Produced by Don Kretz, Juliet Sutherland, Charles Franks and the DP Team




[Illustration]




SCIENTIFIC AMERICAN SUPPLEMENT NO. 492




NEW YORK, JUNE 6, 1885.

Scientific American Supplement. Vol. XIX, No. 492.

Scientific American established 1845

Scientific American Supplement, $5 a year.

Scientific American and Supplement, $7 a year.


       *       *       *       *       *


TABLE OF CONTENTS.

I.    ENGINEERING AND MECHANICS.--The New Spanish Artillery.--2
      engravings.

      Qualitative Tests for Steel Rails.--By L. TETMAJER.

      A New Form of Small Bessemer Plant.--By A. TRAPPEN.

      Triple Compound Engines.--A paper read by A.E. SEATON
      before the Institution of Naval Architects.

      Early History of the Steam Jack.

      Bridge over the River Adige, at Verona.--13 figures.

      Pumping Machinery.--Mine pumps.--Direct acting steam pumps.
      By E.D. LEAVITT.

      Improved Gun Pressure Gauge.--2 figures.

      Measuring the Thickness of Boiler Plates.

      On an Express Engine.


II.   TECHNOLOGY.--Improved Plaiting Machine.--With engraving.

      Self-acting Shuttle Guard.--1 figure.

      Ruler and Triangle for Hatching.

      The Distillation of Sea Water.--1 figure.

      Aids to Correct Exposure on Photographic Plates.--An
      interesting paper by W. GOODMAN.

      Isochromatic Photography.--By FRED. E. IVES.--2 figures.

      Distortion from Expansion of the Paper in Photography.


III.  ELECTRICITY, ETC.--On the Fritts Selenium Cells and
      Batteries.--A paper read before the American Association
      by C.E. FRITTS.

      Electricity Applied to the Manufacture of Varnish.--2 figures.

      Naglo Brothers' Telephone System.--3 figures.

      The Gerard Electric Lamp.--1 figure.

      A New Reflecting Galvanometer.--3 figures.


IV.   ART AND ARCHITECTURE.--Groups of Statuary for the Pediment
      of the House of Parliament in Vienna.--2 engravings.

      The Casino at Monte Carlo.--An engraving.


V.    PHYSICS.--Determining the Density of the Earth.--1 figure.

      Physics without Apparatus.--The Porosity and Permeability of
      Bodies.--A Hot Air Balloon.--2 engravings.


VI.   NATURAL HISTORY.--Winter and the Insects.--An engraving.

      Silk Worm Eggs.--With engraving.


VII.  HORTICULTURE.--The Melleco.--Ullucus tuberosa.--With
      engraving.


VIII. PHYSIOLOGY, MEDICINE, ETC.--Histological Methods.--Section
      cutting machines.--Methods of preserving the
      tissues.--Preservative media.--Preparation for mounting
      tissues.--1 figure.

      Life History of a New Septic Organism.

      Erythroxylon Coca as a Therapeutic Agent.--By Dr. E.R. SQUIBB.

       *       *       *       *       *




NEW SPANISH ARTILLERY.


The Spanish Government is now engaged in supplying some of its principal
fortifications with heavy guns of the most improved construction. The
defenses of Cadiz and Ceuta have been greatly strengthened in this
respect. The most recent additions are some very powerful Krupp guns for
the fortress of Isabel II., at Mahon.

[Illustration: NEW KRUPP BREECH LOADING GUNS FOR SPANISH FORTIFICATIONS.]

We give engravings from photographs, as presented in _La Illustracion
Española_. These guns are breech loaders, of steel, 30½ centimeters
caliber, or 12 inches, 49 tons weight.

[Illustration: NEW KRUPP BREECH LOADING GUNS FOR SPANISH FORTIFICATIONS.]

One of our engravings shows the great revolving crane by which the guns
were lifted and placed on the truck for conveyance over a track to their
intended position. This crane is worked by eight men, and readily lifts
burdens of about 200,000 lb. The other engraving shows the jack frame and
jacks employed to remove the gun from the temporary truck. At a range of
7,000 yards these guns are able to penetrate iron plates of two feet
thickness.

       *       *       *       *       *




QUALITATIVE TESTS FOR STEEL RAILS.

By Mr. L. TETMAJER.


This memoir is the first of a series upon the unification of nomenclature
and classification of building materials, undertaken by the author at the
request of the Swiss Engineers' and Architects' Union. For its
preparation numerous mechanical tests have been made upon steel rails,
both good and bad, taken from the Swiss railways, while the corresponding
chemical analyses have been made by Dr. Treadwell in the Polytechnic
Laboratory, at Zurich. The results are given for twenty-two examples,
about one-half of which have stood well, while the remainder have either
broken, split, or suffered considerable abrasion in wear; but in many
instances the mechanical test of tensile strength, elongation, and
contraction, and the figures of quality (Wohler's sum and Tetmajer's
coefficient) deduced from these have varied very considerably for the
results obtained in practice.

The best wearing rails, which often give contradictory results with the
tensile test, were comparatively pure manganese steels, low in silicon,
only exceptionally up to 0.2 per cent., but generally below 0.1 per
cent., and with less than 0.1 per cent. of phosphorus and sulphur. On the
other hand, rails with a tendency to break or split are low in carbon,
with variable proportions of manganese, but contain much silicon, 0.3 to
0.9 per cent., and often above 0.1 per cent. of phosphorus. Another
series of experiments upon rails for the Finland lines made by the author
in 1879-80 shows the high quality of manganese steel. These are
essentially highly carburized (0.3-0.4 per cent. carbon) with 0.7 to 1.4
per cent. manganese, and have stood three and a half years' wear without
a single one being broken; while those of silicon steel with 0.106-0.144
per cent. carbon, 0.592-0.828 manganese, and 0.423-0.435 silicon have
failed in many cases, showing a great tendency to split. In both of the
latter instances, however, the figures deduced from tensile tests of both
good and bad specimens were substantially the same.

The causes of the difference between the two kinds of steel the author
attributes to differences in the structure of the ingot due to the agent
used in "chemical consolidation," which may be either manganese or
silicon, which structures are illustrated by photographs of ingot
fractures. When silicon is used there is a tendency to unsoundness about
the exterior of the ingot, which is surrounded by a honeycomb-like
cellular casing of greater or less depth; while with manganese the
vesicular cavities are more or less dispersed through the whole
substance, or concentrated toward the interior of the ingot. Rails made
from the former are, therefore, more likely to contain unsound portions
near the outer wearing surface, and to give unsatisfactory results in
wear, than those from the latter; but as the test pieces are usually cut
from the center of the railhead, the tensile resistance of the interior
may be equal to or surpass that of the superior material. In summing up
his observations the author concludes that the method of tensile testing
is mainly of value in determining the quality of the material, but that
for the finished product properly arranged falling weight tests are
necessary. He also considers that the test pieces should be flat bars of
2.5 to 3.5 centimeters in area, cut as near as possible to the outer
surface of both head and foot of the rail. He reprobates especially the
research for microscopic imperfections (mikrobensücherei) upon the
fractured surfaces, as an annoyance to the producer, and perfectly
useless to the consumer.--_Stahl und Eisen_, vol. iv., page 608; through
_Proc. Inst. Civ. Eng_.

       *       *       *       *       *




A NEW FORM OF SMALL BESSEMER PLANT.

By Mr. A. TRAPPEN.


The success of the Bessemer process when carried out on the small scale
at Avesta in Sweden, as described by Professor Ehrenwerth, and subsequent
experiments of a similar kind made at Pravali, in Carinthia, and
elsewhere, have led the author, who is specially occupied in the building
of Bessemer works, to design a plant suitable for operation upon small
charges. This consists essentially of a converter about 1 meter outside
diameter, and 1.5 meters high, connected by a single trunnion to a
horizontal steel shaft carried by the arm of a hydraulic crane which is
very similar in character to the ladle crane of a large sized converter.
The sweep of the crane is such as to allow the converter to be brought
close up to the tap hole of the blast furnace or cupola, so that the use
of open gutters for the fluid metal may be avoided as much as possible.
The converter is turned on its axis by a screw and worm wheel, which is
manipulated by a workman standing on a platform at the opposite arm of
the crane. The blast is brought in from above by a pipe down the central
pillar of the crane, which is connected with the blast-main by a flexible
tube and packed joint. The outer trunnion bearing is open, so that by
slightly raising and lowering the ram of the crane, the converter may be
left suspended to a weighing machine in front of the furnace, if it is
required to determine the weight of the charge. When the converter is
filled, it is borne by the crane into a convenient position for blowing,
and if the basic method is followed for removing the slag, the converted
metal is cast into ingot moulds, which are manipulated by a small ingot
crane of the ordinary pattern. In the case of small existing
blast-furnaces, which usually have their tap holes near to the ground, it
may be necessary to have a shallow ingot pit (20 to 24 inches deep); but
with cupolas this will not generally be necessary, and the whole of the
operations may be carried on at the ground level. Each crane is intended
to be supplied with two or three converters, so that operations may be
carried on continuously. The weight of charge proposed is 15 cwt., which
should under ordinary conditions give 12 cwt. of ingots. Taking the time
of a single converting operation at half an hour it will be easy to
obtain fifty blows per day, or a production of 30 tons. This may be
easily increased by placing a second converting crane on the other side
of the furnace, for which the same blowing engine will be sufficient, as
the actual blowing time will not exceed twelve minutes. The labor
required for each converter will be about six men per shift.

The blast required has been experimentally determined at 40-50 cubic
meters per minute at 15 lb. pressure. This will be supplied by a single
cylinder engine of 900 millimeters blast, and 786 millimeters steam
piston, diameter 786 millimeters, stroke making fifty revolutions per
minute, which is also to work a Root blower and the accumulator pumps.
Having regard to these very different demands upon the power of the
engine, it will be provided with expansion gear, allowing a considerable
variation in the cut-off. A single boiler of 70 to 75 square meters
heating surface will be sufficient. The accumulator is intended to work
at 300 lb. pressure.

The cost of the plant, including one of each of the following items,
converter, converter truck, blowing engine, accumulator, ingot crane,
centesimal weighing machine, and accumulator pump, is estimated at £2,050
to £2,100; and that of the steam boiler, £325. The buildings may be of
the simplest and cheapest possible character. As the productive power of
such a plant contrasts very favorably with its cost, the author considers
that it may be fairly expected to meet the competition of large works,
especially in the manufacture of a high-class product.--_Stahl und
Eisen_, vol. iv., page 524; through _Proc. Inst. Civ. Eng_.

       *       *       *       *       *




TRIPLE COMPOUND ENGINES.

[Footnote: Paper read before the Institution of Naval Architects, March
27, 1885.]

By Mr. A.E. SEATON.


My attention was first called to the modern triple compound engine by the
published reports of the trial trip of the yacht Isa, and in it I plainly
discerned the germs of a successful new type of engine; but it was not
until I had seen the engines of the screw steamer Aberdeen erected in the
workshops of Messrs. Robert Napier & Sons that I became convinced that it
was the engine of the immediate future. It is, however, due to the
farsightedness and enterprise of Mr. C.H. Wilson, M.P., that I was
enabled to try the merits of the new system and compare it with the old.
Mr. Wilson had already viewed the triple compound engine with more than
ordinary interest, and it required little persuasion on my part to allow
the company to which I have the honor to belong to construct a triple
expansion engine in lieu of the ordinary compound for one of four sister
ships which it then had in hand for Messrs. Thomas Wilson, Sons & Co.,
the latter only stipulating that it was to be of the same power as the
engine already contracted for. As I was quite convinced that economy was
due to the system rather than to the higher pressure, it was decided not
to increase the boiler pressure more than was necessary to suit the
triple system. The other three ships already alluded to were being fitted
with engines having cylinders 25 inches and 50 inches diameter by 45
inches stroke, and supplied with steam of 90 lb. pressure from a double
ended boiler 13 feet 9 inches diameter by 15 feet long, having a total
heating surface of 2,310 feet, so that these engines have every
qualification for being economical so far as general proportions go, the
stroke being an abnormally long one and the boiler of ample size.
Experience has since shown that these engines are economical in coal,
and the wear and tear exceptionally small.

The new engines for the fourth boat were made with considerably shorter
stroke, and the cylinders proportioned so as to give equal power; they
are 21 inches, 32 inches, and 56 inches diameter by 36 inches stroke, the
high pressure cylinder being supported on columns immediately over the
medium cylinder, and in other respects these engines were made as near as
possible like the other ones above named. Steam at 110 lb. pressure is
supplied from a double ended boiler 12 feet 9 inches diameter and fifteen
feet long, having a total heating surface of 2,270 square feet, and
identical in design with the boiler supplied for the other engines. The
propellers were made exactly alike in all respects, and the ships being
likewise precisely alike, a comparison of the performances of the one
fitted with the triple engines could be made with as little grounds for
differences of opinion as is possible. One of the ships fitted with the
ordinary compound engines was named the Kovno, that with the triple
compound engines the Draco. Their dimensions are as follows:

                                 Feet. Inches.
Length between perpendiculars.    270    0
Breadth.                           34    0
Depth of hold.                     18    3

And of 1,700 tons gross register. They are ordinary cargo boats, built of
steel, having a raised quarter deck and long bridge amidships, but
nothing about them otherwise requires comment.

After making a voyage or two to the Baltic, and finding that everything
was working satisfactorily, the Kovno was loaded with 2,400 tons dead
weight, and sailed in January, 1883, for Buenos Ayres; the Draco was
loaded with 2,425 tons dead weight, and sailed March, 1883, for Bombay,
the distance in both cases being about 6,400 miles. It was thought
advisable, for purposes of comparison, that the ships should steam at as
near as possible the same speed; and to attain this object, we considered
the safest plan was to instruct the engineers as to the average amount of
coal they were to burn per day, and experience with these ships on their
Baltic voyages had fixed this at 12 tons in the case of the Kovno and 10
tons in the case of the Draco. During the voyage each ship seems to have
had fair average weather, and equal care was taken in getting the best
results possible. The average speed of the Draco was, however, 8.625
knots, or 207 miles per day, the engines making on the average 57.5
revolutions per minute, while the Kovno did only 8.1 knots, or 194 miles
per day, the engines making 55.5 revolutions. The coal used was ordinary
South Yorkshire, just as it comes from the pits for bunker purposes. The
indicated horse power in each case would average about 600. The total
coal consumed was 326 tons in the Draco and 405 tons in the Kovno, or a
saving of 19.5 per cent. over the ordinary compounds, with an increase of
speed of 6.5 per cent.

In December, 1883, one of the others, the Grodno, sailed from Bombay, and
attained an average speed of 8.5 knots, or 204 miles per day, the engines
making 57 revolutions, with a coal consumption of 12.8 tons per day, or
469 tons on the voyage. The Draco's consumption is therefore 30.5 per
cent. less than that of the Grodno on the round voyage, and 20.3 percent
per day.

The success of the triple compound engine was in these instances more
than had been anticipated, and induced Mr. Wilson to go a step further.
The S.S. Yeddo had been refitted with boilers made for a working pressure
of 90 lb. per square inch, but owing to the size of the shafting the
working pressure was limited to 70 lb.; the average consumption of coal
under these circumstances on two voyages was 17 tons per day. These
boilers had a margin of safety beyond what was required by the rules when
made, and as the Board of Trade rules had been modified in the mean
while, it was found that they could with safety be worked at 100 lb. per
square inch. A third cylinder was now fitted on the top of the original
low pressure, and the safety valves loaded to the 100 lb., and the ship
was dispatched to Cronstadt. After making two voyages under similar
circumstances to the two previous ones, the average consumption was 13.5
tons per day only. In this case it was the same ship, same boilers, same
engines, same propeller, and same men, the only difference being the
addition of a third cylinder and the increase of pressure.

So far all the trials had been made with two crank engines; so it was now
decided to construct another set of engines for 150 lb. pressure, having
a crank to each cylinder. These engines had cylinders 20½ inches, 33
inches, and 58 inches diameter by 36 inches stroke, and were fitted into
the screw steamer Rosario, whose dimensions are 275 feet 3 inches between
perpendiculars, 34 feet 3 inches beam, and 19 feet 2 inches depth of
hold, 1,862 tons gross, and the deadweight capacity 2,550 tons. In March
last year she was loaded with 2,530 tons deadweight, and did the voyage
to Bombay at an average speed of 8.6 knots on a consumption of 10.5 tons
per day of South Yorkshire coal, and burnt on the voyage 347 tons. This
result is superior to that of the Draco when the size of the ship is
taken into account, but is not so much so as might have been anticipated
from the increase of pressure and the rate of expansion, which was 14.4
in the Rosario and 12 in the Draco. Another set of engines was made from
the patterns of those of the Draco, but with the high pressure cylinder
20 inches diameter, steam at 150 lb. pressure being supplied from two
single ended boilers, having a total heating surface of 2,200 square
feet. They are fitted in the S.S. Finland, a cargo boat 270 feet long, 35
feet beam, by 18 feet depth of hold, and 1,954 tons gross register. In
January she was loaded with 2,500 tons deadweight, and sailed for
Rangoon. The average speed attained was 8.42 knots per hour, or 202 miles
per day, on a consumption of 10.3 tons of Welsh coal per day, the rate of
expansion being 12. It should be mentioned that all these ships named are
fitted and steered with steam stearing gear, so that in comparing these
results and those published of the engines made by an eminent engineer in
the north of England, an allowance should be made, as in that ship there
was no steam stearing gear.

I have chosen to make all these comparisons by reference to the ships'
logs, and to give results such as a shipowner looks for rather than those
which engineers prefer to use in forming a judgment on the merits of
different engines. I do this for two reasons: first, because the
commercial success of the triple compound engine depends on the saving it
can effect in a long voyage; and secondly, because I had no reliable
indicator diagrams from which the consumption per indicated horse power
could be calculated with any degree of accuracy. On trial trips with the
steamers already named, the consumption of ordinary South Yorkshire coal
was 1.6 lb. per indicated horse power, and the consumption of water per
indicated horse power calculated from the high pressure indicator
diagrams was 1.41 in the Draco, 13.2 in the Rosario, and 13.16 with the
Finland, or taking the medium pressure diagrams, it was 12.2, 1.30, and
11.95 respectively. Twelve months ago we constructed for Messrs. Thomas
Wilson, Sons & Co., two sets of triple expansion engines of 600 indicated
horse power, one having two cranks and the other three cranks, the
engines, boilers, and propellers being otherwise exactly alike and fitted
into sister ships. The water consumed in the three crank engine is 12.93
lb., against 13.0 in the two crank, but the former drives its ship nearly
½ knot per hour faster than the latter does its, and when both ships are
driven at the same speed the consumption of coal in the three crank ship
is considerably less than in the other.

We have now entirely given up the construction of two-crank triple
expansion engines, because of the impossibility of equally dividing the
work between the cranks; for, although the engine when running appeared
to be perfectly balanced, the wear of the brasses of the crank having the
two cylinders was always considerably more than that of the other.
Placing the high pressure cylinder over the low pressure cylinder seemed
to give the most satisfactory results, but even these were far inferior
to those once obtained with the three cranks. We have lately constructed
some very small three-crank engines from which exceedingly good results
were obtained; the cylinders are only 11½ inches, 17 inches, and 30
inches by 18 inches stroke, which developed 218 indicated horse power
with a consumption of 12.8 lb. of water per indicated horse power, and
this, together with some other observations, leads me to believe that the
best economical results will be obtained by running triple expansion
engines at a much higher number of revolutions than is usual, and with a
rate of expansion not less than 12 for a steam pressure not less than 140
lb. (155 absolute). The largest engines we have made of this type so far
are those of S.S. Martello, which have cylinders 31 inches, 50 inches,
and 82 inches diameter by 57 inches strokes and indicate at sea 2,400
horse power when running at 60 revolutions with steam of 150 lb.
pressure; the consumption of Yorkshire coal is 37 tons per day average
throughout a New York voyage. Had Welsh coal been used in every case, the
results would have been very much better, for, in addition to the
superior evaporative power of Welsh coal, it is slow burning and much
more easily controlled, especially on the comparatively short grates of
these modern boilers, the quick-burning Yorkshire coal causing the safety
valves to frequently blow off when working near the load pressure unless
great care is taken by the firemen.

I trust these few particulars may be of interest to the Institution, and
especially to those members of it who are particularly interested in the
commercial success of our mercantile navy. I have purposely avoided
engineering details and technicalities of any kind, giving only such
information as will tend to give British shipowners faith in that form of
engine which will undoubtedly help them to successfully tide over bad
times, and keep the bulk of the carrying trade of the world in their
hands.

       *       *       *       *       *




EARLY HISTORY OF THE STEAM JACK.

_To the Editor of the Scientific American:_


A friend has brought me a copy of the SCIENTIFIC AMERICAN SUPPLEMENT, of
April 18, 1885, containing an article about a "steam jack."

Says Mr. J.G. Briggs, in the _American Engineer:_ "Of its origin nothing
is known." Also the invention is attributed to "Benjamin Baleh." I can
give you the true history of the "steam jack." It was invented by my
grandfather, John Bailey, of Hanover, Plymouth County, Mass. He was a
minister of some note in the Society of Friends, or Quakers.--a man of
superior mental ability, but poor in purse, for, like all early
inventors, he reaped but little pecuniary benefit from his inventions.
Among those inventions was the first iron sink in this country--if not in
the world. A few years ago that sink was in use at his old home in
Hanover. He also invented the crooked nose for the tea-kettle. Previous
to that the nose was straight. Both sink and tea-kettle were cast at the
Middleborough foundry. When he made the steam-jack he said, "In less than
fifty years the common mode of travel would be by steam." People called
him "steam mad." But about the jack. We have one in our possession of
which your cut is an exact copy. We have used it several times. We also
have the parchment _patent_, of which I send you a copy. The jacks were
not in general use, for soon after the invention the "tin kitchen," or
"Dutch oven," as it was sometimes called, was introduced, and superseded
the jack entirely, as people were afraid of being blown up by steam. The
patent says, "John Bailey, of Boston," showing that at that early date
Boston was considered the _Hub_, and that it was considered a good thing
to hail from there. Hanover is about twenty-four miles from Boston.

Trusting I have not wearied you, I am,

ANNA M. BAILEY.

Bleak House, Lynn, Mass., May 12.


COPY OF PATENT.

_United States_.

