone, both
smaller than the type and rough; from Kanawha valley there is one of
quartzite, nearly half ground away, leaving almost a hemisphere; and
from eastern Tennessee there are one of magnetite and one of quartzite,
the latter nearly round.

_I._ Cylindrical. A unique specimen, from a mound in Loudon county,
Tennessee, is illustrated in figure 121. It is of sandstone; a short
cylinder with incurved sides, each end terminating in a blunt cone.

[Illustration: FIG. 119.--Plummet.]

[Illustration: FIG. 120.--Plummet, end ground flat.]

[Illustration: FIG. 121.--Plummet.]

Figure 122 represents a piece of smoothly dressed steatite from Desha
county, Arkansas, with a two-thirds round section, the ends rounded,
with a groove near one end, which may be classed with the plummets.
There are pieces of sandstone from the same locality which connect
this pattern with the simpler “boat-form” stones, except that the flat
side is ground smooth instead of being hollowed. This is only one of
numerous examples where the shapes of implements whose “typical forms”
seem utterly dissimilar merge into one another so gradually that no
line of demarkation can be drawn.

[Illustration: FIG. 122.--Plummet, cylindrical.]


CONES.

[Illustration: FIG. 123.--Cone.]

[Illustration: FIG. 124.--Cone.]

The relics known as “cones” have the base flat and the side curving
slightly; usually the curve extends regularly over the top, but
sometimes the apex is rubbed off flat. The conic surface may form
an angle with the base, or the line of junction may be rounded into
a curve. They vary considerably in thickness, some being nearly
flat, others having a height equal to the diameter of the base. One
of steatite from Savannah, as also one of sandstone from Kanawha
valley, has a slight pit or depression on the flat side. Among the
best examples are one (figure 123) of steatite from Bradley county,
Tennessee, and another (figure 124) of hematite from Loudon county, in
the same state; one (figure 125) of compact quartzite from a mound in
Ogle county, Illinois, and a fourth specimen (figure 126) of granite
from Kanawha valley, West Virginia. The distribution is as follows:

FIG. 125.--Cone.

FIG. 126.--Cone.

  +------------------------------+---+---+---+---+---+
  |     District.                | A | B | C | D | E |
  +------------------------------+---+---+---+---+---+
  |Eastern Tennessee             | 3 | 4 |   |   |   |
  |Ogle county, Illinois         |   |   | 1 |   |   |
  |Savannah, Georgia             | 1 |   |   |   |   |
  |Haywood county, North Carolina|   | 1 |   |   |   |
  |Kanawha valley, West Virginia |   | 1 |   | 1 | 1 |
  +------------------------------+---+---+---+---+---+

  KEY:
  A = Steatite.
  B = Hematite.
  C = Compact quartzite.
  D = Granite.
  E = Sandstone.


HEMISPHERES.

Hemispheric stones, like the cones, can receive a name only from the
form and not from any known or imagined use to which they could have
been applied.

All such specimens in the collection, except one, are from Kanawha
valley, and of hematite; many if not most of them have been ground
down from the nodule, and were probably paint stones originally; at
least, the material rubbed from them was used as paint while the maker
had their final form in view. One, however, has been pecked into shape
and is entirely without polish. In all, the base is flat and varies
in outline from almost a circle to a narrow ellipse. A section of the
stone parallel to either axis of the base varies from a little more
to a little less than a semicircle. Typical forms, both from Bracken
county, Kentucky, are illustrated in figure 127.

[Illustration: FIG. 127.--Hemispheres.]

The specimen, illustrated in figure 128 (yellow quartz, from a mound
in Kanawha valley) is intermediate between cones and hemispheres.
The sides are polished, while the flat bottom and rounded top are
roughened. As it has faint red stains, it may have been used as a
paint-muller.

[Illustration: FIG. 128.--Hemisphere.]


PAINT STONES.

The articles known as paint stones scarcely come under the head
of implements. Some of the hematite pieces are incipient celts,
hemispheres, or cones; but most of them were used merely to furnish
paint, at any rate until rubbed down quite small. They are of every
degree of firmness, some being as brittle as dry clay, others like
iron. Most pieces in the collection are from Kanawha valley, but others
are from southeastern Tennessee, northeastern Arkansas, and Caldwell
county, North Carolina. From the last-named section, as well as from
Chester county, South Carolina, and McMinn county, Tennessee, come
pieces of graphite more or less rubbed; and one has been sent in from
Elmore county, Alabama.

[Illustration: FIG. 129.--Paint stone.]

The specimen illustrated in figure 129, from a mound, is a good example
of the manner in which the harder hematite was ground.


CEREMONIAL STONES.

FUNCTIONS AND PURPOSES.

The so-called “ceremonial stones” are variously subdivided and named by
different writers. They are supposed to have been devoted to religious,
superstitious, medical, emblematic, or ceremonial purposes; to be
badges of authority, insignia of rank, tokens of valorous deeds, or
perhaps some sort of heraldic device; in short, the uses to which they
might, in their different forms, be assigned, are limited only by the
imagination.

According to Nilsson the ancient Scandinavians wore “victory stones”
suspended around their necks,[87] and the Eskimo wear charms and
amulets to bring success in fishing and hunting.[88] Adair (1775)
says that the American Archi-magus wore a breastplate made of a white
conch-shell, with two holes bored in the middle of it, through which
he put the ends of an otter-skin strap and fastened a buck-horn button
to the outside of each.[89] An explanation of the purpose of many of
the smaller perforated stones also may be found in Nilsson’s remark[90]
that the small ovoid or ellipsoid ones were used as buttons; a string
being tied to the robe at one end, run through the hole and tied in a
knot.

The various Indians of Guiana in their leisure hours often fashion
highly ornamental weapons and implements which they never use except
ceremonially, but keep proudly at home for show.[91]

So, too, the Yurok and Hupa Indians of California, as well as some
of the tribes of Oregon, have very large spearheads or knives, which
are not designed for use, but only to be produced on the occasion of
a great dance. The larger weapons are wrapped in skin to protect the
hand; the smaller ones are glued to a handle. Some are said to be 15
inches long.[92] The Oregon Indians believed the possession of a large
obsidian knife brought long life and prosperity to the tribe owning
it.[93]

Some of the wild tribes of the interior have something which they
regard as the Jews did the Ark of the Covenant. Sometimes it is known;
again it is kept secret. The Cheyenne had a bundle of arrows; the Ute
a little stone image, and the Osage a similar stone.[94] The Kiowa had
a carved wooden image, representing a human face; the Ute captured it,
and the Kiowa offered very great rewards for its return; but the Ute,
believing the Kiowa powerless to harm them so long as it was retained,
refused to give it up.[95]

The North Carolina Indians, when they went to war, carried with
them their idol, of which they told incredible stories and asked
counsel;[96] and as a token of rank or authority, the Virginia Indians
suspended on their breasts, by a string of beads about their neck, a
square plate of copper.[97] These were worn as badges of authority.
The native tribes, from our first acquaintance with them, evinced a
fondness for insignia of this kind.[98]

Simply for convenience the ceremonial stones in the Bureau collection
will here be divided into two general classes. The first, comprising
those pierced through the shortest diameter, will be called gorgets,
which name, like that of celt, has no particular meaning, but is in
common use. The second class will comprise all others, which will have
some name that may or may not be suitable to their form, but by which
they are usually called. In this class are included boat-shape stones,
banner stones, picks, spool-shape ornaments, and bird-shape stones, as
well as engraved tablets or stones.[99]


GORGETS.

The relics commonly called gorgets have been found in Europe; they may
be convex on one side, concave on the other, and are supposed to be
for bracers.[100] It is said that the Miami Indians wore similar plates
of stone to protect their wrists from the bowstring.[101] Herndon and
Gibbon remark that a gold ornament in shape like a gorget, but not
pierced, is worn on the forehead by some of the Amazon Indians.[102]
According to Schoolcraft the so-called gorgets were sometimes used as
twine-twisters;[103] but Abbott holds that while some may have been
twine-twisters, or may have been used for condensing sinews or evening
bowstrings (that is, reducing the strings to a uniform diameter), most
were simply ornaments, as they are generally found on the breast of
a buried body.[104] Stevens is even more conservative, holding that
they were neither twine-twisters nor devices for condensing sinews or
evening bowstrings, as they show no marks of wear in the holes.[105]

Some writers suppose the gorgets to have been shuttles; but this
supposition can hardly be entertained, although it is true, according
to Chase, that the Oregon Indians passed thread with a curved bone
needle.[106] As twine-twisters they would be about as awkward as
anything that could be devised. As to evening bowstrings, it would seem
that if a string were too large in places to pass through a hole it
could not be pulled through; pounding and rolling the wet string with
a smooth stone, or some such means, would be the remedy. The bracer
theory is plausible; but no one seems ever to have seen a gorget used
for this purpose.

Few of the gorgets in the Bureau collection show such marks of wear
around the edges of the hole as would be made by a cord; but the
majority are thus worn at the middle, where the hole is smallest. Some
specimens among every lot are not perforated, or only partially so;
the drilling seems to have been the last stage of the work. The hole
is almost always drilled from both sides, and the few in which it goes
entirely through from one side would probably have had it enlarged
later from the other. A number are fragments of larger gorgets, the
pieces having been redrilled.

Some of the specimens have various notches and incised lines, the
latter being sometimes in tolerably regular order; but there is not the
slightest indication that these marks had any meaning or were intended
for any other purpose than to add to the ornamental appearance of the
stone.

If they were to be worn at the belt or on any part of the dress they
could easily have been fastened by a knotted string, or if the wearer
desired he could have an ornamental button of some kind. If suspended
around the neck, in order to make them lie flat against the breast they
probably had a short cord passed through the perforation and tied
above the top of the object, the suspending cord being passed through
the loop thus formed.

[Illustration: FIG. 130.--Gorget.]

The principal division is into group _A_ with one hole and group _B_
with two holes, though in many cases this forms the only difference
between two specimens.

_A._ General outline rectangular, or perhaps slightly elliptical,
sometimes with one end somewhat narrower than the other, or with one
end rounded off, or with the corners slightly rounded. Perforation
commonly near one end. The form is represented by the specimen with two
perforations illustrated in figure 133, which otherwise fully answers
the description. The argillite specimens have the broader ends striated
as though used for rubbing or scraping, but in other respects conform
to those of other materials. The materials are generally the softer
rocks, as shown in the accompanying table:

  +-----------------------------+---+---+---+---+---+
  |     District.               | A | B | C | D | E |
  +-----------------------------+---+---+---+---+---+
  |Eastern Tennessee            | 2 | 3 | 2 |   | 3 |
  |Wilkes county, North Carolina|   |   |   | 1 |   |
  |Knox county, Ohio            |   | 1 |   |   |   |
  |Kanawha valley, West Virginia|   | 7 | 2 |   |   |
  +-----------------------------+---+---+---+---+---+

  KEY:
  A = Steatite.
  B = Slate.
  C = Sandstone.
  D = Schist.
  E = Argillite.

A related type is rectangular or with incurved sides (forming either a
regular or broken curve) and rounded ends, and differs in having the
perforation near the center. The same pattern sometimes has two holes.
It is illustrated in figure 130 (striped slate, from a mound in Kanawha
valley, West Virginia). There are also from the same place one each of
slate, cannel coal, and clay slate, and from eastern Tennessee one each
of slate, shale, and clay slate.

[Illustration: FIG. 131.--Gorget(?).]

There are a number of small pebbles, thin and flat, with a hole
drilled near the edge, from southeastern Tennessee, North Carolina,
and southeastern Arkansas. One of these, from Caldwell county,
North Carolina, is of banded slate; the others are of clay slate or
sandstone. Two of them have straight and zigzag lines on both faces,
and notches around the edge.

Allied to these are a number of pieces of flat stone from southeastern
Tennessee, Kanawha valley, and North Carolina, with the faces partially
rubbed down smooth, the edges being untouched. They are of slate, talc,
or argillite.

From southeastern Tennessee and North Carolina there are several
pieces of steatite, which may have been for sinkers. Some have a hole
near one end, others a hole at each end, while still others are not
perforated. All have been worked over the entire surface, and some of
them are well polished. One of these is represented in figure 131.

_B._ Gorgets with two holes. Of these there are several subdivisions,
differing more or less widely in form. They are as follows:

1. Thick, with both the sides and the ends incurved or reel-shape;
faces flat or slightly convex. This form is represented by the specimen
shown in figure 132, from a mound, Knox county, Ohio. There is another
from the same place, a third from Kanawha valley, and a fourth from
Butler county, Ohio; all of green slate.

[Illustration: FIG. 132.--Gorget, reel-shape.]

2. Rectangular, or with sides or ends, or both, slightly curved, either
convex or concave; faces flat. Shown in figure 133 (green slate, from a
grave in Kanawha valley, West Virginia).

  +-----------------------------+---+---+---+---+---+---+
  |     District.               | A | B | C | D | E | F |
  +-----------------------------+---+---+---+---+---+---+
  |Nicholas county, Kentucky,   |   |  1|   |   |   |   |
  |   with ends V-shaped        |   |   |   |   |   |   |
  |Kanawha valley, West Virginia| 11|  3|  3|   |   |   |
  |Eastern Tennessee            |  6|  1|  1|  1|   |   |
  |Ogle county, Illinois        |  1|   |   |   |   |   |
  |Forsyth county, Georgia      |   |   |   |   |   | 1 |
  |Haywood county, N.C.         |   |   |   |   |  1|   |
  |Davidson county, N.C.        |   |   |   |   |   | 1 |
  |Chautauqua county, N.Y.      |  1|   |   |   |   |   |
  +-----------------------------+---+---+---+---+---+---+

  KEY:
  A = Slate.
  B = Limestone.
  C = Sandstone.
  D = Shale.
  E = Argillite.
  F = Fine quartzite.

[Illustration: FIG. 133.--Gorget.]

3. Widest at middle, with single or double curve from end to end; very
thin; both sides flat.

  +--------------------------------+---+---+---+
  |     District.                  | A | B | C |
  +--------------------------------+---+---+---+
  |Kanawha valley, West Virginia   | 1 | 4 |   |
  |Davidson county, North Carolina | 1 |   |   |
  |Savannah, Georgia               |   |   | 1 |
  |Eastern Tennessee               | 5 |   | 1 |
  +--------------------------------+---+---+---+

  KEY:
  A = Slate.
  B = Sandstone.
  C = Schist.

4. Same outline but thicker; one face flat, the other convex.
Represented by figure 134 (shale, from Jackson county, Illinois). The
distribution of the form is as follows:

  +-------------------------------+---+---+---+---+---+---+---+
  |      District.                | A | B | C | D | E | F | G |
  +-------------------------------+---+---+---+---+---+---+---+
  |Eastern Tennessee              |   |  2|   |  3|  1|  1|   |
  |Haywood county, North Carolina |   |   |  1|  2|   |   |   |
  |Davidson county, North Carolina|   |  1|   |   |   |   |   |
  |Savannah, Georgia              |   |   |  2|  2|   |   |   |
  |Kanawha valley, West Virginia  |  1|   |   |   |   |   |   |
  |Jackson county, Illinois       |   |   |   |   |   |   |  1|
  |Desha county, Arkansas         |  1|   |   |  1|   |   |   |
  +-------------------------------+---+---+---+---+---+---+---+

  A = Sandstone.
  B = Slate.
  C = Schist.
  D = Steatite.
  E = Talc.
  F = Argillite.
  G = Shale.

[Illustration: FIG. 134.--Gorget.]

5. Same outline, but quite thick, approaching the “boat-shape” stones
in form. In some the flat side is slightly hollowed out. A majority of
them are not perforated. The type (figure 135) is of sandstone, from a
mound at Adelphi, Ohio.

There are also, from Butler county, Ohio, Kanawha valley, West
Virginia, and Savannah, Georgia, one each of slate; from Ross county,
Ohio, two, and from Kanawha valley, and Cocke county, Tennessee, one
each, all of sandstone. There are two (of sandstone and slate) from
Kanawha valley, which differ from the others in having the sides
parallel, giving them a semicylindrical form.

The pattern of the specimen illustrated in figure 136 (striped slate,
from Butler county, Ohio, of which a number have been found in
that state), may be classed between the gorgets and the boat-shape
stones. The shorter end of the object has, sometimes, a projection
or enlargement at the top, apparently for suspension, although no
perforated examples have been found.


BANNER STONES.

Under the head of “banner stones” are placed ornaments having the
ends at right angles to the perforation. The hole is drilled in a
midrib, from which the faces slope by either straight or curved lines
to the edges. The two halves of the stone are symmetrical. In most
specimens one face is flatter than the other, even plane in some cases.
Some specimens are finished to a high polish, before the hole is
started; others have the hole completed with the exterior more or less
unfinished. The specimens in the Bureau collection may be classified as
follows:

_A._ Rectangular or trapezoidal, with sides and ends sometimes
slightly curved inward or outward.

_B._ Reel-shape.

_C._ Crescentic.

_D._ Butterfly pattern.

[Illustration: FIG. 135.--Gorget, boat-shape.]

[Illustration: FIG. 136.--Gorget resembling boat-shape stone.]

The last three varieties may be considered as only modifications of the
simple rectangular banner stones. By rounding off the corners of the
articles or dressing them to sharp points, by cutting away portions
from the sides or by trimming away the central portions at either
or both ends of the perforations, all these different forms may be
produced.

[Illustration: FIG. 137.--Banner stone.]

[Illustration: FIG. 138.--Banner stone.]

_A._ A typical specimen is illustrated in figure 137. It is of slate,
and was taken from a mound in Kanawha valley, West Virginia. Another
good example, shown in figure 138, is of sandy slate, from a grave in
Monroe county, Tennessee. The geographic range of this type is wide,
though the objects are not abundant.

