Produced by The Online Distributed Proofreading Team at
http://www.pgdp.net (This file was produced from images
generously made available by The Internet Archive/American
Libraries.)









  Paper and Printing Recipes


  A Handy Volume of Practical Recipes,
  Concerning the Every-Day Business of
  Stationers, Printers, Binders, and the
  Kindred Trades.


  PUBLISHED BY
  J. SAWTELLE FORD,
  _OFFICE OF "THE STATIONER AND PRINTER,"_
  CHICAGO.



  Entered according to the Act of Congress, in the year 1883, by
  J. SAWTELLE FORD,
  In the Office of the Librarian at Washington.




GLIMPSE OF CONTENTS.


This Volume has nearly =Two Hundred= valuable Recipes for Stationers,
Printers, Bookbinders, etc. These Recipes are thoroughly practical, and
such as come up in every day's work. They have been gathered from many
sources, and are endorsed by the best workmen of the United States and
Europe.




INDEX TO RECIPES.


WRITING INKS.

  Removing Writing Ink from Paper                              1
  White Ink                                                    3
  Purple Hektograph Ink                                        3
  A Dark Red Indelible Ink                                     4
  Making Carmine                                               4
  Violet Ink                                                   5
  Indelible Ink                                                5
  To make Black Ink                                            6
  An Ink which cannot be Erased                                6
  Copying Ink to be used without Press or Water                3
  A Cardinal Ink                                               7
  A Portable Ink                                              28
  Indelible India Ink                                         28
  Copying Inks                                                29
  Invisible Writing                                           68


PRINTING INKS.

  To Prevent Colored Inks from becoming Hard                  81
  To keep Colored Inks from Skinning                          81
  To Preserve Colored Inks                                    82
  How to Brighten Common Qualities of Colored Inks            83
  A Good Dryer                                                79
  A Quick Dryer                                               61
  Improved Dryer for Printing Ink                             66
  To take Printer's Ink out of Silk                           17
  Red Printing Ink                                            68
  Black Printing Ink                                          69
  Colors for Printing Ink                                     71
  Principal Colors of Gold for Grinding                       45


MARKING INKS, ETC.

  Ink for Rubber Stamps                                        7
  Marking Ink                                                 10
  Black Ink for Stencils                                       6
  Stencil Ink                                                  2
  Blue Marking Ink for White Goods                            10


REMOVAL OF INK STAINS, ETC.

  To Remove Writing Ink from Paper                             1
  To Remove Aniline Ink from the Hands                         8
  To take Ink Stains from the Hands                            9
  To Remove Grease Spots from Paper                           13
  How to Remove Colored Inks                                  81
  Paper for taking out Ink Stains                             14
  To Remove Ruling Ink Stains from Fingers                    17
  To Remove Ink Spots                                         19
  To Remove Oil Marks from Paper                              20
  To Remove Ink Stains from Mahogany                          20


CARE OF BOOKS.

  Care of Books                                               78
  To Destroy Book Worms                                       77
  How to Prevent Mildew on Books                              78


GLUES, PASTES, MUCILAGE, ETC.

  Solid Pocket Glue                                           20
  To Test Glue                                                21
  Book-Binder's Glue                                          22
  Cement for Glass                                            22
  Postage Stamp Mucilage                                      26
  To keep Mucilage Fresh                                      26
  Mucilage                                                    27
  Mucilage for Pasteboard                                     27
  Cement for Labels                                           23
  A Colorless Cement                                          23
  A Cement that will Resist the Damp                          24
  To make Glue Water-proof                                    24
  Two Glue Receipts                                           25
  A Good Paster                                               29
  A Paste which will not Spoil                                29
  A Silver Solder                                             30
  An Article for Labeling Bottles                              8
  For Making Dextrine                                         70


PRINTERS' VARNISHES.

  A Varnish for Color Prints                                  82
  Printers' Varnish                                           83
  A Varnish for Paper                                         13
  A Transparent Paper Varnish                                 53


COLOR AND GOLD LEAF PRINTING.

  To Fix Bronze Colors on Glass                               77
  A Bronze or Changeable Hue                                  80
  Gold Leaf Printing                                          80
  Inking Surfaces for Color Work                              82
  Colors for Holding Bronze                                    2
  Colors for Printing                                         51


ELECTROTYPING.

  To Prevent Electrotype Blocks from Warping                  69
  Electrotyping on China                                      42
  Electrotyping Handwriting                                   35


WOOD CUTS AND ENGRAVING.

  Care of Wood Cuts                                           75
  To Produce Engraving or Types for Printing by Photography   15
  Different kinds of Engraving                                36
  Care of Wood Type                                           38
  To Restore the Original Whiteness of Copper plate, Wood
    Engravings, etc.                                          42
  To Transfer Engraving to Mother of Pearl                    39
  An Improved Process of Photo-Engraving                      31
  To Prevent Warping in Blocks and Wood                       61
  Stereotyping Wood Cuts                                      46


PAPER.

  Waterproof Paper                                            56
  How to Size poor Drawing Paper                              56
  Paper Soft and Flexible                                     19
  Incombustible Writing and Printing Paper                    17
  Blue-Black Writing Paper                                    10
  Electric Paper                                              30
  Tinning Paper and Cloth                                     77
  Gummed Paper from Cockling                                  57
  Qualities of Good Paper                                     14
  Impermeable Paper                                           53
  Aniline Ink Paper                                           16
  To make Paper Fine and Water-proof                          52
  To Bleach Sheepskin Parchment White                         50
  Carbon Paper                                                54
  Luminous Paper                                              54
  Sizes and Weights of Drawing Paper                          55
  Bronzed Paper                                               55
  Transparent Drawing Paper                                   56
  Paper for Labels                                            14
  To Split a Sheet of Paper                                   15
  Photo-Lithographic Transfer Paper                           32


MISCELLANEOUS.

  An Ink Restorer                                              2
  To Obtain a Bright and Lasting Red Edge                     41
  To Mount Chromos                                            53
  Sealing Wax                                                 69
  Photo Prints on Glass                                       46
  Enamel for Fine Cards                                       35
  To Bend a Rule                                              67
  To Make a Corroded Pen                                      31
  To Restore the Lustre of Morocco Leather                    41
  Non-erasible Pencil Marks                                   41
  Copy Drawing in Color                                       57
  Black Paint for Blackboards                                 33
  To Preserve Pencil Sketches                                 37
  Treatment of India Ink Drawings                              9
  To Clean Gilt Frames                                        67
  Cleaning New Machinery                                      67
  Washing Forms                                               59
  A Hardening Gloss for Inks                                  84
  A Modeling Material                                         84
  Leaf Copying                                                84
  Usual Sizes and Weights of Book papers                      86
  Usual Sizes and Weights Colored Print or Poster             86
  Painting on Ebonized Wood                                   43
  To Clean Steel Pens                                         33
  To Clean a Chamois Skin                                     12
  Dryer for Ruling Inks                                       85
  Usual Sizes and Weights of News Printing Paper              86
  Usual Sizes of Flat and Ledger Papers                       87
  Size of Newspaper Sheets and Number of Columns              85


STATIONERS' WINDOWS.

  Stationers' Windows                                         33
  Hints on Dressing the Store Windows                         12
  To Prevent Window Steaming                                  18


GILDING.

  For Cheaply Gilding Bronze, etc.                            11
  Electro-Gilding in Colors                                   19
  How Gilding is Done                                         43
  Gilding with Gold Leaf                                      46
  Gilding on Wood                                             47
  Gilding in Oil                                              48


METALS.

  Coloring Metals                                             11
  Copper Plating on Zinc                                      38
  An Alloy for Glass or Metal                                 30
  Writings on Metals                                          45


TYPE.

  Laying Type                                                 76
  Metal for Stereotyping                                      40
  Effect of Petroleum Oil on Wood Type                        79
  Remedy for Type that Sticks in Distributing                 76
  Care of Wood Type                                           38
  To Ascertain the Quantity of Plain Type Required for
    Newspapers                                                75
  Repairing Battered Wood Type                                82


PRINTERS' ROLLERS.

  Keeping Rollers when not in Use                             62
  Preservative of Rollers when not in Use                     62
  Rollers in Summer Time                                      63
  To Keep Green Mould from Rollers                            63
  Treatment of Old Rollers                                    64
  A Recipe for Printer's Rollers                              64
  When to Wash Rollers                                        66
  Oils for Lubricating Roller Moulds                          62


PRINTING METHODS.

  Gloss Printing                                              49
  Colors for Printing                                         51
  Off-Setting                                                 83
  Printing Envelopes                                          60
  On "Casting Up"                                             74
  To Prevent Set-off                                          61
  Temperature of the Pressroom                                65


LYE.

  A Strong Lye                                                79
  A Cheap Lye                                                 77




Paper and Printing Recipes.


HOW TO REMOVE COMMON WRITING INK FROM PAPER WITHOUT INJURY TO THE PRINT.

Common writing ink may be removed from paper without injury to the print
by oxalic acid and lime, carefully washing it in water before restoring it
to the volume.


TO RENDER PENCIL NOTES INDELIBLE.

Pencil notes found in a book, or placed there as annotations, may be
rendered indelible by washing them with a soft sponge dipped in warm
vellum size or milk.


TO REMOVE GREASE SPOTS FROM PAPER.

Grease may be removed from paper in the following manner: Warm gradually
the parts containing the grease, and extract as much as possible of it by
applying blotting-paper. Apply to the warm paper with a soft, clean brush,
some clear essential oil of turpentine that has been boiled, and then
complete the operation by rubbing over a little rectified spirits of
wine.


HOW TO DETECT ARSENIC IN PAPER.

A simple method for detecting arsenic in paper, cards, etc., is described
as follows:--Immerse the suspected paper in strong ammonia on a white
plate or saucer; if the ammonia becomes blue, the presence of salt of
copper is proved; then drop a crystal of nitrate of silver into the blue
liquid, and, if any arsenic be present, the crystal will become coated
with yellow arseniate of silver, which will disappear on stirring.


AN INK RESTORER.

The process consists in moistening the paper with water and then passing
over the lines in writing a brush which has been wet in a solution of
sulphide of ammonia. The writing will immediately appear quite dark in
color, and this color, in the case of parchment, it will preserve.


COLORS FOR HOLDING BRONZE.

Red and green inks are good colors for holding bronze, when you are not
working with size or varnish.


STENCIL INK.

A good and cheap stencil ink in cakes is said to be obtained by mixing
lampblack with fine clay, a little gum arabic or dextrine, and enough
water to bring the whole to a satisfactory consistence.


COPYING INK TO BE USED WITHOUT PRESS OR WATER.

Well mix three pints of jet-black writing ink and one pint of glycerine.
This, if used on glazed paper, will not dry for hours, and will yield one
or two fair, neat, dry copies, by simple pressure of the hand, in any good
letter copy-book. The writing should not be excessively fine, nor the
strokes uneven or heavy. To prevent "setting off," the leaves after
copying should be removed by blotting-paper. The copies and the originals
are neater than where water is used.


WHITE INK.

There is really no such article as "white ink." A true ink is a solution
of some substance or combination of substances in liquid. Colored liquids,
however, may be prepared with various substances not soluble in the
liquids available for writing fluids. A "white ink" may be made by rubbing
the finest zinc white, or white lead, with a dilute solution of gum
arabic. It must be stirred up whenever the pen or brush is dipped into it.


PURPLE HEKTOGRAPH INK.

To make the purple hektograph ink:--Dissolve 1 part of methyl-violet in 8
parts of water, and add 1 part of glycerine. Gently warm the whole for
about an hour, then allow to cool and add 1/4 part alcohol. It is said, on
good authority, that the alcohol may be advantageously omitted, and that
the following proportions will give even better results than the above,
viz: Methyl-violet, 1 part; water, 7 parts; glycerine, 2 parts. This
formula, it is said, produces an ink which is less liable to sink into the
paper.


A DARK RED INDELIBLE INK.

An indelible red ink for marking linen may be made from the following
formula:

Prepare three separate solutions:

  I. Sodium carbonate          3 drs.
     Acacia                    3  "
     Water                    12  "

With this moisten the spot to be marked, and dry and smooth with a hot
flat iron.

  II. Platinum bichloride       1 dr.
      Water                     2 oz.

Trace the letters with this fluid, permit to dry, and finally apply
solution.

  III. Stannous chloride         1 dr.
       Water, distilled          4  "


TO MAKE A CARMINE.