To all to whom these Presents shall come, Greeting. Whereas, John Bailey,
of Boston, in the State of Massachusetts, hath presented a petition to
the Secretary of State, the Secretary for the Department of War, and the
Attorney-General of the United States, alledging and suggesting that he
hath invented the following useful Machine, not before known or used,
that is to say: A Steam Jack, consisting of a boiler, three wheels, and
two wallowers; the steam which issues from boiling water in the said
boiler gives motion to one of those wheels by striking on buckets on its
circumference; on the outer end of the axle of the wheel is a wallower,
the rounds of which fall into the teeth of a second wheel; on the axle of
this second wheel is another wallower, the rounds of which fall into the
teeth of a third wheel; on the axle of which third wheel is a spit: and
praying that a patent may be granted therefor: and, whereas, the said
invention hath been deemed sufficiently useful and important: These are,
therefore, in pursuance of the Act, intitled an Act to promote the
progress of useful arts, to grant the said John Bailey, his heirs,
administrators, or assigns, for the term of fourteen years, the sole and
exclusive right and liberty of constructing, using, and vending to others
to be used, the said invention so far as he the said John Bailey was the
inventor, according to the allegations and suggestions of the said
petition. In Testimony whereof I have caused these Letters to be made
patent, and the Seal of the United States to be hereunto affixed. Given
under my hand, at the City of Philadelphia, this twenty-third day of
February, in the year of our Lord one thousand seven hundred and
ninety-two, and of the Independence of the United States of America the
Sixteenth. Go. WASHINGTON.

By the President,

TH. JEFFERSON.


CITY OF PHILADELPHIA, February 23, 1792.

I do hereby certify that the foregoing Letters-patent were delivered to
me in pursuance of the Act intitled an Act to promote the progress of
useful arts: that I have examined the same, and find them conformable to
the said Act.

EDM. RANDOLPH,

_Attorney-General of the U.S._

[SEAL.]

       *       *       *       *       *




BRIDGE AT VERONA.


[Illustration: BRIDGE OVER THE RIVER ADIGE, AT VERONA.]

The iron bridge which spans the Adige at Verona, of which we publish
illustrations, has been recently completed to replace an old masonry
bridge built in the fourteenth century, and which was destroyed by the
celebrated flood of 1882. In designing the new work two leading
conditions had to be fulfilled, namely, that there should be a single
opening of 291 ft. between abutments, and that this width should be left
quite unobstructed, for the river is subject to floods, which are
frequent, and very violent and sudden. For this latter reason an ordinary
form of arch, with the roadway above it, was inadmissible, since the
waterway would be seriously obstructed; the special form illustrated was,
therefore, carried into execution. The bridge, as will be seen from Figs.
1, 2, 3, and 7, consists of two main arched girders, with two vertical
sides in lattice work; these arches spring below the level of the roadway
and rise to a considerable height above it, in the center. The horizontal
girders carrying the roadway, are connected to the arches by verticals of
the form and section shown in the drawings. The longitudinal girders are
of double trellis, as will be seen by reference to Figs. 1, 12, and 16.
The following are the principal dimensions of the bridge:

                                     Ft. In.
Clear opening between abutments      291 4
Rise of arch                          32 9¾
Width of bridge                       37 4¾
Depth of arched girders                4 7

[Illustration: BRIDGE OVER THE RIVER ADIGE, AT VERONA.]

The arched girders are connected together, in the central portion, by a
system of diagonal bracing, as is shown on Figs. 2 and 7. The carriage
road on the platform consists of buckled plates resting on transverse
girders spaced 6 ft. 6 in. apart, and covered with road metal, and for
the sidewalks checkered plates are used. The ironwork in the bridge
weighs 400 tons, and cost 8,400 _l._; the abutments cost 3,600_l._,
making the total outlay on the structure 12,000_l_. The bridge was
tested by a uniformly distributed load of 82 lb. per sq. ft., and under
this stress the arched girders deflected 1.06 in. The horizontal and
vertical oscillation of the bridge, which were carefully observed and
graphically recorded by special instruments, were very slight. The
engineer of the work was Mr. G.B. Biadego, of Genoa.--_Engineering_.

       *       *       *       *       *




PUMPING MACHINERY.

[Footnote: A paper read at the Montreal Meeting of the British
Association.]

By E.D. LEAVITT, JR., Cambridgeport, Mass.

MINE PUMPING MACHINERY.


One of the earliest steam engines, of any size, introduced into America,
was erected about the year 1763, at the Schuylkill copper mine, situated
upon the Passaic River, in New Jersey. All its principal parts were
imported from England; and a Mr. Hornblower (the son, it is believed, of
the well known engineer of that name) came to this country for the
purpose of putting up and running this engine.

At the time when the manufacture of the engines for the Philadelphia
Water Works was commenced, and as late as the year 1803, we find five
engines, in addition to the one above mentioned, noticed as being used in
this country: two at the Philadelphia Water Works; one just about being
started at the Manhattan Water Works, New York; one in Boston; and one in
Roosevelt's sawmill, New York; also a small one used by Oliver Evans to
grind plaster of Paris, in Philadelphia. Thus, at the period spoken of,
out of seven steam engines known to be in America, four were pumping
engines.

In the coal regions of Pennsylvania, a simple, high pressure, single
acting Bull engine has been extensively adopted; the dimensions usually
run from 36 inches to 80 inches in diameter, and a very common stroke is
10 feet. At the Empire shaft, in the Schuylkill coal region, there is a
very fine pair of these engines, with 80 inch cylinders, working 24 inch
pumps. The stroke of both steam pistons and pumps is 10 feet. These Bull
engines are placed either vertically or on an incline, as is most
convenient for the workings. The water valves are made either double,
triple, or four beat, according as the pumps are large or small; and the
beats are usually flat, and faced with leather. Many flap-valves are also
in use. These are frequently arranged on conical seats, and work very
well.

The Bull engines, from their strength and simplicity, give very little
trouble, working year after year with astonishing freedom from accident
and slight cost of repair. No attempt is made to economize fuel, which
consists mainly of culm, which would otherwise be wasted. Of late, direct
acting steam pumps placed under ground have found much favor with mine
operators, on account of their portability and small first cost. They
usually range in size from 8 inch steam and 5 inch water cylinders by 12
inch stroke to 80 inch stream and 14 inch water cylinders by 36 inch
stroke. Great numbers of these pumps are in use all over the United
States.

A pumping engine that is remarkable for its size and peculiarities of
construction is located at the Lehigh zinc mine, at Friedensburg, Pa. It
was designed by Mr. John West, the company's engineer, and built by
Merrick & Sons, of the Southwark Foundry, Philadelphia. It is a beam and
fly-wheel engine, the steam cylinder being 110 inches in diameter, with a
stroke of 10 feet. There are two beams on the same main center, from the
outer end of which a double line of bucket and plunger pumps is operated.
The crank-shaft is underneath the steam cylinder; and there are two
fly-wheels, one on each end of said shaft, the crank-pins being fast in
the hubs of the same. There are two connecting rods, which are attached
one to each end of an end beam pin 28 inches in diameter. The main center
and crank shafts are also 28 inches in diameter; each of the two plunger
holes is 24 inches by 30 inches in section; and all the working parts are
in proportion to those heretofore mentioned.

Perhaps no mining district has ever had to contend against greater
difficulties in pumping than have faced the engineers of the celebrated
Comstock lode, Virginia City, Nev. The mines are of great depth, in some
instances 3,300 feet; and the water is hot, rising to 160 degrees Fahr.
The machinery collected at this location is of great variety and
magnitude. There are many Davey engines, both horizontal and vertical.
The Union and Yellow Jacket shafts have compound fly wheel engines of
very great power; the former having a beam, and the latter being
horizontal, with cylinders placed side by side, and pistons connected to
a massive cross-head, from the ends of which connecting rods lead to
crank pins located in the hubs of the fly-wheels, which are overhung upon
the ends of the main shaft. From the center of the cross head, a link
runs to the main pump-bob, which operates a double line of 16 inch pumps,
10 foot stroke. The steam stroke is 12 feet. Depth of shaft, 3,300 feet.

The pumping machinery used in the iron and copper districts of Michigan
usually consists of Cornish plunger pumps, which are operated by geared
engines; the latter making from three to sixteen strokes to one of the
pumps.

The largest plant of this type yet erected is that of the Calumet and
Hecla copper mine, at Calumet, Mich. There are two lines of pumps,
varying in diameter from 7 inches to 14 inches, and with an adjustable
stroke varying from 3 feet to 9 feet. The object of the adjustable stroke
is to diminish the capacity of the pumps in the dry season. Each line of
pumps is driven from a crank placed on a steel spur-wheel shaft 15 inches
in diameter, making ten revolutions per minute. The mortise spur-wheels
have a diameter of 22½ feet at the pitch line, with two rows of teeth,
each 15 inches face. The pitch is 4.72 inches. Engaging with the mortise
wheels are pinions of gun iron 4 feet 6 inches in diameter, placed on
steel shafts 12 inches in diameter, and making 50 revolutions per minute.
The 12 inch pinion shafts are driven through mortise wheels 12 feet in
diameter, and 24 inches face, by pinions 3 feet 9 inches diameter, which
make 160 revolutions a minute. The pinion shafts are driven through a
wire rope transmission from an engine located 500 feet distant. The rope
wheels are 15 feet in diameter, and make 160 revolutions a minute. The
engine is 4,700 horse power, and, in addition to driving the pumping
machinery, does the hoisting and air compressing for the Calumet mine.

In the same building with the mine pump gearing is a duplicate
arrangement for operating the man engine. In order to operate the mine
pumps and man engine for the Hecla mine, it was necessary to use rock
shafts, which are made of gun iron, and hollow; they are 32 inches in
diameter outside, with 4½ inches thickness of metal. The pump rock shaft
is 39 feet 4½ inches long over all, in two sections, and weighs 40 tons.
There are rockers placed on each end of this shaft, one of which is
connected with a crank on the mortise wheel shaft, and the other with the
surface rods that work the pump-bobs. These rods are of Norway pine, 12
inches by 12 inches in section, and 1,000 feet long. There are two bobs,
one above the other, with axes at right angles, each weighing about 25
tons. The connection from the upper bob to the lower has hemispherical
pins and brasses to accommodate vibrations in right angled planes. The
slope of the main pump is 39 degrees, and the machinery has been designed
to raise water from 4,000 feet depth. The pumps are of the usual Cornish
plunger type, with flap valves. There is an auxiliary engine, of the
Porter-Allen type, for driving the pumps and man engines when the main
engine is not working. It makes a 160 revolutions per minute, the same as
the rope wheels The seeming complication of the arrangement is due to the
fact that it had to be adapted to existing works, for increased depths,
and put in without interfering with the daily operation of the mine.

The Calumet & Hecla Mining Company has also an extensive pumping plant at
its stamp mills, which are located on the shore of Torch Lake, about four
and a half miles from the mine. There are located here 3 pumping engines;
two of which have a capacity of 20,000,000 gallons a day, and a third
10,000,000 gallons a day. The water is elevated between 50 and 60 feet,
and is used for treating the stamped rock. Two of the engines are of the
inverted compound beam and fly-wheel type; and the third is a geared
pump, which has a horizontal double acting plunger, 36 inches in
diameter, by six foot stroke, driven from the crank of a spur-wheel
shaft.

The spur wheel is 12 feet diameter, 24 inches face, and contains 96
teeth. The pinion engaging with it has 27 teeth, and is fast on the
fly-wheel shaft of a Brown horizontal engine, having a cylinder 18 inches
in diameter, and a stroke of four feet. The steam pressure used is 110
pounds per square inch; and the engine has a Buckley condenser. The pump
valves are annular, of brass, faced with rubber, and close by brass
spiral spiral springs. Their external diameter is six inches, and the
lift is confined to ½ inch. There are 91 suction and 91 delivery valves
at each end of the pump. The maximum speed of this pump is twenty-six
double strokes a minute.

The largest of the compound engines is named Ontario, and has a vertical
low pressure cylinder 36 inches in diameter, and an inclined high
pressure cylinder 17½ inches in diameter; the stroke of both being five
feet. These are inverted over a beam, or rocker; and the pistons are
connected to opposite ends of the same.

The beam attachment of the main connecting rod is made to a pin located
above and midway between the pins for piston connections.

The main center of the beam and the crank shaft have their pedestals in
the same horizontal plane. The throw of the crank is five feet. There are
two differential plunger pumps, having upper plungers 20 inches in
diameter, and lower plungers 33 inches in diameter, with a stroke of 5
feet. These pumps are vertical, and placed beneath the engine bed-plate,
to which they are attached by strong brackets. The pump under the low
pressure cylinder is worked directly from its cross-head by an extension
of the piston rod. The other pump is worked by a trunk connection from
the opposite end of the beam. The radius of the beam is but fifty inches,
but the connections to it are made very long by links.

The lower plungers work through sleeves in diaphragms located in the
center of the pumps. In these diaphragms, the openings for the delivery
valves are made. These valves are similar in construction to those
previously described for the horizontal plunger pump. Their diameter,
however, is but 5¼ inches, instead of 6 inches, and there are 72 suction
and 72 delivery valves for each pump. It will readily be seen that the
action of these pumps is similar to that of the bucket and plunger; each
pump having one suction and two deliveries for each revolution of the
engine. The Ontario is designed to run at a maximum speed of 33
revolutions a minute; and the service required of it is to run regularly
144 hours a week, without a stop, which is performed with the utmost
regularity.

The differential pump was invented and patented, many years since, by a
party named James Ramsden, in Pennsylvania, who designed it for an
ordinary house pump. It was subsequently reinvented by the writer, who
first ascertained that he was not the original inventor upon applying for
a patent. A pump of this description was run at the Hecla mine for
several years, at a speed of 500 feet a minute; and its performance was
in every way satisfactory.


DIRECT ACTING STEAM PUMPS.

This class of machinery deserves a prominent place, as the number in use
vastly exceeds those of all other types combined.

The first consideration will be given to the Worthington, which is the
pioneer of its type, having been invented by the late Henry R.
Worthington, and patented in 1844. Mr. Worthington's first pump was
designed for feeding boilers. His first water works engine was built for
the city of Savannah, Ga., and erected in 1854. The second engine, which
was the duplicate of the Savannah engine, was erected at the city of
Cambridge, Mass., in the year 1856, and was guaranteed to deliver 300,000
gallons in twenty-four hours to an altitude of 100 feet. It had a high
pressure cylinder 12 inches in diameter, placed within a low pressure
cylinder 25 inches in diameter; the low pressure piston being annular.
The double acting water plunger was 14 inches in diameter, and worked
directly from the high pressure piston rod; the stroke of pistons and
plunger being 25 inches. This engine was tested in 1860, with the result
of a duty equal to 70,463,750 foot pounds per 100 pounds of coal.
Subsequently, a test made by Mr. Frederick Graff, of Philadelphia (long
prominently connected with the Philadelphia Water Department), and the
late Erastus W. Smith, of New York, developed a duty of 71,278,486 foot
pounds per 100 pounds of coal, which long remained the best record in the
United States. In 1863, Mr. Worthington brought out at Charleston, Mass.,
his crowning success, the duplex engine, which fairly deserves to be
placed first among the hydraulic inventions of this century. This engine
has since been more extensively duplicated for water works purposes than
any other, with the possible exception of the Cornish.

       *       *       *       *       *




IMPROVED GUN PRESSURE GAUGE.


The following description of the construction and mode of action is by
Thomas Shaw, M.E., Philadelphia, the inventor.

[Illustration: IMPROVED GUN PRESSURE GAUGE.]

Fig. 1 represents the gauge secured to small ordnance, the gun shown in
cross section. Fig. 2 represents face view of the gauge and indicator,
exposing a vertical section through the hydraulic portion of the gauge,
on line 3 and 4 of Fig. 1. The same principles of reduction of high
pressure are used in this gauge as in Shaw's hydraulic gauge. It will be
observed that a solid steel piston, E, in the cylinder, A, is provided
with a plunger on its under side, which comes in contact with an elastic
packing, D; the plunger may stand as 1 to A 1,000, or as 1 to A 100, in
point of area of exposed surface, as compared with the large piston head,
as desired. Assuming the proportions to be 1 to A 1,000, the 1,000 lb.
pressure on the plunger means only 1 lb. pressure in the fluid chamber,
above piston head, E, and this greatly reduced pressure is now
susceptible of measurement by any of the ordinary light pressure
instruments for measuring pressures. All the passage ways connecting to
dial gauge, R, with the fluid chamber above piston, E, are filled solid
with fluid, permitting no air spaces that can be avoided. The steel plug,
L, that forms a passage way between the fluid chamber and the dial gauge,
is provided on one side with a small screw hydraulic pump, with a
reservoir supply of fluid. This part is shown in longitudinal section;
the steel plunger, I, is firmly secured to wheel, F, the long hub, H, of
which is provided with a screw thread on its inner side, which thread
screws upon the exterior of pump barrel, K. After first filling the
interior of the pump barrel with fluid, the said hub is screwed upon the
pump barrel, causing the plunger, I, to force the fluid into the fluid
chamber and passage way leading to the dial gauge, causing the hand or
pointer to move to any predetermined pressure on dial, in advance of
pressure applied in the high pressure chamber at D. The purpose
accomplished in this act is to give the least possible movement of the
pointer to record any maximum pressure, as, for example, assuming that
20,000 lb. was the expected pressure from any one explosive, then the
pointer, by the means above described, can be set at, say, 18,000 lb., in
which event the pointer is reduced to the minimum movement of only 2,000
lb. to register 20,000 lb.

It will be evident that much greater accuracy of measurement of maximum
pressures can be obtained by the minimum movement of the pointer, as both
the inertia and the momentum are reduced to the minimum quantity. The
subsidence of pressure resulting from explosives being about as sudden as
the creation of pressure, causes the pointer to move too rapidly for
correct ocular observation, on which account a static electric current is
employed, causing a stream of electric sparks to shoot off from the end
of the pointer, B, to the brass outer ring, M. The gauge is insulated for
that purpose by glass plate, S, which is secured concentrically to the
gauge proper and the ring, M. Binding posts for the electric wires are
provided at O and P, which wires are shown in Fig. 2. A spring clamp, N,
Fig. 2, enables the insertion of chemically prepared or other paper,
which lies against the inner side of brass rim, M, and held in place by
the clamp, N. The electric sparks above spoken of pierce the strip of
paper with small holes and colored marks. These holes, etc, show the
exact limits to which the pointer has traveled under pressure, and thus
an indelible record is kept by the electrical indications shown upon the
strip of paper. The paper can have the pressures corresponding to gauge
printed upon the same, when the holes are made prominent by holding the
paper to the light, exposing an exact indication of the pressures or
explosives operated with.

The gases resulting from the explosives are injurious to the gauge
packings, etc., on which account the bore in gun, W, and the connecting
steel plug, B, are filled with fluid. A screw plug, U, enables the
insertion of the fluid, after first pushing an elastic wad of rubber, B,
or cork, in the bore near the inner wall of the gun, which wad will
prevent the escape of the fluid to the interior, and be sufficiently free
to prevent any interference with the pressures. The patentee and
manufacturer of this gauge is prepared to fill orders up to 50,000 lb.
per square inch. This gauge is made of the best steel, and is very
compact, the weight being inside of twenty-five pounds.

The inventor has heretofore made mercury column gauges for gunpowder
pressures, which were too large for direct attachment to guns, but were
connected with special powder chambers to test the pressure, etc., of
confined explosives. The experience thus gained enabled the construction
of the instrument here shown, which is adapted to direct attachment to
the gun, making it as easy now to measure gunpowder pressures as it had
been, heretofore, to measure steam pressures. The effect of this movement
is to reduce the exaggerated statement of high pressures, obtained from
ordinary sporting powders; these have been accredited with pressures up
to 40,000 lb. per square inch, but they only really gave 22,000 lb. by
actual gauge measurement. Artillerists and ordnance officers have, in
this instrument, a true pulse of the internal pressures of the gun, of
inestimable value when determining the quantity of powder and the proper
weight of shot. These are important matters in ordnance practice.

This gauge is a compact machine, designed to measure and indicate the
quick pressures resulting from gunpowder explosives and the slow
pressures of hydraulic force; the same mechanism used in both cases
permits the ready testing and examination of gauge under hydraulic
pressure, to determine its accuracy, for the more sudden pressure
occasioned by the use of gunpowder.

       *       *       *       *       *




IMPROVED PLAITING MACHINE.


The principal object the inventors of the machine we illustrate herewith
had in view in designing it was to arrange a mode of working the grip
motion positively, so that the cloth shall be received freely and without
strain or friction before or up to the very instant at which each fold is
completed, and shall then be seized and firmly held. In existing machines
there is not we believe, any arrangement for the accomplishment of this
purpose; it is true, the table upon which the cloth is folded is relieved
at the termination of the stroke of the plaiting knife, but the upper
gripper bar, against which the folds of cloth are pressed upon the return
of the table to its normal position, is stationary, being rigidly fixed
to the sides of the machine. One result of this rigidity is that the
cloth has to be forcibly thrust by the plaiting knife under the upper
gripper bar, and in consequence of the violence involved the fold just
made at the opposite end is dragged out from the grip, making a short
fold, and further, in the case of delicate finishes, giving rise to
damaged goods. Another result of this arrangement, when the cloth is not
pressed against the upper bar, is that it returns with the return stroke
of the plaiting knife, the grip not being made until the knife is clear
of the upper bar; thus the plaits or folds are made of irregular length.

[Illustration: IMPROVED PLAITING MACHINE.]

To remedy this and to prevent its occurrence, Messrs. A. Edmeston and
Sons, Manchester, in the plaiting machines they are now manufacturing
make the upper gripper bar movable as well as the table below. Referring
to the illustration, the upper gripper bars, A A, are capable of moving
about the center pins, B B, and when the machine is working are operated
in the following manner:

Upon the shaft, C, which revolves in unison with the crank shaft working
the plaiting levers and knife, are placed two cams, D, one at each end,
inside the main frames. These cams engage with and work two escapement
levers or pallets, E E, upon which rest the feet of four rods, attached
one end to each of the upper gripper bars. Upon these four rods are
helical springs of sufficient strength to hold down, by means of the
grippers to which they are connected, the folds of cloth that have just
been made. The cam, D, is so shaped that when the advancing plaiting
knife and cloth reach the front edge of the gripper bar, the gripper is
raised from the table to admit them freely. The instant the end of the
stroke is reached the anchor pallet or lever, E, escapes from the cam,
and the gripper bar is suddenly forced on to the knife and cloth by the
springs before mentioned, securely retaining the piece in its position.
Simultaneously with the first of these motions the plaiting table itself
is lowered, and, when the plaiting knife reaches the end of its stroke,
is released by means of the levers and chains, F F, which are in
connection with the escapement pallets, E, and partake of their every
motion. These chains are so attached that they exert no effort upon the
table until the escapement lever is moved, thus permitting the plaiting
table to press upward against either one or both of the gripper bars with
the full force imparted to it by the weights and levers, G¹ G¹. The
chains, furthermore, are also threaded over pulleys in such a manner that
they adjust themselves automatically to every position of the table and
to the different thicknesses which the folded cloth acquires.