  +----------------------------------+---+---+---+---+---+---+
  |      District.                   | A | B | C | D | E | F |
  +----------------------------------+---+---+---+---+---+---+
  |Montgomery county,  North Carolina|  1|  1|   |   |   |   |
  |Kanawha valley, West Virginia     |   |   |  2|   |   |   |
  |Hancock county, Illinois          |  1|   |   |   |   |   |
  |Savannah, Georgia                 |  1|  3|   |  1|  1|   |
  |Eastern Tennessee                 |   |   |  2|  1|  1|  1|
  +----------------------------------+---+---+---+---+---+---+

  KEY:
  A = Granite.
  B = Steatite.
  C = Slate.
  D = Sandstone.
  E = Compact quartzite.
  F = Diorite.

_B._ The reel-shape banner stones are somewhat variable, but are fairly
illustrated in figure 139, representing a specimen of argillite from
Sevier county, Tennessee.

A related form has the middle cut from one end, leaving two horn-like
projections extending parallel with the hole. An example of this form,
shown in figure 140, is of banded slate, from a mound in Kanawha
valley, West Virginia.

[Illustration: FIG. 139.--Banner stone, reel-shape.]

[Illustration: FIG. 140.--Banner stone, with horn-like projections.]

[Illustration: FIG. 141.--Banner stone, crescent-shape.]

[Illustration: FIG. 142.--Banner stone, crescent-shape]

_C._ The crescentic banner stones might better be termed “semilunar,”
since most of them are flat at one end and curved at the other.
Occasionally one has both ends curved and parallel, the sides also
slightly curved, making the article reniform. Others have the ends
straight and parallel, with the sides curved or like the zone of a
circle. Two have a midrib for the hole, with the sides dressed down
quite thin, as with the butterfly gorgets. All were finished in form
before the drilling was done, though some had not received their
final polish. The type is illustrated in figures 141 (steatite,
from northwestern North Carolina), 142 (pagodite, from Rhea county,
Tennessee), and 143 (sandstone, from Jefferson county, Tennessee). The
last form is sometimes called a perforated ax, but the material and
fragile make exclude it from every class except the ceremonial stones.

  +---------------------------------+---+---+---+---+---+---+
  |     District.                   | A | B | C | D | E | F |
  +---------------------------------+---+---+---+---+---+---+
  |Savannah, Georgia                | 1 |   | 1 | 1 |   |   |
  |Western North Carolina           | 2 |   |   |   | 1 |   |
  |Montgomery county, North Carolina| 1 |   |   |   |   |   |
  |Kanawha valley, West Virginia    |   |   |   |   |   | 2 |
  |Eastern Tennessee                |   | 1 |   |   | 2 |   |
  +---------------------------------+---+---+---+---+---+---+

  KEY:
  A = Steatite.
  B = Slate.
  C = Granite.
  D = Reddle.
  E = Pagodite.
  F = Talc.

_D._ The “butterfly” gorgets are so named from their resemblance to a
butterfly with expanded wings. The sides or wings are usually quite
thin, either semicircular or like a spherical triangle in outline. The
perforated mid-rib is shorter than the wings and carefully worked.
A good example, shown in figure 144, is of ferruginous quartz from
Monongahela, Pennsylvania, and that illustrated in figure 145 is of
banded slate from Kanawha valley. There is also one of the latter
material from Lewis county, Kentucky.

[Illustration: FIG. 143.--Banner stone, crescent-shape.]

[Illustration: FIG. 144.--Butterfly banner stone.]

[Illustration: FIG. 145.--Butterfly banner stone.]

[Illustration: FIG. 146.--Banner stone.]

An aberrant form is elliptical in section at the middle, round or
nearly so at the ends, the sides expanding rapidly from end to middle
by double curves. It is represented by figure 146 (ferruginous quartz,
from Kanawha valley, West Virginia), and by a specimen of quartzite
from Union county, Mississippi.


BOAT-SHAPE STONES.

There are two types of relics, perhaps ceremonial, for which no use has
been determined, and which are named from their general resemblance to
the form of a boat. They are as follows:[107]

_A._ With flat face more or less hollowed, sides triangular and
parallel. A number are not perforated. The type is shown in figure 147
(striped slate, from Davidson county, North Carolina).

  +--------------------------------+---+---+---+---+---+---+
  |     District.                  | A | B | C | D | E | F |
  +--------------------------------+---+---+---+---+---+---+
  |Davidson county, North Carolina |   |  1|   |   |   |   |
  |Southeastern Arkansas           |  1|   |  2|  1|   |   |
  |Savannah, Georgia               |   |   |   |   |   |  1|
  |Eastern Tennessee               |   |   |  1|   |  1|  1|
  +--------------------------------+---+---+---+---+---+---+

  KEY:
  A = Compact quartzite.
  B = Slate.
  C = Sandstone.
  D = Porphyry.
  E = Barite.
  F = Steatite.

[Illustration: FIG. 147.--Boat-shape stone.]

[Illustration: FIG. 148.--Boat-shape stone.]

_B._ Coming to a point at each end; flat side, deeply hollowed;
perforations near the ends, with a groove between them in which the
suspending cord rested. Some have a flattened projection in which the
groove is made. The type (figure 148) is of steatite, from a grave in
Sullivan county, Tennessee. The distribution is as follows:

  +------------------------+---+---+
  |     District.          | A | B |
  +------------------------+---+---+
  |Central North Carolina  |  3|   |
  |Eastern Tennessee       |  2|  1|
  |Savannah, Georgia       |   |  1|
  +------------------------+---+---+

  KEY:
  A = Steatite.
  B = Slate.


PICKS.

[Illustration: FIG. 149.--Pendant.]

[Illustration: FIG. 150.--Pick.]

The relics known as picks from their form and not at all from their
function vary considerably in size. Not all are perforated. A good
example, shown in figure 150, is of striped slate, from Knox county,
Ohio. There are also in the collection, from Union county, Mississippi,
one specimen of greenstone; from Jackson county, North Carolina, one of
slate, and from Montgomery county, North Carolina, one each of steatite
and slate. The last named is the half of a larger one that was broken
at the part drilled, and has had a hole drilled near the larger end of
this fragment, which has not been reworked.


SPOOL-SHAPE ORNAMENTS.

[Illustration: FIG. 151.--Spool-shape ornament.]

Relics of spool shape, probably ornamental rather than industrially
useful, are not uncommon in copper, though very rare in stone. The
specimen shown in figure 151 is of sandstone, from Jackson county,
Arkansas. There are also, from Prairie and Lonoke counties, one each of
sandstone, and from Jackson county two of the same material; from Clark
county there is one of pinkish slate, with the stem drilled between and
parallel to the faces, the others with stems drilled lengthwise.


BIRD-SHAPE STONES.

Stone relics of bird form are quite common north of the Ohio river,
but are exceedingly rare south of that stream. A good example, shown
in figure 152, is of granite, from Vernon county, Wisconsin, and the
collection embraces another specimen, of sandstone, from Kanawha
valley, West Virginia.

[Illustration: FIG. 152.--Bird-shape stone.]

According to Gillman, bird-shape stones were worn on the head by the
Indian women, but only after marriage.[108] Abbott[109] quotes Col.
Charles Whittlesey to the effect that they were worn by Indian women
to denote pregnancy, and from William Penn that when squaws were ready
to marry they wore something on their heads to indicate the fact.
Jones[110] quotes from De Bry that the conjurers among the Virginia
Indians wore a small, black bird above one of their ears as a badge of
their office.


SHAFT RUBBERS.

The shaft of an arrow is straightened by wetting and immersing it in
hot sand and ashes, and bringing into shape by the hand and eye. To
reduce the short crooks and knobs it is drawn between two rough grit
stones, each of which has a slight groove in it; coarse sand is also
used to increase the friction.[111]

Again, a rock has a groove cut into it as wide as the shaft and two or
three times as deep. Into this the crooked part of the shaft is forced,
and by heating or steaming becomes flexible and can be easily made
straight, which shape it will retain when dry.[112]

A somewhat different device for the same purpose appears in the Bureau
collection. It is illustrated in figure 153 (of fine sandstone); there
was another part to correspond with that shown. The specimen is from
Monongahela, Pennsylvania.


TUBES.

As the use of stone tubes by the Indians has given rise to considerable
discussion, the following references to the various ways in which they
have been employed may help to settle it.

Schoolcraft observed that the Dakota Indians used a horn tube in
bleeding; one end was set over the cut, and the other vigorously
sucked.[113] Powers says that the Klamath Indians use tubes for
smoking,[114] while H. H. Bancroft says that the Acaxees of Mexico
employ “blowing through a hollow tube” for the cure of disease,[115]
and also that the Indians of southern California inhale smoke of
certain herbs through a tube to produce intoxication.[116] According
to C. C. Jones the Florida and Virginia Indians used reeds in treating
diseases by sucking or blowing through them, and also used them in
cauterizing; and he observes that the Indians of Lower California
employed similar processes, using stone tubes[117] instead of reeds.
Hoffman illustrates the removal of disease through the agency of a tube
of bone by a Jĕs´sakīd´ or medicine-man of the Ojibwa.[118] Read calls
attention to the fact that the old Spanish writers describe a forked
wooden tube, the prongs being inserted in the nostrils, while the other
end was held over smoldering herbs, and suggests that the Indians may
have used stone tubes in the same way.[119]

[Illustration: FIG. 153.--Shaft rubber.]

The Indian mode of inhaling smoke would produce the same result,
whether drawn through the mouth or into the nostrils.

The use of stone tubes for astronomical purposes, which has been
discovered by some imaginative writers, is, of course, absurd;
nevertheless they are useful in viewing distant objects on a bright
day, especially when looking toward the sun.

Nearly all of the tubes made of soft material with tapering perforation
seem to have been gouged rather than drilled. Schumacher observes that
the California Indians drilled their tubes from both ends and enlarged
the hole from one end by scraping, the mouthpiece being made of a bird
bone stuck on with asphaltum.[120]

There are five classes of stone tubes in the collection of the Bureau,
as follows:

_A._ One end flattened and expanding into a wing on either side.
This class is illustrated by figure 154 (from Kanawha valley, West
Virginia). The corners of this specimen have been trimmed off; the
typical form is indicated by the dotted lines. There are also from the
same locality one of quartzite, and from Ross county, Ohio, one of
sandstone.

_B._ Conical; the bore more tapering than the exterior. Represented by
the specimen shown in figure 155, of sandstone, from a mound in Kanawha
valley, West Virginia.

  +------------------------------+---+---+---+---+
  |          District.           | A | B | C | D |
  +------------------------------+---+---+---+---+
  |Sevier county, Tennessee      |  1|   |   |   |
  |Savannah, Georgia             |   |  1|   |   |
  |Western North Carolina        |   |  1|  1|   |
  |Kanawha valley, West Virginia |  2|   |   |  1|
  +------------------------------+---+---+---+---+

  KEY:
  A = Sandstone.
  B = Steatite.
  C = Slate.
  D = Clay slate.

_C._ Hour-glass shape, usually but not always with a narrow ring or
projection around the smallest part. Exterior with gently curving
outlines; the perforation is usually in the form of a double cone, with
the points at the smallest part of the tube, which may or may not be
midway between the ends. A good specimen, illustrated in figure 156, is
of steatite, from Sevier county, Tennessee.

_D._ Of nearly uniform diameter inside and out; section circular,
elliptical, or flattened on one side. This form is exemplified by
figure 157, a specimen from North Carolina. There are also one each
from Caldwell, Haywood, and Montgomery counties, North Carolina, all of
slate.

[Illustration: FIG. 154.--Tube, one end flattened.]

[Illustration: FIG. 155.--Tube, conical.]

_E._ Round or elliptical in section, ¾ to 2½ inches long; probably
beads. The collection includes specimens from Bradley county,
Tennessee, of steatite; from Savannah, Georgia, of ferruginous
sandstone; and from Union county, Mississippi, of jasper.


PIPES.

So much has been written concerning pipes that few references seem
necessary, and none will be given except from Col. R. I. Dodge, who,
after an experience of many years among the Plains Indians, says
that the latter have different pipes for different occasions, as the
medicine pipe, peace pipe, council pipe, and a pipe for common use.
Each is sacred to its own purpose.[121]

[Illustration: FIG. 156.--Tube, hour-glass form.]

In an article so highly prized by its owner, great pains would be
expended to give an ornamental appearance to one which would be used
on important ceremonial occasions; and it would be carved or worked in
a manner gratifying to its maker or the one for whom it was intended.
This fact, and the statement quoted above, will explain the great
variety in form from a limited area. Still, in some sections of the
country there are certain types that prevail, and may be in some cases
peculiar to these localities; such, for instance, are the long stemmed
pipes from western North Carolina and eastern Tennessee.

In many pipes of soft stone the bowl is gouged out instead of drilled.

[Illustration: FIG. 157.--Tube, cylindrical.]

The pipes in the Bureau collection embrace the following classes:

_A._ Stem with an elliptical or somewhat triangular section; the bowl
near one end, leaving a projection in front; stem hole in long end. The
form is shown in figure 158. From Caldwell county, North Carolina there
are two similar pipes of steatite. Another, from Preston county, West
Virginia, differs only in having the stem hole in the short end.

[Illustration: FIG. 158.--Pipe, flat base.]

_B._ Same form of stem; no projection in front, the bottom of the
stem curving up gradually into the front of the bowl. This type is
represented by figure 159 (of steatite, from a mound in Loudon county,
Tennessee). There are also, from Kanawha valley, West Virginia, an
example of talcose slate, and from Caldwell county, North Carolina, one
of steatite.

_C._ Stem having a midrib in which the hole is bored. One of steatite,
from Caldwell county, North Carolina, has a prow; the others have
not. Another of steatite from Loudon county, Tennessee, has a slender
projection below the bowl, as if for a handle. The axis of the
bowl and that of the stem meet at any angle between 100° and 170°.
Figure 160 represents a typical specimen, of steatite, from a mound
in Sullivan county, Tennessee. There are also, from Caldwell county,
North Carolina, and Kanawha and Preston counties, West Virginia, one
each, and from Sullivan county, Tennessee, two, all of steatite; and
there is an example from Kanawha valley, West Virginia, of material not
identified.

[Illustration: FIG. 159.--Pipe.]

[Illustration: FIG. 160.--Pipe.]

_D._ With bowls and stems either round or square; very large. A good
example (figure 161) is of red sandstone, from southeastern Missouri;
it is the only pipe in the entire collection of the Bureau on which is
shown any attempt at ornamentation. From Jefferson county, Tennessee,
and Savannah, Georgia, there are one each, of steatite.

[Illustration: FIG. 161.--Pipe, ornamented.]

[Illustration: FIG. 162.--Pipe.]

_E._ Cylindrical bowl, with a square-edged groove around it near the
middle, below which the bottom has a somewhat celt like form, with stem
hole in one side. A small hole is drilled near the edge at the bottom,
probably for the purpose of suspending feathers or other ornaments. The
type is represented by figure 162 (of limestone, from Crawford county,
Wisconsin). Pipes of the same form are found also in central Ohio.

[Illustration: FIG. 163.--Pipe, long-stemmed.]

_F._ Round stem from one-half inch to 10 inches long; bowl at extreme
end, set on at various angles from nearly a right angle to almost a
straight line. Good examples are illustrated in figure 163 (steatite,
from Caldwell county, North Carolina) and 164 (also of steatite, from
a mound in Monroe county, Tennessee). The other specimens in the
collection are distributed as shown in the table:

  +--------------------------------+---+---+
  |    District.                   | A | B |
  +--------------------------------+---+---+
  |Eastern Tennessee               |  4|  7|
  |Caldwell county, North Carolina |   | 22|
  |Chester county, South Carolina  |   |  1|
  +--------------------------------+---+---+

  KEY:
  A = Sandstone.
  B = Steatite.

[Illustration: FIG. 164.--Pipe, short-stemmed.]

_G._ Same form of stem, short, with flange around the top of the
bowl. Represented by one of sandstone, from a mound in Monroe county,
Tennessee (figure 165), and three of sandstone and two of marble from
eastern Tennessee.

[Illustration: FIG. 165.--Pipe.]

[Illustration: FIG. 166.--Pipe.]

_H._ Small, stem more or less squared, bowl upright. There are two
examples of this class from Monroe county, Tennessee, each having a
flat projection or ridge on top of the stem, which is perforated for
attachment of ornaments. The type, represented in figure 166, is of
clay slate, from Monroe county, Tennessee. It will appear from the
following table that the distribution of this form is limited:

  +-----------------------+---+---+---+
  |District.              | A | B | C |
  +-----------------------+---+---+---+
  |Savannah, Georgia      |  1|   |   |
  |Eastern Tennessee      |  1|  1|  2|
  |Western North Carolina |   |   |  3|
  +-----------------------+---+---+---+

  KEY:
  A = Sandstone.
  B = Clay slate.
  C = Steatite.

_I._ Egg-shape bowl, stem hole in the side. One from Bradley county,
Tennessee, of argillaceous limestone, has a hole drilled from end
to end, but no stem hole. It may have been made so intentionally,
or the drilling may have been carried too far and the specimen left
unfinished. The type is of barite, from Sevier county, Tennessee (shown
in figure 167). Another specimen, from McMinn county, Tennessee, is of
argillaceous limestone.

[Illustration: FIG. 167.--Pipe.]

_J._ Form like last, with a flange around the top of the bowl. A
typical specimen, shown in figure 168, is of steatite, from Loudon
county, Tennessee. There are, also, from Preston county, West Virginia,
one of sandstone, and from Caldwell county, North Carolina, two of
steatite.