Take 9 ozs. carbonate of soda and dissolve in 27 quarts of rain-water, to
which add 8 ozs. of citric acid. When boiling, add 1-1/2 lbs. of best
cochineal, ground fine, and boil for one and a quarter hours. Filter and
set the liquor aside until cool. Then boil the clear liquor for ten
minutes with 9-1/2 ozs. of alum. Draw off, and allow the mixture to settle
for two or three days. Again draw off the liquor, and wash the sediment
with clear, cold, soft water, and then dry the sediment.


VIOLET INK.

To make violet ink:--Put 8 ozs. logwood into 3 pints of water, and boil
until half the water has gone off in steam. The rest will be good ink, if
strained, and supplemented by 1-1/2 ozs. gum, and 2-1/2 ozs. alum.
Chloride of tin may be used instead of alum. Another plan is to mix, in
hot water, 1 oz. cudbear (a dye obtained from lichen fermented in urine)
and 1-1/2 ozs. pearlash; let it stand 12 hours; strain; add 3 ozs. gum and
1 oz. spirit.


INDELIBLE INK.

A cheap indelible ink can be made by the following recipe:--Dissolve in
boiling water 20 parts of potassa, 10 parts of fine-cut leather chips, and
5 parts of flowers of sulphur are added, and the whole heated in an iron
kettle until it is evaporated to dryness. Then the heat is continued until
the mass becomes soft, care being taken that it does not ignite. The pot
is now removed from the fire, allowed to cool, water is added, the
solution strained and preserved in bottles. This ink will flow readily
from the pen.


HOW TO REMOVE INK-STAINS FROM THE HANDS.

Ripe tomatoes will remove ink or other stains from the hands.


TREATMENT OF INDIA INK DRAWINGS.

An easy method for rendering drawings in Indian ink insensible to water,
and thus preventing the ink from running when the drawing has to be
colored and the lines are very thick:--To the water in which the ink has
to be rubbed, is added a weak solution of bichromate of potash of about 2
per cent. The animal gum contained in the Indian ink combines with the
bichrome, and becomes insoluble under the influence of light.


BLACK INK.

To make a black ink for fountain pens, add 1 part of nigrosein to 50 parts
of hot water; agitate well at intervals; let it cool, and after twelve
hours filter through a fine linen cloth, and add a few drops of carbolic
acid to each pint. This may be diluted with three times its volume of
water, and still form a good ink for ordinary pens.


INK FOR RUBBER STAMPS.

Aniline (red violet), 16 parts; boiling distilled water, 80 parts;
glycerine, 7 parts; molasses, 3 parts.


CARDINAL INK.

Improved cardinal ink for draughtsmen is made as follows:--Triturate 1
gram of pure carmine with 15 grams of acetate ammonia solution and an
equal quantity of distilled water, in a porcelain mortar, and allow the
whole to stand for some time. In this way a portion of the alumina which
is combined with the carmine dye is taken up by the acetate acid of the
ammonia salt and separates as precipitate, while the pure pigment of the
cochineal remains dissolved in the half saturated ammonia. It is now
filtered and a few drops of pure white sugar syrup added to thicken it. In
this way an excellent red drawing ink is obtained, which holds its color a
long time. A solution of gum arabic cannot be employed to thicken this
ink, as it still contains some acetic acid, which would coagulate the
bassorine, one of the natural constituents of gum arabic.


AN ARTICLE FOR LABELING BOTTLES.

A very useful article for labeling bottles containing substances which
would destroy ordinary labels consists of a mixture of ammonium fluoride,
barium sulphate and sulphuric acid, the proportions for its manufacture
being: barium sulphate, 3 parts; ammonium fluoride, 1 part; and sulphuric
acid enough to decompose the fluoride and make a mixture of semi-fluid
consistency. This mixture, when brought in contact with a glass surface
with a common pen, at once etches a rough surface on the parts it comes in
contact with. The philosophy of the action is the decomposition of the
ammonium fluoride by the acid, which attacks the glass; the barium
sulphate is inert, and is simply used to prevent the spreading of the
markings. The mixture must be kept in bottles coated on the inside with
paraffine or wax.


HOW TO REMOVE ANILINE INK FROM THE HANDS.

Aniline inks are now in common use, especially in connection with the
various gelatine tablets for multiplying copies of written matter. Upon
the hands it makes annoying stains, difficult of removal by water or
acids. They may be easily washed out by using a mixture of alcohol 3
parts, and glycerine 1 part.


AN INK WHICH CANNOT BE ERASED.

An ink which cannot be erased from paper or parchment by any known
chemical solvent, and will retain its original color indefinitely, and
last as long as the material on which it is written, is made as
follows:--Make a solution of shellac in borax, to which add sufficient
lampblack to give the requisite depth of color.


TO MAKE BLACK INK.

Lactate of iron, 15 grains; powdered gum arabic, 75 grains; powdered
sugar, half a drachm; gallic acid, 9 grains; hot water, 3 ounces. (Lactate
of iron is a novelty in ink-making, and the above formula may possibly
suit those who have a taste for writing with mucilaginous matters instead
of limpid solutions.)


Black Ink for Stencils.

The following is commended for the preparation of a black ink or paste for
use with stencils:--Boneblack, 1 lb.; molasses, 8 ozs.; sulphuric acid, 4
ozs.; dextrine, 2 ozs.; water sufficient. Mix the acid with about two
ounces of water, and add it to the other ingredients, previously mixed
together. When the effervescence has subsided, enough water is to be added
to form a paste of convenient consistence.


MARKING INK.

Put two pennyworths' lunar caustic (nitrate of silver) into half a
tablespoonful of gin, and in a day or two the ink is fit for use. The
linen to be marked must first be wet with a strong solution of common
soda, and be thoroughly dried before the ink is used upon it. The color
will be faint at first, but by exposure to the sun or the fire it will
become quite black and very durable.


BLUE MARKING INK FOR WHITE GOODS.

  Crystallized nitrate of silver, dram    1
  Water of ammonia, drams                 3
  Crystallized carbonate of soda, dram    1
  Powdered gum arabic, drams              1-1/2
  Sulphate of copper, grains             30
  Distilled water, drams                  4

Dissolve the silver salt in the ammonia; dissolve the carbonate of soda,
gum arabic, and sulphate of copper in the distilled water, and mix the two
solutions together.


BLUE-BLACK WRITING PAPER.

Take of Aleppo galls, bruised, 9 ozs.; bruised cloves, 2 drachms; cold
water, 80 ozs.; sulphate of iron, 3 ozs.; sulphuric acid, 70 minims;
indigo-paste, 4 drachms. Place the galls and the cloves in a gallon
bottle, pour upon them the water, and let them macerate, with frequent
agitation, for a fortnight. Press, and filter through paper into another
gallon bottle. Next, put in the sulphate of iron, dissolve it, add the
acid, and shake the whole briskly. Lastly, add the indigo-paste, mix well,
and filter again through paper. Keep the ink in well-corked bottles.


COLORING METALS.

Metals may be rapidly colored by covering their surfaces with a thin layer
of sulphuric acid. According to the thickness of the layer and the
durability of its action, there may be obtained tints of gold, copper,
carmine, chestnut-brown, clear and aniline blue and reddish-white. These
tints are all brilliant, and if care be taken to scour the metallic
objects before treating them with the acid, the color will suffer nothing
from the polishing.


FOR CHEAPLY GILDING BRONZES, ETC.

A mixture for cheaply gilding bronzes, gas-fittings, etc.:--Two and
one-half pounds cyanide of potash, five ounces carbonate of potash and two
ounces cyanate of potass, the whole diluted in five pints of water,
containing in solution one-fourth ounce chloride of gold. The mixture must
be used at boiling heat, and, after it has been applied, the gilt surface
must be varnished over.


HOW TO CLEAN A CHAMOIS SKIN.

When a chamois skin gets into a dirty condition, rub plenty of soft soap
into it, and allow it to soak for a couple of hours in a weak solution of
soda and water. Then rub it until it appears quite clean. Now take a weak
solution of warm water, soda and yellow soap, and rinse the leather in
this liquor, afterward wringing it in a rough towel, and drying it as
quickly as possible. Do not use water alone, as that would harden the
leather and make it useless. When dry brush it well and pull it about; the
result will be that the leather will become almost as soft as fine silk,
and will be, to all intents and purposes, far superior to most new
leathers.


HINTS ON DRESSING THE STORE WINDOWS.

In dressing store windows avoid as far as possible placing cards or note
sheets flat; endeavor in some manner to have them erect, leaning against a
box or placed upon a small easel. Neither crowd your window nor place
things in exact rows. Give each article plenty of space in your window;
then you do not need so much to fill up, and on the following week put in
the pieces you might have displayed the previous week had you crowded your
window.


A VARNISH FOR PAPER.

A varnish for paper which produces no stains, may be prepared as
follows:--Clear damar resin is covered in a flask, with four and a half to
six times its weight of acetone, and allowed to stand for fourteen days at
a moderate temperature, after which the clear solution is poured off.
Three parts of this solution are mixed with four parts of thick collodian,
and the mixture allowed to become clear by standing. It is applied with a
soft hair brush in vertical strokes. At first the coating looks like a
thin, white film, but on complete drying it becomes transparent and
shining. It should be laid on two or three times. It retains its
elasticity under all circumstances, and remains glossy in every kind of
weather.


TO REMOVE GREASE SPOTS FROM PAPER.

The following is a recipe for removing grease spots from paper:--Scrape
finely some pipe clay on the sheet of paper which is to be cleaned. Let it
completely cover it, then lay a thin piece of paper over it, and pass a
heated iron on it for a few seconds. Then take a perfectly clean piece of
India rubber and rub off the pipe clay. In most cases one application will
be found sufficient, but if it is not, repeat it.


PAPER FOR TAKING OUT INK STAINS.

Thick blotting paper is soaked in a concentrated solution of oxalic acid
and dried. Laid immediately on a blot it takes it out without leaving a
trace behind.


QUALITIES OF GOOD PAPER.

A good paper ought to feel tight and healthy, not clammy and soft, as if a
little muscle were required. Paper-makers say that a good paper has
"plenty of guts" in it, a forcible if not extremely polite expression. In
buying a good paper always look out for the "guts." Clay gives paper a
soft feel. Perhaps the first qualification about a good writing paper is
its cleanliness and freedom from specks of all kinds. A dirty paper is
never salable except to dirty people and firms who don't mind using dirty
materials.


PASTE FOR LABELS.

For adhesive labels dissolve 1-1/2 ozs. common glue, which has laid a day
in cold water, with some candy sugar, and 3/4 oz. gum arabic, in 6 ounces
hot water, stirring constantly till the whole is homogeneous. If this
paste is applied to labels with a brush and allowed to dry, they will then
be ready for use by merely moistening with the tongue.


HOW TO PRODUCE ENGRAVINGS OR TYPES FOR PRINTING BY PHOTOGRAPHY

The process of producing engravings or types for printing by photography
consists first, in making a sharp negative of the picture to be engraved;
second, in the photographic printing of a sheet of sensitized gelatine by
means of the negative; third, the development of the printed lines upon
the surface of the gelatine by water; and fourth, the casting of a copy of
the developed gelatine sheet in metal, the metal so produced being used
for printing on the press in the ordinary manner. All this is very simple,
and in the hands of experienced and skilled persons very beautiful
examples of printing plates, having all the fineness and artistic effect
of superior hand engraved work, may be produced.


HOW TO SPLIT A SHEET OF PAPER.

Get a piece of plate glass and place on it a sheet of paper; then let the
paper be thoroughly soaked. With care and a little dexterity the sheet can
be split by the top surface being removed. But the best plan is to paste a
piece of cloth or strong paper on each side of the sheet to be split. When
dry, violently and without hesitation pull the two pieces asunder, when
part of the sheet will be found to have adhered to one and part to the
other. Soften the paste in water and the pieces can be easily removed
from the cloth. The process is generally demonstrated as a matter of
curiosity, yet it can be utilized in various ways. If we want to paste in
a scrap book a newspaper article printed on both sides of the paper, and
possess only one copy, it is very convenient to know how to detach the one
side from the other. The paper, when split, as may be imagined, is more
transparent than it was before being subjected to the operation, and the
printing ink is somewhat duller; otherwise the two pieces present the
appearance of the original if again brought together.


ANILINE INK PAPER.

To make aniline ink paper thick filtering paper is soaked in a very
concentrated solution of an aniline dye and allowed to dry; it may then be
soaked again to make it absorb more color. With a little attention it will
not be difficult to prepare the paper so as to have a known quantity of
coloring matter in a square of a given size. Paper prepared as above is
very convenient to have when traveling; when one wishes to write, it is
only necessary to tear off a small piece of the paper and let it soak in a
little water. Aniline blue paper may also be employed conveniently for
bluing in washing.


TO MAKE INCOMBUSTIBLE WRITING AND PRINTING PAPER.