It will be obvious from this description that in plaiting there is no
more strain put upon the cloth in placing it under the grip than is
necessary to draw it over the table from the feed rollers. This feature
insures perfect immunity from the dragging out of grip, as already
described, and renders the machine very useful for finishers and
makers-up, as the delicacy with which the cloth is handled prevents any
damage being done to the finish of the lightest fabrics. Double cloth
can, of course, be plaited by it equally well, and the precision and
uniformity with which the cloth is plaited makes the machine thoroughly
reliable as a cloth measurer.--_Tex. Manfr._

       *       *       *       *       *




SELF-ACTING SHUTTLE GUARD.


[Illustration: SELF-ACTING SHUTTLE GUARD.]

The annexed illustration shows the essential parts of Hahlo and
Liebreich's improvement, the loom being now at work. The handrail,
shuttle race, and starting handle can be at once recognized, and the
shuttle guard will be seen in its proper position, which position it
rigidly retains as long as the loom is working, but on a stoppage the rod
swings back close underneath the handrail, and quite clear of the reed.
The mode in which this is accomplished we will endeavor to make clear.
The guard is connected to the starting lever by the arrangement shown,
consisting of a stud on the handle, on which, with the movement of the
slay, lever, a, slides. This lever, by means of another lever and a link,
is attached to the shuttle guard by the crank, b, which, by means of the
set screw in the boss, permits the shuttle guard to be adjusted in the
most convenient place. It will be observed that whenever the loom stops
working, whether it is stopped by hand or automatically, the hand lever
has to be moved, and this movement is communicated to the shuttle guard
by the mechanism just described, placing the guard rod beneath the hand
rail, and leaving the whole of the shuttle race free and unencumbered.
The act of starting the loom brings the guard again to the working
position without any extra act having to be performed by the weaver. The
action is entirely automatic, and the weaver has not anything to do that
she has not to do with the present unguarded looms. The arrangement
appeared to ourselves to be a very efficient one, and it has the merit
that the length of the guard can be made greater than the width of the
cloth, a further advantage that will be recognized by practical weavers.

       *       *       *       *       *




RULER AND TRIANGLE FOR HATCHING.


The instrument shown in the cut is the invention of Mr. Maginnis, and is
designed for producing equidistant hatchings. It consists of a short
ruler, A, and a triangle, B, supposed to be one of 45°, but which may be
of any angle. The triangle carries two stops, c c, while the ruler is
provided with a conical piece, D, which is slotted, and is held by a
screw. The play that occurs between this conical slide and the stops
varies according to the position of the former.

[Illustration: RULER AND TRIANGLE FOR HATCHING.]

The apparatus operates as follows: In the figure, the stop to the right
being in contact with the piece, D, a line is drawn along the right side
of the triangle. Then the ruler is made to slide along the triangle until
D touches the other stop, and then the triangle is slid along the ruler
until the stop to the right touches D again. In this position another
line is drawn, and so on. The position of the piece, D, between the stops
is regulated according to the fineness of the hatching to be
done.--_Chronique Industrielle_.

       *       *       *       *       *




THE DISTILLATION OF SEA WATER.


The supplying of the troops at Suakim and in the Soudan with water is one
of the most important items in the whole conduct of the Egyptian war.
Even in cold or temperate latitudes fresh water is a first necessity for
animal life; much more is this the case in the desert; and the wells in
the country forming the scene of our military operations form in
themselves valuable strategical points. Their supply, however, has to be
supplemented, and to do so artificial means and the aid of the engineer
have to be enlisted into this service.

Many of our readers see notices from time to time in the newspapers about
this or that ship being employed, or at least her steam fittings, in
distilling water for the use of the troops; and although most of, if not
all, our readers are engineers, still it is no disparagement to some of
them to assume that they are more or less unfamiliar with sea water
distillation on the scale on which the process is now being carried on at
Suakim; and as the subject is of general interest, we give a short
description of the process.

In a general sense, fresh water is obtained from sea water by simply
generating steam from the sea water, passing the said steam through a
surface condenser, and filtering the resulting water. The obtaining of
fresh water in this way has been in practice on board sea-going ships for
many years. It is supposed by some authorities on this subject that the
first time fresh water was thus obtained at sea was by an old captain of
a brig which ran short of water, and he cut up some pewter dishes into
strips, which he bent and soldered into a pipe. He, with the carpenter's
aid, fitted a wooden lid in one of the cooking boilers, and fixed one end
of his pipe in it. He next sawed a water cask in half, bored a hole in
the bottom of one half, and took his pipe through it, filling the space
round the pipe with sea water. Thus he extemporized a worm and still or
condenser. The distilled water, however, was scarcely drinkable. Not to
be beaten, however, the captain got some pieces of charred wood which he
put in the water, which so far improved it as to render it at all events
fit to sustain life, and our skipper brought his brig and her screw
safely to port. What suggested the use of charcoal to his mind history
does not tell. For many years past scarce any sea-going vessel leaves
port that is not fitted with a properly constructed distiller; and one
conspicuous advantage attending this practice is that each ship thus
fitted to the satisfaction of the Board of Trade inspector is allowed to
sail with only half the quantity of fresh water on board which she should
have if not provided with a distiller. The distiller and filter occupy
very much less space than that which would be occupied by the casks or
tanks of water otherwise required to be carried.

Coming now a little to detail, sea water distillers are usually fitted in
connection with the winch and its boiler, which latter supplies the steam
both for distillation and to drive the engine working its circulating
pump. Smaller distillers are worked without a pump, the cooling water
merely passing through by gravitation. These smaller affairs again are of
two kinds, the one being mounted at one end of the cooking hearth, as in
outline sketch, which shows a two oven hearth with distiller at one end.
A is the supply pipe to admit air to aerate the water; B is the cock
where fresh water is drawn off; C is a pipe conveying cooling water to
the condenser E, placed on three little feet on top of the boiler, F,
whose steam rises up a central pipe to the dome top, where it expands out
and returns downward through a number of tubes about 1 in. diameter, in
which it is condensed, collected in a bottom chamber, and drawn off
through the cock, B. A distiller of this size would make about thirty
gallons of fresh water per day. Very frequently a distiller, such as is
shown in the sketch, is mounted separately, and placed near the winch or
donkey boiler, which supplies it with steam, the lower part, F, being
then used as a filter. The diameter of E is from 15 in. to 18 in., the
outer casing being either iron or copper. Another form of distiller is
one like the above, but larger, and having a small donkey engine and
circulating pump attached thereto. As a rule these distillers are
vertical, but larger apparatus are arranged horizontally. To give our
readers some general idea of size, weight, and produce of water, we may
say that a plain cylindrical distiller, mounted on a square filter case,
measuring 3 ft. 9 in. high, weighing 4½ cwt., will distill twelve gallons
per hour. A larger size, measuring 6 ft. 2 in. high, and weighing about
23 cwt., will give 85 gallons; while a still larger one, measuring 7 ft.
high and weighing 32 cwt., yields 150 gallons. These have no pumps. When
an engine and pump are fitted, the weight is increased from about 80 per
cent. in the smaller to 50 per cent. in the larger sizes. An immense
advantage attends the use of those distillers that are combined with a
winch boiler. Of course, the chief use of the winch is while in dock;
some use is made of it at sea to do heavy pulling and hauling, to wash
decks, and in case of emergency the circulating pump is used as a fire
engine. Were it not, however, for the distiller, the winch boiler would
simply be idle lumber at sea. The distiller, however, finds useful
employment for it, and has also this excellent effect, that as steam is
pretty constantly kept up for the distiller, in the evil event of a fire
the boiler is ready to work at once. In horizontal types of distiller an
engine and pump are mounted on a cast iron casing as a bed, and in this
casing is placed a number of tubes through which the steam passes to be
condensed, the whole being simply a surface condenser with engine and
pump above. Another type is that of a small single-flued horizontal
boiler with combustion chamber and twenty or thirty return tubes--in
fact, the present high-pressure marine boiler on a small scale. A boiler
of this sort, measuring 4 ft. to 5 ft. long, 3 ft. 9 in. to 4 ft. 6 in.
diameter, would have a horizontal donkey engine on a bed at its side, and
at the end of the engine a vertical cylindrical condenser.

[Illustration]

Few have done more, perhaps none so much, as Dr. Normandy to make sea
water distillation not only a success as a source of water supply, but
also to supply it at a minimum cost for fuel. He by a peculiar
arrangement of pipes embodied something of the regenerative system in his
apparatus, using the heat taken from one lot of steam to generate more,
and again the heat from this he used over again. The defect of his older
arrangements was undue complexity and consequent trouble to keep in
order.

As can be well imagined, the distillers in use at Suakim are on a much
more colossal scale, and owing to the now almost universal use of surface
condensers in ocean steamers, no great difficulty ought to attend the
adaptation of the boilers and condensers of one of our transports. One of
these full-powered steamers will indicate, say, 5,000 horse-power, and
assuming her engines to use 25 lb. of steam per indicated horse-power, or
2¼ gallons, she could distill some 12,000 gallons of water per hour. As
no appreciable pressure of steam need be maintained, the boilers would
suffer little from deposit, especially if regularly blown out. Hard
firing need not be resorted to; indeed, it would be injudicious, as, of
course, priming must be carefully guarded against. Of course, the salt
water distilled will affect the working, not exactly of the distillers,
but of the boilers. If the water in the harbor, as is not improbable, is
muddy, some method of filtering it before pumping it into the boilers
ought, if at all practicable, to be resorted to, for the twofold reason
of preserving the boiler plates from muddy deposit, and also to prevent
priming, which would certainly ensue from the use of muddy water. No
doubt the medical staff take care that the distilled water is alike
thoroughly aerated and efficiently filtered. The most successful method
of aerating is, we believe, to cause the current of steam as it enters
the condenser to suck in air by induced current along with it. The
filtering ought not to present any difficulty, as at all events sand
enough can be had. Charcoal, however, is another affair, and all
distilled water ought to be brought into contact with this substance.

Simple, however, as such an arrangement as this appears to be, practical
difficulties, which it is _said_ are insurmountable, stand in the way of
its adoption, and the distilled water produced for Egypt is made in
special apparatus, and various forms of condenser are employed, made
under various patents. The principle involved is, however, in all cases
the same. Steam is generated in one of the ships' boilers, and condensed,
filtered, and aerated in a special apparatus. The great objection to the
use of the ordinary surface condenser is that the main engines would, in
the majority of cases, have to be kept going, in order to pump the
distilled water out of the condenser, and to supply circulating water.
But it is easy to see that if engineers thought proper, this difficulty
could be readily got over. Separate circulating pumps, usually
centrifugal, are now freely used, and the addition of a special pump for
lifting the condensed water presents no difficulty whatever. While the
main engines are running, the withdrawal of much condensed water would
no doubt risk the safety of the boiler; but in the case of so-called
"distilling" ships, there need be no trouble incurred on this
score.--_The Engineer_.

       *       *       *       *       *




AIDS TO CORRECT EXPOSURE ON PHOTOGRAPHIC PLATES.

[Footnote: We take from the Br. Jour. of Photo. the following interesting
paper read by W. Goodwin before the Glasgow and West of Scotland Amateur
Association.]


With good plates, and intelligent development, a practiced photographer
may within certain limits correct the effects of an over or under
exposure; but you have all, doubtless, found out that there is a correct
exposure, and that you cannot trespass very far on either side of it
without sacrificing something in the resulting negative.

         MR. W.K. BURTON'S TABLE OF COMPARATIVE EXPOSURES
------------+--------------------+-------------------+-------------------------
            |                    |      Badly lighted|      Portraits in bright
            |                    |         interiors,|      diffused light
Aperture    |                    +------------+  up  |      out of doors.
calculated  |     Landscape with |     Fairly |  to  |     /
on the      |   heavy foliage in |    lighted |      |    /      Portraits in
standard    |        foreground. |  interiors |      |   /       studio light
system      +------+-------+     +------+     |      |   |      /
of the      | Sea  |Open   |     | Under|     |      |   |     /   Portraits
Photographic| and  |land-  |     |trees,|     |      |   |     |   in ordinary
Society.    | sky. | scape.|     |up to |     |      |   |     |   room.
------------+------+-------+-----+------+-----+------+------+-----+------
            |  sec |  sec  | sec | m  s | m  s| h  m |  sec | m  s| m  s
No. 1,      | 1/160|  1/50 | 1/8 | 0 10 | 0 10| 0  2 |  1/6 | 0  1| 0  4
or f/4      |      |       |     |      |     |      |      |     |
------------+------+-------+-----+------+-----+------+------+-----+------
No. 2,      | 1/80 |  1/25 | 1/4 | 0 20 | 0 20| 0  4 |  1/3 | 0  2| 0  8
or f/5.657  |      |       |     |      |     |      |      |     |
------------+------+-------+-----+------+-----+------+------+-----+------
No. 4,      | 1/40 |  1/12 | 1/2 | 0 40 | 0 40| 0  8 |  2/3 | 0  4| 0 16
or f/8      |      |       |     |      |     |      |      |     |
------------+------+-------+-----+------+-----+------+------+-----+------
No. 8,      | 1/20 |  1/6  |  1  | 1 20 | 1 20| 0 16 | 1-1/3| 0  8| 0 32
or f/11.314 |      |       |     |      |     |      |      |     |
------------+------+-------+-----+------+-----+------+------+-----+------
No. 16,     | 1/10 |  1/3  |  2  | 2 40 | 2 40| 0 32 | 2-2/3| 0 16| 1  4
or f/16     |      |       |     |      |     |      |      |     |
------------+------+-------+-----+------+-----+------+------+-----+------
No. 32,     | 1/5  |  2/3  |  4  | 5 20 | 5 20| 1  4 | 5-1/3| 0 32| 2  8
or f/22.627 |      |       |     |      |     |      |      |     |
------------+------+-------+-----+------+-----+------+------+-----+------
No. 64,     | 2/5  | 1-1/3 |  8  |10 40 |10 40| 2  8 |10-1/2| 1  4| 4 15
or f/32     |      |       |     |      |     |      |      |     |
------------+------+-------+-----+------+-----+------+------+-----+------
No. 128,    | 4/5  | 2-2/3 | 16  |21  0 |21  0| 4 15 |  21  | 2  8| 8 30
or f/45.255 |      |       |     |      |     |      |      |     |
------------+------+-------+-----+------+-----+------+------+-----+------
No. 256,    |1-1/2 | 5-1/2 | 32  |42  0 |42  0| 8 30 |  42  | 4 15|17  0
or f/64     |      |       |     |      |     |      |      |     |
------------+------+-------+-----+------+-----+------+------+-----+------

The estimation of this correct exposure is probably the greatest
difficulty in photography, and it is particularly discouraging to find
plate after plate useless because the guess has been wide of the mark.
There are some here to-night who have spoiled so many plates that at last
they are prepared by experience for almost any contingency, and to those
I nave very little to say; but there are also many who are still in their
troubles, and I propose to tell them how the amount of guesswork required
may be reduced to a minimum.

The factors which govern exposure are: the subject of the picture, the
lens and its aperture, the rapidity of the plate, and last, but not by
any means least, the quality of the light by which the work is to be
done.

Let us consider each of these separately, and see if we cannot reduce any
of them to rule. In this respect the subject will be found somewhat
intractable. Scarcely two subjects will be found to send exactly the same
amount of light through the lens. However, a broad classification may be
made, and this has been done by Mr. Burton in his Table of Comparative
Exposures. A glance at this table will show how greatly the character of
the view may influence the time of exposure. Thus, with full aperture of
a rapid symmetrical, the exposure for open landscape is given as
one-twelfth of a second; when heavy foliage appears in the foreground,
half a second will be required; while, under trees, as much as forty
seconds may be needed.

The first aid I have to suggest is the use of such a table as Mr.
Burton's. Before we do anything more in this direction, we must consider
the influence of the lens and its diaphragms. In theory the single
landscape lens is more rapid than the doublet of equal aperture, but the
difference is so little that it may be disregarded in practice, and my
remarks will apply to both.

The rapidity of a lens depends mainly on its aperture and its focal
length. Thus a lens of twelve inches focus will require four times the
exposure of a six inch, with an equal sized diaphragm, and a quarter inch
diaphragm will require four times the exposure of a half inch when used
in the same lens.

The Photographic Society of Great Britain have recommended that the
diaphragms of all lenses should bear such relation to the focal length
that each should require exactly double the exposure of the next smaller.
Now, if we turn again to Mr. Burton's table, we shall find that it is
constructed on this principle, and that each stop is numbered so as to
show its exposure. Obviously, the most sensible thing would be to get a
set of stops made to correspond with this arrangement, but we will see
how we can construct a table for stops of any size.

First, if possible, find the equivalent focus of your lens. If it is made
by a known maker, you will find it in his price list, and if not, you may
calculate it for yourself by the rules given in the various text books,
provided you have a camera of pretty long focus. However, it will be near
enough for our purpose if you get a sharp image of the sun on a piece of
paper, and while you hold lens and paper, get some one to measure the
distance from the paper to the diaphragm aperture, or, in the case of a
single lens, to the center of the lens. Note down this focal length, and
proceed to measure your diaphragms in sixteenths of an inch.

Then, with pen and paper, proceed to divide the diameter of each stop
into the focus, and state the result as a fraction of the focus, thus
f/8. For example, a Ross half plate rapid symmetrical has a focal length
of 7½ in.; for convenience reduce this to sixteenths=120. A diaphragm
measuring seven sixteenths will give the fraction f/17. Now let us see if
any of these stops correspond with Mr. Burton's. The first two in his
table will only be found in portrait lenses, but we shall probably find
one to correspond with the third, if we are using a doublet lens; with a
single lens we won't find any so large. Having picked out those that
correspond, and filled in the exposure for them, we have now to deal with
the odd sizes. Here is one, f/27, which is just half way between No. 16
and No. 32, but a moment's thought will show that as the exposure
increases as the square of the diameter, it won't do to take the exposure
half way between the two.

We have another factor to consider now: that is, the rapidity of the
plate. If you use plates by a maker who has a name to sustain, you may be
pretty confident that they are of fairly uniform rapidity, so after you
have got into the way of working any particular brand, the best thing you
can do is to stick to it. The exposures in our table are for plates of
medium rapidity in good spring light. In my own experience I find that
they just suit "thirty times" plates, or fifteen on the sensitometer; but
then I like a full exposure with slow development, and I know that others
find these exposures just right for "twenty times" plates developed in
the usual way. The most rapid plates in the market will not be overdone
with half the given exposures. It must always be borne in mind that an
error of a fraction of a second in either direction may be corrected in
development, and it is impossible to make a very serious error if you
refer to the table.

We come now to the light. If you depend on the eye entirely in judging
the quality of the light, it will sometimes play you tricks. The rays
which are most active on the plates are those which have the least effect
on the eye. We can, however, by chemical means arrive at an exact
estimate of the active power, and for this purpose an actinometer is
used. This is simply an arrangement whereby a piece of sensitized paper
is exposed and allowed to darken to a standard tint, and by the time it
takes to reach that tint the value of the light is judged. Capt. Abney
has, however, pointed out that ordinary sensitized paper is not suitable
for bromide plates, since there are conditions of light in which the
plates will be fairly rapid while the paper will be very slow. He gives a
formula for a bromide paper, which is treated with tannin in order to
absorb the bromine set free during exposure, otherwise the darkening
would be very slight. I used this paper for a while, but found it rather
slow. The tannin also turned brown on keeping for a week or so. I then
made some more, substituting for tannin potassium _nitrite_ (not
nitrate), which is colorless. This was an improvement, but still it was
just slow enough.

However, noticing in Capt. Abney's article the statement that the bromide
of silver should be as nearly as possible in the same state in the paper
as in the plate, I thought "Why not Morgan's paper?" This, of course, is
just bromide emulsion on paper, and if, as I suspect from its color, it
contains a trace of iodide, why, so do most commercial plates. A sheet of
this paper cut into strips, soaked for ten minutes in a fifteen-grain
solution of potassium nitrite, and dried, gives a sensitive paper which
darkens with great rapidity to a good deep tint, and keeps indefinitely.
Here is some prepared last summer, which is still quite good. To use this
paper make a little box so that a little roll of it can be stored in one
end, and drawn forward as required beneath a piece of glass.

Bearing in mind that your table of exposures is calculated for the best
spring light, go to the country some bright day next month with
note-book, actinometer, and the necessary appliances for exposing a few
plates. Select, say, an open landscape, and use your smallest stop. When
all ready to expose, get out your actinometer and expose it to the
reflected light of the sky for ten seconds (if the sun is shining, turn
your back to it, and keep the actinometer in your own shadow); then put
it in your pocket, expose a plate according to your table, and in case
the light or plate should not be just in accordance with the conditions
under which the table was prepared, expose other two plates, one a little
less and one a little more than that first exposed. Then note down
everything you have done--kind of view, stop, speed of plate, exposure of
each plate, and length of exposure of actinometer.

When you get home, the first thing to do is to get hold of a paint box
and paint the underside of the glass of your actinometer to match the
darkened paper. Do this by gas light. Then scrape away a little of the
paint, so as to let a strip of the paper be seen below it. After this
develop your three plates with a developer of normal strength, and see
which is best. If you have chosen a really bright spring day, and are
using plates of medium rapidity, you will most likely find that exposed
according to the table just about right.

Now let us see how we can use these aids in our field work. We have
ascertained the correct exposure with a given stop on one class of view,
with light of a given quality, but now suppose all these conditions
altered. Let the view have heavy foliage coming close up to the camera,
the stop be a size larger than that used in our first experiment, and the
day rather dull. The table tells us what the exposure would be with this
stop on this view, on a bright day; and if the actinometer take twenty
seconds to reach the painted tint, then we must double the exposure given
in the table.

You may sometimes find that the actinometer indicates a very different
exposure from what the eye would lead you to expect. For instance, one
day last September I went to Bothwell Castle, to get a picture I knew of
in the grounds. It was one of those strange yellow days we had then, and
the sun, though shining with all his might, was apparently shining
through orange glass. The actinometer indicated an exposure of thirty
seconds where in good light one would be right. I was rather incredulous.
Thirty seconds in broad sunshine! However, I gave this exposure, but for
my own satisfaction I gave another plate fifteen seconds only.

On developing, the latter was hopelessly underexposed while that having
thirty seconds gave a negative which furnished one of my exhibition
pictures.