_K._ Bowls egg-shape, but quite long and sometimes rather pointed at
the bottom; stem hole in the side. This class includes the following:
From Savannah, Georgia; Roane county, Tennessee; and Adams county,
Ohio, one each of sandstone; from Holt county, Missouri, one of
micaceous sandstone; from Kanawha valley, West Virginia, one of
indurated red clay, possibly catlinite; and from Caldwell county, North
Carolina, three of steatite.

[Illustration: FIG. 168.--Pipe.]


CHIPPED STONE ARTICLES.

MATERIALS AND MANUFACTURE.

The chipped implements in the Bureau collection, are nearly always made
of some form of flint or similar chalcedonic rock, as it is easily
chipped and can be brought to a keen edge or point. Sometimes quartz,
quartzite, argillite, or even a more granular rock is used; but this is
infrequent, and is due to the scarcity of the more desirable material.

In the spades and hoes first to be considered the flaking seems to have
been by percussion mainly, if not entirely; the same method appears to
have been employed in obtaining flakes from blocks, to work into the
smaller implements. Some of the processes used in making them will be
hereinafter described.


SPADES.

It must be admitted that most Indians depended largely on agriculture
for subsistence; some historical works that represent them as barbarous
hunters, depending entirely on the chase, will, on the same page
perhaps, relate how Virginia and New England pioneers were saved from
starvation by supplies of corn, beans, and pumpkins obtained from the
Indians. This being the case, some method of cultivation was necessary.

It is not to be inferred that “cultivation” implies all that is now
meant by the term; the Indian seems merely to have worked the hill in
which his corn was planted and not the whole surface of the field, a
shallow hole being scooped out in which the grain was dropped, and as
the stalk became larger the dirt was heaped up around it. The remains
of many “Indian old fields” in various parts of the country show this,
there being no long ridges as in cornfields of the present day, but
only a great number of these detached hills. The great scarcity of
implements suitable for such work argues nothing, for in most parts
of the country stone easily worked and adapted to the purpose is
unobtainable.

There are a few flint deposits found in southern Illinois in which the
material occurs in nodules that can be made with even less work than a
piece of wood into suitable implements; and in the country which may be
considered as belonging to this archeologic district the flint hoes and
spades are tolerably abundant. In other portions of the country, wood,
the shoulder blades of large animals, and musselshells perforated for
attachment to a handle, were formerly used; the shells are frequently
found, but the other materials have long since disappeared.

Early observations on the industries of the aborigines are significant.
Thus, according to De Forest, the Connecticut Indians used spades
rudely constructed of wood, or of a large shell fastened to a wooden
handle;[122] and Palmer[123] figures a hoe made of horn, 14 by 5 by
one-fourth inches, in a wooden handle 5 feet long, which is split and
slipped over the smaller end; such, with others of wood and stone,
were used among the Utah Indians before iron was introduced. Dawson
holds that they were probably prepared in large numbers for the
planting time, when the whole tribe mustered to till the fields, and
that when the work was over they were gathered and hidden in some
safe place until the next season.[124] This may have been the case
to some extent, but the specimens found in these hiding places seldom
have marks of use, and it is more probable that they were the property
either of persons living at a distance or of an individual manufacturer
in some particular village, being thus concealed for safe-keeping until
there was a demand for them or, perhaps, to await a convenient time for
transportation. A sedentary tribe would have no more reason for hiding
this than any other kind of property.

[Illustration: FIG. 169.--Chipped spade with pointed ends.]

[Illustration: FIG. 170.--Chipped spade with rounded ends.]

The chipped implements known as spades are frequently found buried in
large numbers. Two caches were disclosed by high water in 1884, near
Caseyville, Kentucky, containing, respectively, 57 and 75 specimens
from 6 to 13 inches long.

The most common form is that having an oval or elliptical outline, with
the ends either coming to a point or rounded. Long use of those having
pointed ends would wear them off until they approached the others in
form; but so many of both patterns show no evidence of use that this
distinction must be considered intentional. The principal varieties are
as follows:

_A._ Those with pointed ends. Figure 169 represents a typical specimen
of yellow flint, from Union county, Illinois.

  +----------------------------+---+---+
  |  District.                 | A | B |
  +----------------------------+---+---+
  |Southwestern Illinois       |  2|  2|
  |Southeastern Arkansas       |  2|   |
  |Cheatham county, Tennessee  |   |  1|
  |Union county, Mississippi   |  1|   |
  +----------------------------+---+---+

  KEY:
  A = Yellow flint.
  B = Grey flint.

_B._ Those with the ends rounded. Represented by figure 170 (yellow
flint, from Union county, Illinois).

  +-----------------------------+---+---+---+---+
  |  District.                  | A | B | C | D |
  +-----------------------------+---+---+---+---+
  |Southwestern Illinois        |  2|  2|   |   |
  |Cheatham county, Tennessee   |   |   |  1|   |
  |Lauderdale county, Tennessee |  1|   |   |   |
  |Polk county, Tennessee       |   |   |   |   |
  |Lauderdale county, Alabama   |   |   |   |  4|
  |Craighead county, Arkansas   |  1|   |   |   |
  +-----------------------------+---+---+---+---+

  KEY:
  A = Yellow flint.
  B = Grey flint.
  C = Brown flint.
  D = Argillite.

A specimen from Jackson county, Illinois, has had a portion of the edge
broken squarely. The polish over this fractured surface shows that it
was long used after breaking without being rechipped to a sharp edge.
This indicates usage only in loose ground, as it evidently would be
quite difficult to force the square, broken part into a hard soil or
tough sod.

The specimens from Polk county, Tennessee, are pecked or chipped,
or both, and are quite roughly made. They are neither scratched nor
polished, and may be unfinished implements of some other class, though
agreeing closely with the flint spades in shape and size.

_C._ A modification of the last form has the upper portion chipped
away along the sides until it is ovoid, with a blunt point, leaving
the lower part a regular curve. An example, shown in figure 171, is of
grayish brown flint, from Scott county, Missouri. There are also one
each from Mississippi county, Missouri, and Hopkins county, Kentucky,
of the same material.

_D._ Like the above, but much shorter in ratio to the width, and with a
flatter curve. The type, figure 172, is of yellow flint, from a mound
in Obion county, Tennessee. There are also three from Union county,
Illinois, one of them with almost the same dimensions.

_E._ Semicircular outline, with sides notched for securing the handle,
as in arrowpoints and spearheads. Represented by figure 173, showing a
specimen of gray flint from a mound in Mississippi county, Arkansas.
There are four additional specimens, all from Union county, Illinois.

_F._ A related form, also notched for attachment of handle. Figure 174
represents an example of yellow flint, from Poinsett county, Arkansas,
the only one of this shape in the collection.

From Jackson county, Illinois, there is a series beginning with a small
scraper and a small scraper-like celt, and passing gradually into the
large spades or digging-tools, there being a number of intermediate
forms and sizes. Two specimens, only 6 inches long, have the glazed
surface so characteristic of these implements, which could have been
produced only by long-continued use in digging.

From a workshop at Mill creek, Union county, Illinois, there are a
large number of pieces in every stage of work. Among them can be made
series of all the different types here given, from the nodule in its
natural state to the completed implement. Near by is a flint deposit
showing extensive aboriginal quarrying.

[Illustration: FIG. 171.--Chipped spade, ovoid.]

Dawson,[125] in speaking of these implements, says: “The rudest of all
rude implements, similar to the paleoliths of Europe, were used by the
more settled and civilized agricultural nations.” While the majority of
them are rude, simply because there was no necessity for elaborate work
or fine finish in tools of this class, yet there are many specimens
(as, for example, the one shown in figure 171) which in symmetry and
workmanship will compare favorably with the larger specimens of other
types, due regard being had to the fact that the coarse flint of which
they are usually made does not admit of the most delicate execution.


TURTLEBACKS.

The singular name “turtleback” is suggested instantly on seeing a
specimen of the class so designated by Abbott and others. As commonly
used, it refers to rude or unfinished leaf-shape implements of
any size, which may be found in great abundance almost anywhere.
It is used here, however, to denote more especially the disks or
almond-shaped pieces of flint or chert sometimes found cached in
considerable numbers.

Perkins[126] records the discovery of such caches in Vermont; an
exceptional case, as they are seldom found outside of the Mississippi
valley. The southern portion of Illinois has furnished more than any
other section; those found there are almost invariably made from
nodules of bluish gray hornstone, the concentric lines being strongly
marked.[127]

[Illustration: FIG. 172.--Chipped spade.]

The Bureau has secured a large number from southern Illinois, ranging
from 3½ to 7½ inches in length, some nearly circular, others having a
length nearly twice the breadth. All have secondary chipping around the
edges. Many of the larger ones and most of the smaller have the edges
more or less worn or polished in such manner as would result from use
as knives or scrapers. A typical specimen is shown in figure 175.

[Illustration: FIG. 173.--Chipped spade, showing handle notches.]

[Illustration: FIG. 174.--Chipped spade.]

[Illustration: FIG. 175.--Chipped disk, or “turtleback.”]

Stevens[128] denies in strongest terms that these relics are unfinished
implements, saying it is the worst possible form into which flint
could be chipped for carrying or for future work. On the other hand,
Cheever[129] says the Indians of California usually carry a pouch of
treasures, consisting of unfinished arrowheads or unworked stones, to
be slowly wrought out when they are industriously inclined. Catlin,
too, observed that the Apache sometimes carry bowlders of hornstone a
long distance to obtain material for arrowheads;[130] and according to
im Thurn, the various Indian tribes of Guiana have each their special
manufacture and exchange with other tribes.[131] Tylor says:

    Till lately the Patagonians, when they came on their journeys
    to a place where suitable flint or obsidian was to be found,
    would load themselves with a supply of lumps to chip into these
    primitive currier’s scrapers.[132]

Both Jewitt[133] and Evans[134] say that stones of this character were
used as sling-stones; but there is no evidence that North American
Indians ever used slings. Speaking of similar stones, Tylor remarks:

    They were used either as knives or scrapers; with the curved
    side upward (or out) there would be no danger of cutting a hide
    in skinning game, and they could be used to cut up the flesh;
    while by putting the pointed end in the handle they could be
    used as scrapers.[135]

The smoothed edge in so many specimens substantiates the last
statement, while the theory that they are unfinished implements finds
support in the fact that nearly all the nodules from which they are
made have an ellipsoid form, and the present shape of the implement
would result from chipping away the useless weathered surface to lessen
the weight.


SMALLER CHIPPED IMPLEMENTS.

MATERIALS AND MODES OF MANUFACTURE.

In the remaining portion of this paper, which will treat of the
smaller chipped implements, a plan somewhat different from that of the
preceding part will be followed.

As already stated, these specimens are almost invariably made of some
form of flint; this term including chalcedony, basanite, jasper, chert,
hornstone, and similar rocks. So common is its use that the term
“flints” is gradually being adopted as a name for all the different
classes of arrowheads, knives, drills, etc. The exceptions are not
numerous enough to justify separate classification, so no tables of
material will be used. Further, the great abundance of such relics in
all portions of the country makes useless any allusion to the number
from any particular locality; about the only limitation to their
discovery is the amount of time and care which one chooses to give.

Before entering on the description, some quotations may be given in
regard to methods of making these chipped implements.

According to Evans, the Mexican Indians take a piece of obsidian in the
left hand and press it firmly against the point of a small goathorn
held in the right, and by moving it gently in different directions they
chip off small flakes until the arrow is complete;[136] they also
cut a notch in the end of a bone, into which the edge of the flake
is inserted and a chip broken off by a sideways blow.[137] According
to the same author, the Eskimo sometimes set the flake in a piece of
split wood. The arrow is roughly chipped by blows with a hammer, either
direct or with a punch interposed, and is then finished by pressing
off fine chips with a point of antler set in an ivory handle.[138] Not
only leaf-shape barbed arrows, but also ones either with or without
the stem, can be produced by pressure with a point of antler; the
former, however, are the more easily made, and were probably earlier in
use.[139]

The Plains Indians lay the flat side of a flake of obsidian on a
blanket, or other yielding substance, and with a knife nick off the
edges rapidly. In their primitive state they probably used buckskin
instead of the blankets, and pointed bone or horn instead of the
knife.[140]

The Apache holds the flake or flint in his left hand, places his punch
at the point where the chip is to be broken off, and it is struck by an
assistant, thus knocking a chip from the under side; the flake is then
turned and the process repeated, until the arrow is complete. The stone
is held in the hand, as it can not be chipped on a hard substance.[141]
A punch observed by Catlin in use by these Indians was a whale tooth
6 or 7 inches long, with one round and two flat sides. The Fuegians,
according to the same authority, use a similar process and make as fine
implements.[142]

The Eskimo make a spoon-shaped cavity in a log, lay the flake over it,
and press along the margin, first on one side and then on the other,
like setting a saw, until they form two sharp serrated edges. The
working tool is a point of antler firmly bound into a piece of ivory.
The same plan is used by widely separated peoples.[143]

Nilsson, in chipping out gun flints with a stone hammer, found it
necessary to have the point operated on lie immediately above a point
that rested on the rock “anvil” which he used.[144]

The Veeard or Wiyot of California used a pair of buck-horn pincers
tied together with a thong at the point; they first hammered out the
arrowhead in the rough, and then with these pincers carefully nipped
off one tiny fragment after another.[145] The Klamath cover the hand
with a piece of buckskin to keep it from being cut, and lay a flake
along the ball of the thumb, holding it firmly with the fingers. With a
point of antler from 4 to 6 inches long, they press against the edge,
thus removing scales from the opposite side; they turn the flake around
and over frequently, to preserve symmetry.[146]

The Shasta Indian lays a stone anvil on his knee, holds the edge of the
flake against it, and with his stone hammer chips off flakes, finishing
the base first, and gently chipping the whole arrow into shape. Both
obsidian and glass are used.[147] The Shoshoni Indians used the same
process.[148]

A Pit River Indian has been seen to make a very sharp and piercing
arrow from a piece of quartz, with only a piece of round bone, one end
of which was hemispherical with a small crease in it (as if made by a
thread) one-sixteenth of an inch deep. The arrow was made by pressing
off flakes by main strength, the crease being to prevent the bone from
slipping, and affording no leverage.[149] John Smith (1607) says of the
Powhatan Indian:

    His arrowhead he maketh quickly, with a little bone, of any
    splint of stone or glass.[150]

The Cloud River Indian used two deer prongs, one much smaller than the
other, the points ground to the form of a square, sharp-pointed file.
He had also some pieces of iron wire tied to sticks and ground in the
same manner; these were better than the deer horn, because harder, and
not needing to be sharpened so often. The flake was held firmly in the
left hand, guarded by a piece of buckskin; he pressed off chips with
the larger tool, turning the arrow end-for-end when done on one side,
so as to keep the edge opposite the middle line. The notches for barbs
were worked out in a similar manner with the smaller tool.[151]

Some of the California Indians prefer agate and obsidian for their
implements, as the close grain admits more careful working. They use a
tool with its working edge shaped like a glazier’s diamond (apparently
a piece of bone or antler with a square-cut notch on the side); the
flake is held in the left hand, while the nick in the side of the tool
is used to chip small fragments.[152] Peale makes similar statements,
and adds that the notches are of different sizes to suit the different
stages of work.[153]

The Klamath Indians, according to Schumacher, have a slender stick 1½
feet long, with a piece of sea-lion tooth, or antler, fastened to the
end of it. Holding one end under the arm to steady it, they take a
flake in the left hand, wrapped in a piece of buckskin so as to leave
only the edge exposed, and by pressure with the point of the tool break
off flakes as large as necessary, the last being quite fine, to give
sharp edges to the arrow. The notches are worked out by means of a
point of bone 4 or 5 inches long, without a shaft.[154] Chase gives a
similar account, but says that iron points have now taken the place of
the bone or horn points formerly used.[155]

It may not be out of place in this connection to give a few quotations
in regard to the length of time required for making an arrowhead.

According to the Marquis de Nadaillac, the Mexicans could turn out
a hundred flint knives (probably only unworked obsidian flakes) an
hour,[156] while Crook says that the Plains Indians with only a knife
for nicking off the edges, will make from fifty to one hundred arrows
in the same period.[157] Chase found that a Klamath Indian required
five minutes to complete a perfect arrowhead;[158] though Stevens
observes that a Shasta Indian spent an hour in chipping one from a
flake of obsidian,[159] and Lubbock states that the most skillful
Indian workmen can not hope to complete more than a single arrow
in a day’s hard work.[160] Powers also speaks of the aborigines of
California as "using that infinite patience which is characteristic of
the Indian, spending days, perhaps weeks, upon a single piece;[161] and
Tylor notes “that utter disregard of time that lets the Indian spend a
month in making an arrow.”[162]

The last two references are probably to the large and finely worked
pieces used for ceremonial or ornamental purposes.


CLASSIFICATION OF THE IMPLEMENTS.

The only practicable division of the greater part of the smaller flints
is into stemmed and stemless, the former having a prolongation at the
base for firmer attachment to a shaft or handle, the latter being of a
triangular or oval shape. The stemmed implements may be barbed or not,
and the stem either narrower or broader toward the end.

The name “arrowhead” so commonly applied, fits only the minority of
specimens, as none but the smaller ones could be so used; the larger
are too heavy. The longest stone arrowpoint in the extensive collection
of arrows in the National Museum measures two and five-eighths inches
in length and is narrow and thin. An arrowpoint two inches in length is
seldom seen. The larger specimens were probably knives and spearheads;
but it would be difficult to assign any certain use for a particular
type, the markings on so many indicate usage for which their shape
would seem to render them unsuitable. It is probable that a single
specimen served a variety of purposes.