To make incombustible writing and printing paper, asbestos of the best
quality is treated with potassium permanganate and then with sulphuric
acid. About ninety-five per cent of such asbestos is mixed with five per
cent of wood pulp in water containing borax and glue. A fire proof ink is
made of platinous chloride and oil of lavender, mixed for writing with
India ink and gum, and for printing with lampblack and varnish.


HOW TO TAKE PRINTERS' INK OUT OF SILK.

To take printer's ink out of silk without damaging the goods:--Put the
stained parts of the fabric into a quantity of benzine, then use a fine,
rather stiff brush, with fresh benzine. Dry and rub bright with warm water
and curd soap. The benzine will not injure the fabric or dye.


TO REMOVE RULING INK STAINS FROM FINGERS.

Wash in chloride of lime and then rinse hands in a spoonful of alcohol.
The operation should be done quickly, as the lime, of course, eats into
the flesh. The alcohol renders the hands smooth again, and takes away the
disagreeable odor.


TO PREVENT WINDOW STEAMING.

A remedy against window steaming is composed of methylated spirit at about
63 per cent over-proof, glycerine and any of the essential oils, and in
some cases amber dissolved in spirit, according to the state of the
atmosphere.

About eight ounces of glycerine to about one gallon of spirit, the
quantity of essential oil depending upon the nature of the same; but it
will be understood that these proportions may be varied. Instead of
methylated spirit, spirit of wine may be employed, but methylated spirit
is preferable as being the cheaper. In combining the above-named
ingredients, the essential is destroyed by being mixed with the methylated
spirit or with the spirit of wine, and the liquid is then incorporated
with the glycerine. The combination is affected at the ordinary
temperature, the employment of heat being unnecessary. This liquid
composition is applied to the internal surface of the pane of glass or the
lens, either by rubbing it on with felt or with cotton-waste, or by
spreading it thereon with a camel's hair brush, or with other suitable
appliances, and thus the dull and dimmed appearance of glass usually
produced by condensation--known as steaming or sweating--is avoided.


TO RENDER PAPER SOFT AND FLEXIBLE.

To render paper soft and flexible, heat it with a solution of acetate of
soda, or of potash dissolved in four to ten times its weight of water. For
permanent paper, to twenty parts of this solution one part of starch or
dextrine is added. If the paper has to be made transparent, a little of a
solution containing one part soluble glass in four to eight parts water is
added. To render the paper fit for copying without being made wet, to the
acetate solution chromic acid or ferro-cyanide of potassium is added.


TO REMOVE INK SPOTS.

First moisten the blots with a strong solution of oxalic acid, then with a
clear saturated aqueous solution of fresh chloride of lime--bleaching
powder. Absorb excess of the liquids from the paper as quickly as possible
with a clean piece of blotting paper. Repeat the treatment if necessary,
and dry thoroughly between blotting pads under pressure.


ELECTRO GILDING IN COLORS.

Electro-gilding in various colors may be readily effected by adding to the
gold bath small quantities of copper or silver solution until the desired
tint is obtained. A little silver solution added to the gilding bath
causes the deposit to assume a pale yellow tint. By increasing the dose of
silver solution a pale greenish tint is obtained. Copper solution added to
the gold bath yields a warm, red gold tint. It is best to use a current of
rather high tension, such as that of the Bunsen battery, for depositing
the alloy of gold and copper.


TO REMOVE OIL MARKS FROM PAPER.

Oil marks on wall paper, where careless persons have rested their heads,
may be removed by making a paste of cold water and pipe clay or fuller's
earth, and laying it on the stains without rubbing it in; leave it on all
night, and in the morning it can be brushed off, and the spot, unless it
be a very old one, will have disappeared. If old, renew the application.


TO REMOVE INK STAINS FROM MAHOGANY.

To remove ink stains from mahogany apply carefully with a feather a
mixture of a teaspoonful of water and a few drops of nitre, and rub
quickly with a damp cloth.


SOLID POCKET GLUE.

Is made from 600 grams of glue and 250 grams of sugar. The glue is at
first completely dissolved by boiling with water; the sugar is then
introduced into the hot solution, and the mixture evaporated until it
becomes solid on cooling. The hard mass dissolves very rapidly in lukewarm
water, and then gives a paste which is especially adapted for paper.


TO TEST GLUE.

An article of glue which will stand damp atmosphere is a desideratum among
mechanics. Few know how to judge of quality except by the price they pay
for it. But price is no criterion; neither is color, upon which so many
depend. Its adhesive and lasting properties depend more upon the material
from which it is made, and the method of securing purity in the raw
material, for if that is inferior and not well cleansed, the product will
have to be unduly charged with alum or some other antiseptic, to make it
keep during the drying process. Weathered glue is that which has
experienced unfavorable weather while drying, at which time it is rather a
delicate substance. To resist damp atmosphere well, it should contain as
little saline matter as possible. When buying the article, venture to
apply your tongue to it, and if it tastes salt or acid, reject it for
anything but the commonest purpose. The same operation will also bring out
any bad smell the glue may have. These are simple and ready tests and are
the ones usually adopted by dealers and large consumers. Another good
test is to soak a weighed portion of dry glue in cold water for
twenty-four hours, then dry again and weigh. The nearer it approaches to
its original weight the better glue it is, thereby showing its degree of
insolubility.


BOOK-BINDERS' GLUE.

To prevent book-binders glue from turning sour, add enough of the raw
salicylic acid in boiling water to keep it soluble. It is also commended
never to keep glue in open pots, but in cylindrical shaped vessels that
admit of tight corking.


HOW TO MAKE A CEMENT FOR GLASS THAT WILL RESIST ACIDS.

To make a cement for glass that will resist acids, the following has been
recommended:--Take 10-1/2 pounds of pulverized stone and glass, and mix
with it 4-3/4 pounds of sulphur. Subject the mixture to such a moderate
degree of heat that the sulphur melts. Stir until the whole becomes
homogeneous, and then run it into molds. When required for use it is to be
heated to 248°, degrees, at which temperature it melts, and may be
employed in the usual manner. This, it is said, resists the action of
acids, never changes in the air, and is not affected in boiling water. At
230° it is said to be as hard as stone.


CEMENT FOR LABELS.

1. Macerate 5 parts of glue in 18 parts of water. Boil and add 9 parts
rock candy and 5 parts gum arabic. 2. Mix dextrine with water and add a
drop or two of glycerine. 3. A mixture of one part of dry chloride of
calcium, or 2 parts of the same salt in the crystallized form, and 36
parts of gum arabic, dissolved in water to a proper consistency, forms a
mucilage which holds well, does not crack by drying, and yet does not
attract sufficient moisture from the air to become wet in damp weather. 4.
For attaching labels to tin and other bright metallic surfaces, first rub
the surface with a mixture of muriatic acid and alcohol, then apply the
label with a very thin coating of the paste, and it will adhere almost as
well as on glass. 5. To make cement for attaching labels to metals, take
10 parts tragacanth mucilage, 10 parts of honey, and 1 part flour. The
flour appears to hasten the drying, and renders it less susceptible to
damp.


A COLORLESS CEMENT FOR JOINING SHEETS OF MICA.

A colorless cement for joining sheets of mica is prepared as
follows:--Clear gelatine softened by soaking it in a little cold water,
and the excess of water pressed out by gently squeezing it in a cloth. It
is then heated over a water bath until it begins to melt, and just enough
hot proof spirit (not in excess) stirred in to make it fluid. To each pint
of this solution is gradually added, while stirring, one-fourth ounce of
sal-ammoniac and one and one-third ounces of gum mastic, previously
dissolved in four ounces of rectified spirits. It must be warmed to
liquefy it for use, and kept in stoppered bottles when not required. This
cement, when properly prepared, resists cold water.


A CEMENT THAT WILL RESIST THE DAMP.

A cement that will resist the damp, but will not adhere if the surface is
greasy, is made by boiling together 2 parts shellac, 1 part borax, and 16
parts water.


TO MAKE GLUE WATERPROOF.

The best substance is bichromate of potash. Add about one part of it,
first dissolved in water, to every thirty or forty parts of glue; but you
must keep the mixture in the dark, as light makes it insoluble. When you
have glued your substances together, expose the joint to the light, and
every part of the glue thus exposed will become insoluble, and therefore
waterproof. If the substances glued together are translucent like paper,
all will become waterproof; if opaque like wood, only the exposed edges
will become so, but they also protect the interior--not exposed
parts--against the penetration of moisture.


TWO GLUE RECIPES.

A glue ready for use is made by adding to any quantity of glue, common
whisky, instead of water. Put both together in a bottle, cork it tight and
set it for three or four days, when it will be fit for use without the
application of heat. Glue thus prepared will keep for years, and is at all
times fit for use, except in very cold weather, when it should be set in
warm water before using. To obviate the difficulty of the stopper getting
tight by the glue drying in the mouth of the vessel, use a tin vessel with
the cover fitting tight on the outside to prevent the escape of the spirit
by evaporization. A strong solution of isinglass made in the same manner
is an excellent cement for leather.

A valuable glue is made by an admixture with common glue of one part of
acid chromate of lime in solution to five parts of gelatine. The glue made
in this manner, after exposure, is insoluble in water, and can be used for
mending glass objects likely to be exposed to hot water. It can also be
made available for waterproofing articles such as sails or awnings, but
for flexible fabrics it is not suitable. A few immersions will be found
sufficient to render the article impervious to wet. It is necessary that
fractured articles should be exposed to the light after being mended, and
then warm water will have no effect on them, the chromate of lime being
better than the more generally used bichromate of potash.


POSTAGE STAMP MUCILAGE.

Postage stamp mucilage can be made by dissolving an ounce of dextrine in
five ounces of hot water, and adding one ounce of acetic acid and one
ounce of alcohol. The dextrine should be dissolved in water in a glue pot,
or some similar vessel, which will prevent burning. The quantities in this
recipe may be varied by taking any required weights in the proportions
mentioned. Dr. Phin says that dextrine mixed with water makes a good label
mucilage if a drop or two of glycerine be added to it. Too much glycerine
will prevent the mucilage drying; with too little it will be likely to
crack.


HOW TO KEEP MUCILAGE FRESH.

To keep mucilage fresh, and prevent the formation of mould, drop into the
bottle a few crystals of thymol, which is a strong and harmless
antiseptic.


MUCILAGE IN A SOLID FORM WHICH WILL DISSOLVE IN WATER.

Mucilage in a convenient solid form, and which will readily dissolve in
water, for fastening paper, prints, etc., may be made as follows:--Boil
one pound of the best white glue, and strain very clear; boil also four
ounces of isinglass, and mix the two together; place them in a water
bath--a glue pot will do--with one-half pound of white sugar, and
evaporate till the liquid is quite thick, when it is to be poured into
molds, dried, and cut into pieces of convenient size.


MUCILAGE FOR PASTEBOARD.

Persons are often at a loss for a very strong mucilage having sufficient
power of tenacity to fasten sheets of pasteboard together. The following
cement is recommended by a scientific authority. It has the additional
advantage of being waterproof. Melt together equal parts of pitch and
gutta-percha. To nine parts of this add three parts of boiled oil, and
one-fifth part of litharge. Continue the heat with stirring until a
thorough union of the ingredients is effected. Apply the mixture hot or
somewhat cooled, and thinned with a small quantity of benzole or
turpentine oil.


A PORTABLE INK.

The aniline colors, which possess great tinctorial powers, can be
conveniently used in the preparation of a portable ink. Saturate white
tissue paper with an aniline violet, or with aniline black, by dipping the
sheets into a saturated alcoholic solution of these colors; then dry and
pack them in suitable parcels, and you will have a portable ink, either
violet or black.


INDELIBLE INDIA INK.

Draughtsmen are aware that lines drawn on paper with good India ink well
prepared cannot be washed out by mere sponging or washing. Now, however,
it is proposed to take advantage of the fact that glue or gelatine, when
mixed with bichromate of potassa, and exposed to the light, becomes
insoluble, and thus renders India ink, which always contains a little
gelatine, indelible. Reisenbichler, the discoverer, calls this kind of ink
"Harttusche," or "hard India ink." It is made by adding to the common
India ink of commerce about one per cent, in a very fine powder, of
bichromate of potash. This must be mixed with the ink in a dry state;
otherwise, it is said, the ink could not be easily ground in water. Those
who cannot provide themselves with ink prepared as above in a cake, can
use a dilute solution of bichromate of potash in rubbing up the ink. It
answers the same purpose, though the ink should be used thick, so that the
yellow salt will not spread.


TO MAKE COPYING INKS.