I have shown you how to reduce the quality of the light to a certainty,
also how to reduce to rule the exposure with different lenses and stops
on certain classes of subjects, and it remains with you only to guess
correctly to what class the view you wish to take belongs; I can assure
you from my own experience that there is enough uncertainty about that
point to prevent good negatives ever becoming monotonous.

The only aid I can suggest in this case is the continual use of a
note-book. Note every plate you expose, and when you have a failure be
careful to record the fact, and you will gradually find these accumulated
notes becoming a great help in cases of doubt. One hint I can give to
beginners is that a great number of the pictures to be met with in this
part of the country are intermediate between "Open Landscape" and
"Landscape with heavy foliage in foreground;" and it is scarcely needful
to say that if you are in doubt, let the exposure be rather too much than
too little; you _may_ make a negative of an overexposed plate, but never
of an underexposed one.

       *       *       *       *       *




ISOCHROMATIC PHOTOGRAPHY.

[Footnote: Read at the stated meeting of the Franklin Institute, March
18, 1885.]

By FRED. E. IVES.


It is well known that the ordinary photographic processes do not
reproduce colors in the true proportion of their brightness. Violet and
blue photograph too light; green, yellow, orange and red, too dark. For a
long time it was believed to be impossible to remedy this defect; and
even when it became known that bromide of silver could be made more
sensitive to yellow and red by staining it with certain dyes, the subject
received very little attention, because it was also known that the
increase of sensitiveness was too slight to be of practical value in
commercial photography.

Dr. H.W. Vogel, who was one of the first, though not the first, to devote
attention to this subject, announced, in 1873, that he had succeeded in
making a yellow object photograph lighter than a blue or violet one, by
using a silver-bromide plate stained with coraline, and exposed through a
yellow glass. The plate showed no increased sensitiveness to red, and the
experiment, although of considerable scientific interest, did not
indicate a practically useful process.

In the spring of 1878 I became interested in this subject, and tried to
discover a method of producing plates which should be sensitive to all
colors, and capable of reproducing them in the true proportion of their
brightness. I commenced by trying nearly all the color sensitizers which
had already been suggested, in order to learn which was the best, and
then, if possible, _why_ it was the best, as a guide to further research.
Chlorophyl was the only thing I tried which was sufficiently sensitive to
red to offer any encouragement in that direction; but the solution which
I obtained was weak and unstable, and far from being a satisfactory color
sensitizer. Hoping to obtain a better solution with which to continue my
experiments, I made extracts from many kinds of leaves, and found that a
solution from blue myrtle leaves looked better and kept better than any
other, and when it was applied to the silver-bromide plates they became
remarkably sensitive, not only to all shades of red, but also to orange,
yellow, and green. By placing in front of the lens a color-screen
consisting of a small glass tank containing a weak solution of bichromate
of potash, to cut off part of the blue and violet light, I obtained, with
these chlorophyl plates, the first photographs in which all colors were
reproduced in the true proportions of their brightness. But my chief
desire at that time was to realize a method of producing from any object
in colors a set of three negatives, in one of which the shadows should
represent the blue of the original, in another the yellow, and in another
the red, in such a manner that transparent pigment prints from these
negatives--blue, yellow, and red--would, when superimposed on a white
surface, represent not only the lights and shadows, but also the colors
of the object. This had already been attempted by others, who failed
because their plates were not sufficiently sensitive to red and yellow.

Having succeeded perfectly in my undertakings, I published my discovery
in 1879,[1] explaining how to prepare and use the chlorophyl plates, in
connection with the yellow screen, for the purpose of securing correct
photographs of colored objects.[2]

[Footnote 1: _Philadelphia Photographer_, December, 1879, p. 365.]

[Footnote 2: I intended this publication to be a very full and explicit
one, and it was sufficiently so to be perfectly understood by most who
saw it; but some may think I did not sufficiently emphasize the
importance of using the particular kind of chlorophyl which I mentioned.
In a brief communication to the editor of the _Photo. News_, in 1883, I
described some experiments with eosine as a color sensitizer, and then
called attention to the superiority of blue-myrtle chlorophyl for this
purpose, stating that I had not been able to secure such results with any
other kind of chlorophyl, and that a fresh solution from fresh leaves
must be used to secure the greatest possible degree of sensitiveness. See
_Photo. News_, Nov. 1883, p. 747.]

So far as I know, nobody tried the process. Nearly five years later Dr.
Vogel announced that, after eleven years of investigation, he had at last
realized a successful process of this character, and that this new
process of his was the "solution of a problem that had long been
encompassed with difficulty." This publication attracted a great deal of
attention, and gave me occasion to again call attention to my process,[3]
and point out that it was not only the first practical solution of this
problem, but the only truly isochromatic process ever discovered. Dr.
Vogel's new process was not only no better in any respect, but the plates
were insensitive to scarlet and ruby-red, and therefore would not
photograph all colors in the true proportion of their brightness.

[Footnote 3: _Photo. News_, London, September 5, 1884, p. 566, and _Year
Book of Photography_ for 1885, p. 111.]

My method consists in treating ordinary collodio-bromide emulsion plates
with blue myrtle chlorophyl solution, exposing them through the yellow
screen, and then developing them in the usual manner. The emulsion which
I have employed is made with an excess of nitrate of silver, which is
afterward neutralized by the addition of chloride of cobalt; it is known
as Newton's emulsion. I now prepare the chlorophyl from fresh blue myrtle
leaves, by cutting them up fine, covering with pure alcohol, and heating
moderately hot; the leaves are left in the solution, and some zinc powder
is added, which helps to keep the chlorophyl from spoiling. I have a
bottle of this solution which was prepared about six months ago, and now
appears to be as good as when first made.[4] A glass plate is flowed with
the emulsion, and as soon as it has set, the chlorophyl solution is
applied for a few seconds, after which the plate is washed in pure water
until smooth, when it is ready for exposure.

[Footnote 4: I originally recommended chlorophyl extracted from dried
leaves, because I had not yet learned how to preserve the solution for
more than a few weeks; and at some seasons it would be difficult, if not
impossible, to obtain fresh leaves. The tea organifier which I
recommended is also a color sensitizer, and when it is used in connection
with the chlorophyl from dried leaves the plates are as sensitive to red
as can be safely prepared and developed in the light of an ordinary
photographic "dark-room." Plates prepared with chlorophyl from fresh
leaves do not require treatment with the tea organifier to secure this
degree of sensitiveness. Recently I have used the tea organifier and some
other sensitizers, in connection with the solution from _fresh_
myrtle-leaves, and in this way have produced plates having such an
exalted color sensitiveness as to be unmanageable in ordinary "dark-room"
light. Possibly, such plates might be prepared and developed in total
darkness, by the aid of suitable mechanical contrivances, but I am not
sure that they would work clear even then, because they appear to be
sensitive to heat as well as to light.]

My color-screen consists of a small plate-glass tank, having a space of
3/16 of of an inch between the glass, filled with a solution of
bichromate of potash about one grain strong. I place the tank in front of
the lens, in contact with the lens-mount. The advantage of this tank and
solution is that it can be more easily obtained than yellow plate glass,
and the color can be adjusted to meet any requirement.

The plates require about three times as much exposure through the yellow
screen as without it, and may be developed with the ordinary alkaline
pyro-developer.

[Illustration: IVES' PROCESS OF ISOCHROMATIC PHOTOGRAPHY.]

In order to illustrate the value of this process, I made two photographs
of a highly-colored chromo-lithograph, representing a lady with a bright
scarlet hat and purple feather, a yellow-brown cape and a dark-blue
dress. One, by the ordinary process, represents the blue as lighter than
the yellow-brown, the bright scarlet hat as black, and the purple feather
as nearly white. The other, by the chlorophyl process, reproduces all
colors in nearly the true proportion of their brightness, but with a
slight exaggeration of contrast produced purposely by using a too-strong
color solution in the small tank.

I also made two landscape photographs, one by the ordinary process, and
the other by the chlorophyl process, exposing them simultaneously. In the
ordinary photograph, distant hills are lost through overexposure, yet the
foreground seems underexposed, and yellow straw-stacks and bright autumn
leaves appear black. In the chlorophyl photograph, the distant hills are
not overexposed, nor is the foreground underexposed; the yellow
straw-stacks appear nearly white, and bright autumn leaves contrast
strongly with the dark green about them.

To test the relative color-sensitiveness of plain emulsion plates, plates
stained with eosine, and plates stained with the blue-myrtle chlorophyl,
I exposed one of each kind through the same yellow screen, giving each
five minutes exposure, on the same piece of copy, which was the
chromo-lithograph already described. The plain emulsion plate showed only
the high lights of the picture, after prolonged development. The eosine
plate was underexposed, but brought up everything fairly well except the
scarlet hat, which came up like black. The chlorophyl plate was
overexposed, brought out all colors better than the eosine plate, and
gave full value to the bright scarlet of the hat, the detail in which was
beautifully rendered.

Dr. Vogel advanced the theory that silver-bromide is insensitive to
yellow and red, because it reflects or transmits those colors; and that
it becomes sensitive when stained, because of the optical properties of
the dyes. He afterward admitted that only such dyes as are capable of
entering into chemical combination with the silver-bromide proved capable
of increasing its sensitiveness to color, but he held to the theory that
the optical properties of the compound were the cause of its
color-sensitiveness.

I have shown that the color-sensitiveness can be produced by treatment
with an organic compound which has none of the optical properties
characteristic of dyes; and that chlorophyl, which absorbs only red
light, greatly increases the sensitiveness also to yellow and green.
There is, therefore, good reason to doubt if the color-sensitiveness is
ever due to the optical properties of the dye or combination.

Attempts have been made to produce isochromatic gelatine dry plates
which, while many times more sensitive to white light than my chlorophyl
plates, shall also show the same relative color-sensitiveness. Such
plates would be very valuable but for one fact: it would be necessary to
prepare and develop them in almost total darkness. Gelatine bromide dry
plates extremely sensitive to yellow, but _comparatively insensitive to
red_, might be used to advantage in portrait and instantaneous
photography, because they could be safely prepared and developed in red
light; but when truly isochromatic photographs are required, the time of
exposure must be regulated to suit the degree of sensitiveness to red,
which cannot safely be made greater than I have realized with my
chlorophyl process.

       *       *       *       *       *




DISTORTION FROM EXPANSION OF THE PAPER IN PHOTOGRAPHY.


The effect of the unequal expansion of paper, when wetted, in causing
distortion of the photographic image impressed upon it, has, in the case
of ordinary photographs upon albumenized paper, been well recognized; but
the extent to which such distortion may exist under different treatment
is worthy of some special consideration, particularly with reference to
the method of printing upon gelatinized paper, which has been thought by
some likely to supersede the method now usually employed with albumenized
paper.

When a print upon the ordinary photographic (albumen) paper is wetted,
the fiber expands more in one direction than in the other, so that the
print becomes unequally enlarged, very slightly in one and much more so
in the other way of the paper. When the paper is dried without any strain
being put upon it, the fibers regain very nearly their original
dimensions and position, so that the distortion which has existed in the
wet condition nearly disappears.

If the photograph is cemented, while in the expanded condition, upon a
rigid surface, the distortion then existing is fixed, and rendered
permanent. Such a cementation or method of mounting is that which has
been generally adopted, and the consequence has been that every now and
then complaints have justly been made of the untruthfulness--owing to
this particular distortion--of photographs; productions whose chief merit
has often been asserted to consist in their absolute truthfulness. This
distortion is very manifest when, in a set of portraits, some of the
prints happen to have been made in one direction of the paper, and others
with the long grain the other way. I have known a case where a proof
happened to increase the face in width, and all the other prints
increased it in length. Of course, neither was correct, but the proof had
been accepted and liked, and the remainder of the set had to be reprinted
with the grain of the paper running in the same direction as that in the
first one which had been supplied.

Another evil arising from mounting prints while expanded with moisture
is, that in drying the contraction of the paper pulls round the card into
a curved form and although by rolling this curvature may be temporarily
got rid of, the fiber of the paper is in a strained condition, and the
bent state of the mount is, sooner or later, renewed thereby.

To remedy these evils it has been proposed to mount the print when dry,
by forcible pressure against a slightly damped card, the back of the
print having been previously coated with a cement and dried. This plan
is, to a great extent, successful; but that it does not give absolute
immunity from distortion is, I think, evident from the following
consideration. The prints, after being mounted a few days, will show a
certain tendency to curl inward. This curling, I take it, is a measure of
the strain upon the print, produced by the more complete return to its
original dimensions of the paper photograph. Probably it would be well to
keep the prints a few days after drying, or to subject them to
alternations of damp and dryness, in order to facilitate this complete
return before being placed upon the card. The evil of distortion is,
however, very slight--perhaps imperceptible--compared with that existing
when the prints are mounted wet. I may mention, _en passant_, that I have
found gum much more satisfactory as a mountant than starch paste in what
is known as the "dry mounting" system.

The paper which has recently been introduced for producing prints by
development upon a gelatine surface does not generally, when dried in the
usual way, give so good or so brilliant a surface as that of albumenized
paper; but on the other hand it is very easy with it to obtain what is
called an enamel surface, by simply allowing it to dry in contact with a
prepared surface of glass. This method of finishing has therefore been
much recommended and adopted, but without consideration of the effect of
distortion in connection with it. In an ordinary photograph the print is
mounted damp, but in the case of a print squeegeed on to the glass, the
paper is saturated and thoroughly swollen, and the use of the squeegee
strains it out to its fullest extent. By drying in the position in which
it has been held by contact with the glass, the distortion becomes fixed,
and if the print is mounted while in this state the distortion is made
permanent. How long the strain and distortion remain in an unmounted
print, and whether by time and alternations of moisture and dryness the
strain would be lost, and if so, whether the brilliant enamel surface
would go at the same time, are questions worthy of further investigation
and discussion.

For mounting prints upon developed gelatine paper, it has been
recommended to cement the edges only, so as to leave the greater part of
the print with its enamel surface. This plan is unsatisfactory, for two
reasons, besides the objection on the ground of distortion. There is a
rough-looking margin which spoils the continuity of appearance,
especially (as in the specimens I have seen) where the line of cement is
not kept at an exact width, but encroaches here and there.

Secondly, the print, from not being attached to the mount all over, is
apt, especially when in a large size, to be somewhat wavy and wanting in
flatness. Another plan recommended, as giving a surface resembling
albumen paper, is to paste the back of the print without moistening the
surface, and so mount. Some prints that have been shown thus treated had
so strongly curled the cards upon which they were mounted that it is
evident there was considerable strain and consequent distortion.

A third plan recommended is to paste the back of the print while in
contact with the glass upon which it has to dry; and, when dried, to
mount by passing through a rolling press with a damped card. This plan
looks, at first sight, like that recommended for albumen paper, and
called "dry" mounting. Consideration, however, will show that there is a
radical difference. In the case of the albumen paper the print has been
dried without strain, and therefore but little change is to be looked
for, while the print dried in contact with glass is strained to the
utmost, causing present distortion and future curling of the mount.
Perhaps the evil of distortion caused by enameling may be reduced to a
minimum by soaking the print in alcohol previous to laying it upon the
glass.

Since the distortion of the photograph arises from the unequal expansion
of the paper when wet, it becomes a question whether something may not be
done in the selection of the paper itself. It may be that some makes vary
much less than others in the "length against width" extension of the
surface by wetting. It must be remembered that for gelatine emulsion we
are not nearly so limited in the selection of paper as when it is
required to be albumenized. In the latter case the image is in the paper,
whereas with gelatine the image is contained in the surface coating. I
may mention that the best plain, i.e., not enameled, but resembling that
of ordinary albumen paper, surface that I have seen upon gelatine paper
was upon some foreign post that I had obtained for another purpose. The
emulsion employed was that described by Mr. J.B.B. Wellington, and this
gentleman agreed with me in attributing the superiority of the surface
obtained to the fine quality of the paper upon which the emulsion had
been coated. Some commercial samples appear to be coated upon paper of
somewhat coarse texture. This does not show when the print is enameled.

The unequal expansion of paper is a subject of interest, not only in
connection with gelatine paper for development, but with various
photographic processes. In making carbon transparencies for instance, the
gelatine film which is squeegeed against the glass necessarily takes its
dimensions from the paper to which it is attached, and if that be
expanded more in the one direction than another, the transparency is
similarly deformed; and so, of course, is any negative, enlarged or
otherwise, produced in the camera therefrom. A reproduced negative by
contact printing may either have the distortion due to expansion of the
paper bearing the gelatine film removed or doubled, according to the
direction in which the paper is used for the new negative.--_W.E.
Debenham, in Br. Jour. of Photography_.

       *       *       *       *       *




MEASURING THE THICKNESS OF BOILER PLATES.


An ingenious process for determining the thickness of iron plates in
boilers, or places where they cannot otherwise be measured without
cutting them, has been invented by M. Lebasteur. He spreads upon the
plate the thickness of which he desires to find, and also upon a piece of
sheet iron of known thickness, a layer of tallow about 0.01 inch thick.
He then applies to each, for the same length of time, a small object,
such as a surgeon's cauterizing instrument, heated as nearly as possible
to a constant temperature. The tallow melts, and as in the thicker plate
the heat of the cautery is conducted away more rapidly, while in the thin
plate the heat is less freely conducted away, and the tallow is
consequently melted over a large area, the diameters of the circles of
bare metal around the heated point, bounded after cooling by a little
ridge of tallow, will be to each other inversely as the thickness of the
plates. The process is stated to have given in the inventor's hands,
results of great accuracy.

       *       *       *       *       *




GROUPS OF STATUARY FOR THE PEDIMENT OF THE HOUSE OF PARLIAMENT IN
VIENNA.


The pediment of the central pavilion and the two side pavilions of the
new House of Parliament, at Vienna, are to be ornamented with groups of
statuary. The group in the middle pediment represents the granting of the
constitution by the Emperor Francis Joseph, and was executed by Professor
Helmer.

[Illustration: STATUARY FOR THE VIENNA HOUSE OF PARLIAMENT.--SCIENCE
AND LITERATURE. (GROUP TO THE LEFT.)]

The pediment of the left wing is ornamented by a group representing
Justice, and the pediment of the right wing by a group representing the
Home Government.

Johannes Benk, the well known Austrian sculptor, designed and executed
the last mentioned group. The two figures at the left hand end of this
group represent Science and Literature, and those at the right hand end,
Industry and Commerce. The entire group consists of nine figures, the
middle figure being seated and the rest standing, sitting, and lying, as
the space in the pediment allows.

A seated female figure studying a papyrus roll represents Science, and
the adjacent female figure, resting one arm on the figure representing
Science, and the other, on a lyre, represents Literature or Poetry.

Industry is represented by a strong and powerful woman holding a hammer,
and the figure of Mercury and the prow of a vessel represent Commerce.

[Illustration: STATUARY FOR THE VIENNA HOUSE OF PARLIAMENT.--INDUSTRY
AND COMMERCE. (GROUP TO THE RIGHT.)]

The modulation and formation of each figure conform strictly to Grecian
models, as does also the entire arrangement of the figures in the group;
and yet there is much of modern life in the figures, especially in the
faces, in which the stereotyped Grecian profile has not been adopted. The
attitudes of the figures are also freer and more easy than those of the
Grecian period.--_Illustrirte Zeitung_.

       *       *       *       *       *




ON THE FRITTS SELENIUM CELLS AND BATTERIES.

[Footnote: Paper read before the American Association for the Advancement
of Science, at Philadelphia, Sept, 5, 1884.]

By C.E. FRITTS, 42 Nassau St., New York, N.Y.


In all previous cells, so far as I am aware, the two portions or parts of
the selenium at which the current enters and leaves it have been in
substantially the same electrical state or condition. Furthermore, the
paths of the current and of the light have been transverse to each other,
so that the two forces partially neutralize each other in their action
upon the selenium. Lastly, the current flows through not only the surface
layer, which is acted upon by the light, but also the portion which is
underneath, and not affected thereby, and which therefore detracts from
the actual effect of the light upon the selenium at the surface.

My form of cell is a radical departure from all previous methods of
employing selenium, in all of these respects. In the first place, I form
the selenium in very thin plates, and polarize them, so that the
opposite faces have different electrical states or properties. This I do
by melting it upon a plate of metal with which it will form a chemical
combination, sufficient, at least, to cause the selenium to adhere and
make a good electrical connection with it. The other surface of the
selenium is not so united or combined, but is left in a free state, and a
conductor is subsequently applied over it by simple contact or pressure.

During the process of melting and crystallizing, the selenium is
compressed between the metal plate upon which it is melted and another
plate of steel or other substance with which it will not combine. Thus by
the simultaneous application and action of heat, pressure, chemical
affinity, and crystallization, it is formed into a sheet of granular
selenium, uniformly polarized throughout, and having its two surfaces in
opposite phases as regards its molecular arrangement. The non-adherent
plate being removed after the cell has become cool, I then cover that
surface with a _transparent conductor of electricity_, which may be a
thin film of gold leaf. Platinum, silver, or other suitable material may
also be employed. The whole surface of the selenium is therefore covered
with a good electrical conductor, yet is practically bare to the light,
which passes through the conductor to the selenium underneath.[5] My
standard size of cell has about two by two and a half inches of surface,
with a thickness of 1/1000 to 5/1000 inch of selenium. But the cells can,
of course, be made of any size or form. A great advantage of this
arrangement consists in the fact that it enables me to apply the current
and the light to the selenium in the same plane or general direction,
instead of transversely to each other as heretofore done, so that I can
cause the two influences to either coincide in direction and action, or
to act upon opposite faces of the selenium and oppose each other,
according to the effect desired.

[Footnote 5: The method of constructing the cells was described in the
SCIENTIFIC AMERICAN SUPPLEMENT, No. 462, for Nov. 8, 1884, page 7371.]

By virtue of the process and arrangement described, my cells have a
number of remarkable properties, among which are the following:

1. _Their sensitiveness to light_ is much greater than ever before known.
The most sensitive cell ever produced, previous to my investigations, was
one made by Dr. Werner Siemens, which was 14.8 times as conductive in
sunlight as in dark. In table A, I give results obtained from a number of
my cells.

It will be observed that I have produced one cell which was 337.5 times
as conductive in hazy sunlight as in dark. The tremendous change of
resistance involved in the expression "337.5 times" may perhaps be more
fully realized by saying that 99.704 _per cent_. of the resistance had
disappeared temporarily, under the joint action of light and electricity,
so that there remained _less than 3/10 of 1 per cent_. of the original
resistance of the selenium in dark.