Wood, bone, and shell were also used to a considerable extent, in
the manufacture of implements for which flint would seem much better
adapted. Thus for fish spears the southern Indians used canes,
sharp-pointed, barbed, and hardened in the fire,[163] while knives were
formerly made of flint or cane; these are still used when the hunting
knife has been lost.[164] The California Indians had arrows tipped
with hard-pointed wood for common use, and with agate or obsidian for
war.[165]

The accompanying diagram (figure 176) will render plain the different
terms used in the following descriptions:

[Illustration: FIG. 176--Diagram, explaining terms.

  KEY:
  _a_ Point.
  _b_ Edge.
  _c_ Face.
  _d_ Bevel.[166]
  _e_ Blade.
  _f_ Tang.
  _g_ Stem.
  _h_ Base.
  _i_ Notch.
  _k_ Neck.
  _m_ Barb, or shoulder.
]

The only difference between barb and shoulder is that the barb is
prolonged toward the base. The shoulder is called squared or rounded
according to whether the edge of the implement makes an angle or a
curve where drawn in to form the stem.

In the stemless specimens the base is the end opposite the point.

A tapering stem means one narrowing toward the base; straight, one
whose sides are parallel; and expanding, one which is widest at the
base.


STEMLESS FLINTS.

CHARACTERS AND USES.

The stemless flints are triangular or oval in outline. For convenience
they will be divided into those small enough for arrowpoints (not above
2½ inches long) and those which are too large for such purpose. The
latter reach to the length of 7½ inches. They are chipped to a sharp
edge all around. The ratio of width to length varies from 1:4 to 4:5.

These objects were mostly for use as knives, scrapers or spearheads.
Some of the thicker ones were spikes for clubs. Abbott[167] mentions
three triangular jasper implements 3 to 4 inches long from graves,
associated with fragments of large bones which showed plainly that
they had been used for clubs, and the Iroquois are known to have used
a club with a sharp-pointed deer-horn about four inches long inserted
in the lower side. Schoolcraft[168] illustrates a pointed stone with
a square section (apparently of the class usually called “picks”),
mounted in a club which is curved at the end to let the spike set in
the end at a right angle to the handle; and Brickell observes that the
North Carolina Indians used clubs or long poles, in the ends of which
were fastened artificially sharpened stones, or horns of animals.[169]
Morgan also notes that among the Iroquois rows of arrow-shaped chert
heads about two feet in extent have been found lying side by side. They
were set in a frame and fastened with thongs, forming a species of
sword.[170] According to Tylor the Mexicans had a similar sword, with
obsidian teeth gummed in holes in a war club,[171] and Bourke observed
at Taos pueblo a similar weapon with iron teeth.[172] But the number of
specimens found mounted indicates that most of them were used as knives
or scrapers.


LARGER IMPLEMENTS.

_A._ With base and edges straight or slightly convex; corners square.
The type illustrated in figure 177 is from Montgomery county, North
Carolina. Similar forms come also from eastern Tennessee; central
and western North Carolina; southwestern Illinois; Miami and Scioto
valleys, and central Ohio; southwestern Wisconsin; northeastern and
southwestern Arkansas; northeastern and northwestern Alabama, and Coosa
valley in the same state; Kanawha valley, West Virginia; northeastern
and central Kentucky; and Savannah, Georgia.

[Illustration: FIG. 177.--Triangular chipped flint.]

_B._ Base straight or nearly so; edges parallel most of the length,
curving abruptly to a point; usually with one face less convex than the
other, even quite flat, giving a plano-convex section; medium size.
The specimen shown in figure 178, from Kanawha valley, West Virginia,
is representative. Other examples come from eastern Tennessee; central
North Carolina; northwestern Alabama; Kanawha valley; and southwestern
Illinois.

[Illustration: FIG. 178.--Chipped flint.]

_C._ Base straight or nearly so; corners square or slightly rounded;
edges convex, curving gradually and regularly to the point; usually
widest about one-third of the way above the base; varying much in
width, and in length from 6½ inches down to the arrowpoint. A few of
the largest have the edges slightly expanding at their junction with
the base, for firmer attachment to a handle. The type is figure 179
(from Loudon county, Tennessee). Other specimens are from eastern
Tennessee; central and western North Carolina; Kanawha valley; Keokuk,
Iowa; Miami and Scioto valleys, and central Ohio; eastern, southern,
and southwestern Wisconsin; northeastern Arkansas; central and
northeastern Kentucky; northwestern Georgia, and Savannah; southwestern
Illinois; and Coosa valley, Alabama.

[Illustration: FIG. 179.--Chipped flint.]

_D._ Narrow and thick; up to 6 inches long; convex base; edges straight
to the base, where they expand somewhat, giving the implement a bell
shape. The largest specimen in the lot (figure 180) has both faces
polished almost the entire length, a feature absent from all the
others. This example is from Caldwell county, North Carolina. The form
is found also in central and western North Carolina, eastern Tennessee,
northeastern Kentucky; Kanawha valley; and northeastern Arkansas. Few
of the flints occur in the collection except from the two localities
first mentioned, where they are moderately abundant.

[Illustration: FIG. 180.--Chipped flint, somewhat bell-shape.]

_E._ Elliptical outline; some very thin, others resembling celts.
One from Kanawha valley has the projecting facets and ridges on one
face very smooth from use, those on the other being still sharp, as
when first chipped. The one figured has the edge worn smooth entirely
around, seemingly from use as a cutting tool, the ends being most worn.
Represented by figure 181 (from Dane county, Wisconsin). Found also in
southern and southwestern Wisconsin; eastern Tennessee; northeastern
Arkansas; central and western North Carolina; Brown county, Illinois;
Kanawha valley; and South Carolina.

[Illustration: FIG. 181.--Chipped flint, elliptical outline.]

[Illustration: FIG. 182.--Chipped flint, leaf-shape or oval outline.]

_F._ With the outline a continuous curve from the point entirely
around, the base being regularly rounded. This is the model of the
pointed oval or leaf-shape flint. Sometimes one face is flatter than
the other, being less worked, or in a few cases the unaltered flat side
of a flake. Usually they are quite symmetrical, but occasionally one
edge is more curved than the other. The type illustrated in figure
182 is from Vernon county, Wisconsin. Other specimens are from western
and central Wisconsin; eastern Tennessee; Miami and Scioto valleys,
and central Ohio; southwestern Illinois; Kanawha valley; northeastern
Kentucky; northeastern and southwestern Arkansas; northwestern and
northeastern Georgia, and Savannah.

[Illustration: FIG. 183.--Chipped flint.]

_G._ With convex edges and slightly convex base; being a medium between
the triangular and the leaf-shape. Some are quite narrow and thick,
others wide and thin; the former probably clubs or spearheads, the
latter knives. A good example, shown in figure 183, is from Savannah,
Georgia. Others are from central Arkansas; central Ohio; eastern
Tennessee; Kanawha valley; central North Carolina; southern Wisconsin;
northwestern Georgia, and Savannah; northeastern Alabama; and South
Carolina.

[Illustration: FIG. 184.--Chipped flint, large, pointed elliptical
outline.]

_H._ Pointed at each end; mostly elliptical, though sometimes widest
near one end; from 5 to 12 inches long. Nearly all are thin and
finely worked, with sharp edges. One from Cheatham county, Tennessee,
has a deep notch on each edge about one-third of the way from one
end, this end being somewhat rounded. The type (figure 184) is from
Lonoke county, Arkansas. Other specimens are from central Arkansas,
southwestern Illinois, northern and eastern Tennessee.

[Illustration: FIG. 185.--Chipped flint, large, long sharp point.]

_I._ A similar pattern, but having one end continued into a narrow
point, shown in figure 185, is from Bartow county, Georgia. Another of
the same kind comes from Loudon county, Tennessee.

_J._ Similar to group _H_, but with the edges straight for more than
half the length, probably to afford a more convenient hold for the
hand. The form is shown in figure 186, representing a specimen from
Mississippi county, Arkansas. Others are from northwestern Georgia,
southwestern Illinois, and northeastern Arkansas. There are a few
similar in method of chipping to those of group _I_, but smaller and
very narrow, from eastern and western Tennessee and northeastern
Arkansas.

_K._ Double-pointed or lenticular in outline; quite symmetrical; from
2 to 4 inches long; thin and well worked. Represented in northeastern
Arkansas; South Carolina; central and western North Carolina; eastern
Tennessee; Scioto valley, and central Ohio; Kanawha valley; and
northwestern Georgia.

[Illustration: FIG. 186.--Chipped flint, large.]

[Illustration: FIG. 187.--Chipped flint.]

_L._ With straight or concave base; edges diverging by straight or
slightly convex lines for about half the length from the base, then
curving to the point. There is considerable variation in the relative
width of these, as well as the amount of concavity at the base. None
with this outline of the edges has a convex base. From 2 to 6 inches
long. The form is illustrated by figures 187 (from Lawrence county,
Ohio), and 188 (from Blount county, Tennessee). In addition to the
specimens figured, there is material in the collection from Scioto
valley, Ohio; central and western North Carolina; Keokuk, Iowa; Brown
county, Illinois; eastern Tennessee; northeastern Alabama, and Coosa
valley in the same state; Kanawha valley; South Carolina; southern
Wisconsin; and Savannah, Georgia.

[Illustration: FIG. 188.--Chipped flint.]

[Illustration: FIG. 189.--Chipped flint, with shoulders.]

_M._ A modification of the last form in which the edge expands just
at the base, forming a point at each corner or shoulder. Illustrated
in figure 189. The specimen figured is from Forsyth county, Georgia.
Others are from northwestern Georgia, and Savannah; eastern Tennessee;
northeastern Kentucky; southwestern Wisconsin; and Kanawha valley.


SMALLER OBJECTS.

Small triangular or oval arrowpoints, differing from those previously
described in being too small for any similar uses, few of them being
so much as two inches in length, and varying from that size to not
more than half an inch. Nearly all are very thin, though some of the
narrower ones may have a diamond or thick lenticular section. Some are
very slender, so much so that they are usually classed as perforators;
others are equilateral. Both the base and edges may be straight,
convex, or concave. A few have a shallow notch in each edge just above
the corner; nearly all, however, have both base and edge continuous.

[Illustration: FIG. 190.--Chipped flint, small.]

[Illustration: FIG. 191.--Chipped flint, triangular.]

The groups and subdivisions which have been recognized among the
smaller chipped flint objects in the Bureau collection may be
enumerated as follows:

_A._ Concave base. The concavity may vary from almost a straight line
to one-third the length of the flint. Usually symmetric, as in figures
190 and 191, though sometimes one tang or barb, if it may be called
such, is longer than the other, as in figure 192. A very few have
beveled or serrated edges.

1. Convex edges. The type, shown in figure 190, is from Jefferson
county, Tennessee. Other specimens are from eastern Tennessee; Union
county, Mississippi; northwestern Georgia, and Bibb county and Savannah
in the same state; central and western North Carolina; Miami and
Scioto valleys and central Ohio; Kanawha valley, West Virginia; South
Carolina; and southwestern Arkansas.

[Illustration: FIG. 192.--Chipped flint, asymmetric.]

[Illustration: FIG. 193.--Chipped flint, concave edges.]

2. Straight edges, as in the specimen illustrated in figure 191, from
Ouachita county, Arkansas. Similar specimens are found in northeastern
and southwestern Arkansas; western and central North Carolina; Kanawha
valley; eastern Wisconsin; northwestern Georgia, and Savannah; eastern
Tennessee; South Carolina; southwestern Illinois; Union county,
Mississippi; and northeastern Kentucky.

3. Concave edges. This abundant form is illustrated in figures 192
(Cherokee county, Georgia), 193 (Caldwell county, North Carolina),
and 194 (Washington county, Virginia). Other specimens are from
northwestern Georgia and Savannah; central and western North Carolina;
Kanawha valley; eastern Tennessee; northeastern Kentucky; southwestern
Arkansas; South Carolina; Union county, Mississippi; and Coosa valley,
Alabama. This subdivision of group _A_ is abundant, as well as widely
distributed.

[Illustration: FIG. 194.--Chipped flint, triangular.]

_B._ With straight bases. These are all small, the broad ones being
short and the long ones slender. Most of them are both short and narrow.

[Illustration: FIG. 195.--Chipped flint, small.]

[Illustration: FIG. 196.--Chipped flint, short, convex edges.]

1. Convex edges as in figures 195 (McMinn county, Tennessee) and
196 (Bradley county, Tennessee). The form is widely distributed,
being represented by specimens from eastern Tennessee; northeastern,
southwestern, and southeastern Arkansas; Scioto valley, Ohio;
northeastern Kentucky; northwestern Georgia and Savannah; Kanawha
valley; Union county, Mississippi; Holt county, Missouri; northeastern
Alabama, and Coosa valley in the same state; southern and southwestern
Wisconsin; and western North Carolina.

2. Straight edges. Exemplified by the specimen shown in figure 197,
from McMinn county, Tennessee. Found also in eastern Tennessee;
northeastern Arkansas; Coosa valley, Alabama; Union county,
Mississippi; Kanawha valley; Miami and Scioto valleys, Ohio; eastern,
southern, and southwestern Wisconsin; western and central North
Carolina; Bartow county and Savannah, Georgia; South Carolina, and
northeastern Kentucky.

[Illustration: FIG. 197.--Chipped flint, triangular.]

[Illustration: FIG. 198.--Chipped flint, concave edges.]

3. Concave edges, as in figure 198 (from Bledsoe county, Tennessee).
Other examples of this class are from eastern Tennessee; Scioto valley,
Ohio; northeastern and southwestern Arkansas; Kanawha valley, West
Virginia; northeastern Kentucky; western and central North Carolina;
northeastern Alabama; southwestern Illinois; and Savannah, Georgia.

_C._ Convex bases. Less abundant than the preceding, and the forms
representing it are less variable. Its sub-groups are as follows:

[Illustration: FIG. 199.--Chipped flint, convex base.]

1. Convex edges. Some of these have a slight reverse curve at the base,
giving a slight barb or shoulder. A few are widest at or near the
middle, with bases somewhat pointed, but most of them are widest at
the junction of the base and edges. They are mostly of the leaf-shaped
type, but quite small. Figure 199 (Mississippi county, Arkansas) is a
good example. Others are from northeastern and southwestern Arkansas;
northeastern Alabama and Coosa valley; Kanawha valley, West Virginia;
eastern Tennessee; western and central North Carolina; northwestern
Georgia; eastern Wisconsin; southwestern Illinois, and Miami valley,
Ohio.

2. Edges concave or nearly straight. There are very few of this form,
as nearly all with the base convex have the edges also convex. The type
(figure 200) is from Lawrence county, Ohio; others are from Miami and
Scioto valleys, Ohio; Kanawha valley; and southeastern and southwestern
Arkansas.

Two exceptional forms, which may be considered modifications of the
triangular, come from eastern Tennessee and western North Carolina.
The first, which is pentagonal, is shown in figure 201; the second,
a medium between a perforator and a deeply serrated, triangular
arrowpoint, is shown in figure 202.

[Illustration: FIG. 200.--Chipped flint, edges concave.]

[Illustration: FIG. 201.--Chipped flint, pentagonal.]

While it is likely that the smaller flints, last described, were
intended for arrows, it can not be stated with confidence whether they
were for use in war or in hunting. It is said that some of the western
Indians used barbless arrows with, long, tapering blades, firmly
attached to the shaft, for hunting, while for war barbed arrows, only
slightly attached, were employed.[173]

In many arrows with triangular points in the National Museum the sinew
with which the flint is fastened to the shaft is brought over the
corner or shoulder in such a way as to bind the point as firmly as
could be done if it were barbed or stemmed, so that when the shaft is
drawn from a wound the point must come with it. If an arrowhead of this
form were inserted in a shaft, which was then wrapped behind the flint,
the latter would remain in the wound when the shaft was withdrawn.

[Illustration: FIG. 202.--Chipped flint, narrow and thick.]

There is no reason for supposing that only the larger points were used
for war purposes; the greater penetrating power of the thin, sharp ones
would seem to fit them especially for such work, and it is probable
that the smaller straight or tapering-stemmed flints (next to be
described) were also utilized for this purpose, as they could be easily
detached. Those with expanding stem may have been used for hunting, as
they could be permanently fastened to the shaft.


STEMMED FLINTS.

The abundant and variable material of this class may roughly be grouped
by form into two divisions, in the first of which the stem is tapering
or straight, while in the second the stem is generally expanding.


STRAIGHT OR TAPER STEMS.

_A._ Square or rounded shoulders; stem concave at base; edges usually
convex, rarely straight or concave. Nearly all are of quartzite or
coarse flint, roughly worked, the one illustrated (figure 203) being
above the average, and are mostly from western North Carolina and the
adjacent portions of South Carolina and Tennessee. All of them exceed
three inches in length. Those from Savannah, Georgia, are usually
much wider relative to the length than the specimens in the Bureau
collection from other localities.

The specimen figured is from Montgomery county, North Carolina; others
are from western and central North Carolina; Kanawha valley; eastern
Tennessee; South Carolina; Coosa valley, Alabama; and northwestern
Georgia and Savannah.

_B._ Similar to the last, except that the base is straight or convex,
instead of concave. Large size, and nearly all of rough finish; mostly
of argillite or flint, a few of quartzite. Varying considerably in
width, as well as in thickness, some having almost a diamond section,
others wide and thin, the latter generally having the edges worked
quite sharp. Some are made from a large flake which has been dressed
on one side only. One from Montgomery county, North Carolina, has the
end opposite the stem worked round and sharp, similar to the blunt
arrowheads, but its size excludes it from this class. From Savannah
there are several which are chipped very thin, and smoothly finished,
but they are exceptional; some from this locality are very large,
reaching 5 by 3 inches, while others are almost as wide as they are
long.