Dissolve in a pint and a half of writing ink (violet or any other color)
an ounce of lump sugar or sugar candy. A copying ink, so slow drying that
writing in it can be copied by the use of no greater pressure than the
hand can produce when passed over a sheet of paper, may be made by boiling
away nearly half of some ordinary writing fluid and then adding as much
glycerine.


A GOOD PASTER.

Let a little starch lie in vinegar over night. Pour in boiling water,
stirring briskly till it thickens. It will keep better if a few drops of
carbolic acid are added. A very little corrosive sublimate will keep out
insects. A little glue dissolved in the vinegar will make it stronger. It
leaves the pasted scrap-page flexible, adheres firmly, dries quickly, and
does not give a varnishy look to even the thinnest print paper.


A PASTE WHICH WILL NOT SPOIL.

A paste that will not spoil is made by dissolving a piece of alum the size
of a walnut in one pint of water. Add to this two tablespoonfuls flour
made smooth with a little cold water, and a few drops of oil of cloves,
putting the whole to a boil. Put up in a glass canning-jar.


ELECTRIC PAPER.

Electric paper may be made thus:--Tissue paper or filtering paper is
soaked in a mixture consisting of equal quantities of saltpetre and
sulphuric acid. It is afterwards exposed to dry, when a pyroxyline (a
substance resembling gun-cotton) forms. This is in the highest degree
electrical.


A SILVER SOLDER.

To make silver solder melt together 34 parts, by weight, silver coin, and
five parts copper; after cooling a little, drop into the mixture 4 parts
zinc, then heat again.


AN ALLOY FOR GLASS OR METAL.

The following alloy, it is said, will attach itself firmly to glass,
porcelain or metal.--Twenty to thirty parts of finely pulverulent copper,
prepared by precipitation or reduction with the battery, are made into a
paste with oil of vitriol. To this seventy parts of mercury are added, and
well triturated. The acid is then washed out with boiling water and the
compound allowed to cool. In ten or twelve hours it becomes sufficiently
hard to receive a brilliant polish, and to scratch the surface of tin or
gold. When heated it is plastic, but does not contract on cooling.


AN IMPROVED PROCESS OF PHOTO-ENGRAVING.

The metal plate, of copper or zinc, is coated with a very thin layer of
bitumen of Judæa, and when this coat has become perfectly dry, a film of
bichromatized albumen is flowed over the plate. It is next exposed in the
camera, and afterwards washed with water, in order to dissolve all the
albumen which has not been rendered insoluble by the luminous action; it
is then treated with spirit of turpentine, which dissolves all those parts
of the layer of bitumen that have become exposed. The plate can now be
attacked directly by water acidulated with from four to six per cent of
nitric acid. The great advantage of this method consists in the high
sensitiveness of the bichromatized albumen, at the same time preserving
the solid reserve produced by the bitumen of Judæa on a metallic surface.


TO MAKE NEW A CORRODED PEN.

When a pen has become so corroded as to be useless, it can be made good as
new by holding it in the flame of a gas jet for half a minute; then drop
in cold water, take out, wipe clean, and it will be ready for use again.


ENAMEL FOR FINE CARDS.

For the brilliant enamel now often generally applied to fine cards and
other purposes, the following formula is given:--For white and for all
pale and delicate shades, take twenty-four parts, by weight, of paraffine;
add thereto 100 parts of pure kaolin (China clay), very dry and reduced to
a fine powder. Before mixing with the kaolin, the paraffine must be heated
to fusing point. Let the mixture cool, and it will form a homogeneous
mass, which is to be reduced to powder, and worked into paste in a
paint-mill, with warm water. This is the enamel ready for application. It
can be tinted according to fancy.


ELECTROTYPING HANDWRITING.

To produce electrotypes or stereotypes of letters, signatures, ordinary
written matter, drawings or sketches, coat a smooth surface of glass or
metal with a smooth, thin layer of gelatine, and let it dry. Then write or
draw upon it with an ink containing chrome alum, allow it to dry exposed
to light, and immerse the plate in water. Those parts of the surface which
have not been written upon will swell up and form a relief plate, while
those parts which have been written upon with the chrome ink have become
insoluble in water, after exposure to light. The relief may be transferred
to plaster of Paris, and from this may be made a plate in type metal.


BLACK PAINT FOR BLACKBOARDS.

Take shellac varnish, one-half gallon; lampblack, five ounces; powdered
iron ore or emery in fine powder, three ounces. If too thick, thin down
with alcohol. Give the wood three coats of the composition, allowing each
to dry before putting on the next. The first coat may be of shellac and
lampblack alone.


TO CLEAN STEEL PENS.

Potato is used to clean steel pens, and generally act as a pen-wiper. It
removes all ink crust, and gives a peculiarly smooth flow to the ink. Pass
new pens two or three times through a gas flame, and then the ink will
flow freely.


STATIONERS' WINDOWS.

It is important that strangers should get a good impression with a tasty
window, or a polite reception when entering the store. Remember that first
impressions go a great way, and when once formed, good or bad, are very
hard to get rid of. Make it a special point to clean the window once a
week, put in different stock every time, and do not be afraid to display
goods because the dust will spoil them. If the article in question is
delicate and easily ruined, leave it in the window only a few days;
display samples of the latest goods, and, if necessary, buy some article
that is showy, and which you think will attract people, especially for the
window, even though the amount expended is "sunk." It will certainly pay
in the end. If your stock of a certain article or class of goods is large,
devote the whole window to it for a week.

It is impossible to give rules for the arrangement, which, of course,
depends on the goods to be shown and the taste of the person dressing the
window. Stamped papers and visiting cards can be shown effectively in the
following manner:--Have a number of wooden blocks made the size of a
quarter of a ream of paper and a package of visiting cards; wrap these
neatly with a sample sheet of paper or cards on the outside, tied with
ribbon. Another way to show printed visiting cards is to make a small
pyramid of them by taking three small square boxes of different sizes,
which, when placed one on top of the other, will form a small pyramid.
Cover these entirely with samples of visiting cards, and place in the
center of the window.


PHOTO-LITHOGRAPHIC TRANSFER PAPER.

Photo-lithographic transfer paper and ink are prepared in the following
manner:--The paper is treated with a solution of a hundred parts of
gelatine and one part of chrome alum in 2,400 parts of water. After
drying, it is treated with the white of egg. It is made sensitive with a
bath consisting of one part of chrome alum, 14 parts of water and 4 parts
of alcohol. The latter ingredient prevents the white of egg from
dissolving. On the dark places the white of egg, together with the ink
with which the exposed paper has been coated, separates in water. The
transfer ink consists of 20 parts of printing ink, 50 parts of wax, 40
parts of tallow, 35 parts of colophony, 210 parts of oil of turpentine, 30
parts of Berlin blue. It is found that a varnish formed of Canadian
balsam, dissolved in turpentine, supplies a most valuable means of making
paper transparent. The mode by which this is most satisfactorily
accomplished is by applying a thin coating of this varnish to the paper,
so as to permeate it thoroughly, after which it is to be coated on both
sides with a much thicker mixture. The paper is kept warm by performing
the operation before a hot fire, and a third and even a fourth coating may
be applied until the texture of the paper is seen to merge into
homogeneous translucency. Paper prepared according to this process is
said to come nearer than any other to the highest standard of perfection
in transparent paper. Care must be used in making, as the materials are
highly inflammable.


DIFFERENT KINDS OF ENGRAVING.

"Line" engraving is of the highest order. All engravings are done in
"line"--simply straight lines. Next comes "line" and "stiple." "Stiple"
means dots--small dots like this:--....--.... These small dots are used to
lighten up the high parts of the face or drapery. It is very hard to
engrave a face in lines, simply, and only master engravers have ever
undertaken it. The masters understand and practice both in "line" and
"stiple." Claude Mellan engraved, in 1700, a full head of Christ, with one
unbroken line. This line commenced at the apex of the nose, and wound out
and out like a watch spring. Mezzotint engravings are produced thus:--The
steel or copper is made rough like fine sand paper. To produce soft
effects, this rough surface is scraped off. If you want a high place or
"high light" in your engraving, scrape the surface smooth, then the ink
will not touch it. If you want faint color, scrape off a little. Such
engravings look like lithographs. Etching is adapted to homely and
familiar-sketches. Etching is done thus:--The copper or steel plate is
heated and covered with black varnish. The engraver scratches off this
varnish with sharp needles, working on the surface as he would on paper
with a pencil. Nitric acid is then passed over the plate, and it eats away
at the steel and copper wherever the needle has scraped off the varnish.
When the varnish is removed with spirits of turpentine, the engraving is
seen in sunken lines on the plate.


HOW TO PRESERVE PENCIL SKETCHES.

The pencil drawings of mechanical draughtsmen and engineers may be
rendered ineffaceable by the following process:--Slightly warm a sheet of
ordinary drawing paper, then place it carefully on the surface of a
solution of white resin in alcohol, leaving it there long enough to become
thoroughly moistened. Afterward dry it in a current of warm air. Paper
prepared in this way has a very smooth surface. In order to fix the
drawing, the paper is to be warmed for a few moments. This process may
prove useful for the preservation of plans or designs when the want of
time or any other cause will not allow the draughtsman reproducing them in
ink. A simpler method than the above, however, is to brush over the back
of the paper containing the charcoal or pencil sketch with a weak solution
of white shellac in alcohol.


CARE OF WOOD TYPE.

Wood type should always be kept in a cool and dry place--not, as is often
the case, a few feet from a large stove, or directly over the lye and wash
tub. The drawer or shelves--drawers or cases are preferable to
shelves--where they are kept, should not, as very often happens, be made
of unseasoned wood, for this reason: type wood is usually perfectly
seasoned, and when allowed to remain for any length of time on a damp
surface, the moisture is absorbed, the bottom expands, and a warped type,
ready to be broken at the first impression, is the result.

Wood type should only be washed with oil. A moistened cloth is sufficient,
is more economical, and is certainly much cleaner than using their weight
in oil. All wood type have a smooth and polished face, and if properly
cleaned when put away will last for years. In fact, proper use only
improves the working qualities. Wood type forms should not be left
standing near hot stoves, or left locked up over night on a damp press or
stone to warp, swell, and perhaps ruin a costly chase.


COPPER-PLATING ON ZINC.

Take an organic salt of copper--for instance, a tartrate. Dissolve 126
grammes sulphate of copper (blue vitriol) in two litres of water; also
227 grammes tartrate of potash and 286 grammes crystallized carbonate of
soda in 2 litres of water. On mixing the two solutions, a light
bluish-green precipitate of tartrate of copper is formed. It is thrown on
a linen filter and afterwards dissolved in half a litre of caustic soda
solution of 16° B. when it is ready for use.

The coating obtained from this solution is very pliable, smooth and
coherent, with a fine surface; acquires any desired thickness if left long
enough in the bath.

Other metals can also be employed for plating, in the form of tartrates.
Instead of tartrates, phosphates, oxalates, citrates, acetates and borates
of metals can be used; so that it seems possible to entirely dispense with
the use of cyanide baths.


TO TRANSFER ENGRAVINGS TO MOTHER-OF-PEARL.

To transfer engravings to mother-of-pearl, coat the shell with thin white
copal varnish. As soon as the varnish becomes sticky, place the engraving
face down on it, and press it well into the varnish. After the varnish
becomes thoroughly dry, moisten the back of the engraving and remove the
paper very carefully by rubbing. When the paper is all removed and the
surface becomes dry, varnish lightly with copal.


METAL FOR STEREOTYPING.

For every six pounds of lead add one pound of antimony. The antimony
should be broken into very small pieces, and thrown on the top of the lead
when it is at red heat. It is a white metal, and so brittle that it may be
reduced to powder; it melts when heated to redness; at a higher heat it
evaporates.

The cheapest and most simple mode of making a stereotype metal is to melt
old type, and to every fourteen pounds add about six pounds of grocer's
tea-chest lead. To prevent any smoke arising from the melting of tea-chest
lead it is necessary to melt it over an ordinary fire-place, for the
purpose of cleansing it, which can be done by throwing in a small piece of
tallow about the size of a nut, and stir it briskly with the ladle, when
the impurities will rise to the surface, and can be skimmed off.

In the mixing of lead and type-metal see that there are no pieces of zinc
among it, the least portion of which will spoil the whole of the other
metal that is mixed with it. Zinc is of a bluish white color; its hue is
intermediate between that of lead and tin. It takes about eighty degrees
more heat than lead to bring it into fusion; therefore, should any metal
float on the top of the lead, do not try to mix it, but immediately take
it off with the ladle.


HOW TO FIX PENCIL MARKS SO THEY WILL NOT RUB.

To fix pencil marks so they will not rub, take well skimmed milk and
dilute with an equal bulk of water. Wash the pencil marks (whether writing
or drawing) with this liquid, using a soft camel-hair brush, and avoid all
rubbing. Place upon a flat board to dry.