In order to obtain these high results, the cells must be protected from
light when not in use. The resistance is first measured while the cell is
still in total darkness. It is then exposed to sunlight and again
measured. It is also necessary to send the current in at the gold
electrode or face, as the cell is much less sensitive to light when the
light acts upon one surface of the selenium and the current enters at the
opposite surface. When the two influences, the light and the current, act
through the gold, in conjunction, their forces are united; and, as every
atom of the selenium is affected by the light, owing to the extreme
thinness of the plate, we have the full effect shown in the measurements.

                          TABLE A.

                   SENSITIVENESS TO LIGHT.

-----------------------------------------------------------------
Selenium  |  Battery  | Resistance in | Resistance in |
  cell.   |  power.   |     dark.     |   sunlight.   |  Ratio.
----------+-----------+---------------+---------------+----------
          |           |    ohms.      |   ohms.       |
 No. 22   |5 elements.|    39,000     |    340        |114   to 1
  "  23[6]|5     "    |    14,000     |    170        | 82.3  " "
  "  24[7]|5     "    |   648,000     |  2,400        |270    " "
  "  25   |5     "    |   180,000     |    930        |196.5  " "
  "  26   |5     "    |   135,000     |    710        |190    " "
  " 107   |5     "    |   118,000     |    740        |159    " "
  " 108   |5     "    |   200,000     |    900        |222    " "
  " 122   |5     "    |    56,000     |    220        |254.5  " "
  " 129[6]|5     "    |   200,000     |    940        |212    " "
  " 137   |5     "    |   108,000     |    320        |337.5  " "
-----------------------------------------------------------------

[Footnote 6: Cells No. 23 and No. 129 are now in possession of Prof. W.
Gryllis Adams, of King's College, London; Dr. Werner Siemens has No. 25,
and Prof. George F. Barker, of Philadelphia, has No. 26.]

[Footnote 7: No. 24 was measured with a bridge multiplier of 6 to 1.]

Cells which are sensitive to light improve by being used daily, and their
sensitiveness becomes less if they are laid aside and not used for a
considerable length of time, especially if allowed to become overheated.
They should be kept cool, and exposed to light frequently, whether they
are used or not.

_Mode of measuring cells_.--So great is the sensitiveness of these cells
to external influences, that it is necessary to adopt some particular
system in measuring their resistance and to adhere strictly to that
system, as every change in the method of measurement produces a
difference in the result, and the different measurements would not be
comparable with each other. The reason for this will be explained
presently.

The system I have adopted is the Wheatstone's bridge arrangement, with
equal sides, never using multipliers except for some experimental
purpose. In each multiplier wire I have 500 ohms resistance. When the
bridge is balanced, one-half of the current flows through the cell and
acts upon the selenium. Between the bridge and the cell is a reversing
switch, so that the current can be reversed through the cell without
changing its course through the bridge. A Bradley tangent galvanometer is
used, employing the coil of 160 ohms resistance. The Leclanche battery is
exclusively used in measurements for comparison.

2. _The kind of battery employed_ has a marked effect upon the
sensitiveness to light, which is largely reduced or entirely destroyed
when the bichromate battery is used. The same cells again become
extremely sensitive with the Leclanche battery. We might expect that a
change in the current employed would cause a change in the _resistance_
of a cell, but it is not clear how or why it should affect the
_sensitiveness of selenium to light_.

"If one kind of battery current destroys its sensitiveness, may we not
suppose that another kind might increase its sensitiveness? Although the
Leclanche has operated well, some other may operate still better, and by
its special fitness for use on selenium cells may intensify their
actions, and so bring to light other properties yet unthought of. Is not
here a promising field for experiment, in testing the various forms of
battery already known, or even devising some new form especially adapted
to the needs and peculiarities of selenium cells?"

One year ago I made the foregoing suggestion in a paper on _A New Form of
Selenium Cell_, presented before this Association at Minneapolis. I am
now at liberty to state that my photo-electric battery, presently to be
described, marks an advance in the direction indicated. The current from
this battery increases the sensitiveness of the cells to light, and also
to reversal of current. One cell whose highest ratio in light was about
83 to 1, with the Leclanche battery, when measured with my battery gave a
ratio of 120 to 1. It seems to make the resistance of the cell both
higher in dark and lower in sunlight than with the Leclanche battery. But
the field is yet open to others, for the discovery of a battery which may
be still better for use with selenium cells.

3. _The two surfaces of the selenium act differently toward currents_
sent into them from the contiguous conductors. One surface offers a
higher resistance to the current than the other. The former I utilize as
the anode surface, as I have found that the cell is more sensitive to
light when the current enters at that surface, which is ordinarily the
one covered by the gold or other transparent conductor. Some cells have
this property but feebly developed; but in one instance the resistance
offered to the current by the anode surface was 256 times as high as that
offered by the cathode surface to the same current. In the majority of
cases, however, the ratio does not exceed ten times. Table B gives some
recent results.

                           TABLE B.

      SENSITIVENESS TO REVERSAL OF DIRECTION OF CURRENT.

-----------------------+--------------+------------------+---------
                       |              |   Resistance     |
    No. of cell.       |   Battery.   | "gold  | "gold   | Ratio
                       |              | anode."|cathode."|
-----------------------+--------------+--------+---------+---------
                       |              |  ohms. |  ohms.  |
3/8 inch square. No. 4 |  5 elements. | 20,000 |  1,000  | 20  to 1
      "     "     "  3 |   Se. cell.  |  6,500 |    400  | 16.2 "
   Full size, No. 13   |  1 element.  |  9,000 |    800  | 11.2 "
     "    "    "  14   |  5    "      |  2,440 |    130  | 18   "
     "    "    "  15   |  5    "      |  4,640 |    210  | 22   "
     "    "    "  27   |  5    "      |  6,900 |    440  | 16   "
     "    "    " 126   |  1    "      |  5,000 |    330  | 15   "
-----------------------+--------------+--------+---------+---------

The direction of the current is always indicated by stating the position
of the gold electrode, by the terms "gold anode" and "gold cathode." The
above measurements were made in dark.

4. _Sensitiveness to change of battery power_.--My cells are extremely
sensitive to any change in the strength or character of the current
flowing through them, which is shown by a corresponding change in the
resistance of the cell. I can, therefore, vary the resistance of one of
my cells in many ways, and the following may be specified--

(a) By changing the potential or electromotive force of the current
through the cell.

(b) By changing the "quantity" of the battery or current.

(c) By putting more or less resistance in the circuit.

(d) By dividing the current, by one or more branch circuits or shunts
around the cell.

(e) By varying the resistance in any or all of said circuits.

A cell whose resistance becomes greater as the battery power becomes
greater, and _vice versa_, I call an "L B cell" signifying _Like the
Battery power_. A "U B cell" is one whose resistance becomes greater as
the battery power (or strength of current) becomes less, and _vice
versa_, being _Unlike the Battery power_, or current strength.

These changes of resistance are not due to heating of the conductor or
the selenium, and the following instance will illustrate this. I have one
cell in which the selenium has about one-fourth inch square of surface
melted on a brass block one inch thick. This cell measured, with 25
elements of Leclanche, 40,000 ohms. On changing the battery to 5 elements
the resistance fell instantly to 30 ohms, and there remained. On again
using the current from 25 elements, the resistance instantly returned to
40,000 ohms. Had these results been due in any degree to heating, the
resistance would have changed gradually as the heat became communicated
to the brass, whereas no such change occurred, the resistances being
absolutely steady. Moreover, even the fusion of the selenium would not
produce any such change.

The "U B" property does not ordinarily change the resistance of the cell
to exceed ten times, i.e., the resistance with a weak current will not be
over ten times as high as with a strong one. But I have developed the "L
B" property to a far higher degree. Table C gives some recent results
obtained with L B cells, including one whose resistance, with 25 elements
Leclanche, was 11,381 times as high as with 8 elements, and which, after
standing steadily at 123 ohms (and then at 325 ohms with 1 element), on
receiving the current from 25 elements again returned to its previous
figure of 1,400,000 ohms.

                         TABLE C.

          SENSITIVENESS TO CHANGE OF BATTERY POWER.
-----------------------+------------+------------+-------------
                       | Resistance | Resistance |
       No. of cell.    |   with 25  |   with 5   |  Ratio of
                       |  elements. |  elements. |   Change.
-----------------------+------------+------------+-------------
                       |  ohms.     |  ohms.     |
3/8 inch square, No. 1 |    40,000  |     30     |  1,333 to 1
3/8  "     "      "  2 |    13,000  |     40     |    325  "
1/4  "     "      "  1 | 1,400,000  |    123[8]  | 11,381  "
1/2  "     "      "  2 |   500,000  |     62     |  8,064  "
1/2  "     "      "  5 |     3,500  |     21     |    167  "
   Full size, No. 81   |    68,000  |    121     |    561  "
    "    "     "  82   |     9,000  |     64     |    140  "
    "    "     "  83   |    17,300  |     74     |    233  "
    "    "     " 119   |    35,600  |     19     |  1,894  "
-----------------------+------------+------------+-------------

[Footnote 8: This measurement was obtained with 8 elements.]

The results in the table were obtained by changing the strength of
current by throwing in more or less of the battery. Like results can be
obtained by varying the current through the cell by any of the other
methods before specified. The above measurements were in dark.

5. _Dual state of selenium_.--My cells, when first made seem to have two
states or conditions. In one, their resistance is very low, in the other
it is high. When in the low state they are usually not very sensitive, in
any respect. I therefore raise the resistance, by sending an intermittent
or an alternating current though the cells, and in their new condition
they at once become extremely sensitive to light, currents, and other
influences. In some cases they drop to the low state again, and require
to be again brought up, until, after a number of such treatments, they
remain in the sensitive state. Occasionally a cell will persist in
remaining in the insensitive state. The before mentioned treatment raises
it up for a moment, but, before the bridge can be balanced and the
resistance measured, it again drops into the low or insensitive state.
Some cells have been thus stimulated into the high or sensitive state
repeatedly, and every means used to make them stay there, but without
avail; and they have had to be laid aside as intractable.

In the earlier stages of my investigations, before the discovery of this
dual state and the method of changing a cell from the insensitive to the
sensitive condition, hundreds of cells were made, finished, and tested,
only to be then ruthlessly destroyed and melted over, under the
impression that they were worthless. Now, I consider nothing worthless,
but expect sooner or later to make every cell useful for one purpose or
another.

The most singular part of this phenomenon is the wide difference in the
resistance of the cells in the two states. In the low state, it may be a
few ohms, or even a few hundredths of an ohm. In the high state, it is
the normal working resistance of the cell, usually between 5,000 and
200,000 ohms, but is often up among the millions. The spectacle of a
little selenium being stimulated, by a few interruptions of the current
through it, into changing its resistance from a fraction of an ohm up to
a million or several millions of ohms, and repeatedly and instantly
changing back and forth, up and down, through such a wide range, we might
almost say changing from zero to infinity, and the reverse, instantly, is
one which suggests some very far-reaching inquiries to the electrician
and the physicist. What is the nature of electrical conductivity or
resistance, and how is it so greatly and so suddenly changed?

6. _Radio-electric current generators_.--My cells can be so treated that
will generate a current by simple exposure to light or heat. The light,
for instance, passes through the gold and acts upon its junction with
the selenium, developing an electromotive force which results in a
current proceeding from the metal back, through the external circuit, to
the gold in front, thus forming a photo-electric dry pile or battery. It
should preferably be protected from overheating, by an alum water cell or
other well known means.

The current thus produced is radiant energy converted into electrical
energy directly and without chemical action, and flowing in the same
direction as the original radiant energy, which thus continues its
course, but through a new conducting medium suited to its present form.
This current is continuous, constant, and of considerable electromotive
force. A number of cells can be arranged in multiple arc or in series,
like any other battery. The current appears instantly when the light is
thrown upon the cell, and ceases instantly when the light is shut off. If
the light is varied properly, by any suitable means, a telephonic or
other corresponding current is produced, which can be utilized by any
suitable apparatus, thus requiring no battery but the selenium cell
itself. The strength of the current varies with the amount of light on
the cell, and with the extent of the surface which is lighted.

I produce current not only by exposure to sunlight, but also to dim
diffused daylight, to moonlight, and even to lamplight. I use this
current for actual working purposes, among others, for measuring the
resistance of other selenium cells, with the usual Wheatstone's bridge
arrangement, and for telephonic and similar purposes. Its use for
photometric purposes and in current regulators will be mentioned further
on. It is undoubtedly available for all uses for which other battery
currents are employed, and I regard it as the most constant, convenient,
lasting, readily used, and easily managed pile or battery of which I have
any knowledge. On the commercial scale, it could be produced very
cheaply, and its use is attended by no expense, inasmuch as no liquids or
chemicals are used, the whole cell being of solid metal with a glass in
front, for protection against moisture and dust. It can be transported or
carried around as easily and safely as an electro-magnet, and as easily
connected in a circuit for use wherever required. The current, if not
wanted immediately, can either be "stored" where produced, in storage
batteries of improved construction devised by me, or transmitted over
suitable conductors to a distance, and there used, or stored as usual
till required.

7. _Singing and speaking cells_.--When a current of electricity flowing
through one of my selenium cells is rapidly interrupted, a sound is given
out by the cell, and that sound is the tone having the same number of air
vibrations per second as the number of interruptions in the current. The
strength of the sound appears to be independent of the direction of the
current through the cell. It is produced on the face of the cell, no
sound being audible from the back of the cell. An alternating current
also produces a sound corresponding to the number of changes of
direction. Experiments also show that, if a telephonically undulating
current is passed through the cell, it will give out the speech or other
sound corresponding to the undulations of the current--and, furthermore,
that the cell will sing or speak in like manner, without the use of a
current, if a suitably varied light is thrown upon it while in closed
circuit.

My experiments having been devoted especially to those branches of the
subject which promised to be more immediately practically valuable, I
have not pursued this inquiry very far, and offer it for your
consideration as being not only interesting, but possibly worthy of full
investigation.

GENERAL OBSERVATIONS ON THE PROPERTIES OF CELLS.

From the number of different properties possessed by my cells, it might
be anticipated that the different combinations of those properties would
result in cells having every variety of action. This is found to be the
case. As a general rule, the cells are noteworthy in one respect only.
Thus, if a cell is extremely sensitive to light, it may not be specially
remarkable in other respects. As a matter of fact, however, the cells
most sensitive to the light are also "U B cells."

The property of sensitiveness to light is independent of the power to
generate current by exposure to light--the best current-generating cells
being only very moderately sensitive to light, and some of the most
sensitive cells generate scarcely any current at all. Current-generating
cells are, almost without exception, "U B cells;" and the best
current-generating cells are strongly polarized, showing a considerable
change of resistance by reversing the direction of a current through
them; and they are also strong "anode cells," i.e., the surface next to
the gold offers a higher resistance to a battery current than the other
surface of the selenium does. The power to generate a current is
temporarily weakened by sending a battery current through the cell while
exposed to light, in either direction. The current generated by exposure
to light is also weakened by warming the cell, unless the cell is
arranged for producing current by exposure to heat.

The properties of sensitiveness to light and to change of battery power
are independent of each other, as I have cells which are sensitive to
change of current but absolutely insensitive to light--their resistance
remaining exactly the same whether the cells are in darkness or in
sunlight. I also have cells which are sensitive to light, but are
unaffected by change of battery power, or by reversing the direction of
the current through them.

The sensitiveness to change of battery power is also independent of the
sensitiveness to reversal of direction of the current. Among the best "L
B cells," some are "anode cells" and others are "cathode cells," while
still others are absolutely insensitive to reversal of current or to the
action of light.

_Constancy of the resistance_.--A noticeable point in my cells is the
remarkable constancy of the resistance in sunlight. Allowing for
differences in the temperature, the currents, and the light, at different
times, the resistance of a cell in sunlight will remain practically
constant during months of use and experiments, although during that time
the treatments received may have varied the resistance in dark hundreds
of thousands of ohms--sometimes carrying it up, and at others carrying it
down again, perhaps scores of times, until it is "matured," or reaches
the condition in which its resistance becomes constant.

As has already been stated, the sensitiveness of a cell to light is
increased by proper usage. This increased sensitiveness is shown, not by
a lowered resistance in light, but by an increased resistance in dark.
This change in the cells goes on, more or less rapidly, according as it
is retarded or favored by the treatment it receives, until a maximum is
reached, after which the resistance remains practically constant in both
light and dark, and the cell is then "matured," or finished. The
resistance in dark may now be 50 or even 100 times as high as when the
cell was first made, yet, whenever exposed to sunlight it promptly shows
the same resistance that it did in the beginning. The various treatments,
and even accidents, through which it has passed in the mean time, seem
not to have stirred its molecular arrangement under the action of light,
but to have expended their forces in modifying the positions which the
molecules must normally assume in darkness.

_Practical applications_.--There are many peculiarities of action
occasionally found, and the causes of such actions are not always
discernible. In practice, I have been accustomed to find the
peculiarities and weaknesses of each cell by trial, developing its
strongest properties and avoiding its weaknesses, until, when the cell is
finished, it has a definite and known character, and is fitted for
certain uses and a certain line of treatment, which should not be
departed from, as it will be at the risk of temporarily disabling it. In
consequence of the time and labor expended in making cells, in the small
way, testing, repairing damages done during experiments, etc., the cost
of the cells now is unavoidably rather high. But if made in a commercial
way, all this would be reduced to a system, and the cost would be small.
I may say here that I do not make cells for sale.

The applications or uses for these cells are almost innumerable,
embracing every branch of electrical science, especially telegraphy,
telephony, and electric lighting, but I refrain from naming them. I may
be permitted, however, to lay before you two applications, because they
are of such general scientific interest. The first is my

_Photometer_.--The light to be measured is caused to shine upon a
photo-electric current-generating cell, and the current thus produced
flows through a galvano-metric coil in circuit, whose index indicates
upon its scale the intensity of the light. The scale may be calibrated by
means of standard candles, and the deflections of the index will then
give absolute readings showing the candle power of the light being
tested. Or, the current produced by that light and that produced by the
standard candle may be compared, according to any of the known ways of
arranging and comparing different lights--the cell being lastly exposed
alternately to the two lights, to see if the index gives exactly the same
deflection with each light.

This arrangement leaves untouched the old difficulty in photometry, that
arising from the different _colors_ of different lights. I propose to
obviate that difficulty in the following manner. As is well known, gold
transmits the green rays, silver the blue rays, and so on; therefore, a
cell faced with gold will be acted upon by the green rays, one faced with
silver by the blue rays, etc. Now, if we construct three cells (or any
other number), so faced that the three, collectively, will be acted upon
by all the colors, and arrange them around the light to be tested, at
equal distances therefrom, each cell will produce a current corresponding
to the colored rays suited to it, and all together will produce a current
corresponding to all the rays emitted by the light, no matter what the
proportions of the different colors may be. The three currents may act
upon the same index, but each should have its own coil, not only for the
sake of being able to join or to isolate their influences upon the index,
but also to avoid the resistances of the other cells. If a solid
transparent conductor of electricity could be found which could be thick
enough for practical use and yet would transmit all the rays perfectly,
i.e., transmit white light unchanged, that would be still better. I have
not yet found a satisfactory conductor of that kind, but I think the plan
stated will answer the same purpose. This portion of my system I have not
practically tested, but it appears to me to give good promise of removing
the color stumbling-block, which has so long defied all efforts to remove
it, and I therefore offer it for your consideration.

_Photo-electric regulator_.--My regulator consists of a
current-generating cell arranged in front of a light, say an electric
lamp, whose light represents the varying strength of the current which
supports it. The current produced in the cell by this light flows through
an electro-magnetic apparatus by means of which mechanical movement is
produced, and this motion is utilized for changing resistances, actuating
a valve, rotating brushes, moving switches, levers, or other devices.
This has been constructed on a small scale, and operates well, and I
think it is destined to be largely used, as a most sensitive, simple, and
perfect regulator for currents, lights, dynamos, motors, etc., etc.,
whether large or small.

In conclusion, I would say that the investigation of the physical
properties of selenium still offers a rare opportunity for making very
important discoveries. But candor compels me to add that whoever
undertakes the work will find it neither an easy nor a short one. My own
experience would enable me to describe to you scores of curious
experiments and still more curious and suggestive results, but lack of
time prevents my giving more than this very incomplete outline of my
discoveries.

       *       *       *       *       *




ELECTRICITY APPLIED TO THE MANUFACTURE OF VARNISH.


Messrs. Müthel & Lütche, of Berlin, recommend the following process for
the manufacture of varnish: The oils are treated by gases or gaseous
mixtures that have previously been submitted to the action of electric
discharges. The strongly oxidized oxygenated compounds that are formed
under such circumstances give rise, at a proper elevation of temperature,
to compounds less rich in oxygen, and the oxygen that is set free acts
upon the fatty acid that it is proposed to treat. A mixture of equal
parts of chlorine and steam may be very advantageously employed, as well
as anhydrous sulphuric acid and water, or oxygen, anhydrous sulphuric
acid and protoxide of nitrogen, nitrogen, oxygen, and hydrogen, protoxide
of nitrogen and air, or oxygen, and so on.

The apparatus is shown in section in the accompanying engraving; a is a
steam-pipe running from the boiler to the motor. From this pipe branch
conduits, b, that enter the vessels, B, in which the treatment is
effected, and that run spirally through the oil. At the lower part of the
vessel, B, there is tube wound into a flat spiral, and containing a large
number of exceedingly small apertures.

The oxidizing apparatus is shown at p. The gaseous mixture enters through
the tube, n, traverses the apparatus, p, and enters the vessel, B,
through the tubes, g and D. Fig. 2 gives the details of the oxidizing
apparatus, which consists of two concentric glass tubes, A and F,
soldered at x. A is closed beneath and held in a cylinder, C; F contains
a small aperture through which passes a tube, E. The gaseous mixture
enters through the latter, traverses the annular space between the tubes,
A and F, and then makes its exit through H, whence it goes to a similar
apparatus placed alongside of the other. The shaded parts of the
engraving represent bodies that are good conductors of electricity and
that communicate with the two poles of any electrice source whatever.

[Illustration: FIGS. 1 AND 2.]

The operation is as follows: After opening the tube, e, linseed oil is
introduced into the vessel, B, until the latter is half full, and, after
this, e is closed and the worm, S, is allowed to raise the temperature to
between 60° and 80°. Then the cock of the tube, d, which communicates
with an air pump, is opened, and the pressure is diminished to about 730
mm. of mercury. At this moment the oxidizing apparatus are put in
communication with an induction bobbin that is interposed in the circuit
of a dynamo, while through the tube, n, there is made to enter a mixture
of equal parts (in volume) of sulphurous acid, oxygen, and air. At the
same time, the cock of the tube, g, is opened, while the stirrer, T, is
set in motion. In this way we obtain, in a much shorter time than by
ordinary processes, a very liquid, transparent varnish, which, when
exposed to the air, quickly hardens. It is possible, with the same
process, to employ a mixture (in volumes) of two parts of protoxide of
nitrogen with one and a half parts of atmospheric air, or even protoxide
of nitrogen alone.