[Illustration: FIG. 203.--Chipped flint stemmed, barbless.]

The specimens of this form are chiefly from western and central North
Carolina; eastern Tennessee; South Carolina; southwestern Georgia,
and Savannah; eastern Wisconsin; southwestern Arkansas; southwestern
Illinois; northwestern Alabama and Coosa valley in the same state;
Kanawha valley, West Virginia; and central Ohio.

_C._ Of the same general form as the last, but much smaller, and
finely worked. Most seem to be intended for arrowheads. The specimen
illustrated in figure 204 is from Caldwell county, North Carolina;
others are from South Carolina; western and central North Carolina;
Union county, Mississippi; eastern Tennessee; Coosa valley and
Tuscaloosa, Alabama; Miami valley, Ohio; Kanawha valley; northwestern
and southwestern Georgia and Savannah; and southeastern Arkansas.

[Illustration: FIG. 204.--Chipped flint, stemmed, barbless.]

_D._ Convex edges; stem usually tapering with straight base, though it
is noticeable that some are straight with convex base. Resembling the
last in form, but slender; from 1¾ to 4¼ inches long. From western and
central North Carolina; Kanawha valley, West Virginia; and Savannah,
Georgia.

[Illustration: FIG. 205.--Chipped flint, expanding shoulder.]

[Illustration: FIG. 206.--Chipped flint, double-curved edges.]

_E._ Differing from specimen shown in figure 203, in having the edges
expand at the shoulders in a projection or point, and varying more
in size, some being small enough for arrowheads. All from Savannah
(including the example shown in figure 205) are of smoother finish
than those from other sections, and are usually larger, ranging
from 2½ to 4½ inches long. There are some from this locality with
base straight or convex. Found also in western and central North
Carolina; Kanawha valley; South Carolina; eastern Tennessee; Coosa
valley and northeastern Alabama; Brown county, Illinois; northeastern,
southeastern, and southwestern Arkansas; and southwestern Georgia.

_F._ Edge having a double curve, being convex toward the point, and
curving outward at the shoulders. Few of them are barbed, though many
have the shoulder much expanded. Base sometimes convex or concave, but
more often straight; in a few it is somewhat pointed. In most of the
smaller specimens the base is notched, but of these none are over 2½
inches long. Stem tapering or expanding, rarely straight. A few have
the base rubbed smooth and dull, or even polished (this feature appears
in other forms, as noted); it seems to result from use as a knife or
scraper, but the implement as a whole does not appear to be adapted
to such use. None of them are over 3½ inches long, except a few from
Savannah; all from there are wide, but from other places the longer
ones are all narrow.

[Illustration: FIG. 207.--Chipped flint, double-curved edges.]

[Illustration: FIG. 208.--Chipped flint, convex edges, long, tapering
stem.]

The specimens illustrated (figures 206 and 207) are from Madison
county, Alabama, and Kanawha valley, respectively. Others are from
northeastern Alabama and Coosa valley; eastern Tennessee; northwestern
and southwestern Georgia and Savannah; Kanawha valley; Catahoula
parish, Louisiana; western and central North Carolina; southwestern
Illinois and Brown county in the same state; South Carolina;
southwestern Arkansas; and Miami valley, Ohio.

_G._ Convex edges; sharp points; stem always long and tapering; base
somewhat pointed, or outline of whole stem forming a regular curve.
Some slightly barbed, but mostly with only a small shoulder. The
specimens vary much in size, and also in delicacy of workmanship.
Classed by function the group would probably be divided among several.
The example shown in figure 208 is from Jackson county, Illinois.
Others come from southwestern Illinois; eastern Tennessee; South
Carolina; Kanawha valley; northeastern, southeastern, and southwestern
Arkansas; western and central Arkansas; and southern Wisconsin.

_H._ Similar to group _G_, save that the edges are straight while the
stem is somewhat shorter. All the specimens are small. Found in western
North Carolina; Kanawha valley, West Virginia; South Carolina; and
southeastern Arkansas.

[Illustration: FIG. 209.--Chipped flint with long, tapering stem.]

_I._ Differing from group _G_ in having concave sides; none are barbed,
and some have very wide shoulders. Nearly all are large. Two from
Savannah have the base straight, all the others being of the common
type. The type (fairly exemplified in figure 209) is from Union county,
Illinois, and others come from southwestern Illinois; southwestern
Arkansas; South Carolina; western North Carolina; Kanawha valley, West
Virginia; eastern Tennessee; and Savannah, Georgia.

[Illustration: FIG. 210.--Stemmed chipped flint, diamond or lozenge
shape.]

_J._ Lozenge or diamond shape; the four edges straight or nearly so,
varying a little toward convexity or concavity. In some the base
does not come to a point but is rounded or truncated; sometimes,
though seldom, there is a slight shoulder. From 1¼ to 3½ inches long.
A typical example, shown in figure 210, is from Chester county,
South Carolina. Additional material is from South Carolina; Kanawha
valley; Brown and Ogle counties, Illinois; eastern Tennessee; western
North Carolina; Bibb county and Savannah, Georgia; southeastern and
southwestern Arkansas; Union county, Mississippi; and Coosa valley,
Alabama.

[Illustration: FIG. 211.--Stemmed chipped flint.]

_K._ Edges usually convex, sometimes nearly straight, gradually
rounding off into the stem, which may be straight, tapering, or
slightly expanding; base straight or slightly convex. All of these
are narrow, mostly thick, and none over two inches long. The type
(figure 211) is from Bledsoe county, Tennessee; others are from eastern
Tennessee; western and central North Carolina; Coosa valley, Alabama;
northwestern Georgia; eastern, southern, and southwestern Wisconsin;
Kanawha valley, West Virginia; South Carolina; Brown county, Illinois;
and northeastern and southeastern Arkansas.

[Illustration: FIG. 212.--Stemmed chipped flint.]

_L._ Edges convex, a very few being straight; shoulders square or
somewhat rounded, in two or three somewhat expanding. Stem usually
straight, sometimes tapering; base straight or convex. Varying much
in size and relative width, being from 1¼ to 4½ inches long, and from
¾ to 2½ inches wide; some slender, others broad. Nearly all are quite
roughly made. Illustrated in figure 212 (from Cherokee county, Georgia).

Like many other forms of small chipped implements, the distribution
in this type is wide. It comes from northwestern Georgia and about
Savannah; Kanawha valley, West Virginia; Miami valley, Ohio;
southwestern Illinois; western and central North Carolina; eastern
Tennessee; northeastern Alabama and Coosa valley in the same state; and
southwestern Arkansas.

_M._ Convex edges; sharp points; very slight shoulders; stem tapering
by curved lines; base convex or somewhat pointed. All made of quartz,
quartzite, or coarse flint, and differing from the following group only
in being very slender and, owing to the material employed, much more
roughly finished. Found in western North Carolina, in South Carolina,
and in southwestern Arkansas.

_N._ Convex edges; remarkably symmetrical outline; most specimens
finely finished; slight shoulders; tapering stem, with convex base, the
whole stem having a quite regularly curved outline. From 2 to 4½ inches
long.

[Illustration: FIG. 213.--Stemmed chipped flint, ovoid.]

The type which is shown in figure 213 is from Dane county, Wisconsin.
This group also is widely distributed, being found in southern and
southwestern Wisconsin; northeastern Kentucky; southwestern Illinois;
Miami and Scioto valleys, Ohio, and the central part of the same
state; northeastern, central, and southeastern Arkansas; western North
Carolina; and Kanawha valley.

[Illustration: FIG. 214.--Stemmed chipped flint, short blade.]

_O._ Differing from group _N_ only in having longer stems and shorter
blades, the latter sometimes less than an inch. Illustrated in figure
214 (from Kanawha valley). Found also in Scioto valley and in central
Ohio; southwestern Wisconsin; southwestern Arkansas; and southwestern
Georgia.

_P._ Convex edges; square shoulders; stem forming a quite regular
and continuous curve, slightly expanding in some specimens. The one
shown in figure 215, from Kanawha valley, West Virginia, has the most
symmetric outline of any specimen in the entire collection. There
are other specimens from Kanawha valley, and also from northeastern
Kentucky; Miami valley, Ohio; Washington county, Pennsylvania; eastern
and western Tennessee; southwestern Illinois; and southeastern Arkansas.

[Illustration: FIG. 215.--Stemmed chipped flint, symmetric outline.]

[Illustration: FIG. 216.--Stemmed chipped flint.]

_Q._ Similar to group _P_ except that stem and base are straight. They
are symmetric and well finished, vary more in size than those of the
last group, being from 1¼ to 4¼ inches long, the others not reaching
either of these limits.

The type (figure 216) comes from Knox county, Ohio, and other specimens
from Miami valley and central Ohio; Keokuk, Iowa; northeastern
Kentucky; Kanawha valley; eastern and western Tennessee; eastern,
southeastern, and southwestern Arkansas; eastern and southwestern
Wisconsin; northwestern Georgia; and southwestern Illinois.

_R._ Edges generally convex, sometimes straight; base straight or
convex, only rarely concave; shoulders usually square, sometimes
rounded; stem expanding by straight lines. From less than an inch to 3½
inches long, mostly about the medium.

The form, which resembles that shown in figure 216 in a general way,
is widely distributed, its range including Keokuk, Iowa; Miami and
Scioto valleys, Ohio; Bibb county and Savannah, Georgia, as well as
the northwestern part of the state; eastern Tennessee; Kanawha valley,
West Virginia; southeastern and southwestern Arkansas; southwestern
Illinois, and Brown county in the same state; northeastern Kentucky;
southern and southwestern Wisconsin; western and central North
Carolina; and northeastern Alabama.

_S._ Differing from group _Q_ in having the blade short, stem long (in
some cases longer than blade), and only slight shoulders. Base somewhat
convex in a few specimens; from an inch to 2¼ inches in length. From
Kanawha valley; northwestern Georgia; Miami and Scioto valleys, Ohio;
southwestern Arkansas; southern Wisconsin; and northeastern Alabama.

Beginning with those of group _N_ and ending with those last described,
all the best worked and most finely finished specimens are from Kanawha
valley, West Virginia; northeastern Kentucky, and the central and
southern parts of Ohio.

_T._ Convex edges; square shoulders; slender; very long and slender
tapering or straight stem, coming almost to a point at the base.
Illustrated in figure 217 (from Kanawha valley). Others are from
central North Carolina; Kanawha valley; southwestern Arkansas; and
Catahoula parish, Louisiana. The specimens from the two latter
districts have the stem wider and less pointed than the others.

[Illustration: FIG. 217.--Chipped flint, with very long, slender stem.]

[Illustration: FIG. 218.--Stemmed chipped flint, with but one barb or
shoulder.]

_U._ With one large, much expanded shoulder, the other being absent or
very slight; both edges convex, or one convex and the other straight;
stem sometimes straight, but usually tapering, being almost pointed
in some; base usually convex, sometimes straight, rarely concave. A
specimen from Ross county, Ohio, has the base deeply notched; it seems
to have been symmetrical originally, and one barb or shoulder being
broken, to have had that edge dressed down. Many were thus reworked,
but in most cases it is evident that the form is original. Some are
slender, others broad.

The type shown in figure 218 is from Bowie county, Texas. Other
examples are from southwestern Arkansas; Catahoula parish, Louisiana;
Scioto valley, Ohio; Kanawha valley; western and central North
Carolina; eastern Tennessee; South Carolina; northeastern Alabama; as
well as from northwestern Georgia and about Savannah.


EXPANDING STEMS.

In this class of flints the stem is expanding, unless the contrary is
stated. The majority of specimens having barbs belong to this class;
while those with straight or tapering stem usually have only square or
rounded shoulders, the barb seldom appearing.

[Illustration: FIG. 219.--Stemmed chipped flint, short.]

[Illustration: FIG. 220.--Stemmed chipped flint.]

_A._ Short and broad; base usually straight, sometimes convex, rarely
concave; notched in from edges to form the stem; very seldom with
well-defined shoulders, and never barbed. The type, illustrated in
figure 219, is from Kanawha valley, West Virginia. Found also in
northeastern Kentucky; western North Carolina; northwestern Georgia and
about Savannah; eastern Tennessee; Coosa valley, Alabama; and Union
county, Mississippi.

_B._ Edges convex, seldom straight; base straight or rarely convex or
concave; notched in on edges close to base, so as to leave a slight
tang; thin and well worked; from an inch to 2¼ inches long. All from
Savannah have concave bases; a few are notched so as to have slight
shoulders, and they are somewhat larger than from other localities.
They fit better in this group, however, than in any other. A typical
example, shown in figure 220, is from Montgomery county, North
Carolina. Others are from central North Carolina; eastern Tennessee;
southwestern Illinois; various localities in South Carolina; and about
Savannah, Georgia.

_C._ Roughly made; unsymmetrical, seemingly made hastily; of various
patterns, including all the common shapes. Nearly all with convex
edges, few straight, none concave. Base straight or concave, often the
natural surface or fracture of the stone. Sometimes made from the tip
of a broken larger specimen. From 1 to 5 inches long; slender or wide;
usually thick, except when made from a thin flake. Edges notched just
at the base in some, leaving a slight tang; others have the corners
chipped out. This group is quite variable in size and in character of
workmanship, as well as in form. The material also is variable.

[Illustration: FIG. 221.--Stemmed chipped flint, roughly made.]

[Illustration: FIG. 222.--Stemmed chipped flint.]

The types (figures 221 and 222) are, respectively, from Bledsoe and
Polk counties, Tennessee. The range includes eastern Tennessee;
Kanawha valley; western North Carolina; eastern and southwestern
Wisconsin; northeastern Alabama and Tuscaloosa valley; South Carolina;
southwestern and northeastern Arkansas; central Ohio and Scioto valley;
northeastern Kentucky; and southwestern Georgia, as well as Savannah.

[Illustration: FIG. 223.--Stemmed chipped flint.]

[Illustration: FIG. 224.--Stemmed chipped flint, edges convex.]

_D._ Edges convex, rarely straight; base straight or convex; slender;
from 1¼ to 4 inches long; usually thin; deeply notched, with edges
worked close to base, leaving the latter as wide as the blade, or
nearly so. This form could be quite firmly attached to a shaft or
handle. It is illustrated by figure 223, representing one of the
specimens from Kanawha valley. It is found also in southwestern
Illinois and Brown county in the same state; eastern, southern, and
southwestern Wisconsin; western and central North Carolina; eastern
Tennessee; northwestern Georgia; central Ohio and Scioto valley;
southeastern Arkansas; northeastern Kentucky; and Coosa and Tuscaloosa
valleys, Alabama.

_E._ Edges convex; base straight or convex; shoulders square or
rounded; stem expanding by curved lines. A few are small enough for
arrows, but most of them are large or of medium size. The specimen from
Vernon county, Wisconsin, illustrated in figure 224, is representative.
The group is characteristic of southwestern Wisconsin; Kanawha valley;
central Ohio and Scioto valley; western and central North Carolina;
eastern Tennessee; southeastern and southwestern Arkansas; southwestern
Illinois; South Carolina; Coosa valley, Alabama; and Savannah, Georgia.

_F._ Edges straight or convex; long barbs, sometimes reaching to
the base; stem straight or slightly tapering; base straight, or
very slightly convex or concave, usually well finished. One barb is
sometimes longer than the other, or the stem may be to one side of
the center line. Sometimes made of a flake, the flat side being left
untouched.

[Illustration: FIG. 225.--Stemmed chipped flint, with long barbs.]

The type shown in figure 225 is from Madison county, Alabama. It is
found generally in northeastern and northwestern Alabama, and also in
eastern Tennessee; Kanawha valley; Keokuk, Iowa; Holt county, Missouri;
southwestern Illinois and Brown county in the same state; northwestern
Georgia and about Savannah; southeastern and southwestern Arkansas;
northeastern Kentucky, and western and central North Carolina.

_G._ Similar to the last, but with stem expanding by straight or curved
lines; base always straight in larger specimens, sometimes convex or
concave in smaller ones. Barbs varying in length, short in some and
reaching nearly to the base in others. From three-fourths to 3¾ inches
in length, and varying much in width.

[Illustration: FIG. 226.--Stemmed chipped flint.]

Figure 226 represents a typical example from Jackson county, Illinois.
The range, which is quite wide, includes southwestern Illinois;
northeastern, southwestern, and southeastern Arkansas; Miami and
Scioto valleys, and central Ohio; southern and southwestern Wisconsin;
western and central North Carolina; eastern Tennessee; South Carolina;
northeastern Kentucky; Kanawha valley; and Savannah, Georgia.

_H._ Wide blade; short; convex edges; square shoulders or slight barbs;
base convex or concave; stem broad and expanding by curved lines;
generally thick. Those with convex base are all of medium size, while
those with concave base range from an inch to 4 inches in length.

[Illustration: FIG. 227.--Stemmed chipped flint.]

The form is indicated in figure 227, representing a good specimen
from Dane county, Wisconsin. It is found over southern Wisconsin;
northeastern Alabama and Coosa valley; southwestern Illinois and Brown
county in the same state; central North Carolina; northwestern Georgia
and about Savannah; eastern Tennessee; Miami and Scioto valleys, Ohio;
Kanawha valley; southwestern Arkansas; South Carolina; and Keokuk, Iowa.

_I._ Edges parallel, or nearly so most of the length, with abrupt
curve to the point; base straight or slightly convex; stem expanding
by straight or curved lines; notched in from the corners of the base
giving long barbs, which, in a few, project slightly beyond the line of
edges; thin; well worked; from 2 to 4 inches long.