HOW TO OBTAIN A BRIGHT AND LASTING RED EDGE.

A bright and lasting red edge may be obtained by the following
process:--Take the best vermillion and add a pinch of carmine; mix this
with glaire, slightly diluted. Take the book and bend over the edge so as
to allow the color to slightly permeate it; then apply the color with a
bit of fine Turkey sponge, bend over the edge in the opposite direction,
and color again. When the three edges have been done in this manner, allow
them to dry. Next screw the book tightly up in the cutting press, and
after wiping the edge with a waxed rag, burnish well with a flat agate
burnisher.


TO RESTORE THE LUSTRE OF MOROCCO LEATHER.

The lustre of morocco leather is restored by varnishing with white of
egg.


TO RESTORE THE ORIGINAL WHITENESS OF COPPER-PLATE, WOOD ENGRAVING, ETC.

The following process will restore the original whiteness of copper-plate,
wood-engraving or printed matter:--Place a piece of phosphorus in a large
glass vessel; pour in water of 30° centigrade (that is 86° Fahrenheit)
temperature until the phosphorus is half covered. Cork up, but not
tightly, the glass vessel, and lay it in a moderately warm place for
fourteen hours. Damp the paper that is to be bleached, with distilled
water; fasten it to a piece of platinum wire and hang it up inside the
glass vessel. The faded paper after a short time will regain its original
white color. It should then be taken out and washed in water; next drawn
through a weak solution of soda, and finally dipped in pure water and laid
on a glass table, and thus made dry and smooth.


FOR ELECTROTYPING ON CHINA.

For electrotyping on China and similar non-conducting materials:--Sulphur
is dissolved in oil of spike lavender to a syrupy consistence; then
chloride of gold or chloride of platinum is dissolved in ether, and the
two solutions mixed under a gentle heat. The compound is next evaporated
until the thickness of ordinary paint, in which condition it is applied
with a brush to such portions of the china, glass or other fabric as it
is desired to cover, according to the design or pattern, with the
electrometallic deposit. The objects are baked in the usual way before
they are immersed in the bath.


PAINTING ON EBONIZED WOOD.

The great difficulty to be overcome in painting on ebonized wood, is the
non-absorbent character of the surface, which will not allow the paint to
sink in. Washing the panel over with onion juice enables the paint to
adhere more easily. The paint, whether oil or water color, must be laid on
thickly. In order that the painting, whether of flowers or figures, shall
prove a decoration, the black space between the painted figures must be
graceful in shape. Water color paintings on such panels require to be
varnished. Oil color does not need the varnish.


HOW GILDING IS DONE.

Letters written on vellum or paper are gilded in three ways. In the first
a little size is mixed with the ink, and the letters are written as usual;
when they are dry a slight degree of stickiness is produced by breathing
on them, upon which the gold leaf is immediately applied, and by a little
pressure may be made to adhere with sufficient firmness. In the second
method some white lead or chalk is ground up with strong size, and the
letters are made with this by means of a brush; when the mixture is almost
dry, the gold leaf may be laid on and afterward burnished. The best method
is to mix up some gold powder with size, and make the letters of this by
means of a brush.

The edges of the leaves of books are gilded while in the binders' press,
by first applying a composition formed of four parts of Armenian bole and
one of sugar candy, ground together to a proper consistence; it is laid on
by a brush with white of egg; this coating, when nearly dry, is smoothed
by the burnisher; it is then slightly moistened with clear water, the gold
leaf applied, and afterwards burnished.

In order to impress the gilt figures on the leather covers of books, the
leather is first dusted over with very fine powdered resin or mastic; then
the iron tool by which the figure is made is moderately heated and pressed
down upon a piece of leaf gold which slightly adheres to it, being then
immediately applied to the surface of the leather with a certain force;
the tool at the same time makes an impression, and melts the mastic which
lies between the heated iron and the leather; in consequence of this, the
gold with which the face of the tool is covered is made to adhere to the
leather, so that on removing the tool a gilded impression of it remains
behind.


PRINCIPAL COLORS OF GOLD FOR GRINDING.

The principal colors of gold for grinding are red, green, yellow. These
should be kept in different amalgams. The part which is to remain of the
first color is to be stopped off with a composition of chalk and glue; the
variety required is produced by gilding the unstopped parts with the
proper amalgam, according to the usual mode of gilding. Sometimes the
amalgam is applied to the surface to be gilt, without any quicking, by
spreading it with aquafortis; but this depends on the same principle as a
previous quicking.


WRITING ON METALS.

To write on metals, take half a pound of nitric acid and one ounce
muriatic acid. Mix and shake well together, and then it is ready for use.
Cover the plate you wish to mark with melted beeswax; when cold, write
your inscription plainly in the wax clear to the metal with a sharp
instrument. Then apply the mixed acids with a feather, carefully filling
each letter. Let it remain from one to ten hours, according to the
appearance desired, throw on water, which stops the process, and remove
the wax.


HOW TO TRANSFER A PHOTOGRAPHIC PRINT TO GLASS.

To transfer a photographic print to glass for painting or for other
purposes, separate the paper print from the background by steaming it; dry
thoroughly, and having given the warmed glass an even coating of clean
balsam or negative varnish, place the face of the print on the surface
thus prepared, smooth it out and let it stand in a cool place until the
varnish has hardened. Then apply water, and with a soft piece of
gum-rubber rub off the paper so as to leave the photographic image on the
varnished glass.


STEREOTYPING WOODCUTS.

In stereotyping woodcuts, care should be taken that they are thoroughly
dry before being sent to the foundry, as the intense heat to which they
are subjected frequently causes them to warp and split, especially if
pierced.


TO GILD WITH GOLD LEAF.

Bookbinders use gold leaf in two ways--to gild on the edge, and to place
gold letters on the binding. To gild on the edge, the edge is smoothly
cut, put in a strong press, scraped so as to make it solid, and the
well-beaten white of an egg, or albumen, put on thinly; the gold leaf is
then put on before the albumen is dry; it is pressed down with cotton,
and when dry polished with an agate polisher. To put on the lettering, the
place where the letters are to appear is coated with albumen, and after it
is dry, the type to be used is heated to about the boiling point of water,
the gold leaf is put on, either on the book or on the type, and then
placed on the spot where the lettering is desired, when the gold leaf will
adhere by the heat of the type, while the excess of gold leaf loosely
around is rubbed off with a tuft of cotton.


GILDING ON WOOD.

To gild in oil, the wood, after being properly smoothed, is covered with a
coat of gold size, made of drying linseed oil mixed with yellow ochre.
When this has become so dry as to adhere to the fingers without soiling
them, the gold leaf is laid on with great care and dexterity, and pressed
down with cotton wool. Places that have been missed are covered with small
pieces of gold leaf, and when the whole is dry the ragged bits are rubbed
off with cotton. This is by far the easiest mode of gilding. Any other
metallic leaves may be applied in a similar manner. Pale leaf gold has a
greenish-yellow color, and is an alloy of gold with silver. Dutch gold
leaf is only copper colored with the fumes of zinc. Being much cheaper
than gold leaf, it is very useful when large quantities of gilding are
required in places where it can be defended from the weather, as it
changes color if exposed to moisture; and it should be covered with
varnish. Silver leaf is prepared like gold leaf, but when applied should
be kept well covered with varnish, as otherwise it will tarnish. A
transparent yellow varnish will give it the appearance of gold.


GILDING IN OIL.

In order to make good work in oil gilding there are several indispensable
conditions which must be observed. First, a smooth ground. Second, gold
size free from grit or skins. Third, in putting oil gold size on the work
it must be dross black, ground in turpentine, and mixed with boiled
linseed oil and a small piece of dryers; well sand-paper again, when this
coat is dry. And now for the finishing coat of color, which should be
flat, _i. e._, mixed with turpentine and a few drops of japanner's
gold-size, but no oil. The dross black should be first ground in
turpentine and the gold-size added after. When this has dried, varnish
with hard drying oak varnish, leave for a day or two, and then rub down
with pumice-stone powder, sifted through muslin; use a piece of cloth or
felt wrapped on a small block of wood, and first wet the surface to be
rubbed with water; dry with a wash-leather, and re-varnish. The ornaments
are usually done with stencil patterns, and the lines are done with
straight edges and lining fitches. Stencil patterns can be cut out of card
paper. Before using, give a coat or two of patent knotting. For gilding
panels, give a coat of buff first, then a coat of gold-size, in oil. When
this has dried just sticky, press the gold leaf upon it with a ball of
wadding, and leave for five or six hours, then rub over with a piece of
soft wadding, and wash well with a sponge and cold water. The gold will
not need any preparation before painting on, but if varnished afterward
use pale varnish. Screens should be painted in colors to match the rooms
they are intended to be used in. Birds, flowers and animals are the
subjects generally introduced for this purpose. Birds should be painted
toward the top of the screen, animals, flowers, etc., in the centre or at
the bottom.


GLOSS PRINTING.

Gloss printing is done in two ways; one by using the gloss inks specially
prepared for the purpose, the other by printing the gloss preparation on
over the finished job, or over that portion of it required to be glossed.
To the inexperienced this is a difficult operation, attended by many
failures. It is accomplished as follows:--Prepare a tint block the exact
size and shape to cover the printing to be glossed. The block should be of
boxwood or hard metal--soft metal will not do. Fix it on the press and
make it ready as for ordinary work, with a good, even impression. Wash up
the ink table, the rollers and the block itself thoroughly, removing the
least trace of ink. Replace the rollers and distributors. Now, with a
clean palette knife put a little of the gloss preparation on the ink
cylinder or table, let it distribute for about a minute, and then pull an
impression; if it comes up perfectly clean, the work may proceed, but if
there are any signs of dirt, it is best to wash up again at once. While
working the gloss, keep the machine in motion, and should the gloss become
too sticky (which it is apt to do) sprinkle a very little turpentine on
the rollers. It is best to have a separate hand to put on the gloss, so as
not to delay the feeder, and the sheets should be taken away at once and
laid out singly to dry. The two most important points are to have the
machine clean and keep it in motion. After printing, wash up the gloss
quickly with benzine.


TO BLEACH SHEEPSKIN PARCHMENT WHITE.

To bleach sheepskin parchment white, expose the pieces to strong sunlight
under glass, in a moist atmosphere.


COLORS FOR PRINTING.

For a black color for printing, 25 parts paraffine oil and 45 parts resin
are mixed, either by melting at 80°C., or by mechanical means at the
ordinary temperature. To this mass 15 parts of black are added. For
printing machines, the mixture is composed of 40 parts of resin only,
instead of 45. Resin can, in some cases, be replaced by dammar. Other
colors are mixed by substituting the equivalent of the color to the black.
When cheapness has to be considered, paraffine oil can be substituted by
resinous oil, and resin by Burgundy resin, etc.


HOW TO DYE PARCHMENT BLUE OR RED.

Parchment can be dyed green, blue or red. To dye it blue, use the
following process:--Dissolve verdigris in vinegar; heat the solution, and
apply it by means of a brush on the parchment, till it takes a nice green
color. The blue color is then obtained by applying on the parchment thus
prepared a solution of carbonate of potash. Use two ounces for one gallon
of water. Another method is to cover it by means of a brush with
aquafortis, in which copper dust has been dissolved. The potash solution
is then applied as before, till the required shade is obtained. Another
method is by using the following solution:--Indigo, 5 ozs.; white wood,
10 ozs.; alum, 1 oz.; water, 50 ozs. Red:--The parchment is dyed red by
applying with a brush a cold logwood solution, and then using a 3 per cent
potash solution.


TO MAKE PAPER FIRE AND WATER-PROOF.

To make paper fire and water-proof, mix two-thirds ordinary paper-pulp
with one-third asbestos. Steep in a solution of common salt and alum, and
after being made into paper coat with an alcoholic solution of shellac. By
plunging a sheet of paper into an ammoniacal solution of copper for an
instant, then passing it between the cylinders and drying it, it is
rendered entirely impermeable to water, and may even be boiled without
disintegrating. Two, three, or any number of sheets rolled together become
permanently adherent, and form a material having the strength of wood. By
the interposition of cloth or any kind of fiber between the layers, the
strength is greatly increased.


A NEW BLOTTING PAPER.

A blotting paper that will not only dry the blot, but bleach the remainder
of it can be made by passing ordinary blotting paper or card through a
concentrated solution of oxalic acid. Care must be taken that no crystals
appear, which would injure the porosity of the paper.


IMPERMEABLE PAPER.