When it is judged that the operation is finished, the tube, g, is opened,
the stirrer is stopped, and the tube, c, is opened after d has been
closed. The steam then forces the varnish to pass through the tube, f,
and traverse the washing apparatus, which is filled half full of water,
that is slightly ammoniacal, and is heated by a circulation of steam, S.
Finally, the product, washed and free from every trace of acid is
collected upon making its exit from the tube, h.--_La Lumiere
Electrique._

       *       *       *       *       *




NAGLO BROTHERS' TELEPHONE SYSTEM.


We borrow from the _Elektrotechnische Zeitung_ the following details in
regard to the telephonic installations made by the Brothers Naglo at
Berlin. Fig. 1 gives the general arrangement of a station, where J is an
inductor set in motion through a winch, K, and a pair of friction
rollers; W, a polarized call; U, an ordinary two-direction commutator; B,
a lightning protector; and L and T, the two terminals of the apparatus,
one of them connecting with the line and the other with the earth. The
interesting point of this system is the automatic communication which
occurs when the inductor, J, is moved. At the same moment that the winch,
K, is being moved, the disk, P, is carried from right to left and brought
into contact with the spring, f_{2}. As soon as the winch is left to
itself a counter-spring forces the disk, P, to return to a contact with
the spring, f_{1}. Figs. 2 and 3 show the details of such communication.
The winch, K, is keyed to one of the extremities of a sleeve that carries
the disk, P, at its other extremity. This sleeve is fixed upon the axle
of the first friction roller, that is to say, upon the axle that controls
the motion of the inductor, and is provided at the center with two
helicoidal grooves, e, at right angles with one another. In these grooves
slides a tappet, n, connected with the axle.

[Illustration: FIG. 1.]

Under the influence of the counter-spring at the left of the disk, P, the
latter constantly tends to occupy the position shown in Fig. 2, which is
that of rest. As soon as the winch, K, is revolved, whatever be the
direction of the motion, the axle can only be carried along when the
tappet, n, has come to occupy the position shown in Fig. 3, that is to
say, when the disk has moved from right to left a distance corresponding
to the fraction of the helix formed in the sleeve.

This stated, it is easy to understand the travel of the currents. Fig. 1
shows the station at rest. The current that arrives through L passes
through the lightning protector, the body of the commutator, U, the
terminal, v, and the call, W, bifurcates at P, and is closed by the
earth. The inductor is in circuit, but, as it is in derivation, upon a
very feeble resistance, v, nearly the whole of the current passes through
the latter. When it is the station that is calling, the call, W, is put
in derivation upon the circuit, f_{2} p, h, so that the portion of the
circuit that passes through q W v is exceedingly feeble, and incapable of
operating the bell of the post that is calling.

[Illustration: FIGS. 2 AND 3.]

Finally, when the telephone is unhooked, the inductor, J, and the bell,
W, are thrown out of circuit, and the telephone is interposed between d
and i, that is, between L and T.--_La Lumiere Electrique_.

       *       *       *       *       *




THE GERARD ELECTRIC LAMP.


In the Gerard incandescent lamp the carbons have the form of a V. They
are obtained by agglomerating very finely powdered carbon, and passing it
through a draw plate. At their extremity they are cemented together with
a small quantity of carbon paste, and their connection with the platinum
conducting wires is effected by means of a cylinder of the same paste
surmounted by a cone. These couplings secure a good contact, and, by
their dimensions, prevent the attachments from becoming hot and
consequently injuring the carbon at this point. The cone forms a
connection of decreasing section, and prevents the carbon from getting
broken during carriage.

This process of manufacture permits of obtaining lamps of all
intensities, from 3 candles up. The following, according to Mr. Gerard,
are the consumptions of energy in each size of lamp:

             Candles.   Volts.   Amperes.
   No. 0.      10         16       1.5
    "  1.      25         25       2
    "  2.      50         30       2.5

[Illustration: GERARD'S INCANDESCENT LAMP.]

It will be seen that these lamps require a relatively intense current
with much less fall of potential than the Swan, for example--this being
due to the diameter of the filament. But, what is an inconvenience as
regards mounting, if we wish to supply them by ordinary machines (for
they must be mounted in series of 3 on each derived circuit if the
machine gives, as most frequently the case, 100 volts), is an advantage
as regards the quality and steadiness of the light and the duration of
the lamps.

The part in which the energy is expended is homogeneous, as might be
supposed from the mode of manufacture, and as may be ascertained from a
microscopical examination, and it is exempt from those variations in
composition that are found in carbons of a vegetable nature, like the
Edison. Besides, being of relatively large diameter, the lamp is capable
of supporting a very great increase of temperature.

The process employed for fixing the lamps is as simple as can be. Each
platinum wire is soldered to a piece of copper that surrounds the base of
the lamp and that is fixed to the glass with a special cement. These two
armatures intertwine, but at a sufficient distance apart to prevent
contact. They carry a longitudinal projection and an inflation that fit
by hard friction into two copper springs connected electrically with the
circuit. It is only necessary to lift the lamp in order to remove it from
the support; and the contrary operation is just as easy.--_Le Genie
Civil_.

       *       *       *       *       *




A NEW REFLECTING GALVANOMETER.


Fig. 1 shows an elevation of the instrument and a horizontal section of
the bobbins. Two pairs of bobbins, cc, cc, are so arranged that the axes
of each pair are parallel and in the same vertical plane. Each pair is
supported by a vertical brass plate, and the two plates make an angle of
about 106° with each other, so that the planes containing the axes of the
bobbins make an angle of about 74°. Two horseshoe magnets, m m, made of
1/25 inch steel wire, are connected by a very light piece of aluminum and
placed at such a distance from each other that, on being suspended, the
two branches of each of the magnets shall freely enter the respective
bores of the two bobbins fixed upon the same plate, and, when the whole
system is in equilibrium and the bobbins free from current, the two
branches of each of the magnets shall nearly coincide with the axes of
such bores. The magnets are not plane, but are curved so as to form
portions of a vertical cylinder whose axis coincides with the direction
of the suspension wire, and to which the axes of the bobbins are tangent
at their center, approximately to the points where the poles of the
magnets are situated.

[Illustration: FIG. 1. GRAY'S GALVANOMETER.]

The needles have been given this form so that their extremities shall not
touch the sides of the bore during considerable deflections.

In the instrument which the inventors, Messrs. T. & A. Gray, used in
their experiments upon the resistance of glass, the needles were arranged
so that their poles of contrary name were opposite.

[Illustration: FIG. 2.]

The system of needles is suspended from the extremity of a screw, p,
which passes into a nut, n, movable between two stationary pieces. On
revolving the nut, we cause the screw to rise or lower, along with the
entire suspended part, without twisting the thread.

The four bobbins are grouped for tension, and have a total resistance of
30,220 ohms. They contain 16,000 feet of No. 50 copper wire, forming
62,939 revolutions, nearly equally divided between the four bobbins. When
a current is passing through the bobbins, the poles of one of the
horseshoe magnets are attracted toward the interior of the corresponding
bobbins, while those of the other are repelled toward the exterior by the
two other bobbins. We thus have a couple which tends to cause the system
to revolve around the suspension axis. A mirror, which is fixed upon a
vertical piece of aluminum, a, gives, in the usual manner, a reflected
image upon a scale, thus allowing the deflections to be read. A
compensating magnet, M, is supported by a vertical column fixed to the
case, above the needles. This magnet may be placed in the different
azimuths by means of a tangential screw, t. The extremities of the bobbin
wires are connected with three terminals, T, T¹, T², and the
instrument may, by a proper arrangement, became differential. These
terminals, as well as the communicating wires, are insulated with
ebonite.

Thus arranged, the instrument is capable of making a deflection of one
division of 1/50 inch upon a scale placed at a distance of a little more
than a yard, with the current produced by one daniell of 10 ohms. This is
a degree of sensitiveness that cannot be obtained with any of the astatic
instruments known up to the present. By regulating the needles properly,
a greater degree of sensitiveness may be attained, but then the duration
of the needles' oscillation becomes too great. The sensitiveness of the
instrument is sufficiently great to allow it to be used in many cases,
even with a moderate duration of oscillation.

In their experiments upon the resistance of glass, the inventors employed
an instrument that was not arranged for giving great sensitiveness, and
one with which resistances of from 10^{4} to 10^{5} megohms could be
measured by the use of a pile of 120 daniells.

The instrument can be given another form. The four bobbins may be
arranged symmetrically in the same plane, and the two horseshoe magnets
be supported by an S-shaped aluminum bar. The latter traverses the plate
that supports the bobbins, in such a way that one of the magnets enters
one of the bobbins that correspond to it on one side of the plate, and
the other on the other side, as shown in Fig. 2. The bobbins are so
connected that, when they are traversed by a current, both magnets are at
the same time attracted toward the interior or repelled toward the
exterior of the bobbins. Such a form of the instrument has the advantage
of being more easily constructed, while the regulation of the magnets
with respect to the bore of the bobbins is easier.

The chief advantage of the instrument results from the fact that, owing
to the arrangement of the magnets and bobbins, a large portion of the
wires of the latter is situated very near the poles of the magnets, and
in a position very favorable for electro-magnetic action. The instrument
presents no difficulties as regards construction, and costs no more than
an ordinary one.

We might even arrange a single horseshoe magnet, or an S-shaped one,
horizontally, and employ but a single pair of bobbins, and thus have a
non-astatic apparatus based upon the same principle. But in astatic
instruments it is better to place the magnets in such a way that the two
branches shall be in the same vertical plane.

Were the line that joins the two poles vertical, the system would be
perfectly astatic in a uniform field, since each magnet in particular
would then be perfectly astatic. A pair of horseshoe magnets may thus be
regulated in such a way as to form a perfectly astatic system in a
uniform field and to preserve an almost invariable zero, this being
something that it is very difficult to obtain with the ordinary
arrangement of needles, especially when a compensating magnet is used;
for, in such a case, one of the needles becomes more or less magnetized,
while the other becomes demagnetized, according to the position of the
compensating magnet.--_La Lumiere Electrique_.

       *       *       *       *       *




HISTOLOGICAL METHODS.


A cat, dog, rabbit, or Guinea pig will furnish parts from which sections
can be cut for the study of histology. Whichever animal is selected
should be young and well developed. Put it under influence of chloroform,
and open into the cavity of the chest; make an incision into the right
ventricle, and allow the animal to bleed to death; cut the trachea and
inject the lungs with a solution of one and a half drachms of chromic
acid in one quart of water, care being taken not to overdistend the lung.
Tie the severed end to prevent the escape of the fluid, and carefully
remove the lung. It is a difficult thing to do this without rupturing it,
but with care and patience it can be done. Place the lungs in a solution
of the same strength as used for injecting; after fifteen or twenty hours
change it to a fresh solution, and allow it to remain for about a month,
and then change it to rectified spirits, in which it may remain until
required.

Cut the tongue into several transverse and longitudinal pieces, also the
small intestines, and put them into a solution of fifteen and one-half
grains chromic acid, thirty grammes bichromate of potash, and three pints
of water; change the solution the next day, and let them remain two weeks
and then place in spirits. Cut longitudinal and transverse portions of
the stomach and large intestines, wash in a weak solution of salt and
water, and put them in the same solution as used for the lungs, and treat
similarly.

Cut the kidneys longitudinally and transversely, and put them in a
solution of six and one-half drachms bichromate of potash, two and
one-half drachms sodium sulphate, one quart of water; change the solution
the next day, and at the end of four weeks transfer to alcohol. Wash the
inner surface of the bladder with salt and water, and after cutting it
longitudinally and transversely, put the sections in a solution of three
drachms bichromate of potash in a quart of water. Cut the liver into
small parts, and place in the same solution as used for the kidneys;
change the solution after a day, and let them remain four or five weeks,
then change to spirits. The spleen and portions of the thin abdominal
muscles may be placed in a solution of three drachms chromic acid to one
quart of water, and transferred to alcohol after three or four weeks.
Carefully remove an eye and divide it behind the crystalline lens, put
the posterior portion in a solution made by dissolving fifteen grs.
chromic acid in five drachms water, and slowly adding five and one-half
ounces alcohol; change to spirits in two weeks. The lens should be put in
the same solution, but should remain a few days longer. Open the head,
remove the brain, and place transverse and longitudinal sections of it
in spirits for eighteen hours, then transfer to a solution of one drachm
chromic acid in a quart of water, and let it remain until hard enough to
cut. Place the uterus in a solution of one and one-half drachms chromic
acid in one quart of water, change to a new solution the next day, and at
the end of a month transfer to alcohol.

The bones from one of the legs should be carefully cleaned of its
muscles, cut into several pieces, and placed in a solution of fifteen and
one-half grains chromic acid, one-half drachm nitric acid, and six ounces
water. Change the fluid frequently until the bones are sufficiently
softened, and then change to alcohol.

_Section cutting_ machines for cutting sections can be procured of the
dealers, but a very simple and effective one can be easily made if one
does not wish to go to the expense of buying an instrument.

A strip of wood twelve or fourteen inches long and about two inches wide
has attached to its center a bridge-shaped piece of wood, a, Fig. 1. This
is covered with a brass plate, c, pierced with a hole one-half of an inch
in diameter. This hole extends through the wood, and is fitted with a
piston. Two long narrow inclined planes of nearly equal inclination, b,
b, grooved to slide on each other, are placed under the bridge; the lower
is to be fastened to the board; the end of the piston rests on the upper
one. The object from which we desire to cut a section is placed in the
hole, in the piston. If the upper plane be pushed in, the piston will be
forced upward, and with it the object. As the inclination of the plane is
very gradual, the vertical motion will be very slight as compared with
the horizontal.

When the object is raised a little above the brass plate, a keen edged
razor, thoroughly wet, is pushed over the hole, cutting the object. This
gives the section a smooth surface, and even with the plate; now push the
plane forward one-eighth to one-quarter of an inch, and cut again; this
will give a thin section of the object. The thickness of the section
depends, of course, on the distance the wedge is pushed.

With a little practice, much better sections can be cut by the hand than
by any machine; this does not apply of course to large sections. A razor
of good steel, with a blade thin and hard, are the most essential points
in an instrument for hand cutting. For ordinary purposes it is not
necessary to have the blade ground flat on one side, although many prefer
it. The knife should always be thoroughly wet, in order that the cut
tissue may float over its surface. Water, alcohol or salt and water may
be used for this purpose.

[Illustration: FIG. 1.]

_To out a section by hand_, hold the object between the thumb and first
two fingers of the left hand, supporting the back of the knife by the
forefinger. The knife is to be held firmly in the right hand, and in
cutting should never be pushed, but drawn from heel to point obliquely
through the tissue. The section should be removed from the knife by a
camel's hair brush.

When the object is too small to hold, it is usually _embedded_ in some
convenient substance. A carrot is sometimes very useful for this purpose.
A hole rather smaller than the object is cut out of the middle. Put
whatever is to be cut into this, and cut a thin section of the whole. The
carrot does not cling to either the knife or the section, and the knife
is wetted at every slice by it.

Paraffin is the agent usually employed for embedding purposes. Melt it,
and add a little lard to soften it; the addition of a little clove oil
renders it less adhesive.

Melt the paraffin at as low a temperature as possible, and pour it into a
paper cone. Dip the object into this and remove immediately; as soon as
the layer of paraffin surrounding it becomes hardened, replace it in the
paraffin; this prevents overheating the tissues.

Where the tissues are too soft to be cut, they may be soaked in a
solution of gum arabic and dried; in this condition they can be readily
cut, after which the gum can be dissolved off. This is an extremely
useful method for cutting the lung or other organs where an interstitial
support is needed. For a very thin object, a cork fitting any kind of a
tube is to be split, and the object placed between the two parts; the
cork is then thrust into the tube, and a sufficient degree of firmness
will be obtained to allow cutting. The sections should always be
manipulated with camel's hair brushes.

Much practice will be required before dexterity is attained.

_Methods of preserving the tissues_.--All water must be removed from the
tissue, either by drying or by immersing it in rectified spirits, and
then in absolute alcohol, and the alcohol driven off by floating it upon
oil of clove or turpentine. The substances used to preserve the tissues
are Canada balsam, Dammar balsam, glycerine, Farrant's solution,
potassium acetate, spirits, naphtha, and creosote.

The section is to be floated on to the slide or placed in position with a
camel's hair brush. It should be spread out, and then examined under the
microscope for the purpose of improving its position if necessary, or of
removing any foreign particles. A drop of the preserving medium is then
placed upon it, and another placed on the cover and allowed to spread
out. The cover is then taken by a pair of pincers and inverted over the
object, and one edge brought to touch the slide at one part of its
margin. The cover is then gently lowered, and the whole space beneath the
cover filled and the tissue completely saturated. If air bubbles show
themselves, raise the cover at one corner and deposit a further quantity
of the medium.

The slide should be set aside for a few days. First, the excess of the
medium must be removed; if it is glycerine, much of it can be removed by
a piece of blotting paper, but the cover must not be touched, for it is
easily displaced; that near the cover can be replaced by a camel's hair
brush. A narrow ring of glycerine jelly should be placed around the edge
of the cover, to fix it before the cement is applied. When this has set,
a narrow strip of cement is to be put on, just slightly overlapping the
edge of the cover and outside the margin of the jelly. Until it has been
perfectly secured, a slide carrying glycerine must never be placed in an
inclined position, as its cover will slide off.

_Preservative media_.--Canada balsam may be prepared as follows: Place
some pure Canada balsam in a saucer, and cover with paper to exclude
dust; dry it in an oven at a temperature of 150°; when it cools, it will
become hard and crystalline. Dissolve this in benzole, and use in the
same way as glycerine.

Dammar is now used as a substitute for Canada balsam. By its use the
tissues are rendered more transparent. To prepare it, dissolve one-half
ounce of Dammar rosin and one-half ounce of gum mastic in three ounces of
benzole, and filter. This may be used to mount unsoftened bone and tooth,
hair, brain, and spinal column, and most tissues that have been hardened
in alcohol or chromic acid, which require to have their transparency
increased.

Glycerine is not adapted for white fibrous tissue or blood vessels,
unless they have been hardened in chromic acid, as it causes the white
fibers to swell up and lose their normal features. Sections of liver,
lung, skin, and alimentary canal show better in glycerine unless they
have been stained.

Farrant's solution may be substituted for glycerine in many instances,
because of its feebler tendency to render the tissues transparent. It
consists of equal parts of gum arabic, glycerine, and a saturated
solution of arsenious acid. In mounting preparations with this medium,
the covered object should be allowed to lie a day before the varnish is
applied, so that the cover may be fixed, and thereby prevented from being
displaced. Rectified spirits may be used for mounting softened bone and
tooth, and naphtha and creosote are useful for preserving urinary casts.

When the section is mounted in Canada or Dammar balsam, no cement is
required, but for all other preservative media the margin of the cover
must be covered with cement. To do this, dry the edges of the cover
thoroughly with bibulous paper, and paint a layer of gold size, allowing
it to overlap the cover an eighth or sixteenth of an inch, then cover
this with white zinc cement.

_Preparation for mounting the different tissues_.--To obtain a section of
bone or tooth requires a grinding down of the tissue until it is so thin
as to be transparent. A section should first be cut as thin as possible
by a fine saw. It should be attached by the flattest side to a piece of
glass, and then ground down by a grindstone or by very fine emery, on a
perfectly flat piece of lead. When sufficiently thin and transparent,
mount in rectified spirits or Dammar. Sections of the tongue may be made
by embedding in paraffin, and mounted in Farrant's solution or glycerine.

Sections of the stomach may also be made by embedding in paraffin, but
better ones can be made by freezing. Farrant's solution makes a good
mounting.

The intestines also give a better section from freezing than by
embedding, as the paraffin injures the villi; mount in the same medium as
the stomach.

The liver may be embedded in paraffin, and the section mounted in
Farrant's solution or glycerine. The kidney may be treated in the same
way. The cornea of the eye can be readily cut by embedding in paraffin,
and the section may be mounted in Farrant's solution. The crystalline
lens and retina may be treated similarly.

The brain and spinal cord should be embedded in paraffin or a carrot, and
the section mounted in Dammar. Sections of the uterus and ovaries are
best mounted in glycerine or Dammar. Sections of lung maybe made by
embedding in gum or by freezing, and mounted in Farrant's solution.

Every slide should be of uniform size, and labeled. The usual size is 3×1
inches, and should be of a good quality of glass, free from scratches or
air holes. They may be labeled either by writing with a diamond, or a
small piece of paper affixed to one end, on which is written what is
required.

       *       *       *       *       *




LIFE HISTORY OF A NEW SEPTIC ORGANISM.


At a recent meeting in London, of the Royal Miscroscopical Society, Dr.
Dallinger gave his annual address to what was probably the largest
gathering of Fellows ever assembled on a similar occasion. After briefly
referring to the increased interest lately manifested in the study of
minute organisms, and recalling the characteristics of the doctrines of
abiogenesis and biogenesis, he passed rapidly in review the results of
the observations of Tyndall, Huxley, and Pasteur as bearing upon these
questions, and called attention to the observations of Buchner as to the
transformation of _Bacillus anthracis_ and _Bacillus subtilis_, and _vice
versa_, and referred with approval to Dr. Klein's criticisms thereon.
Having spoken of the desirability of careful and continuous study of this
class of organisms, and the importance of endeavoring to establish the
relation of the pathogenic form to the whole group, he said he should be
better able to deal with the subject by recording a few ascertained facts
rather than by making a more extended review, and he therefore devoted
the main part of his address to a description of "the life history of a
septic organism hitherto unknown to science." In his observations of this
form--extending over four years--he had the advantage of the highest
quality of homogeneous lenses obtainable, ranging from one-tenth to
one-fiftieth of an inch, his chief reliance being placed upon a very
perfect one thirty-fifth of an inch; and from the continuous nature of
the observations as well as the circumstances under which they were
carried on, dry lenses had for the most part to be employed. Having in
his possession a maceration of cod-fish in a fluid obtained from boiled
rabbits, he found at the bottom of it, when in an almost exhausted
condition, a precipitate forming a slightly viscid mass, to which his
attention was particularly directed. It was seen to contain a vast number
of _Bacterium termo_, but on examination with a one-tenth inch objective
showed that it also contained a comparatively small number of intensely
active organisms--one being discovered in about eight or ten drops of the
sediment. These measured 1-10,000 of an inch in length by 1-19,500 of an
inch in breadth. The fluid had originally been kept at a temperature of
90° to 95° F., and it was noticed that, when placed upon a cold stage
under the microscope, the movements of the organisms became, gradually
slower, until at last they entirely ceased; the necessity, therefore,
arose for the use of a warm stage, and the very ingenious contrivance by
which a continuous and even temperature was maintained within the
one-tenth of a degree was exhibited. The greatest difficulty in the
matter was, however, experienced in obtaining specimens for observation,
in order to be able to trace them from their earliest to their latest
stage. The President then explained, by means of an admirable series of
illustrations projected upon a screen by the oxyhydrogen lantern, the
life history of the organism to which he had referred, exhibiting it
first as a translucent, elliptic, spindle-shaped body, with six long and
delicate flagella, the various positions in which the five specimens were
drawn giving a very good idea of its peculiar porpoiselike movements.