[Illustration: FIG. 228.--Stemmed chipped flint, broad point.]

[Illustration: FIG. 229.--Stemmed chipped flint, slender point.]

The specimen illustrated in figure 228 is from Dane county, Wisconsin,
and there are several others from southern Wisconsin; southwestern
Illinois; Scioto valley, Ohio; and Kanawha valley, West Virginia.

[Illustration: FIG. 230.--Stemmed chipped flint.]

_J._ Edges convex or sometimes straight; base straight or slightly
convex. Notched in on the edges, leaving the stem nearly or quite as
wide at the bottom as the blade; corners of the base square or slightly
rounded. Mostly small, suitable for arrows, though a few are larger,
up to 3¼ inches. A few of these have the base polished. Some of the
small ones are made of flakes having the natural, conchoidal shape and
worked on one side only. Typical forms, shown in figures 229 and 230,
are from Kanawha valley, and Nicholas county, Kentucky, respectively.
The distribution extends also over southern and southwestern Wisconsin;
Miami valley, Ohio; Holt county, Missouri; northeastern Kentucky; Brown
county, Illinois; southwestern Arkansas; Coosa valley, Alabama; eastern
Tennessee, and about Savannah, Georgia.

[Illustration: FIG. 231.--Stemmed chipped flint.]

[Illustration: FIG. 232.--Stemmed chipped flint, thin.]

_K._ Straight or convex edges (a few serrated or beveled); base
straight, sometimes polished; notched in from the corners so as to give
sharp barbs, with wide stem expanding by straight lines. Medium size.
Illustrated in figure 231 (Bradley county, Tennessee). Found in eastern
Tennessee; southwestern Illinois; Scioto valley; Kanawha valley; South
Carolina; and about Savannah, Georgia.

[Illustration: FIG. 233.--Stemmed chipped flint.]

[Illustration: FIG. 234.--Stemmed chipped flint.]

_L._ Very thin; well worked; usually quite symmetrical; base straight
or slightly concave; stem expanding by curved lines; with shoulders
or barbs; base with sharp tangs. Some specimens quite slender, others
almost as wide as long. Few are above two inches in length. The edge
is sometimes a broken line instead of a regular curve. The form is
shown in figures 232 and 233, representing specimens from Lawrence
county, Ohio, and Loudon county, Tennessee, respectively. Others are
from Kanawha valley; Miami and Scioto valleys, Ohio; eastern Tennessee;
western and central North Carolina; Union county, Mississippi;
northeastern Kentucky; and southwestern Illinois.

_M._ Convex edges; usually quite symmetric; base generally straight,
although sometimes convex or concave; stem expanding by straight or
curved lines, and notched in from the corners by a narrow notch whose
sides are parallel. Sometimes beveled (or feathered). The barb as
well as the notch of the same width throughout its entire length. The
type (figure 234) is from Knox county, Ohio, and similar forms come
from central Ohio; Kanawha valley; western North Carolina; southern
Wisconsin; southwestern Illinois; South Carolina; eastern Tennessee;
and Savannah, Georgia.

[Illustration: FIG. 235.--Stemmed chipped flint.]

_N._ Straight, or rarely convex, edges; base straight or slightly
curved, with rounded corners; notched in on the edges above the
corners, with sharp barbs. Nearly every specimen is beveled, and some
are serrated. Base polished in many of them even when slightly concave.
A good example from Ross county, Ohio, is represented in figure 235.
Others are from Miami and Scioto valleys and elsewhere in Ohio, as
well as from Kanawha valley; eastern Tennessee; northwestern Alabama;
southwestern Georgia, and about Savannah in the same state. The style
of chipping is frequently such as to give serrated edges, as in the
specimen figured.

[Illustration: FIG. 236.--Stemmed chipped flint, slender, with small
stem.]

_O._ Long; slender; thin; short, small stem; convex base; notched
upward from the corners of the base; short barbs. The type shown in
figure 236 is from Loudon county, Tennessee, and other specimens come
from eastern Tennessee and southeastern Arkansas.

[Illustration: FIG. 237.--Stemmed chipped flint, oval outline, notched.]

_P._ Convex edges and base; sometimes, though very seldom, the edges
are nearly straight; the typical, leaf-shape implement, except for the
notch, which is always worked in from the widest part of the specimen
at right angles to the axis. The base is invariably polished, even in
the smallest specimens. From Licking county (figure 237) as well as
from Miami valley and throughout central Ohio; Kanawha valley; eastern
Tennessee; southwestern Illinois; northeastern Alabama; southern
Wisconsin; and about Savannah, Georgia.

_Q._ Edges less convex than the last, sometimes straight; the notches
are worked in nearer the base, going in an angle of about 45 degrees,
instead of perpendicular to the middle line or axis. Sometimes the
blade is of uniform thickness until very close to the edges, which are
worked off in a double chisel-edge. Very few of these, or of group _P_,
are small enough for arrows. Usually symmetrical and well finished; the
base always polished, but whether from use or to add to the utility of
the specimen can not be determined. From Miami valley, Ohio; Keokuk,
Iowa; southwestern Wisconsin; and eastern Tennessee.

_R._ Differing from the two last described only in being longer, and
in having the stem always come to a point by either convex or concave
lines, instead of being regularly convex; base never polished. From
Kanawha valley, West Virginia, and central Arkansas.

_S._ Edges usually straight, sometimes concave, rarely convex; notched
in deeply from edges; seldom barbed; stem nearly always wider than
the blade, and large. Base convex; occasionally somewhat concave with
rounded corners, and nearly always polished. Some (including all from
the Savannah collection) are beveled and a few have blunt and rounded
points, apparently broken specimens reworked. From less than an inch
to nearly 3 inches long. Even among the very small ones, some have the
base polished.

An implement of this form, or of any form in which the stem is wide
or with very long tangs, and especially with concave base, would be
well adapted for hunting purposes. The wide stem would allow firm
attachment to a shaft, whether as an arrow or a spear, and at the same
time would be very difficult to withdraw from a wound. The shaft would
impede the flight of an animal pierced by the weapon, particularly in
weeds or bushes; though greater force would be required with these than
with the more slender points to make them effective.

[Illustration: FIG. 238.--Stemmed chipped flint.]

The type delineated in figure 238 is from Warren county, Ohio, and
the form is well represented also in Scioto and Miami valleys, Ohio;
western North Carolina; Kanawha valley; eastern Tennessee; southern
and southwestern Wisconsin; southeastern and southwestern Arkansas;
northeastern Kentucky; northeastern Alabama; and about Savannah,
Georgia.

[Illustration: FIG. 239.--Stemmed chipped flint, notched, very wide
stem.]

_T._ Convex edges; base straight, or slightly convex or concave,
with square corners, and nearly always polished; stem as wide as the
blade or wider. Some rather slender, others as wide as long. Very few
are beveled, except those from Savannah, all of which are thus made.
From three-fourths to 2¼ inches long. Found in eastern Tennessee;
Kanawha valley (including the specimen shown in figure 239); western
North Carolina; southern and southwestern Wisconsin; South Carolina;
southwestern Arkansas; Miami valley, Ohio; and in the vicinity of
Savannah.

[Illustration: FIG. 240.--Stemmed chipped flint, notched, very wide
stem.]

_U._ Edges usually straight, sometimes convex; base regularly concave,
or rounding off into a convex curve at the corners, and nearly always
polished. The stem in all is wider than the blade. Those from Savannah
are all beveled, and but few of them have polished bases. The type,
illustrated in figure 240, is from Kanawha valley, and others come from
Kanawha valley; southern Wisconsin; Scioto valley; eastern Tennessee;
southwestern Illinois; and Savannah, Georgia.

_V._ Edges convex, seldom straight, never concave; usually well
finished; base concave; notch worked in from the edge above the corner
so as to leave the upper portion of the tang parallel to the lower,
or base; corners square. Few are beveled. The length is from 1 to 4
inches, the width also varying considerably; some are widest at or
near the middle of the blade, others are as wide at base as at any
other part.

[Illustration: FIG. 241.--Stemmed chipped flint.]

The form is illustrated in figure 241 (Union county, Illinois). The
distribution is wide, including southwestern Illinois; northwestern
and southwestern Georgia and Savannah; northeastern Kentucky; Kanawha
valley; South Carolina; northwestern Alabama; eastern Tennessee;
eastern and southern Wisconsin; western and central North Carolina;
southeastern and southwestern Arkansas; Miami valley, Ohio; Keokuk,
Iowa; and Union county, Mississippi.

_W._ Edges usually convex, sometimes straight; notched in on the edges
above the corners; base concave; some slender, others broad. Somewhat
resembling the two preceding types, but more roughly made. From 1 to
4 inches long. Represented by material from western and central North
Carolina; Kanawha valley; eastern Tennessee; northeastern Alabama and
Coosa valley, as well as from Miami valley, Ohio.

[Illustration: FIG. 242.--Stemmed chipped flint, projecting shoulders.]

_X._ Small; very slender; convex edges, with wing-like barbs or
shoulders; stem slightly expanding by curved lines. This rather rare
type, shown in figure 242 (from Ouachita county, Arkansas), is known
from northeastern and southwestern Arkansas, as well as eastern
Tennessee, and Savannah, Georgia.

_Y._ Edges mostly straight, in a few convex; base straight, convex, or
concave, in some specimens of each being polished; notched in on the
edges just above the corners, notches usually slight; always widest at
base. A few, including all from Savannah, are serrated or beveled. Very
few are over an inch and a half long. They are nearly always thick. One
from Kanawha valley has the point worn perfectly smooth and the edges
polished half way to the base, showing use as a drill. Points of this
form would make the countersunk holes so common in gorgets and other
flat stones.

[Illustration: FIG. 243.--Stemmed chipped flint.]

This form is widely distributed. The type (figure 243) is from Lawrence
county, Ohio. Its range includes Miami and Scioto valleys, Ohio;
northwestern Georgia and Savannah; eastern Tennessee; Kanawha valley;
southwestern Illinois, and Brown county in the same state; western
North Carolina; Coosa valley, Alabama; southwestern Arkansas; South
Carolina; northeastern Kentucky; and eastern Wisconsin.

_Z._ Very rough finish; blade more or less worked by first chipping
(there being usually no secondary chipping) to convex edges; base
generally the natural surface of the nodule or pebble from which the
implement was made; notches worked in roughly on the edges. They were
probably knives or spears, or in some cases celts or chisels, though
none show polish. With these are placed a few that seem to be the
points of larger rough implements, broken and having notches worked in
the fragments. A typical form, shown in figure 244, is from Mississippi
county, Arkansas. It occurs also in northeastern Arkansas; Scioto
valley, Ohio; western Tennessee; southwestern Illinois; and Kanawha
valley, West Virginia.


PERFORATORS.

CHARACTER AND USES.

The implements variously classed by different writers as awls, drills,
needles, rimmers or reamers, and the like, seem to represent a graded
series, and as no distinction can be made in the different kinds, if,
indeed, there is any room for distinction, they are grouped under one
term, “perforators.”

[Illustration: FIG. 244.--Stemmed chipped flint, very rough.]

Very few of the specimens could be used as drills, as most of them
are too thin; only those with a rhomboidal or triangular section
would seem adapted to this purpose, and the majority even of these
seem too fragile. It is more probable that drilling was done with
a stick or horn, with sand as a cutting medium, except in the thin
tablets of slate or similar stone and in shells. The thicker flints
would answer very well for this purpose, and the countersunk holes
appear to indicate such an instrument. For sewing, bone would be
more easily worked, and better suited than flint. The double-pointed
slender specimens may have been used for bait-holders in fishing; bone
implements of a similar shape, with a hole drilled at the middle for
attaching a line, have been seen in use among the Indians of Florida.

Some such implement was no doubt used in the manner of a burin,
especially in making the fine lines on the ornamented shells or stones;
certain flints in the collection may have served such a purpose.

Lubbock considers it proved that the stone of which ornaments,
carved axes, etc., are made could be worked with flint, and that the
engraving on the Scotch rocks, even on granite, was executed with this
material;[174] and Bushmen are known to use triangular pieces of flint
for cutting figures in rocks.[175] Evans[176] observes that there are
five ways of making holes in stone, viz.: (1) Chiseling or picking, with
“picks,” “celts,” or “drills” of flint or other stone; (2) boring with
a solid borer, as wood, hard or soft, or horn with sand and water;
(3) grinding with a tubular grinder, as horn, cane, elder, etc., with
sand and water; (4) drilling with a stone drill, e.g., of flint or
sandstone; (5) drilling or punching with metal. It should be remembered
that there are no evidences of the use of any metal except copper for
economic purposes by the aborigines of the United States; and nearly
everything of this material seems to have been ornamental in character.
Bancroft says that the Nootka, in boring in wood, use a bird-bone
drill worked between the hands,[177] while according to Schumacher,
the Santa Barbara Indians chip out rough disks of shell, pierce them
with a flint drill, and enlarge the hole with a slender, round piece
of sandstone.[178] The Atlantic coast Indians drilled shell beads with
a nail stuck in a cane or stick, rolling the drill on their thighs
with the right hand, and holding the shell in the left;[179] and the
southern Indians, according to C. C. Jones, pierced shell beads with
heated copper drills.[180] Evans has found that ox-horn and sand make
good borers,[181] while low tribes on the Amazon make crystal tubes an
inch in diameter and up to 8 inches long by rubbing and drilling with a
flexible shoot of wild plantain, twilled between the hands, with sand
and water;[182] and Tylor expresses the opinion that such operations
are not the result of high mechanical skill, but merely of the most
simple and savage processes.[183]

[Illustration: FIG. 245.--Perforator, not stemmed.]


STEMLESS FORMS.

_A._ Base straight or nearly so; edges straight and parallel, sometimes
half the length from the base, thence with concave curve which is
reversed near the end to give a blunt point; these, usually the wider
ones, are always thin, and were probably knives. The smaller ones,
resembling the small triangular arrows except for the sharpened upper
end, may have been for arrowheads, though the sharp points would have
served well as awls or needles. Many of the smaller ones seem to be
made from small broken arrowheads; exemplified by the specimen from
Montgomery county, North Carolina, shown in figure 245. The collection
includes material from western and central North Carolina; eastern
Tennessee; Kanawha valley; northeastern Alabama; South Carolina;
Keokuk, Iowa; and Savannah, Georgia.

[Illustration: FIG. 246.--Perforator, not stemmed, double pointed.]

_B._ Slender, somewhat larger about the middle and tapering to a point
at each end, or regularly and gradually decreasing from base to point.
Some are undoubtedly arrowheads, as they are too blunt or too thin
to have been used for piercing. Others show marks of use which could
have been produced in no way except by drilling in stone. The specimen
illustrated in figure 246 (from Kanawha valley) shows this to a marked
degree, while that shown in figure 247 (from Nicholas county, Kentucky)
is without such indications. The distribution of this form is wide,
including Kanawha valley; northeastern Kentucky; southwestern Illinois;
southwestern Arkansas; southwestern Wisconsin; Coosa valley, Alabama;
northwestern and southwestern Georgia, and Savannah; eastern Tennessee;
and Scioto valley, Ohio.

[Illustration: FIG. 247.--Perforator, not stemmed, double pointed.]

[Illustration: FIG. 248.--Perforator, not stemmed, rough base.]

_C._ With the base very large in ratio to the point or piercer;
sometimes the entire implement is worked smooth or thin, again it is
the natural fragment or chip of stone entirely unworked except a point
flaked on one part or edge. The piercer varies from one-fourth of an
inch to two inches in length. It could have been utilized only as an
“awl” or “needle,” the base being held by the thumb and finger. This
variable form is represented in figure 248 (from Lawrence county,
Ohio). It comes from Scioto valley; Kanawha valley; western and central
North Carolina; northeastern Kentucky; Keokuk, Iowa; southwestern and
southeastern Arkansas; eastern Tennessee; and Savannah, Georgia.

[Illustration: FIG. 249.--Perforator, not stemmed, expanding base.]

[Illustration: FIG. 250.--Perforator, not stemmed, expanding base.]

_D._ Piercer thin and slender; base thin, expanding to a wing-like
projection on each side. Very few are strong enough to have been
used for drilling even in soft material, but they are excellent for
piercing leather or similar substances. The expanding wings would make
them good points for hunting and fishing arrows, as they would have
great penetrating power and be very difficult to extract from a wound,
while allowing very firm attachment to a shaft. The type, shown in
figure 249, is from Kanawha valley. Other specimens come from the same
locality, and also from southwestern Illinois, and Brown county in
the same state; eastern Tennessee; Keokuk, Iowa; Scioto valley, Ohio;
northeastern Kentucky; southern Wisconsin; and Savannah, Georgia.

_E._ With slight expansion at the base. These may be thick or thin,
wide or narrow, and, according to their different forms, might be
used as drills, piercers, or arrowheads. A good example (presented in
figure 250) is from Kanawha valley, West Virginia. It is found also in
northeastern Kentucky, northeastern and southeastern Arkansas; eastern
Tennessee; southwestern Illinois; and southwestern Wisconsin.

All of the foregoing perforators are without stems, unless the larger
portion left at the base may be considered as such.


STEMMED FORMS.

The form of the stem and shoulders among perforators is often the same
as in the stemmed arrowheads, etc., previously described.

[Illustration: FIG. 251.--Perforator, stemmed.]

_A._ Stem usually tapering; shoulder more or less defined; never
barbed; blade wide at the part next to the stem, tapering rapidly
by concave lines to a sharp point. Probably spearpoints or large
arrowheads with the blade worked to a point. The type, shown in figure
251, is from Kanawha valley.

[Illustration: FIG. 252.--Perforator, stemmed, very wide shoulders.]