To make impermeable paper, prepare the two following baths: (1) alum, 25
ozs.; white soap, 12-1/2 ozs.; water, 100 ozs. (2) gum arabic, 6 ozs.;
Colle de Flandre, 18 ozs.; water, 100 ozs. Place the sheet of paper in the
first bath to be well impregnated. In this bath the paper is left only for
a short time. It is then dried and dipped in the second bath, the same
precautions being used as for the first bath. When dry, the paper is
hot-pressed in order to render it uniform.


TO MOUNT CHROMOS FOR FRAMING.

To mount chromos for framing, first soak for fifteen minutes in a shallow
dish, or lay between two newspapers that have been thoroughly saturated
with water; then paste to the panel of the wood or canvas which has been
prepared to receive them. Care must be taken that there are no lumps in
the paste.


A VARNISH FOR MAKING PAPER TRANSPARENT.

A varnish formed of Canada balsam, dissolved in turpentine, supplies a
most valuable means of making paper transparent. The mode by which this is
most satisfactorily accomplished is by applying a pretty thin coating of
this varnish to the paper, so as to permeate it thoroughly, after which it
is to be coated on both sides with a much thicker sample. The paper is
kept warm by performing the operation before a hot fire, and a third, or
even a fourth, coating may be applied, until the texture of the paper is
seen to merge into a homogeneous translucency. Paper prepared according to
this process is said to come nearer than any other to the highest standard
of perfection in transparent paper. Care must be used in making, as the
materials are highly inflammable.


CARBON PAPER.

To make carbon paper:--Take of clear lard, five oz.; beeswax, one oz.;
Canada balsam, one-tenth oz.; lampblack, q. s. Melt by aid of heat, and
mix. Apply with a flannel dauber, removing as much as possible with clean
woolen rags.


LUMINOUS PAPER.

To make paper which shall be luminous in the dark, it is sufficient to
mingle with the pulp the following ingredients in their
proportions:--Water, ten parts; pulp, forty parts; phosphorescent powder,
ten parts; gelatine, one part; bichromate of potash, one part. The paper
will also be waterproof.


SIZES AND WEIGHTS OF DRAWING PAPERS.

The following are the sizes and weights of drawing papers:

                       Inches.       Lbs.

  Emperor,             72 × 48       620
  Antiquarian,         53 × 31       250
  Double Elephant,     40 × 26-3/4   136
  Atlas,               34 × 26        98
  Columbier,       34-1/2 × 23-1/2   102
  Imperial,            30 × 22        72
  Elephant,            28 × 23        72
  Super Royal,         27 × 19        54
  Royal,               24 × 19        44
  Medium,              22 × 17-1/2    34
  Demy,                20 × 15-1/2    25
  Large Post,      20-3/4 × 16-3/4    23
  Post,                19 × 15-1/4    20
  Foolscap,            17 × 13-1/2    15
  Pott,                15 × 12-1/2    10
  Copy,                20 × 16        20


TO MAKE BRONZED PAPER.

Dissolve gum lac in four parts by volume of pure alcohol, and then add
bronze or other metal powder in the proportion of one part to every three
of the solution. A smooth paper must be chosen, and the mixture applied
with a fine brush. The coating is not dull, and may be highly burnished.

Another process consists in first applying a coat of copal or other
varnish, and when this has become of a tacky dryness, dusting bronze
powder over it. After remaining a few hours, this bronzed surface should
be burnished with an agate or steel burnisher.


TO MAKE DRAWING-PAPER TRANSPARENT.

Drawing paper of any thickness may be made perfectly transparent by
damping it with benzine. India ink and water colors can be used on this
paper. The paper resumes its opacity as the benzine evaporates, so that
any place that has not been duly traced requires to be redamped with the
benzine for that purpose. A sponge should be used for the application.


TO MAKE PAPER WATER-PROOF.

The following is a recipe for making paper water-proof:--Add a little
acetic acid to a weak solution of carpenters' glue. Dissolve also a small
quantity of bichromate of potash in distilled water, and mix both
solutions together. The sheets of paper are drawn separately through the
solution, and hung up to dry.


HOW TO SIZE POOR DRAWING PAPER.

To size poor drawing paper, take one oz. of white glue, one oz. of white
soap, and one-half oz. of alum. Soak the glue and soap in water until they
appear like jelly, then simmer in one quart of water until the whole is
melted. Add the alum, simmer again and filter. To be applied hot.


TO PREVENT ALTERATIONS IN WRITING.

The following process of preparing paper will prevent alterations in
writing:--Add to the sizing 5 per cent of cyanide of potassium and
sulphide of antimony, and run the sized paper through a thin solution of
sulphate of manganese or copper. Any writing on this paper with ink made
from nutgalls and sulphate of iron, can neither be removed with acids nor
erased mechanically. Any acid will change immediately the writing from
black to blue or red. Any alkali will change the paper to brown. Any
erasure will remove the layer of color, and the white ground of the paper
will be exposed, since the color of the paper is only fixed to the outside
of the paper without penetrating it.


TO PREVENT GUMMED PAPER FROM COCKLING.

It is well known that paper, when gummed, often cockles. To remedy this a
little glycerine or sugar should be added to the gum.


COPYING DRAWING IN COLOR.

The paper on which the copy is to appear is first dipped in a bath
consisting of thirty parts of white soap, thirty parts of alum, forty
parts of English glue, ten parts of albumen, two parts of glacial acetic
acid, ten parts of alcohol of 60°, and 500 parts of water. It is
afterwards put into a second bath, which contains fifty parts of burnt
umber ground in alcohol, twenty parts of lampblack, ten parts of English
glue, and ten parts of bichromate of potash in 500 parts of water. They
are now sensitive to light, and must, therefore, be preserved in the dark.
In preparing paper to make the positive print, another bath is made just
like the first one, except that lampblack is substituted for the burnt
umber. To obtain colored positives the black is replaced by some red,
blue, or other pigment.

In making the copy, the drawing to be copied is put in a photographic
printing frame, and the negative paper laid on it, and then exposed in the
usual manner. In clear weather an illumination of two minutes will
suffice. After the exposure the negative is put in water to develop it,
and the drawing will appear in white on a dark ground; in other words, it
is a negative or reversed picture. The paper is then dried and a positive
made from it by placing it on the glass of a printing frame, and laying
the positive paper upon it, and exposing as before. After placing the
frame in the sun for two minutes, the positive is taken out and put in
water. The black dissolves off without the necessity of moving back and
forth.


WASHING FORMS.

Forms sent down to machine ought not to be wet too much with lye or with
water, otherwise it becomes necessary to dry them before working, which
takes time and often much trouble. The wet works up little by little to
the face of the letter, and then the form becomes unworkable. It has often
to be taken off the coffin, the feet of the types have to be thoroughly
dried, then some sheets of unsized paper have to be placed under the form;
it has also to be unlocked, shaken, locked up again, the sheets removed
with the moisture they have imbibed, and then it is to be hoped the form
will be workable. If not there is nothing to be done but to lift it and
dry it by heat.

Lye is generally used for washing forms which do not contain wood blocks;
turpentine where wood-cuts or wood-letters are to be found in them. The
bristles of the lye-brush should be longer than those of the
turpentine-brush, and, in order to preserve it, each brush should be
properly washed with water after using, and shaken and stood up to dry. If
this is not done the brush will last but a short time.

There is no good in taking up with the brush a large quantity of lye or
turps, and to shed it at once. Yet this is too commonly done, regardless
of waste. In order to wash a form well the brush should be passed lightly
over all the pages, in order to wet them uniformly. Then they should be
rubbed round and round, and finally lengthwise and crosswise. Leaning on
the brush not only wears away the bristles, but sometimes injures the face
of the type, too. It is a bad practice.

After washing, before printing, a sponge with pure water should be passed
lightly over the form, and then the form should be dried with a cloth.
Care should be taken not to use a woolen cloth, which is liable to leave
little pieces on the face of the types, and to see that there are no hard
substances in it. After printing it is always best to wash with
turpentine. Lye induces oxidation of the types, while turps leave an oily
film on them, which preserves them from the action of the atmosphere.


HOW TO PREVENT OFF-SETTING.

A practical pressman says that a sheet of paper wet with glycerine and
used as a tympan-sheet will prevent off-setting. This will be found better
than using oiled sheets.


PRINTING ENVELOPES.

To prevent the lumpy particles of mucilage on gummed envelopes from
"battering" the type, use a heavy piece of blotting paper as a tympan, and
when beaten down, touch the injured part with a drop of water, which will
bring up the impression again.


TO PREVENT SET-OFF ON WRITING PAPERS PRINTED ON ONE SIDE.

To prevent set-off on writing papers printed on one side, do not lay the
sheets straight as they leave the press or machine; this will enable the
air to get between them, and wonderfully expedite the drying of the ink.
Do not allow the heap to become too heavy.


A QUICK DRYER.

A quick dryer:--Japanese gold size, 2 parts; copal varnish, 1 part; elber
powder (radix carlinæ, carline thistle), 2 parts. Incorporate well
together with a small spatula, and use in quantities to suit the
consistency of the ink employed and the rapidity with which it is desired
to dry. The usual proportion is a small teaspoonful of the dryer to about
one ounce of average good ink.


TO PREVENT WARPING IN BLOCKS AND WOOD.

To prevent warping in blocks and wood-letter used in large bills, a French
printer advises that they should be placed in a zinc basin, provided with
an air-tight lid; they should then be thoroughly saturated with paraffine
oil, and left thus for about four days, when they should be wiped with a
clean dry rag. Prepared in this way when new, wood-letter resists the
effects of lye, petroleum, turpentine, and atmospheric changes.


HOW TO KEEP ROLLERS WHEN OUT OF USE.

It is a good plan, when rollers are to be kept out of use for any
particular time, to put them away with the ink on them. It protects their
surface from the hardening effects of the atmosphere, and causes them to
retain those properties which give them the much desired "tackiness." But
about half an hour before using them, remove the ink and see that they are
really in condition again.


PRESERVATIVE OF ROLLERS WHEN NOT IN USE.

The following preservative of rollers when not in use is often
applied:--Corrosive sublimate, 1 drachm; fine table salt, 2 ozs.; put
together in 1/2 gallon of soft water. It is allowed to stand 24 hours, and
is to be well shaken before using. Sponge the rollers with the mixture
after washing.


OILS FOR LUBRICATING ROLLER MOLDS.

Sperm and lard oils are the best for lubricating roller molds. If they are
properly used, no trouble will be experienced in drawing the rollers.


CARE OF ROLLERS IN THE SUMMER TIME.

In hot, sultry weather rollers will not need sponging, as some of the
materials used in their manufacture, having an affinity for moisture, will
absorb enough humidity from the atmosphere to keep the surface soft.
Indeed, too much moisture is absorbed in close and sultry weather. Cover
the rollers while not in use with tallow (in damp weather); this will
prevent the absorbtion of moisture and keep the roller dry. When starting
up put a little tallow on the distributor. This will prevent the rollers
from sticking, and keep them cool.

The safest thing for the pressman is to have on hand, as a reserve, a set
of old, hard rollers.

Remember, it is not dry, hot weather that causes trouble so much as it is
hot moist weather. When the weather is dry, soft rollers can be used, but
when dampness comes on, take out the soft and put in the old hard rollers
that have become rejuvenated by the absorption of moisture.


TO KEEP GREEN MOULD FROM ROLLERS.

Nothing destroys the surface of a roller so much as green mould. It takes
all the life out of them. Green mould results from a damp place and a
careless pressman, and is always a disgrace to all concerned.


TREATMENT OF OLD ROLLERS.

When rollers have been lying for weeks with a coating of ink dried on to
the surface--a circumstance that often occurs, more especially when
colored inks have been used--get an ordinary red paving brick (an old one
with the edges worn away will be the best), place the roller on a board,
then dip the brick in a trough of cold water, and work it gently to and
fro on the surface from end to end, taking care to apply plenty of water,
dipping the brick in repeatedly; and in a short time the ink will
disappear. Nor is this all; for if a little care and patience is
exercised, it will put a new face to the roller, making it almost equal to
new; the coating of ink having, by keeping the air from the surface,
tended to preserve the roller from perishing. Sponge off clean.


A RECIPE FOR PRINTERS' ROLLERS.

Best white glue, one pound; concentrated glycerine, one pound. Soak the
glue over night in just enough cold soft water to cover it. Put the
softened glue in a fine cloth bag, gently press out excess of water, and
melt the glue by heating it over a salt water bath. Then gradually stir in
the glycerine and continue the heating, with occasional stirring, for
several hours, or until as much of the water is expelled as possible.
Cast in oiled brass molds, and give the composition plenty of time to cool
and harden properly before removing from the mold and inking. See that the
ink is well spread before bringing the roller in contact with type.