The various positions which it assumed in making an attack upon a portion
of decomposed matter were also shown, the movements quite fascinating the
observer by their rhythmical character. The supposed action of the
flagella in the production of the movements observed was explained,
distinct evidence being afforded of a remarkable spiral motion, at least
of those behind. The process of fission was illustrated in all its
observed stages from the first appearance of a construction to that of
final and complete separation, the whole being performed within the space
of eight or nine minutes. A description of the process of fusion from the
simple contact of two organisms to their entire absorption into each
other followed, as well as their transformation into a granular mass,
which gradually decreased in size in consequence of the dropping of a
train of granules in it wake as it moved across the field. The
development of these granules was traced from their minute semi-opaque
and spherical form to that of the perfect flagellate organism first
shown, the entire process being completed in about an hour. Experiments
as to their thermal death-point showed that, while the adults could not
be killed by a temperature less than 146° F., the highest point endured
by the germs was 190° F. Illustrations of a variety of other modes of
fission discovered in previous researches on similar forms were given,
showing the mode of multiple division and a similar process in the case
of an organism contained in an investing envelope. The President
concluded his address, which was listened to throughout with the greatest
attention, by remarking that, though the processes could be seen and
their progress traced, the _modus operandi_ was not traceable. Yet the
observer could not fail to be impressed with the perfect concurrent
adaptation of these organisms to the circumstances of their being; they
were subject to no caprices, their life-cycles were as perfect as those
of a crustacean or a bird, and while the action of the various processes
was certain, their rapidity of increase and the shortness of their life
history were such that they afforded a splendid opportunity of testing
the correctness of the Darwinian law.

       *       *       *       *       *




WINTER AND THE INSECTS.


For a number of years previous to 1878 we had in Pembroke but little or
no severe cold, owing to the prevalence of southeast, south, west, and
especially southwest winds. In many places, fuchsias that were left in
the ground for the entire year had not been frozen to the root within the
memory of man. Some of these plants had grown to be trees five or six
yards in height, and with a trunk the size of one's leg. Now, during the
same series of years, many insects that are common throughout the rest of
Great Britain did not cease to be rare with us, or rather were confined
to certain circumscribed limits. Thus, the Noctuellae, with the exception
of a few species abundant everywhere, were almost wanting, and I know of
no other country where the dearth of common species of nocturnal
butterflies was so great. But during the winter of 1878 there supervened
a radical change. Persistent winds from the northwest, driving back the
currents of warm air from the south, brought on an intense cold that
froze everything; or, when some variation occurred in them, clouds formed
and dissolved into a rain that immediately froze, so that the large roads
remained for weeks covered with a layer of rime from two to four inches
thick.

[Illustration: GREEN WOODPECKER SEARCHING FOR INSECTS.]

The winters of 1879 and 1880 were equally cold; we may even say that the
latter was the severest that had been experienced in fifty years. This
year the sea-sand, along with the ice and snow, formed a thick crust all
along the tide-line--this being something rarely seen along our coast.
The first of these three winters (1878-1879) killed all the arborescent
veronicas and a few sumacs. As for the fuchsias and myrtles, they were
frozen down to the level of the soil.

I now come to the effects of this severe cold upon the insects.

The Lepidoptera, which before were rare, became more and more common in
1879, 1880, and 1881, and so much so that during the last named year they
abounded; and species that had formerly been detected only at certain
favored points spread over the entire coast and into the interior of the
country. The geometers appeared in numbers that were unheard of. But this
change was especially striking as regards the Noctuellae, in view of the
previous rarity of the individuals belonging to this family.

We have here an example of the direct relation of cause to effect,
although I am not in a position to assert that the effect is always
produced in the same way. To me there is no question as to the fact that
the constitution of those insects which nature has accorded the faculty
of liberating is strengthened, and that their chances of life are
increased, if the cold of winter is intense enough to plunge them into an
absolute rest, and is not unseasonably affected by warm, spring-like
days. It is certain that such cold is capable of contributing largely to
the multiplication of the individuals of such species as hibernate in the
egg state, and it also has a beneficent influence upon those species
which, like the small social larvae, pass this season upon the earth
enveloped in a silken envelope, or, like the larvae of the Noctuellae,
between dead leaves or upon the ground itself.

On another hand, it cannot be doubted that mild winters greatly
contribute to the bringing about of a destruction of larvae and chrysalids
in two ways: First, they favor the development of mould, which, as well
known, attacks the larvae of insects when these have been enfeebled by an
excess of rain or dampness; and second, they permit beasts of prey to
continue to exercise their activity. Now, these latter are numerous.
Moles, instead of burying themselves deeply, then continue to excavate
near the surface, and shrew mice are constantly in search of food. These
small mammals, which abound in this district, destroy a large number of
chrysalids of Lepidoptera.

It is the same with birds. As soon as severe cold begins to prevail in
the north and east, they come in troops to the open fields and the
sheltered slope of the hills of our district. But it is scarcely worth
while to stop to tell of the skill and perseverance of these destroyer of
larvae. We may mention, the woodpecker, however, as a skillful searcher
for insects that lie hidden in places where the sun has melted the snow.
The carnivorous Coleoptera and the Forficulae are likewise generally in
motion during mild winters. Doubtless these last-named do not make very
large inroads in the ranks of larvae and chrysalids every day; yet, having
no other food, they destroy a goodly number of them. But I believe that
the devastations made in the army of insects by all these enemies united
do not equal those made by certain crustaceans--the wood lice.

During mild winters these pests multiply, eat, and prosper out of bounds,
and to such a point that, in a climate like ours, they become a true
scourge that prevails everywhere, out of doors and within. Once in a
place, they begin to look for larvae and chrysalids, which they devour.
The severe cold seems to have destroyed a certain number of them, since
they are now not so numerous by far; and it has at least certainly put a
stop to their devastations at an epoch when the larvae are more
particularly exposed to the attacks of their enemies. It is to this
cause, as well as to the preceding, that I am led to attribute the
extraordinary multiplication of so many species during the three last
summers, which were separated by severe winters. Last winter was mild,
and there is therefore no reason to expect that there will be another
multiplication; but I hope that the harm done by such a season will be
slight. It is the progressive multiplication of the destroyers, joined to
the correlative disappearance of the victims caused by a series of
temperate seasons, that is to be feared.

In support of the proposition that I maintain, I may mention still
another fact. While this district (Pembroke, Wales) is relatively poor in
species whose larvae feed and hibernate in the open air a few species of
Noctuellae, whose larvae live buried in the earth, are always abundant. The
country is relatively rich in spices of _Tortrix_, which develop and
hibernate in the stalks or roots of plants. It is also worthy of remark
that very few of our species seem to be incapable of enduring a severe
winter.--_C.G. Barret, in Science et Nature_.

       *       *       *       *       *




SILK WORM EGGS.


Prof. C.V. Riley, entomologist, announces that the Department of
Agriculture, Washington, will purchase during the coming summer such
quantities of silk worm eggs as may be deemed necessary for the
distribution that it is proposed to make for the season of 1886. So far
as found practicable, the eggs will be purchased of American producers.
There are certain precautions, however, that must be taken to insure
purchase. Eggs of improved races only (preferably of the French or
Italian Yellow Races) will be bought, and the producer should send one or
two samples of pierced cocoons with the eggs. In addition to this the
producer must conform to certain rules to be hereafter explained, so that
an examination may be made that will serve to show the degree of purity
of the eggs. No silk culturist should use his crop for the production of
eggs unless the worms have shown, until they began the spinning of their
cocoons, every sign of perfect, robust health. Any indication of the
disease called _flacherie_, from which the worms so often die after the
fourth moult and turn black from putrefaction, or of any other disease
from which silk worms suffer, should be considered as ample reason for
not using the cocoons for the purpose in question. They should, on the
other hand, be sold for the filature. If the worms have all the
indications of health until the spinning period, then the cocoons may be
used for the production of eggs. The following brief instructions will
prove of service to those who which to secure sound eggs:

[Illustration]

For each ounce of eggs to be produced, about three-quarters of a pound of
fresh cocoons from the finest and firmest in the lot should be chosen.
These should be strung in sets upon a thread, care being taken not to
pierce the chrysalis, and the strings hung in a cool, darkened room. The
moths generally emerge from the cocoons early in the morning, and will be
seen crawling about over these, the males being noticeable by their
smaller abdomens, more robust antennae, and by their greater activity. The
moths should be placed, regardless of sex, on a table, where they will
soon find their mates and couple. As soon as formed, the couples should
be removed to another table, that they may not be disturbed by the
flutterings of the single moths.

There should be prepared for each ounce of eggs to be produced, about
one hundred small bags of fine muslin, made in the following manner: Cut
the cloth in pieces 3×6 inches. Then fold one end over so as to leave a
single edge of about three-quarters of an inch, as shown in the
accompanying cut. This should be sewn up into a bag with the upper end
open, and then turned inside out, so that the seams will cause the sides
to bulge. Thus completed they are called "cells." The cells should be
strung on a cord stretched across the room.

The moths couple as a rule about eight o'clock in the morning. About four
in the afternoon they should be separated by taking them by the wings and
drawing them gently apart. Each female should now be placed by herself in
a cell, which is then closed by a pin as shown in the figure. Here she
will lay her eggs and in due time die. The males may as a rule be thrown
away, but it is wise to keep a few of the more active ones, in case there
should be a superabundance of females the following day.

When the females have finished laying their eggs, which operation
occupies about thirty-six hours, they are ready to be shipped to this
office. The cells, with their inclosed moths and eggs, should be placed
in a strong box of wood or tin, being packed in such a manner that they
will not be crushed, and mailed to the entomologist at the department. By
using the inclosed return penalty slip, payment of postage may be
avoided. The name of the sender should be placed in each box. The moths,
as soon as received, will be examined microscopically, and the eggs of
those which are found to be free from disease will be weighed and paid
for at the rate of $2.50 per ounce of 25 grammes (about 6-7 of an ounce
avoirdupois). Silk culturists are advised not to attempt the production
of eggs unless they are adepts at the industry, and have had at least one
season's experience. We would advise each person desiring to sell, to
send a sample first, with a statement of the quantity offered.

       *       *       *       *       *


Dr. Zintgraff of Bonn has taken a phonograph with him to Africa. He
intends to bring home phonograms of the savage dialects which he will
hire the natives to speak into the machine.

       *       *       *       *       *

[NATURE.]




DETERMINING THE MEAN DENSITY OF THE EARTH.


In _Nature_ for March 5 (p. 408) Prof. Mayer suggests an improvement in
our method of determining the mean density of the earth, from which it
appears that our plan has not been properly understood. This
misunderstanding, no doubt, has arisen from the incomplete description of
our method given in the _Nature_ (Jan. 15. p. 260) report of the
_Proceedings_ of the Berlin Physical Society, which report was probably
the only source of information accessible to Prof. Mayer. We are led
therefore to give a short description of our method.

Let H I K L represent a section of a cubical block of lead, about two
meters in the edge, and weighing 100,000 kilos. The balance, A B C, is
placed in the middle of the upper horizontal surface. It bears the
scale-pans, D and E. Under these scale-pans the block is bored vertically
through, and two other scale-pans, F and G, are suspended below the
block, attached to the balance by means of rods passing through these
openings.

A weight D is brought into equilibrium by weights in G. The weight in D
is acted upon by the earth's attraction + that of the block, and that in
G by the earth's attraction - that of the block. The weights in G are then
greater than that in D by twice the attraction of the block. The weight
in D in now removed to F, and counterbalanced by weights in E. The weight
in E will be less than that in F by twice the attraction of the block.
The difference of the two weighings gives therefore four times the
attraction of the block. A correction must be introduced for the
variation in the earth's attraction due to the different heights of D, E
and F, G.

[Illustration]

In order to obtain as great a deflection of the balance by the method
suggested by Prof. Mayer, each of the mercury spheres must exert the same
attraction as our lead block. This would require spheres having radii of
about one meter. The length of the beam of the balance would be
necessarily at least two meters. Besides, each mass of mercury, would
exert some attraction on the weight on the other side, and thus lessen
the deviation of the balance.

The method given by Prof. Mayer, except for the suggested employment of
mercury, is then no improvement on ours. If we should use mercury, we
would construct a cubical vessel to contain it, and use it as we propose
to use the lead block. The advantage of using mercury is, however,
counterbalanced by the difficulty of obtaining it in such large
quantities as would be necessary.

ARTHUR KONIG.

FRANZ RICHARZ.

Berlin, Physical Institute of the University, March 15.

       *       *       *       *       *




PHYSICS WITHOUT APPARATUS.


_The Porosity and Permeability of Bodies._--Take two tumblers of the same
size, place one of them upon a table, and pour into it a small quantity
of nearly boiling water. Cover this glass with a sheet of cardboard, and
invert the other one upon it. This second tumbler must be previously
wiped so as to have it perfectly dry and transparent. In a few seconds
the steam from the lower tumbler will traverse the cardboard (which will
thus exhibit its permeability), and will gradually fill the upper
tumbler, and condense and run down its sides. Wood and cloth may be
experimented with in succession, and will give the same results; but
there are other substances that are _impermeable_, and will not allow
themselves to be traversed. Such, for example, is the vulcanized rubber
of which waterproofs are made. This experiment explains to us why fog
is, as has been well said, so _penetrating_. It traverses the tissue of
our overcoat and of our flannel, and comes into contact with our body. On
the contrary, a rubber coat preserves us against its action.

[Illustration: Fig. 1.--EXPERIMENT UPON THE PERMEABILITY OF BODIES.]

_A Hot Air Balloon_.--Make a hollow cylinder of small diameter out of a
sheet of paper such as is used for cigarette packages, and turn in the
ends slightly so that it shall preserve its form. If the cylinder seems
too difficult to make, a cone may be substituted. Now set fire to the
cylinder or cone at its upper part. The paper will burn and become
converted into a thin sheet of ashes, which will contract and curl
inward. This light residuum of ashes, being filled with air rarefied by
combustion, will suddenly rise to a distance of two or three yards. Here
we have a Montgolfier balloon.--_La Nature_.

[Illustration: Fig. 2.--PRINCIPLE OF THE HOT AIR BALLOON.]

       *       *       *       *       *




THE CASINO AT MONTE CARLO.


The little city is situated about half way between Nizza and Mentone, and
it formerly was the chief city of a principality that belonged to the
family Grimaldi. Prince Florestan sold in 1860 his royal prerogatives to
the Emperor Napoleon, for three million francs, consequently the land
came under the jurisdiction of the French republic, but the city remained
in the Prince's possession, who, however, gave to the gambler Blanc the
privilege of erecting a gambling house upon the rocky shore of the sea.

[Illustration: THE CASINO AT MONTE CARLO.]

Enormous sums of money were spent to give this isolated cliff its present
appearance, covered as it is with beautiful buildings, hotels, and
villas, besides the magnificent Casino building, which was erected in
1862. Directly facing the sea, there is a succession of most beautiful
gardens and terraces.

But this establishment, which seems like paradise, has had a most
disastrous effect upon thousands of persons, and for a long time the
subject of influencing the French government to put a stop to this
gambling house has been agitated. It can scarcely be imagined how much
misery it has already caused. It is evident to every one that the keeper
of the bank makes considerable profit, as the chances are 63 times
greater in his favor than those of the player.

It is admitted that the profits amount every year to 17 million francs.
One can well imagine how many fortunes have been consumed every year to
make this profit; but the number cannot be determined.

       *       *       *       *       *




ON AN EXPRESS ENGINE.


It is a somewhat unpromising morning--the river is dark with fog and the
huge arch of the station nearly hidden by mist and steam. A cold, damp
wind makes the passengers hurry into the carriages, and strikes us
sharply as we step on to the foot-plate of the engine, which has just
joined the train. But as we get behind the shelter of the screen, we feel
a generous and slightly unctuous sensation of warmth very comforting to a
chilly man. The brasswork of the engine shines brilliantly, the footboard
has been newly scrubbed, and the driver and stoker stand waiting for the
signal. The needle shows that the steam is just below the pressure at
which it would begin to blow off; the water in the gauge glass is just
where it ought to be; in fact, the engine is in perfect condition and
ready for a start. The line is clear, the guard's whistle is answered by
our own, and we glide almost imperceptibly past the last few yards of the
platform. The driver opens the regulator till he is answered by a few
sounding puffs from the funnel, and then stands on the lookout for
signals so numerous that one wonders how he can tell which of the many
waving arms is raised or lowered for his guidance.

So he goes on, with hand on regulator and lever, gradually admitting more
steam as signal after signal comes nearer and then flies past us, till at
last we are clear of the suburbs and find ourselves on a gentle incline
and a straight road, with the open fields on either side. It is now that
the real business of the journey begins. Locomotives are as sensitive and
have as many peculiarities as horses, and have to be as carefully studied
if you would ride them fast and far. The lever is put into the most
suitable notch for working the steam expansively; the driver's hand is on
the regulator, not to be removed for the rest of the trip; the furnace
door is thrown wide open, and firing begins in earnest. Here it may not
be amiss to state, for the benefit of the uninitiated, that the regulator
controls the supply of steam from the boiler, while the lever enables the
driver to reverse the engine, or, as we have already stated, to expand
the steam by cutting it off before the end of the stroke. The engine
answers to the appeal like a living thing, and seems, with its steady
beat and sonorous blast, to settle down to its work. It is pleasant from
our seat in the corner of the screen to see this preparation for the work
ahead--the absolute calm of driver and stoker, who exchange no word, but
go steadfastly and quietly about their business; to feel the vibrations
from the rails beneath throb through one with slowly increasing rapidity,
or watch the trees and houses go past as gulls flap past a boat. For
there is a certain apparent swagging movement of the objects past which
one travels which can only be likened to the peculiar flight of a large
sea-bird. But now there are signs of increased activity on the
foot-plate; the stoker is busy controlling the feed of water to the
boiler, and fires at more frequent intervals; the driver's hand moves
oftener as he coaxes and encourages the engine along the road, his
slightest gesture betraying the utmost tension of eye and ear; the
stations, instead of echoing a long sullen roar as we go through them,
flash past us with a sudden rattle, and the engine surges down the line,
the train following with hot haste in its wake. We are in a cutting, and
the noise is deafening. Looking ahead, we see an apparently impenetrable
wall before us. Suddenly the whistle is opened, and we are in one of the
longest tunnels in England. The effect produced is the opposite of that
with which we are familiar in a railway carriage, for the change is one
from darkness to light rather than from light to darkness. The front of
the fire-box, foot-plate, and the tender, which had been rather hazily
perceived in the whirl of surrounding objects, now strike sharply on the
eye, lit up by the blaze from the fire, while overhead we see a glorious
canopy of ruddy-glowing steam. The speed is great, and the flames in the
fire-box boil up and form eddies like water at the doors of an opening
lock. Far ahead we see a white speck, which increases in size till the
fierce light from the fire pales, and we are once more in open day. The
weather has lifted, the sky is gray, but there is no longer any
appearance of mist. The hills on the horizon stand out sharply, and seem
to keep pace with us as the miles slip past. The line is clear; but there
is an important junction not far distant, and we slacken speed, to insure
a prompt pull-up should we find an adverse signal. The junction signals
are soon sighted; neither caution nor danger is indicated, and, once
clear of the station, we steam ahead as fast as ever. One peculiarity of
the view of the line ahead strikes us. Looking at a railroad line from a
field or neighboring highway, even where the rails are laid on a steep
incline, the rise and fall of the road is not very strikingly apparent.
Seen through the weather-glass, the track appears to be laid up hill and
down dale, like a path on the downs above high cliffs. Over it all we
advance, the engine laboring and puffing on one or two heavy gradients,
in spite of a full supply of steam, or tearing down the inclines with
hardly any, or none at all and the brake on. And here it may be noted
that, like modern men, modern engines have been put upon diet, and are
not allowed to indulge in so much victual as their forefathers. The
engine-driver, like the doctor of the new school, is determined not to
ruin his patient by over-indulgence, and will tell you severely enough
that "he will never be guilty of choking his engine with an over-supply
of steam." In the mean time, the character of the country we travel
through has changed. It has become more open, and there is a stiff
sea-breeze, which makes itself distinctly felt through the rush of air
produced by the speed at which we are going. We fly past idle streams and
ponds, and as the steam swirls over them are disappointed at producing
so little effect; but the ducks, their inhabitants, are well used to such
visitations, and hardly deign to move a feather. Suddenly we plunge into
a series of small chalk cuttings, and on emerging from them find
ourselves parallel with a grand line of downs. We speed by a curve or
two, and find ourselves on the sea-shore; one more tunnel, and with steam
off we go soberly into the last station. But there is one step more. The
breeze blows about our ears. Before us the rails are wet, for the sea
swept over them not many hours since, and to accomplish the last few
yards of our journey the lever controlling the sand-box must be used
liberally, to prevent slipping; the signal is given, and at a walking
pace we make our way to where the steamer is awaiting us. A gentle
application of the brake pulls us up, and the journey is over. It is
difficult to realize, as the engine stands quietly under the lee of the
pier while the driver examines the machinery, and the fire, burned low,
throws out a gentle warmth as we stand before it, that half an hour ago
we were tearing along the line at full speed, while the foot-plate that
is now so pleasant to lounge on throbbed beneath us. Nothing now remains
but to kill time as best we may till the return trip many hours hence. It
scarcely promises to be as comfortable as our morning ride, for the
weather has changed--it is blowing half a gale, and the rain comes down
in sheets. Our train is timed to start in the small hours, and the night
seems dirty and depressing enough as we make our way for a cup of coffee
to the refreshment room, where a melancholy Italian sits in sad state
eating Bath buns and drinking brandy. We walk past the train, laden with
miserable sea-sick humanity, and step on the engine, which stands in the
dark at the end of the platform. Time is up, and we pass from the dim
half-light of the station into outer darkness. A blacker night there
could hardly be; looking ahead there is nothing to be seen but one's own
reflection in the weather-glass. We are in the midst of obscurity, which
suddenly changes to a rich light as the whistle is opened and we enter a
tunnel. The effect is far more striking than in the daytime. The light is
more concentrated, and the mouth of the tunnel we have just entered might
be the entrance to Hades--for there is no telltale spot of light to prove
to our senses the existence of any opening at the other end. The sound
echoed from the walls and roof has a tremendous quality, and resolves
itself into a grand sort of Wagnerian rhythm, making a vast crescendo,
till with a rush we clear the tunnel, and are once more under the open
sky. The pace is increasing, the steady beat of the engine tells more
distinctly on the ear than in the daytime; the foot-plate is lit up by
the glare from the fire-door; but still there is nothing to be seen ahead
but the impenetrable night. Looking back, however, the scene is very
different. The tender and guard's van glow in the light thrown by the
fire, trees and houses by the side of the track stand out sharply for a
moment and are then lost to sight, the light from the carriage windows
produces the effect of the wake of a ship seen from the stern. Gradually
the clouds have rolled away, leaving the sky clear. The moon is seen
fitfully through the whirling steam; the surrounding country is visible
for miles round. The effect produced is unspeakably beautiful. In the
mean time let us turn our attention to the working of the engine. In the
first place, let us take note that, although the engine we are now on,
and that which took us from London, belong to the same type, their
performances are somewhat different. No two engines ever resemble each
other, no matter how carefully they may have been built from the same
plan, neither do any two drivers manage their engines precisely in the
same way. We have in this instance an excellent opportunity of comparing
two different methods of driving. It is the driver's principal object to
get the required amount of work out of his engine with the smallest
possible expenditure of coal and water. To obtain this result the steam
must be worked expansively, which is done by placing the valve gear in
such a position by means of the lever that the supply of steam to the
cylinders is cut off, as we have stated at the beginning of this article,
before the piston has accomplished its full stroke. There are two ways of
controlling the speed of an engine worked, as all locomotives are worked
now, expansively. You may keep the regulator wide open, so that there is
always a full supply of steam on its way to the cylinders, in which case
you increase or diminish the speed by using the steam more or less
expansively through the agency of the lever. Or you may work with the
same amount of expansion throughout the journey, and have command of the
engine by constantly changing the position of the regulator. There is no
doubt that the men who employ the latter method save something by it,
although this would hardly seem to be the opinion of the driver who is
bringing us rapidly nearer to London, for unlike the driver whom we
accompanied on the daylight journey, his hand is not often on the
regulator. As we rush on past countless signals, punctual to the minute,
yet always having ample time to slacken speed before we come to the
places where the different colored lights cluster thickest, we are
reminded once more how much is required of an express engine-man besides
a thorough acquaintance with the machinery he has to control. Traveling
at night at a great speed, he must know every inch of the road by
heart--where an incline begins and where it ends, and the exact spot at
which every signal along the line may be first sighted. He must have
completely mastered the working of the traffic on both the up and down
lines, and, above all, must be ready to act with the utmost promptitude
should anything go wrong. Mr. Michael Reynolds' publications have done
much toward enlightening the public on these points, but we doubt if
there are many who really know the amount of toil and danger cheerfully
faced by the men on the engine, who hold their lives in their hands day
after day for many years. These thoughts occur to us as we recross the
Thames and pull up at the platform after a thoroughly enjoyable
run.--_Saturday Review_.