_B._ Slender point; wide wings or shoulders; stem straight or nearly
so; the implement having the form of a cross. Some are less than an
inch long, and very delicately worked, while others reach 3 inches
in length, and are thick. Some from Savannah have very broad stems.
There is a good example (figure 252) from Ouachita county, Arkansas,
and others from southwestern Arkansas; western North Carolina; and
Savannah, Georgia.

[Illustration: FIG. 253.--Perforator, stemmed.]

[Illustration: FIG. 254.--Perforator, stemmed.]

_C._ Narrow and thick almost of a diamond or round section; stem
expanding or straight; with slight shoulders, sometimes slightly
barbed. Some of the thinner ones, probably arrows, have a lenticular
section; a few are triangular in section. This form is well suited for
drilling, and many of the specimens show marks of such use, especially
the one illustrated (figure 253), the edges of which are striated
almost the entire length. This is from Mason county, Kentucky; and
the distribution of the type includes Kanawha valley; Scioto valley,
Ohio; eastern Tennessee; northeastern Alabama; western and central
North Carolina; southeastern and northeastern Arkansas; Brown county,
Illinois; South Carolina; and northeastern Kentucky. Thus the type is
common and its geographic range broad.

_D._ Long, slender point; shoulders wide or slightly barbed; stem
straight, tapering, or expanding; edges straight or concave. Some
would make good piercers for soft material, but very few could be used
as drills. A majority would be good arrowheads. Some have the edges
smooth, but if this was caused by drilling it must have been done in
enlarging holes already made, since the implements so marked are very
thin. The faces of the blades show no polish or smoothness, such as
might result from use as knives. The specimen illustrated (figure 254)
is from Madison county, Alabama; others from northeastern Alabama and
Coosa valley; Scioto valley, Ohio; eastern Tennessee; western and
central North Carolina; southwestern Arkansas; Kanawha valley; and
Savannah, Georgia.

[Illustration: FIG. 255.--Perforator, stemmed, with cutting point.]

_E._ Stem may be of any form; wide shoulders; never barbed; point or
piercer narrow, well worked, with edges parallel its entire length, and
terminating in a cutting edge instead of a point. This form (shown in
figure 255) is found only in the collection from Savannah, Georgia.


BLUNT ARROWHEADS, OR “BUNTS.”

Certain arrowheads have the end opposite the base rounded or flattened
instead of pointed. Commonly, both faces are worked off equally, to
bring the edge opposite the middle line of the blade, though sometimes
it may be a little to one side. The stem and base are of any form found
in the common patterns of arrowheads. Few are barbed, though many
have shoulders. For the most part, they are probably made from the
ordinary spearpoints or arrowheads and knives that have had the points
broken off, though some seem to have been intentionally made this way
originally. A few are smooth or polished at the ends, as though used as
knives or scrapers; but most of them have no marks except such as would
result from being struck or shot against some hard substance; even this
being absent in many of them, as in the specimen represented in the
accompanying figure.

Jones says that crescent-shaped arrows were used by southern Indians
for shooting off birds’ heads,[184] and it is known that chisel-shape
arrows were much used during the Middle Ages.[185]

[Illustration: FIG. 256.--Blunt arrowhead, or “bunt”.]

This type of aboriginal implement or weapon is shown in figure 256,
representing a specimen from Savannah, Georgia. Other examples come
from eastern Tennessee; Kanawha valley; western North Carolina;
southern and southwestern Wisconsin; southwestern Illinois; Scioto
valley, Ohio; and Savannah, Georgia.


SCRAPERS.


STEMMED.

The same remarks as to form and method of making apply to stemmed
scrapers as to blunt arrows, except that the chipping of the end is
always from one face so as to produce a chisel edge. This edge is
frequently smooth or polished from use. They would answer very well for
smoothing down articles made of wood, or for cleaning hides in tanning;
they would also serve excellently for removing scales from fish, and as
they are usually abundant in the vicinity of good fishing places, they
were no doubt employed for this purpose.

[Illustration: FIG. 257.--Stemmed scraper.]

[Illustration: FIG. 258.--Stemmed scraper.]

The material in the Bureau collection is represented by the specimens
shown in figures 257 and 258, from Savannah, Georgia, and Dane county,
Wisconsin, respectively. Other examples come from southern Wisconsin;
southwestern Illinois; Kanawha valley, West Virginia; northeastern
Kentucky; Miami valley, Ohio; central North Carolina; eastern
Tennessee; and Savannah, Georgia.


STEMLESS.

A few quotations regarding the use and mode of manufacture of stemless
scrapers may be given:

According to Evans, they are made by laying a flake flat side up on a
stone, and chipping off around the edge with a hammer. The point struck
must rest directly on the under stone, and but a thin spall is struck
off at each blow.[186] Leidy observed that the Shoshoni by a quick blow
strike off a segment of a quartz bowlder in such a way as to form a
circular or oval implement flat on one side, convex on the other, which
is used as a scraper in dressing buffalo hides;[187] and according to
Knight the Australians obtain, in exactly the same way, specimens which
they use as axes.[188] Peale remarks that while hides are green they
are stretched on the ground and scraped with an instrument resembling
an adze;[189] and Dodge says more explicitly that when the stretched
skin has become hard and dry, the woman goes to work on it with an
adze-like instrument, with a short handle of wood or elkhorn tied on
with rawhide; holding this in one hand, she chips at the hardened skin,
cutting off a thin shaving at every blow.[190]

The scrapers of this class in the Bureau collection are as follows:

_A._ Chipped over the entire surface to the form of the ordinary celt,
except that the scraping edge is in the same plane with one face. Some
have a scraping edge at each end. In a few the flat or straight face is
chipped off slightly, bringing the edge toward the middleline; but this
was probably done after the implement had become broken or blunted from
use. When there is any polish, it is always on the flat face, showing
use as an adze, or, possibly, as a plane. Varying much in width, some
measuring almost the same in either direction, while others are more
like the “chisel” celts, though the position of the cutting edge shows
their use.

[Illustration: FIG. 259.--Stemless scraper, celt form.]

A typical specimen (figure 259) is from Jackson county, Illinois;
others come from Brown county and the southwestern part of the state
generally; from northeastern Kentucky; Keokuk, Iowa; southwestern
Wisconsin; eastern Tennessee; and central Ohio.

[Illustration: FIG. 260.--Stemless scraper, flake.]

_B._ Flakes or spalls, chipped always from the concave side of the
fragment. Some of the smaller specimens, usually those of somewhat
circular outline, are chipped nearly, or in some cases entirely, around
the edge. Figure 260 represents a specimen from Mason county, Kentucky.
Others come from northeastern Kentucky; eastern Tennessee; Holt county,
Missouri; Kanawha valley; southwestern Wisconsin; Miami valley, and
central Ohio; Coosa valley, Alabama; Union county, Mississippi; and
Savannah, Georgia.


CORES.

The generally accepted name “cores” is applied to the blocks from which
are struck off the flakes to be next described.

Dr. Gillespie[191] claimed that objects of this kind were made so
intentionally, and that the flakes are simply the refuse or waste
material. He gives six reasons for this belief, but an examination of
the objects themselves would show that he is in error. That some might
have been used as scrapers may be true, but very few are suited for
such work, and not one shows the least mark of wear that could result
from this use.

The specimens in the Bureau collection, with perhaps half a dozen
exceptions, are from the aboriginal quarries at Flint ridge, in Licking
county, Ohio, or of the material so abundant at that place.

[Illustration: FIG. 261.--Cores.]

All are small, few being of a size to furnish flakes over three inches
long. The flakes were undoubtedly struck off by means of stone hammers,
hundreds of which are to be found about the quarries, or removed by
pressure, many showing the bulb of percussion, others being perfectly
smooth on the flat face. Usually all the flakes were obtained from only
one side of the core until it became too small to work (figure 261).
Occasionally they were chipped from opposite sides, leaving the core of
a conical or cylindrical shape (as represented in figure 262).

[Illustration: FIG. 262.--Core.]

Cores and finely chipped implements of the Flint ridge stone have been
taken from the mounds in Kanawha valley, West Virginia, and Scioto
valley, Ohio, showing that the mound-builders are to be credited with
at least a part of the great amount of work done in those localities;
but it seems a mistake to say, as some authors have done, that the
“turtlebacks” found in caches in southern Illinois are from the same
source, as the stone is entirely different, and occurs abundantly in
the vicinity in which the specimens are found.


FLAKES.

The use to which were put the narrow, thin flakes so abundantly found
in many parts of the world has caused some discussion. Schoolcraft
says that the Dakota bleed patients by scarifying with these flakes;
or sometimes one is fixed into the end of a piece of wood, held over
a vein, and driven in as far as the wood will let it go,[192] the use
being similar to that of the modern fleam. Harpoons in the Kurile
islands are made of bone, with a deep groove along each side; in
these grooves thin and sharp flat flakes are fastened with gum.[193]
According to Evans, similar flakes were used for scraping,[194] just as
broken glass is used among modern woodworkers. Flakes have been found
in the Swiss lakes in wooden handles in the fashion of Eskimo knives;
also in Australia with skin wrapped around one end to protect the
hand.[195]

All the flakes in the Bureau collection are small, few of them being
over three inches long. They are found elsewhere with a length of over
a foot; but the nature of the flint occurring in the United States is
seldom such as to allow flakes to be struck off equaling in size those
found in Europe.

Evans says that blows with a pebble will form just such flakes as those
produced by an iron hammer; the blows must, however, be delivered in
exactly the right spot and with the proper force. Cores sometimes
show markings of hammers when struck too near the edge. Flakes can
be produced by using a pebble as a set or punch and striking it with
a stone. The use of a set was probably the exception rather than the
rule, for great precision may be obtained simply with a hammer held in
the hand. The Eskimo use a hammer set in a handle to strike off flakes,
or strike them off by slight taps with a hammer of jade, oval in shape,
about 2 by 3 inches, and secured to a bone handle with sinew.[196]

According to Tylor, the Peruvian Indians work obsidian by laying a
bone wedge on the surface of a piece and tapping it until the stone
cracks;[197] while the Indians of Mexico hold a piece of obsidian 6
or 8 inches long between their feet, then holding the crosspiece of a
T-shape stick against the breast they place the other end against the
stone and force off a piece by pressure.[198]

Nilsson says that the Eskimo set a point of deer horn into a handle of
ivory and drive off splinters from the chert,[199] and Redding saw a
Cloud river Indian make flakes thus: Holding a piece of obsidian in his
hand, he placed the straight edge of a piece of split deer horn, four
inches long and half an inch in diameter, at a distance from the edge
of the stone equal to the thickness of the arrow he wished to make;
then striking the other end with a stone he drove off a flake.[200]
Schumacher observed that the Klamath Indians heat a stone and break it
into fragments at a single blow.[201]

According to Stevens the Shasta Indian lays a stone anvil on his knee,
and holding on the anvil the stone which he is working,[202] strikes
off a flake one-fourth of an inch thick with a stone hammer; but Powers
says the Shasta Indians heat a stone and allow it to cool slowly, which
splits it into flakes,[203] and Bancroft that they place an obsidian
pebble on an anvil of stone and split it with an agate chisel to the
required size.[204] The Shoshoni or Snake Indians of the northwest work
in the same way,[205] and certain California Indians strike off flakes
from a mass of agate, jasper, or chalcedony with a stone hammer,[206]
while the Apache break a bowlder of hornstone with a heavy stone hammer
having a twisted withe for a handle.[207]

Schoolcraft says experience has taught the Indians that some varieties
of hornstone (flint) are less easily fractured than others, and that
the conchoidal form is found best in softer varieties; also that
weathered fragments are managed with greater difficulty than are those
freshly quarried.[208]

Evans points out that in making gunflints much depends upon the
condition of the stone as regards the moisture it contains, those that
have been too long exposed on the surface becoming intractable, and
there is also a difficulty in working those that are too moist. Some of
the workers, however, say that a flint which has been some time exposed
to the air is harder than one recently dug, yet it works equally
well.[209]

It is related that in former times white hunters in Ohio and Kentucky,
when they needed a gunflint, would select a fragment from the surface,
where practicable, and soak it in oil for several weeks “to make it
tough;” otherwise it would shatter to fragments when struck.

[Illustration: FIG. 263.--Flake, chipped for scraper.]

Frequently the large flat spalls knocked from blocks or chunks of flint
in shaping them, or in obtaining pieces to work, are of such form that
very little additional labor converts them into serviceable scrapers,
knives, spears, or arrows. A number of such pieces are found in the
collection. These, however, are not considered in the flakes now to be
described:

_A._ Edges bluntly chipped (from the concave side) for use as scrapers.
They may or may not have notches for attachment to a handle. An example
from Kanawha valley, West Virginia, is shown in figure 263. Others come
from southwestern Arkansas; Kanawha valley; Miami and Scioto valleys,
and central Ohio.

_B._ Trimmed only enough to give a general leaf shape, the faces being
left unchanged; for use as knives or arrowheads, most of them being
exceedingly small; notched, or with continuous edges. This form is
represented by the specimen from Licking county, Ohio, illustrated in
figure 264. It is found in central Ohio; northeastern Arkansas; Coosa
valley, Alabama; eastern Tennessee; and western North Carolina.

[Illustration: FIG. 264.--Flake, chipped for knife or arrow head.]

_C._ Long, slender, with three or four facets on one face, caused by
others having been struck off above. The edges are as keen as broken
glass, and the points are usually quite sharp. In a great many the
points have been worked off by fine, secondary chipping. When this is
done, it is always at the end which was struck in knocking off the
flake. In some cases it may be due to the shattering effects of the
blow; but in many specimens the evidence is plain that it was done
afterward for the purpose of making a sharper point. Some flakes of
this kind have notches for attachment to a shaft, probably for arrows;
such specimens, however, are without the secondary chipping, and the
notches are at the end opposite the one struck.

[Illustration: FIG. 265.--Flake, slender, probably for lancet.]

A good example, shown in figure 265, is from Kanawha valley, and there
are others from the same locality, as well as from Miami valley, Ohio;
and Union county, Mississippi.


MISCELLANEOUS FORMS.

From the Savannah collection there are several forms of chipped
flints which, while resembling the foregoing in various ways, present
characters which make it necessary to place them by themselves;
and while containing a majority of the types described above, this
collection has many that have no counterpart from any other section
visited by the Bureau collectors. Some of these unique specimens of
aboriginal art are among the following:

[Illustration: FIG. 266.--Stemmed chipped flint.]

_A._ Edges double curved, expanding to a wide point at the shoulder;
stem straight or tapering; base either straight or slightly convex. The
type of the group is quite well represented in figure 266.

_B._ Edges concave; base and stem straight; very wide projections or
wings at the shoulders, going in by straight or curved lines to the
stem (illustrated in figure 267).

_C._ Edges concave, changing to convex at the shoulders, and curving
around to the stem, which is straight or slightly expanding; base
straight or very slightly convex (figure 268).

_D._ Convex edges, widening into greatly expanding barbs; base
straight; stem expanding by straight lines (figure 269).

[Illustration: FIG. 267.--Stemmed chipped flint, winged.]

[Illustration: FIG. 268.--Stemmed chipped flint.]

_E._ Broad; double-curved edges; notched in from the base, and barbs
worked so as to be narrowest near the blade, with the ends straight or
round; stem expanding by straight lines; base straight (figure 270).

_F._ Edges nearly straight to the barbs, which are worked off to a
point toward the stem; base convex and wide; stem expanding by curved
lines (figure 271).

[Illustration: FIG. 269.--Stemmed chipped flint, barbed.]

[Illustration: FIG. 270.--Stemmed chipped flint, broad.]

_G._ Rather slender; base nearly straight, either convex or concave;
stem rapidly expanding; notched in from the corners, making long
slender barbs which project beyond the line of the edges (as
illustrated in figure 272). The same form comes from Dougherty county,
southwestern Georgia, as well as from Savannah.

_H._ Straight or convex edges; base straight or slightly convex; stem
to one side of the center, leaving one barb longer and larger than the
other (figure 273).

_I._ Triangular, notched in from the bottom; barbs extend down even
with the base, or the base is sometimes worked back, leaving it shorter
than the barbs; some are beveled (figure 274). The same form is found
in southwestern Georgia.

_J._ Broad; straight edges; base straight or concave; stem straight or
expanding; long, rounded barbs (figure 275).

[Illustration: FIG. 271.--Stemmed chipped flint.]

[Illustration: FIG. 272.--Stemmed chipped flint, slender.]

_K._ From Arkansas county, Arkansas, there is an implement of basanite
or black jasper, of the general type of figure 180 or 182, the point
being broken off. The base has been worked down to a sharp edge, the
stem highly polished on both faces. This polish does not extend to
the faces of the blade, but both edges are rubbed smooth so far as
they now extend. Whether the implement was originally pointed and used
as a knife or spear, this sharp edge being given the stem after it
was broken, or whether it was so made in the first place, can not be
determined. Like the various forms with polished base, the specimen
seems to indicate a manner of mounting or of use the reverse of what
would be expected. It is shown in figure 276.

[Illustration: FIG. 273.--Stemmed chipped flint.]

[Illustration: FIG. 274.--Stemmed chipped flint, triangular.]

[Illustration: FIG. 275.--Stemmed chipped flint.]

Figure 277 shows an implement from Licking county, Ohio, somewhat of
the form of figure 205, except that it is wider and much thinner. It is
worn smooth on each edge for ¾ inch from the point, the point itself
being quite blunt. This probably results from use as a knife or drill;
though, if due to the latter cause, the material on which it was used
must have been quite soft or thin. Similar wear is seen on implements
from the same locality of the form of figures 176 and 223, but this
article is smaller than those represented by the figures.