TEMPERATURE OF THE PRESS ROOM.

The temperature of the press or machine room ought to be as near as
possible the same as that at which the ink is manufactured--_viz._, 16° of
Reamur (68° Fahrenheit). If the temperature of the room, and consequently,
of the iron receptacles the ink is kept in, be considerably less, the
varnish of the ink will stiffen, the paper will adhere to the type and
peel off, or, if this does not occur, there will at least be too little
varnish in the ink remaining on the type, and too much carbon, which, of
course, will not sufficiently adhere to the paper, and may be wiped off
even when the paint is perfectly dry. But if the temperature of the
work-room be too high, the varnish becomes too thin, the ink loses its
power of covering well all parts of the types, which then look as if they
had been printed with lamp-oil. Colors of different hues require generally
a somewhat higher temperature than black, say 70° to 75° Fahrenheit, but
any printer who wants to see a clear and sharp impression of his types on
the paper should not neglect to look sometimes to the thermometer, too low
or too high a temperature being much oftener the cause of unsatisfactory
printing than the ink we use.


WHEN TO WASH ROLLERS.

The press or machine man must be guided by the condition of the face of
the roller, and the eyes and fingers will be the best guides. Where
machine rollers are required for a weekly newspaper, they should be washed
ready for the first set of forms, and when the number is long, a second
set should be got ready and inked to work the second side, as the paper
throws off a quantity of cotton waste, and powder, and neutralizes the
tack so necessary to the face of a good roller and a clear impression.
Should a roller require cleaning for a hurried work, the old ink may be
removed with turpentine, but must be done quickly, and immediately
distributed on the ink table, or the face will harden.


IMPROVED DRYER FOR PRINTING INK.

A small quantity of perfectly dry acetate of lead or borate of manganese
in impalpable powder will hasten the drying of the ink. It is essential
that it be thoroughly incorporated with the ink by trituration in a
mortar.


HOW TO BEND A RULE.

To bend a rule, get it thoroughly hot and let it cool slowly; this will
take the spring out, and it will stay in the shape it is bent to.


TO CLEAN GILT FRAMES.

Use a soft sponge moderately moistened with spirits of wine; allow to dry
by evaporation. Do not use a cloth, and avoid friction. Another way is to
use a very soft shaving brush, and to gently rub backward and forward a
lather of curd soap. Rinse with water at about blood heat. This applied
morning after morning to old and dirt-covered oil paintings will greatly
restore them. In adopting this plan with regard to gilt frames around
water colors or prints, be sure that not enough moisture is used to run
off the frame, or the paper will be stained. The cleaning applies to gold
frames only. Dutch metal will bear no cleaning, but a new material, not
absolutely gold, but very like it, will stand any amount of soap and
water.


CLEANING NEW MACHINERY.

As presses and machinery have their bright work covered with a compound to
keep it from rusting while shipping, parties who receive the machinery
will find benzine or kerosene oil the best articles to clean off the
compound with.


TO MAKE INVISIBLE WRITING.

To make secret or invisible writing, procure some very thin starch, with
which write with a quill pen (which should be a soft one) anything that
fancy may dictate. Suffer it to dry perfectly; examine the paper upon
which you have written, and not one letter can be distinguished by the
naked eye. Procure a little iodine, which is an elementary body, dissolve
it in water, and with a camel's hair pencil, a quill, or any other
convenient article, dipped in the solution, slightly rub the paper on the
side which has been written upon; the writing will instantly appear as
distinctly visible as if written with the finest ink ever invented.


RED PRINTING INK.

Red printing ink may be made in this way:--Boil linseed oil until smoke is
given off. Set the oil then on fire, and allow it to burn until it can be
drawn out into strings half an inch long. Add one pound of resin for each
quart of oil, and one-half pound of dry, brown soap cut into slices. The
soap must be put in cautiously, as the water in the soap causes a violent
commotion. Lastly, the oil is ground with a sufficient pigment on a stone
by means of a muller. Vermilion, red lead, carmine, Indian red, Venetian
red, and the lakes are all suitable for printing inks.


TO PREVENT ELECTROTYPE BLOCKS FROM WARPING.

To prevent electrotype blocks from warping, shrinking or swelling, place
them in a shallow pan or dish, cover with kerosene oil and let them soak
as long as possible, say three or four days. Then wipe dry and place in
the form. After the first two or three washings they may swell a little;
if so, have them carefully dressed down, and after that you will have
little or no trouble with them, and can leave them in the form just as you
would were they solid.


BLACK PRINTING INK.

To make a good, permanent black printing ink, take

  Balsam copaiva              9 oz.
  Best lampblack              3 oz.
  Prussian blue               1-1/2 oz.
  Indian red                  0-3/4 oz.
  Turpentine soap, dried      3 oz.

Grind on a stone until extreme fineness has been obtained. This ink will
work clear and sharp, and can easily be removed from the type.


SEALING WAX.

Following are formulas for making sealing wax:--Fine red sealing wax--Pale
shellac, 4 oz.; Venice turpentine, 10 drachms; English vermilion, 2 oz.
Ordinary red sealing wax--Shellac, 2 oz.; resin, 4 oz.; Venice
turpentine, 12 drachms; chrome red, 12 drachms. Cheap red bottle
wax--Resin, 10 oz.; turpentine, 1 oz.; beeswax, 1-1/2 oz.; tallow, 1 oz.;
red lead or red ochre, 3 oz. The manipulation is about the same for the
three kinds. First, the resins are melted with as low a heat as will
suffice, then the turpentine, previously warmed, is to be added, and
lastly the coloring material. The first quality is only used in sticks,
and the third, when melted, for dipping bottles in. The second can be
employed for either purpose. When the wax is used for dipping it should be
kept at a temperature just sufficient to render it liquid, as too much
heat causes it to foam and to rapidly become brittle. Even with this
precaution, it is necessary to add a little turpentine, from time to time,
to replace the essential oil lost by evaporation.


FOR MAKING DEXTRINE.

Five hundred parts of potato starch are mixed with 1,500 parts of cold
distilled water and eight parts of pure oxalic acid. This mixture is
placed in a suitable vessel on a water-bath, and heated until a small
sample tested with iodine solution does not produce the reaction of
starch. When this is found to be the case the vessel is immediately
removed from the water-bath, and the liquid neutralized with pure
carbonate of lime. After having been left standing for two days, the
liquor is filtered, and the clear filtrate evaporated upon a water-bath
until the mass has become quite a paste, which is removed by a spatula,
and having been made into thin cakes is placed upon paper and further
dried in a warm situation; 220 parts of pure dextrine are thus obtained.
When needed for making mucilage, the solution has only to be evaporated to
the proper thickness.


COLORS FOR PRINTING INKS.

The different colors, and the inks which may be made from them, are as
follows:

For Red.--Orange lead, vermilion, burnt sienna, Venetian red, Indian red,
lake vermilion, orange mineral, rose pink and red lead.

Yellow.--Yellow ochre, gamboge, and chromate of lead.

Blue.--Cobalt, Prussian blue, indigo, Antwerp blue, Chinese blue, French
ultramarine, and German ultramarine.

Green.--Verdigris, green verditer, and mixtures of blue and yellow.

Purple.--A mixture of those used for red and blue.

Deep Brown.--Burnt umber, with a little scarlet lake.

Pale Brown.--Burnt sienna; a rich shade is obtained by using a little
scarlet lake.

Lilac.--Cobalt blue, with a little carmine added.

Pale Lilac.--Carmine, with a little cobalt blue.

Amber.--Pale chrome, with a little carmine.

Pink.--Carmine or crimson lake.

Shades and Tints.--A bright red is best got from pale vermilion, with a
little carmine added; dark vermilion, when mixed with the varnish,
produces a dull color. Orange lead and vermilion ground together also
produce a very bright tint, and one that is more permanent than an entire
vermilion color. The pigments are dear; when a cheap job is in hand,
orange mineral, rose pink and red lead may be used.

Yellow.--Of the materials named, the chromate of lead makes the brightest
color. If a dull yellow be wanted, yellow ochre may be used; it grinds
easily and is very cheap.

Blue.--Indigo is excessively dark, and requires a good deal of trouble to
lighten it. It makes a fine, showy color where brightness is not required.
Prussian blue is useful, but it must be thoroughly ground. It dries very
quickly, hence the roller must be frequently cleaned. Antwerp blue is very
light and easily worked. Chinese blue is also available. As already said,
the shade may be varied with flake white. There is this objection to
Prussian, Antwerp, and Chinese blues, that they are hard to grind, and
likely to turn greenish with varnish when used thin. A bright blue is also
to be got from cobalt, or French or German ultramarine. This is cheap,
easily ground, and works freely. Lime blue may also be used.

Green.--Any of the yellows and blues may be mixed. Gamboge, a transparent
color, is very useful in mixture with Prussian blue; or chromate of lead
and Prussian blue may be used. The varnish, having a yellow tinge, has an
effect upon the mixture, and should be taken into account. With a slight
quantity of Antwerp blue, varnish in itself will produce a decidedly
greenish tint. Verdigris and green verditer also give greens. If Chinese
blue be added to pale chrome, it gives a good green, and any shade can be
obtained by increasing or diminishing either color. Emerald green is got
by mixing pale chrome with a little Chinese blue, and then adding the
emerald until the tint is satisfactory.

Brown.--Sepia gives a nice tint, and burnt umber a very hot tint. Raw
umber gives a brighter brown, bistre a brighter still.

Neutral tints are obtained by mixing Prussian blue, lake and gamboge.

In using painters' colors, it is advisable to avoid, as much as possible,
the heavy ones.

Tints of any desired depth may be made by using a finely-ground white ink
as a basis, and toning it with the color desired.

Varnish tints are made by adding color to full-bodied, well-boiled
printers' varnish, using a little soap and drying preparation to make them
work smoothly and dry quickly.

In mixing tints to print with, the muller should be used to rub in the
colors thoroughly, otherwise the work is liable to be streaky. It is
advisable to mix no more of a tint than is needed for the work in hand.
Most colored inks work best if applied to the rollers a little at a time,
until the depth of color desired is reached, as colored inks distribute
slower than black, and are more liable to thicken upon and clog the type
when too much is taken at once.


HINTS ON "CASTING UP."

The most simple and effective contrivance for casting-up work is, for
every printer to set up, in vertical parallel lines, the m's of each font
in his office, with figures in succession beside them, and work them upon
good hard paper, but little wet or pressed, which ought to be dried very
gradually. If the cast-up work printed with the same type as these
measures very little variation will be found; for if the measure and the
measured page do vary from the measurement, the one is compensated by the
other. But even this method can scarcely be trusted in setting the price
with the compositor, since the difference between a thin and thick space
will carry an en quadrat, and thus may give the turn in the 500 letters,
so as to make 1,000 difference.


HOW TO ASCERTAIN THE QUANTITY OF PLAIN TYPE REQUIRED FOR NEWSPAPER.

To ascertain the quantity of plain type required for a newspaper,
magazine, and other work, find the number of square inches and divide the
same by four; the quotient will be the approximate weight of the matter.
As it is impossible to set the cases entirely clear, it is necessary to
add 25 per cent to large fonts, and 33 per cent to small, to allow for
dead letter. This, of course, is only approximate, but will be found
sufficiently close for all practical purposes.


CARE OF WOOD-CUTS.

Care should be taken that wood-cuts are thoroughly dry before being sent
to the foundry, as the intense heat to which they are subjected frequently
causes them to warp and split, especially if pierced.


REMEDY FOR TYPE THAT STICKS IN DISTRIBUTING.

Great difficulty is sometimes experienced in distributing type which has
been allowed to remain in form for any length of time. Prevention, of
course, is better than cure; but where the remedy is required, the
following may be tried with advantage:--Pour boiling water over the type,
and allow it to stand for about half an hour. Repeat, if necessary, until
the desired effect has been obtained.


LAYING TYPE.

The page as received from the founder, should be carefully unwrapped, and,
after having been placed on a galley, soaked thoroughly with thin soap
water, to prevent adhesion after the types have been used a short time;
then, with a firm rule or reglet, as many lines should be lifted as will
make about an inch in thickness, and, placing the rule close upon one side
of the bottom of the proper box, slide off the lines gently, taking care
not to rub the face against the side of the box. Proceed then with
successive lines till the box is filled. Careless compositors are prone to
huddle new type together, and grasping them by handfulls plunge them
pell-mell into the box, rudely shaking them down to crowd in more. This
should never be allowed, as shaking does more injury to type than press
wear. The type left over should be kept standing on galleys in regular
order till the cases need to be again filled or sorted.


TO FIX BRONZE COLORS ON GLASS.