[Illustration: FIG. 276.--Chipped flint, with sharp-edged stem.]

[Illustration: FIG. 277.--Stemmed chipped flint, point blunted from
use.]

[Illustration: FIG. 278.--Stemmed chipped flint.]

In figure 278 is shown a small knife of the pattern so common in
specimens mounted in antlers, from the Swiss lake dwellings. In outline
it resembles the arrowheads having straight edges and a convex base;
but the side view shows the purpose for which it was made. Similar
pieces are found throughout central Ohio, and along Ohio river from the
Kanawha to the Miami.


NOTES ON BEVELED FLINTS.

In the beveled flints the side-chipping producing the bevel is always
to the left, as may be seen in figure 235; only one exception to this
has been found. It has been supposed that this is done to give a rotary
motion to an arrow. Morgan[210] says that “arrowheads are occasionally
found with a twist to make the arrow revolve in its flight;” and the
same statement has often been made by others. It may be objected,
however, that very few of these beveled specimens are small enough
for arrowheads; and modern archers have shown that the shape does not
affect the flight of the arrow.

Schoolcraft,[211] Powers,[212] Morgan,[213] and Cheever[214] say that
the modern Indians sometimes have a spiral arrangement of the feathers
on their arrow to produce a rotary motion or “rifling.” This rotary
motion is supposed to keep the arrow in a straight course, as without
it a deviation from the direct line would tend constantly to increase.
But as showing that the rotary motion is not always desired, Dodge says
that sometimes the blade, in regard to the string notch, is set so as
to be perpendicular, to go in between the ribs of game; again, so as to
be horizontal, to go in between the ribs of an enemy.[215]

The beveled flints were probably used for skinning game, as they are
better fitted for this than for anything else, and would serve such
purpose better than almost any other form of the smaller chipped
flints. The bevel is such as would be necessary if the implement were
held in the right hand and pulled toward the user.

There are a great many specimens in the collection, both in the ground
or pecked and in the chipped implements, which can not be classified
with any of the objects herein described; but they are to be considered
as due rather to individual whims than as representative of a type.

FOOTNOTES:

[1] Anahuac, p. 101.

[2] Ibid., p. 98.

[3] Dawson, Sir William; Fossil Men, p. 121.

[4] Smithsonian Report for 1884, p. 741.

[5] Ibid., p. 748.

[6] Tylor; Early History of Mankind, p. 169.

[7] Lubbock, Sir John; Prehistoric Times, p. 569.

[8] Early History of Mankind, p. 203.

[9] Abbott, C. C., in American Naturalist, vol. X, p. 494.

[10] Perkins; Ibid, vol. XIII, p. 738.

[11] Adair; History of American Indians, p 405.

[12] Long, S. H.; Expedition to the Rocky Mountains, p. 211.

[13] Knight, E. H.; Smithsonian Report for 1879, p. 242.

[14] Wood, J. G.; Natural History of Mankind, p. 200.

[15] Morgan, L. H.; League of the Iroquois, p. 358.

[16] Beverly, Robt.; History of Virginia, 1722, p. 198.

[17] Wyth, John; Graphic Sketches, part I, plate 14.

[18] Catlin, Geo.; Last Rambles Among the Indians, pp. 100-101.

[19] Mohr, Smithsonian Report for 1881, p. 618; Barber, Amer. Nat.,
vol. XII, p. 403; McGuire, Ibid., vol. XVII, p. 587; Walker, Science,
vol. IX, p. 10; Schumacher, Eleventh Annual Report of Peabody Museum,
p. 263.

[20] Dawson, J. W.; Fossil Men, p. 16.

[21] Ibid., p. 132.

[22] Morgan, L. H.; League of the Iroquois, p. 358.

[23] Stevens, E. T.; Flint Chips, p. 174.

[24] Evans, John; Stone Implements, p. 218.

[25] Ibid., p. 227.

[26] Dodge, R. I.; Wild Indians, p. 254. Schoolcraft, H. R.; Indian
Tribes, vol. IV, p. 107. Catlin, Geo.; North American Indians, vol. I,
p. 416.

[27] Powers, Stephen; Contributions to N. A. Ethnology, vol. III, p.
433.

[28] Stone Implements, p. 218.

[29] Ibid., p. 213.

[30] Adair, James; American Indians, p. 409.

[31] Lawson, John; History of North Carolina, p. 53.

[32] Antiquities of the Southern Indians, pp. 315-320.

[33] Fossil Men and Their Modern Representatives, p. 112.

[34] Dodge; Our Wild Indians, plate I, fig. 3.

[35] Lewis and Clarke; Travels, p. 425.

[36] Powers; Contributions to N. A. Ethnology, vol. III, p. 52.

[37] Ibid., p. 433.

[38] Dawson; Fossil Men, p. 119.

[39] Stevens; Flint Chips, p. 95.

[40] League of the Iroquois, p. 359.

[41] Carver, Jonathan; Travels in North America, p. 191.

[42] Report to Regents of the Univ. of New York, vol. II, p. 86.

[43] Schoolcraft; Notes on the Iroquois, p. 239.

[44] Schumacher; 11th Ann. Rept. Peabody Museum, p. 264.

[45] Powers; Contributions to N. A. Eth. vol. III, p. 377.

[46] Flint Chips, p. 95.

[47] Abbott, C. C.; Primitive Industry, chap. 28.

[48] Jones, C. C.; Antiquities of the Southern Indians, p. 338.

[49] Nilsson, S.; Stone Age, p. 25.

[50] Thatcher, B. B.; Indian Traits, vol. I, p. 70.

[51] Jones; Antiquities of the Southern Indians, p. 338.

[52] Amer. Naturalist, vol. XX, p. 574.

[53] Hayden Surv., Bull. 3, 1877, p. 41; also 11th Ann. Rept. Peabody
Museum, p. 265.

[54] Primitive Industry, p. 244.

[55] Stevens; Flint Chips, p. 95.

[56] Ibid., p. 96. Morgan; League of the Iroquois, p. 381.

[57] Stevens; Flint Chips, p. 499.

[58] Dale, L.; in Journal of Anth. Inst. of Great Br. and Ireland, vol.
I, p. 347.

[59] Layard, E. L.; in ibid., appendix, c.

[60] Griesbach, C. L.; in ibid., p. cliv.

[61] W. D. Gooch says they were used as club heads by the predecessors
of the Bushmen, who now use them as diggers; ibid., vol. XI, p. 128.

[62] Knight, E. H.; in Smithsonian Report for 1879, p. 232.

[63] Stone Implements, p. 194.

[64] Bul. Bur. of Eth., “Perforated Stones from California.”

[65] Adair; American Indians, p. 402.

[66] Lawson; History of North Carolina, p. 98.

[67] Morgan; League of the Iroquois, p. 299.

[68] Irving, J. T.; Indian Sketches, vol. II, p. 142.

[69] Cremony, J. C.; Life Among the Apaches, p. 302.

[70] Matthews, W.; Smithsonian Report for 1884, p. 814.

[71] Report of Pacific Railroad Survey, vol. III, p. 114.

[72] Long; Expedition to Rocky Mountains, vol. I, p. 205.

[73] Brackinridge, H. M.; Views of Louisiana, p. 256.

[74] Catlin; North American Indians, vol. I, p. 132.

[75] Schumacher; in Twelfth Annual Report Peabody Museum, p. 622.

[76] Lubbock; Prehistoric Times, p. 648.

[77] Im Thurn in Jour. Anth. Inst. Gt. Br. and Ireland, vol. II, p. 647.

[78] Stone Implements, p. 218.

[79] Ibid., p. 227.

[80] For any or all of which purposes they may have been used in the
course of their manufacture.

[81] Captivity Among the Indians, Lexington, 1799; reprinted,
Cincinnati, 1870, p. 36.

[82] Eells, Myron; Hayden Surv., Bull. 3, 1877, p. 81.

[83] Primitive Industry, p. 229.

[84] Flint Chips, p. 581.

[85] Henshaw in Amer. Jour. Arch., vol. I, pp. 105-114.

[86] Pear-shaped stones with the smaller end cut squarely off are
frequent in Georgia; they are about the size of turkey eggs. Jones;
Antiq. Southern Indians, p. 372.

[87] Stone Age, p. 215.

[88] Abbott; Primitive Industry, p. 408.

[89] American Indians, p. 48.

[90] Stone Age, p. 83.

[91] Im Thurn in Jour. Anth. Inst. Gt. Br. and Ird., vol. XI. p. 445.

[92] Powers; Contributions to N.A. Eth., vol. III, pp. 52 and 79.

[93] Chase; MS. Rept. on Shell Mounds of Oregon.

[94] Dodge; Our Wild Indians, p. 131.

[95] Abbott; Primitive Industry, p. 373.

[96] Brickell, John; Nat. History of N.C., p. 317.

[97] Wyth; Graphic Sketches, part I, plate 8.

[98] Schoolcraft in Trans. Am. Eth. Soc., vol. I, p.401, pl. I.

[99] I am informed by Prof. Cyrus Thomas that he noticed in the
collection of Mr. Neff. Gambier, Ohio, a “boat-shape stone” attached to
the underside of a stone pipe, which the owner informed him was thus
attached when found.

[100] Evans; Stone Implements, p. 383.

[101] Amer. Antiquarian, vol. II, p. 100.

[102] Expl. in the Valley of the Amazon, vol. II, p. 74.

[103] Indian Tribes, vol. I, p. 90.

[104] Amer. Naturalist, vol. VII, p. 180.

[105] Flint Chips, p. 478.

[106] MS. Rept. on Shell Mounds of Oregon.

[107] Some perforated stones that will not come under any of these
heads are here noted separately under the National Museum numbers:

131614. An elliptical piece of steatite, with notches at each end for
suspension, “tallies” all around the edge, and four holes on the longer
axis.--Bradley county, Tennessee.

62879. A steatite ornament, shape like a bird’s head.--Jefferson
county, Tennessee.

131856. A short, wedge-shape ornament of barite, drilled at the larger
end.--Loudon county, Tennessee; also a similar but much larger ornament
of indurated red clay, possibly catlinite, from a mound in the same
county, represented in figure 149. The edges of the holes are much worn
by a cord.

90847. A small ellipsoidal steatite bead, with several deep incisions
around the edge.--Kanawha valley, West Virginia.

116335. A small marble bead; form like the rim of a bottle
mouth.--Bradley county, Tennessee.

113943. Three small pendants of cannel coal. One is in shape like
the keystone of an arch, with hole at smaller end; the other two
are apparently in imitation of a bear’s tusk.--Kanawha valley, West
Virginia.

91761. A limestone celt, 6½ inches long, either much weathered since
made or else never highly polished, with a large hole drilled in from
both sides at the center.--Bartow county, Georgia.

116067. A sandstone celt, with a hole drilled near one corner at the
top.--Loudon county, Tennessee.

97764. A large polished piece of steatite, curved from end to end, or
claw-shaped. One end is pointed; the other blunt and rounded, with a
hole drilled through it.--Caldwell county, North Carolina.

[108] Gillman, H.; in Smithsonian Report for 1873, p. 371.

[109] Primitive Industry, p. 371.

[110] Antiq. of the Southern Indians, p. 30.

[111] Schoolcraft; Indian Tribes, vol. I p. 212.

[112] Schumacher, Paul; Hayden Surv., Bull. 3, 1877, p. 548.

[113] Indian Tribes, vol. I, p. 253.

[114] Contributions to N.A. Eth., vol. III, p. 426.

[115] Native Races, vol. I, p. 589.

[116] Ibid., p. 566.

[117] Antiquities of the Southern Indians, pp. 362-364.

[118] Hoffman, W. J.; "The Midē´wiwin of the Ojibwa." Seventh Annual
Rep. Bur. Eth., 1885-86, p. 278, pl. XVIII.

[119] Amer. Antiquarian, vol. II, p. 154.

[120] Peabody Mus., 11th Ann. Rept., p. 268.

[121] Dodge; Our Wild Indians, p. 130.

[122] De Forest, J. W.; History of Indians of Conn., p. 5.

[123] Peabody Mus., 11th Ann. Rept., p. 271.

[124] Fossil Men, p. 125.

[125] Fossil Men., p. 119.

[126] Proc. A. A. A. S., vol. XXXI, p. 592.

[127] Since this was written several thousand specimens have been found
in a small mound near Chillicothe, Ohio. The nearest point at which
similar material is known to exist is between Corydon and Leavenworth,
Indiana.

[128] Flint Chips, p. 442.

[129] Amer. Naturalist, vol. IV, p. 140.

[130] Last Rambles Among the Indians, p. 187.

[131] Journal Anth. Ins. Gt. Br. and Ird., vol XI, p. 447.

[132] Anthropology, p. 245.

[133] Jewitt, Llewellyn; Grave-mounds and their Contents, p. 121.

[134] Stone Implements, p. 374.

[135] Op. cit., p. 245.

[136] Stone Implements, p. 36 (from Craveri).

[137] Stone Implements, p. 36 (from De Pourtales).

[138] Ibid., p. 35 (from Belcher).

[139] Ibid., p. 38.

[140] Crook in Smithsonian Report for 1871, p. 420.

[141] Catlin; Last Rambles, pp. 184, 185.

[142] Ibid., p. 290.

[143] Stevens; Flint Chips, p. 81 (from Belcher).

[144] Ibid., p. 84.

[145] Powers in Contributions to N. A. Eth., vol. III, p. 104.

[146] Ibid., p 374.

[147] Bancroft; Native Races, vol. I, p. 342.

[148] Schoolcraft; Indian Tribes, vol. I, p. 212.

[149] Beckwith in Rep. Pac. R. R. Survey, vol. II, p. 43.

[150] History of Virginia.

[151] Redding in Amer. Naturalist, vol. XIII, p. 665.

[152] Cheever in ibid., vol. IV, p. 139.

[153] Cited by Stevens, Flint Chips, p. 78.

[154] Hayden Survey, Bull. 3, 1877, p. 547.

[155] MS. account of the Shell Mounds of Oregon.

[156] Prehistoric America, p. 170.

[157] Smithsonian Report for 1871, p. 420.

[158] MS. Shell Mounds of Oregon.

[159] Flint Chips, p. 77.

[160] Prehistoric Times, p. 106 (from Dodge and Blackmore).

[161] Contributions to N. A. Eth., vol. III, p. 104.

[162] History of Mankind, p. 188.

[163] Adair; American Indians, p. 403.

[164] Adair; American Indians, p. 410.

[165] Cheever in Amer. Naturalist, vol. IV, p. 139.

[166] The section below shows this more plainly.

[167] Amer. Naturalist, vol. X, p. 116.

[168] Indian Tribes, vol. II, p. 74, fig. 5.

[169] Nat. Hist, of N. C., p. 318.

[170] League of the Iroquois, p. 359.

[171] Anahuac, p. 332.

[172] Bourke, John G.; Snake Dance of the Moquis, p. 251. See also
Dodge; Our Wild Indians, plate 5.

[173] Long; Exp. to Rocky Mountains, vol. I, p. 290. Dodge; Our Wild
Indians, p. 418.

[174] Prehistoric Times, p. 122.

[175] Holub, E., in Jour. Anth. Inst. Gt. Br. and Ird., vol. X, p. 460.

[176] Stone Implements, p. 48.

[177] Native Races, vol. I, p. 189.

[178] Hayden Surv., Bul. 3, 1877, p. 43.

[179] Brickell; Nat. Hist. of N. C., p. 339.

[180] Antiq. of the Southern Indians, p. 230.

[181] Stone Implements, p. 46.

[182] Stevens; Flint Chips, p. 96. Tylor; Early History of Mankind, p.
188.

[183] It would seem that in using a wood or horn drill, water would be
a disadvantage, as the drill would swell and wear rapidly away when
wet, thus choking the bore. The sand also would be forced into the
drill instead of sticking to its surface, thus being less effective.

[184] Quoted by Dawson; Fossil Men, p. 124.

[185] Evans; Stone Implements, p. 353.

[186] Stone Implements.

[187] Hayden Survey, 1872, p. 653.

[188] Smithsonian Report for 1879, p. 236.

[189] Ibid, 1870, p. 390.

[190] Our Wild Indians, p. 256.

[191] Gillespie, Dr. W.; Jour. Anth. Inst. Gt. Br. and Ird., vol. VI,
p. 260.

[192] Indian Tribes, vol I, p. 253.

[193] Nilsson; Stone Age, p. 46.

[194] Stone Implements, p. 256.

[195] Stone Implements, p. 263.

[196] Ibid., pp. 20, 23, and 35.

[197] Anahuac, p. 99.

[198] Ibid, pp. 231, 232 (note).

[199] Stone Age, p. 261 (note).

[200] Amer. Naturalist, vol. XIII, p. 665.

[201] Hayden Survey, Bul. 3, 1877, p. 547.

[202] Flint Chips, p. 77.

[203] Contributions to N. A. Eth., vol. III, p. 104.

[204] Native Races, vol. I, p. 342.

[205] Schoolcraft; Indian Tribes, vol. I, p. 212.

[206] Stevens; Flint Chips, p. 78 (from Powers).

[207] Catlin; Last Rambles Among the Indians, p. 187.

[208] Indian Tribes, vol. III, p. 467.

[209] Stone Implements, p. 17.

[210] League of the Iroquois, p. 358.

[211] Indian Tribes, vol. I, p. 213.

[212] Cont. to N. A. Eth., vol. III, p. 52.

[213] League of the Iroquois, pp. 306, 308.

[214] Amer. Nat., vol. IV, p. 140.

[215] Our Wild Indians, p. 418.


[Transcriber’s Note:

Inconsistent spelling and hyphenation are as in the original.]