Bronze colors can be fixed upon glass or porcelain by painting the
articles with a concentrated solution of potash water glass of 30° B., and
dusting them with the bronze powder. The latter adheres so firmly that it
will not be affected by water, and may be polished with steel or agate.


TO DESTROY BOOK WORMS.

For the destruction of book worms, put the books into a case which closes
pretty well, and keep a saucer supplied with benzine within it for some
few weeks. Worms, larvæ, eggs--all are said to be got rid of.


TINNING PAPER AND CLOTH.

The following is a method of tinning paper and cloth:--Zinc powder is
ground with an albumen solution, the boiling mixture is then spread over
the tissue by means of a brush, when dry, the layer is fixed by dry steam,
which coagulates the albumen, and the tissue is then taken through a
solution of tin. Metallic tin is reduced, and sets in a very thin layer.
The tissues of paper are then washed, dried and hot pressed.


CARE OF BOOKS.

Books should be shelved in the coolest part of the room, and where the air
is never likely to be overheated, which is near the floor, where we
ourselves live and move. In the private libraries of our residences a
mistake is often made in carrying the shelving of our book-cases so high
that they enter the upper and overheated stratum of air. If anyone be
skeptical on this point, let him test, by means of a step-ladder, the
condition of the air near the ceiling of his common sitting-room on a
Winter evening, when the gas is burning freely. The heat is simply
insufferable.


HOW TO PREVENT MILDEW ON BOOKS.

To prevent mildew on books, lightly wash over the backs and covers with
spirits of wine, using as a brush the feather of a goose quill.


A CHEAP LYE.

Boil six gallons of water and add while boiling one pound of unslacked
lime and four pounds of common soda. When cold, it should be carefully
dipped out, leaving the dregs of the lime at the bottom of the vessel, and
it is then fit for immediate application. Cost, about two cents per
gallon.


A GOOD DRYER.

A good dryer for printers' use is made by taking a small quantity of
perfectly dry acetate of lead or borate of manganese in impalpable powder
will hasten the drying of the ink. It is essential that it should be
thoroughly incorporated with the ink by trituration in a mortar.


A STRONG LYE.

A very strong printers' lye may be made as follows:--Take of table salt, 2
oz.; unslacked lime, 2 lb., and bruised Scotch washing soda, 2 lb. Mix
together in three gallons of water, stirring frequently until the
ingredients are dissolved, when the lye will be ready for use. This is a
powerful mixture, and will wash off almost any color.


EFFECT OF PETROLEUM OIL ON WOOD TYPE.

Although petroleum oil is a highly useful fluid for cleansing wood letter
or wood-cuts, the printer should be cautioned that it is highly
detrimental to type and stereoplate. While it has no effect in opening the
pores of the wood, but on the contrary, hardens the surface, rendering the
face peculiarly smooth, it corrodes or rots the metal, and leaves a white
powder on the face, which, although it may be removed with a brush, shows
that the type has been injured. Besides this, petroleum is highly
dangerous on account of its inflammability. It cannot be extinguished by
water.


A BRONZE OR CHANGEABLE HUE.

A bronze or changeable hue may be given to inks with the following
mixture:--Gum shellac, 1-1/2 lb., dissolved in one gallon of 95 per cent
alcohol or Cologne spirits for 24 hours. Then add fourteen ounces aniline
red. Let it stand for a few hours longer, when it will be ready for use.
When added to a good blue, black, or other dark inks, it gives them a rich
hue. The quantity used must be very carefully apportioned.

In mixing the materials, add the dark color sparingly at first, for it is
easier to add more, if necessary, than to take away, as in making a dark
color lighter, you increase its bulk considerably.


GOLD LEAF PRINTING.

Gold leaf printing requires much more care than bronze printing, but if
properly managed will be found to be a great improvement. Ink should be
made of chrome yellow, mixed with Venice turpentine, virgin wax and
varnish. Cut the gold leaf into slips a shade wider than the lines it is
to cover, ink the form in the usual way, and pull a sheet; then lay on the
gold leaf with no great harm. Some colors will not keep at all, and
others deposit at the bottom of the can almost all their solid
ingredients. It is not easy to alter this, but colza oil will at least
prevent the surface skinning over.


TO PREVENT COLORED INKS FROM BECOMING HARD.

Red and some other colored inks are often found to become so hard in a few
weeks after the can has been opened that the knife can scarcely be got
into them, and they cannot be got to work at all. Oil, varnish and
turpentine are of no use in such a case; the remedy is paraffine oil mixed
well up with the old ink. Many prefer paraffine oil rather than boiled oil
or turps for thinning down both black and colored inks.


TO KEEP COLORED INKS FROM SKINNING.

Colored inks can be kept from "skinning" by pouring a little oil or water
on the top and closing the can tightly.


HOW TO REMOVE COLORED INKS.

Benzine is a powerful chemical preparation which may be used to remove
colored inks when lye and turpentine fail. It should, however, not be used
after dark, as it is very inflammable, and it should be kept out of doors
if possible.


A VARNISH FOR COLOR PRINTS.

To make a varnish for colored prints, etc., take of Canada balsam, 1
ounce; spirits of turpentine, 2 ounces, and mix well together. The print
or drawing should first be sized with a solution of isinglass in water,
and when this has dried the varnish above named should be applied with a
camel's hair brush.


REPAIRING BATTERED WOOD TYPE.

Wood type when battered may be repaired by removing the damaged part with
a sharp pointed knife, and fill in with beeswax or gutta-percha.


INKING SURFACES FOR COLOR WORK.

The best inking surfaces or slabs for color work at press or machine are
porcelain, litho stone, marble or slab. Metals are injurious to colored
inks--even polished iron surfaces give a dullness to bright colors.


HOW TO PRESERVE COLORED INKS.

If it is necessary to keep colored inks, the best way of preserving them
so that they shall be workable after standing some time is to pour a
little colza oil on the top, and securely close the vessel containing
them. This oil will not generally rob the ink of any of its color, and
even if it is not all poured off afterwards, its presence can do a piece
of cotton wool; when dry, it may be washed in the same way as bronze.
Rolling afterward will improve it very much.


HOW TO BRIGHTEN COMMON QUALITIES OF COLORED INKS.

Common qualities of colored inks may be brightened by using the whites of
fresh eggs, but they must be applied a little at a time, as they dry very
hard and are apt to take away the suction of rollers if used for any
lengthend period.


PRINTERS' VARNISH.

For fine work, a little Canada balsam of the consistency of honey makes a
good varnish of great purity. The coarser but similar Venice turpentine
may also be used with effect where time is precious and purity of tint not
indispensable. A little soft soap may be added to the Venice turpentine.

If the work be coarse and varnish not at hand, a little oak varnish and
soft soap form a good substitute.


TO PREVENT OFF-SETTING.

Setting off may be prevented by slightly greasing or oiling a sheet which
may be placed on the tympan if in press work, or the cylinder if at a
machine. This will answer for several thousands without requiring to be
replaced.


A HARDENING GLOSS FOR INKS.

A hardening gloss for inks may be made by dissolving gum arabic in alcohol
or a weak solution of oxalic acid. This mixture should be used in small
quantities, and mixed with the ink while it is being consumed.


A MODELING MATERIAL.

Some pretty effects can be produced by the use of a composition made by
thoroughly mixing rice flour with cold water, and allowing it to gently
simmer over the fire until a delicate and durable cement results. When
made of the consistency of plastic clay, models, busts, etc., may be
formed, and the articles when dry resemble white marble, and will take a
high polish, being very durable. Any coloring matter may be used at
pleasure.


LEAF COPYING.

Take a piece of thin muslin and wrap it tightly round a ball of cotton
wool as big as an orange. This forms a dabber, and should have something
to hold it by. Then squeeze on to the corner of a half-sheet of foolscap a
little color from a tube of oil paint. Take up a very little color on the
dabber, and work it about on the center of the paper for some time, till
the dabber is evenly covered with a thin coating. A little oil can be used
to dilute or moisten the color if necessary. Then put your leaf down on
the paper and dab some color evenly over both sides. Place it then between
the pages of a folded sheet of paper (unglazed is best), and rub the paper
above it well all over with the finger. Open the sheet, remove the leaf,
and you will have an impression of each side of the leaf. Any color may be
used. Burnt or raw sienna works the most satisfactorily.


DRYER FOR RULING INKS.

Ruling inks are made to dry quickly by using half a gill of methylated
spirits to every pint of ink. The spirit is partly soaked into the paper
and partly evaporates; it also makes the lines firm.


SIZE OF NEWSPAPER SHEETS AND NUMBER OF COLUMNS.

  Width of Column            Paper.      Column Rules.
  13 Ems Pica.

  5 Column Folio            20 × 26       17-3/4 in.
  6   "      "              22 × 31       19-3/4  "
  6 Col Fo (wide margin)    22 × 32       19-3/4  "
  7 Column Folio            24 × 35       21-3/4  "
  7 Col Fo (wide margin)    24 × 36       21-3/4  "
  8 Column Folio            26 × 40       23-3/4  "
  9   "      "              28 × 44       26      "
  4   "    Quarto           22 × 31       13-3/4  "
  4 Col Qu (wide margin)    22 × 32       13-3/4  "
  5  "   "                  26 × 40       17-3/4  "
  6  "   "                  30 × 44       19-3/4  "
  7  "   "                  35 × 48       21-3/4  "


USUAL SIZES AND WEIGHTS OF NEWS PRINTING PAPER.

      Size.               Weight per Bundle.

      22 × 30                        44 lbs.
      22 × 32                 45 and 50  "
      24 × 36         50, 56, 60 and 70  "
      26 × 38                 60 and 70  "
      26 × 40     65, 70, 75, 80 and 90  "
      28 × 40                        80  "
      28 × 42        70, 80, 90 and 100  "
      28 × 44            85, 90 and 105  "
      29 × 48                       100  "
      29 × 58                       110  "
      30 × 44            90, 95 and 100  "
      31 × 44            90, 95 and 100  "
      31 × 45                        96  "
      22 × 44       90, 95, 100 and 120  "
      32 × 46                       100  "
  34-1/2 × 47-1/2                   120  "
      35 × 48                       120  "


USUAL SIZES AND WEIGHTS OF BOOK PAPERS.

   Size.                    Weight per Ream.

  22 × 32                           30, 35 and 40 lbs.
  24 × 36                       30, 35, 40 and 50  "
  25 × 38      35, 40, 45, 50, 60, 70, 80 and 100  "
  28 × 42         40, 50, 60, 70, 80, 100 and 120  "
  32 × 44                 60, 70, 80, 100 and 120  "


USUAL SIZES AND WEIGHTS COLORED PRINT OR POSTER.

   Size.         Weight per Ream.

  24 × 36                    25 lbs.
  25 × 38                    27  "
  28 × 42     35, 40, 45 and 50  "


USUAL SIZES OF FLAT AND LEDGER PAPERS.

  Flat Letter               10 × 16
  Flat Foolscap             13 × 16
  Packet Post               12 × 19
  Cap                       14 × 17
  Crown                     15 × 19
  Double Flat Letter        16 × 20
  Demy                      16 × 21
  Folio Post                17 × 22
  Check Folio               17 × 24
  Medium                    18 × 23
  Double Flat Foolscap      16 × 26
  Bank Folio                19 × 24
  Royal                     19 × 24
  Double Cap                17 × 28
  Super Royal               20 × 28
  Double Demy               21 × 32
  Double Demy               16 × 42
  Imperial                  23 × 31
  Double Medium             23 × 36
  Double Medium             18 × 46
  Elephant                  23 × 28
  Colombier                 23 × 34
  Atlas                     26 × 33
  Double Royal              24 × 38
  Double Elephant           27 × 40
  Antiquarian               31 × 53




Transcriber's Notes:

Passages in italics are indicated by _underscore_.

Passages in bold are indicated by =bold=.

The following misprints have been corrected:
  "Lables" corrected to "Labels" (Index to Recipes)
  "Sett-off" corrected to "Set-off" (Index to Recipes)
  "I" corrected to "1" (page 5)
  missing word "is" added (page 13)
  missing word "A" added (page 14)
  "Gildng" corrected to "Gilding" (page 19)
  missing word "be" added (page 29)
  "homoegeneous" corrected to "homogeneous" (page 35)
  "posssble" corrected to "possible" (page 39)
  "condiitons" corrected to "conditions" (page 48)
  "a a" corrected to "a" (page 50)
  "receipe" corrected to "recipe" (page 56)
  missing word "a" added (page 67)
  "he" corrected to "the" (page 74)
  "when" corrected to "When" (page 80)






End of Project Gutenberg's Paper and Printing Recipes, by J. Sawtelle  Ford