       *       *       *       *       *


The mucilage on postage stamps may not be unhealthy, but persons having a
good many to affix to letter envelopes, circulars, newspapers, or other
wrappers every day, will consume considerable gum during a year. A less
objectionable mode of affixing stamps than the one usually employed is to
wet the upper right hand corner of the envelope, and press the stamp upon
it. It will be found to adhere quite as well as if the stamp went through
the moistening process.

       *       *       *       *       *




ERYTHROXYLON.

[Footnote: From an "Ephemeris of Materia Medica, Pharmacy, Therapeutics,
and Collateral Information." By Edward E. Squibb, M.D., Edward H. Squibb,
S.B., M.D., and Charles F. Squibb, A.B.]


COCA.

The condition of the principal markets of the world for this drug has
recently been exceptionally bad. That is, whether good coca was sought
for in the ports of Central and South America, or in London, Hamburg, or
New York, the search, even without limitation in price, was almost
invariably unsuccessful. Not that the drug, independent of quality, was
scarce, for hundreds of bales were accessible at all times; but the
quality was so poor as to be quite unfit for use. The samples, instead of
being green and fragrant, were brown and odorless, or musty and
disagreeable, at once condemning the lots they represented, to the most
casual observation, and yet the price was high enough to have represented
a good article. The best that could be done by the most careful buyers
was to accept occasional parcels, the best of which were of very inferior
quality, and therefore unfit for medicinal uses, and these at very high
prices. Coca is well known to be a very sensitive and perishable drug,
only fit for its somewhat equivocal uses when fresh and green, and well
cared for in packing and transportation. Very much like tea in this and
other respects, it should be packed and transported with the same care
and pains, in leaded chests, or in some equivalent package. It is very
well known that tea, if managed, transported, handled, and sold as coca
is, would be nearly or quite worthless, and therefore coca managed as the
great mass of it is must be nearly all of it comparatively worthless. If
used as tea is, this would probably soon appear; but when used as a
medicine which has been highly extolled and well advertised, it seems to
go on equally well whether of good or bad quality. It is pretty safe to
say that nineteen-twentieths of the coca seen in this market within the
past two years must be almost inert and valueless, yet all is sold and
used, and its reputation as a therapeutic agent is pretty well kept up.
At least many thousands of pounds of the brown ill-smelling leaf, and of
preparations made from it, are annually sold. And worse than this,
considerable quantities of a handsome looking green leaf, well put up and
well taken care of, have been sold and used as coca, when wanting in
nearly all its characteristics.

The writer for more than a year past has seen but one or two small lots
of moderately good coca, and in common with other buyers has been obliged
to buy the best that could be found to keep up his supply of the fluid
extract. Almost every purchase has been made on mental protest, and he
has been ashamed of every pound of fluid extract sent out, from the
knowledge that it was of poor quality; and there seems to be no more
prospect of a supply of better quality than there was this time last
year, because so long as an inferior quality sells in such enormous
quantities at good prices the demands of trade are satisfied.

Under this condition of the markets, the writer has finally decided to
give up making a fluid extract of coca, and has left it off his list,
adopting a fluid extract of tea instead, as a superior substitute, for
those who may choose to use it, and regrets that this course was not
taken a year ago.

The character of coca as a therapeutic agent is not very good. The florid
stories of a multitude of travelers and writers, up to and including the
testimony of Dr. Mantegazza, received a considerable support from so good
an authority as Sir Robert Christison, who reported very definite results
from trials made upon himself, and upon several students under his
immediate control and observation; and his results seem to have led to a
very careful and exhaustive series of observations at University College,
London, by Mr. Dowdeswell. This paper, published in _The Lancet_ of April
29 and May 6, 1876, pp. 631 and 664, is entitled "The Coca Leaf:
Observations on the Properties and Action of the Leaf of the Coca Plant
(Erythroxylon coca), made in the Physiological Laboratory of University
College, by G.F. Dowdeswell, B.A." The results of these investigations
were absolutely negative, and at the close of the work the investigator
says: "Without asserting that it is positively inert, it is concluded
from these experiments that its action is so slight as to preclude the
idea of its having any value either therapeutically or popularly; and it
is the belief of the writer, from observation upon the effect on the
pulse, etc., of tea, milk and water, and even plain water, hot, tepid,
and cold, that such things may, at slightly different temperatures,
produce a more decided effect than even large doses of coca, if taken at
about the temperature of the body."

Conflicting and contradictory testimony from competent authority is not
uncommon in therapeutics, and the reasons for it are well recognized in
the impossibility of an equality in the conditions and circumstances of
the investigations, and hence the general decision commonly reached is
upon the principle of averages.

There can hardly be a reasonable doubt that coca, in common with tea and
coffee and other similar articles, has a refreshing, recuperative, and
sustaining effect upon human beings, and when well cultivated, well
cured, and well preserved, so as to reach its uses of good quality and in
good condition, it is at least equal to good tea, and available for
important therapeutic uses. Mr. Dowdeswell supposed that he used good
coca, but it is very easy to see that with any amount of care and pains
he may have been mistaken in this. Had he but used the same parcel of
coca that Sir Robert Christison did, the results of the two observers
would be absolutely incomprehensible; and the results, in the absence of
any testimony on that point, simply prove that the two observers were
using a different article, though under the same name, and possibly with
the same care in selection. On Sir Robert Christison's side of the
question there are many competent observers whose testimony is spread
over many years; while on Mr. Dowdeswell's side there are fewer
observers. But there has been no observer on either side whose researches
have been anything like so thorough, so extended, or so accurate as those
of Mr. Dowdeswell. Indeed, no other account has been met with wherein the
modern methods of precision have been applied to the question at all; the
other testimony being all rather loose and indefinite, often at second or
third hands, or from the narratives of more or less enthusiastic
travelers. But if Mr. Dowdeswell's results be accepted as being
conclusive, the annual consumption of 40,000,000 pounds of coca at a cost
of 10,000,000 dollars promotes this substance to take rank among the
large economic blunders of the age.[9]

[Footnote 9: An excellent summing up of the character and history of
coca, from which some of the writer's information has been obtained, will
be found in "Medicinal Plants," by Bentley and Trimen, vol. i., article
40.]

The testimony in regard to the effects of tea, coffee, Paraguay tea,
Guarana and Kola nuts, is all of a similar character to that upon coca.
Each of these substances seems to have come into use independently, in
widely separated countries, to produce the same effects, namely, to
refresh, renew, or sustain the physical and mental organism, and it was a
curious surprise to find, after they had all been thus long used, that
although each came from a different natural order of plants, the same
active principle--namely, caffeine--could be extracted in different
proportions from all. It is now still more curious, however, to find that
for centuries another plant, namely coca, yielding a different principle,
has been in use for similar purposes, the effects of which differ as
little from those of tea, coffee, etc., as these do among themselves. Yet
cocaine is chemically very different from caffeine, simply producing a
similar physiological effect in much smaller doses. All these substances
in their natural condition seem to be identical in their general
physiological effect, but idiosyncrasy, or different individual
impressibility or sensitiveness, causes a different action, as well in
quality as in degree from the different substances, upon some persons.

In order to throw a little additional light on the comparative activity
of the principal individuals of this group of substances, the following
trials were made. It is generally admitted, and is probably true, that
the same power in these agents which refreshes, recuperates, and sustains
in the condition which needs or requires such effects also counteracts
the tendency to sleep, or produces wakefulness when a tendency to sleep
exists; and, therefore, if a tendency or disposition to sleep could be
prevented by these agents, this tendency might be used as a measure of
their effects when used in varying quantities, and thus measure the
agents against each other for dose or quantitative effect. In this way
the proposition is to first measure coca against tea, then coffee against
guarana, and finally to compare the four agents, using pure caffeine as a
kind of standard to measure by.

An opportunity for such trials occurred in a healthy individual
sixty-five years old, not habituated to the use of either tea, coffee,
tobacco, or any other narcotic substances, of good physical condition and
regular habits, and not very susceptible or sensitive to the action of
nervines or so-called anti-spasmodics. Quantities of preparations of
valerian, asafoetida, compound spirit of ether, etc., which would yield a
prompt effect upon many individuals seem to have little or no effect upon
him, nor do moderate quantities of wines or spirits stimulate him. That
is to say, he has not a very impressible nervous organization, is not
imaginative, nor very liable to accept results on insufficient or partial
evidence.

Fully occupied with work, both physical and mental in due proportion, for
more than ten hours every secular day, when evening comes he finds
himself unable to read long on account of a drowsiness supposed to be of
a purely physiological character. With a full breakfast at about 7:30, a
full dinner at about 2:30, and a light evening meal about 7, and no
stimulants, or tea, or coffee at any time, he finds, as a matter of not
invariable but general habit, that by half past 8 drowsiness becomes so
dominant that it becomes almost impossible, and generally impracticable,
to avoid falling asleep in his chair while attempting to read, even
though ordinary conversation be carried on around him.

The first trial to combat or prevent this drowsiness was made with
caffeine. The first specimen used was a very beautiful article made by
Merck of Darmstadt, and after that by pure specimens made for the
purpose, the two kinds being found identical in effect.

Commencing with a one grain dose at about 6:30 P.M., on alternate
evenings, leaving the intermediate evenings in order to be sure that the
nightly tendency still persisted, and increasing by half a grain each
alternate evening, no very definite effect was perceived, until the dose
reached 2½ grains, and this dose simply rendered the tendency to sleep
resistible by effort. After an interval of three evenings, with the
tendency to sleep recurring with somewhat varying force each evening, a
dose of 3 grains was taken, the maximum single dose of the German
Pharmacopoeia. This gave a comfortable evening of restedness, without
sleep or any very strong tendency to it until ten o'clock. Without
anything to counteract sleep, the rule was to read with difficulty by
nine, without much comprehension by quarter past nine, and either be
asleep or go to bed by half past nine. The 3 grain dose of caffeine
repeatedly obviated all this discomfort up to ten o'clock, but did not
prevent the habitual, prompt, and sound sleep, from the time of going to
bed till morning.

This was the model established, upon and by which to measure all the
other agents, and they were never taken nearer than on alternate
evenings, with occasional longer intervals, especially when the final
doses of record were to be taken.

The next agent tried in precisely this same way was coca; and knowing
that the quality of that which was attainable was very low, the
commencing dose of the leaf in substance was 2 drachms, or about 8
grammes. This gave no very definite effect, but 2½ drachms did give a
definite effect, and a subsequent dose of 2½ fluid drachms of a well made
fluid extract of coca gave about the same effect as 2½ grains of
caffeine. Three fluid drachms of the fluid extract were about equivalent
to 3 grains of caffeine.

Both the coca used and the fluid extract were then assayed by the modern
methods, for the proportion of the alkaloid they contained.

The only assays of coca that could be found conveniently were those of
Dr. Albert Niemann, of Goslar, given in the _American Journal of
Pharmacy_, vol. xxxiii., p. 222, who obtained 0.25 per cent.; and of
Prof. Jno. M. Maisch, in the same volume of the same journal, p. 496, who
obtained 4 grains of alkaloid from 1,500 grains of coca, which is also
about a quarter of one per cent. These assays were, however, very old,
and made by the old process. The process used by the writer was the more
modern one of Dragendorff slightly modified. It was as follows:

Thirty grammes of powdered coca, thoroughly mixed in a mortar with 8
grammes of caustic magnesia, were stirred into 200 c.c. of boiling water,
and the mixture boiled for ten minutes. The liquid was filtered off, and
the residue percolated with about 60 c.c. of water. It was then again
stirred into 150 c.c. of boiling water, and was again boiled and
percolated until apparently thoroughly exhausted. The total liquid,
amounting to more than 600 c.c., was evaporated on a water-bath,
commencing with the weaker portions, so that the stronger ones might be
exposed to the heat for the shortest time, until reduced to about 20 c.c.
This liquid extract was transferred to a flask, and vigorously shaken
with 50 c.c. of strong ether. The ether was poured off, as closely as
practicable, into a tared capsule, where it was allowed to evaporate
spontaneously. A second and third portion of ether, each of 50 c.c., were
used in the same way, and the whole evaporated to dryness in the capsule.
A scanty, greenish, oily residue was left in the capsule, in which there
was no appearance of a crystallized alkaloid. The capsule and contents
were then weighed and the weight noted. The oily residue was then
repeatedly washed with small quantities of water, until the washings no
longer affected litmus-paper. The oily matter adhered to the capsule
during this process, no part of it coming off with the washing, and at
the end of the washing the capsule and contents were again dried and
weighed, and the weight subtracted from the original weight. The
difference was taken as the alkaloid cocaine, and it amounted to 0.077
grm., equal to 0.26 per cent.

Several preliminary assays were made in reaching this method. Some
authorities recommend the very finely powdered mixture of coca and
magnesia, or coca and lime, to be at once exhausted with ether. Others
recommend that the mixture be made into a paste with water, and after
drying on a water-bath that it be then exhausted with ether. This is
better, but neither of these methods were satisfactory.

Finally, 30 c.c. of a well made fluid extract of the same coca was
thoroughly mixed with 8 grms. of caustic magnesia in a capsule, and the
mixture dried on a water-bath and powdered. This powder was then
exhausted, one part by ether and the other part by chloroform, exactly as
in the method given, both parts giving very slightly higher results. As a
check upon the results, the solution of alkaloid washed out was titrated
with normal solution of oxalic acid.

From all this it would appear that this inferior coca of the markets, or
rather the best that can be selected from it, yields about the same
proportion of the alkaloid as was obtained by Niemann and Maisch, but it
has been shown that, by the older processes of assay used by them, much
of the alkaloid was probably lost or destroyed, and that much better
results are generally obtained by the modern process.

Now, since 3 drachms of this coca, or three fluid drachms of its fluid
extract, gave the same physiological, or perhaps therapeutical, effect as
3 grains of caffeine, and as the 3 drachms contained about 0.45 grain of
cocaine, it follows that cocaine is about 6.5 times more effective than
caffeine; but it also follows that the coca accessible, and even the very
best coca, contains very much less of its alkaloid than those articles
which yield caffeine do of that principle.

       *       *       *       *       *




THE MELLOCO.


ULLUCUS TUBEROSA.--Early last year two tubers of this plant were received
at Kew from Caracas, and from out of doors in a prepared bed in June. The
result of this experiment, together with a few particulars as to the
esculent properties of the tubers, may be worth recording, as I believe
several gardeners, among them being the Messrs. Sutton, have obtained
tubers of the Ullucus from Kew with a view to giving it a trial. The two
Caracas tubers mentioned above were as large as hens' eggs, rather
longer, and somewhat flattened; the skin was red, as in some potatoes.
These, when placed in heat, rapidly developed shoots, which were removed
as soon as they were strong enough to form cuttings; in this way about a
hundred sturdy young plants were obtained and made ready for planting out
of doors in June. They were planted in a light, sandy, well manured soil
in a position exposed to full sunshine. Here they grew quickly, forming
by the middle of August tufts of shoots and leaves one foot across. They
were earthed up as for potatoes, and the strongest shoots were pegged
down and partly covered with soil, though the latter proved unnecessary.
At this time there were no tubers nor any signs of them. On again
examining the plants in September (about the middle), we were surprised
to find no tubers had yet been formed. The plants were now very strong,
and it was therefore concluded that instead of forming tubers the
strength of the plants had "run to leaves." We gave them up, no further
notice being taken of them till the frost came, when on perceiving that a
frost of four or five degrees did not injure the foliage, we again
examined the plants, and found an abundant crop of tubers just below the
surface of the soil, and varying in size from that of peas to pigeons'
eggs. The plants were left till the haulms had been destroyed by cold,
after which the tubers were gathered. On cooking some of the larger ones
by boiling for half an hour, we found them still rather hard, and with a
flavor of potatoes, almost concealed under a strong earthy taste, quite
disagreeable and soap-like. Considering how short a time these tubers had
had to grow in it is not improbable that their hardness and disagreeable
taste were owing to their being unripe; no doubt young, green potatoes
(these Ullucus tubers were partly green) would be quite as nauseous as
these were.

[Illustration: MELLOCO TUBERS.]

We are told that the Ullucus is extensively cultivated in Peru and
Bolivia, in the elevated regions where the common potato also thrives,
and with which the Ullucus is equally popular as a tuber-yielding plant.
In the _Gardeners' Chronicle_ for 1848, p. 862, Mr. J.B. Pentland stated
that the Ullucus "is planted in July or August, the seed employed being
generally the smaller tubers, unfit for food, and is gathered in during
the last week of April. These two periods of the year are the spring and
autumn in the southern hemisphere. The mode of cultivation is in drills,
into which the root is dropped, with a little manure. The climate, even
during the summer season, is severe, scarcely a night passing over
without the streams being frozen over, the sky being in general cloudless
at all periods of the year except during the rainy season (December to
March). Mean temperature about 49°." This information seems to support
the view formed of this plant from its behavior at Kew last year, namely,
that the tubers are formed on the approach of cold weather, and that, so
long as the weather is warm and bright, leaves only are developed. Plants
grown in houses where the temperature has not been allowed to fall below
50° in winter did not form any tubers, although they were in good health.
We found no tubers on the plants grown out of doors till some time after
the return of cold, wet weather. It seems likely that this plant does not
develop tubers unless its existence is threatened by cold; at all events,
such a conclusion seems reasonable from the above statements.

Possibly a wet and rather cold autumn would be favorable to this plant
and the production of its tubers--such a season, for instance, as would
be most unfavorable for the common potato. It would be worth while
testing the Ullucus for low and cold situations where the potato would
not thrive. There is not much probability of the former ever proving a
substitute for or even a rival to the potato, at least in this country;
but there is room for another good esculent, and the Ullucus is prolific
enough, hardy enough, and, we suppose, when properly grown, palatable
enough to be worthy a trial. In the _Gardeners' Chronicle_ for 1848, p.
828, will be found a most interesting detailed account of experiments
made with this plant in France by M. Louis Vilmorin.--_W. Waston, Kew;
The Gardeners' Chronicle_.

       *       *       *       *       *


A catalogue, containing brief notices of many important scientific papers
heretofore published in the SUPPLEMENT, may be had gratis at this office.


       *       *       *       *       *

THE SCIENTIFIC AMERICAN SUPPLEMENT.

PUBLISHED WEEKLY.

TERMS OF SUBSCRIPTION, $5 A YEAR.

Sent by mail, postage prepaid, to subscribers in any part of the United
States or Canada. Six dollars a year, sent, prepaid, to any foreign
country.

All the back numbers of THE SUPPLEMENT, from the commencement, January 1,
1876, can be had. Price, 10 cents each.

All the back volumes of THE SUPPLEMENT can likewise be supplied. Two
volumes are issued yearly. Price of each volume, $2.50, stitched in
paper, or $3.50, bound in stiff covers.

COMBINED RATES--One copy of SCIENTIFIC AMERICAN and one copy of
SCIENTIFIC AMERICAN SUPPLEMENT, one year, postpaid, $7.00.

A liberal discount to booksellers, news agents, and canvassers.


MUNN & CO., Publishers,

361 Broadway, New York, N.Y.


       *       *       *       *       *


PATENTS.

In connection with the SCIENTIFIC AMERICAN, Messrs. MUNN & Co. are
Solicitors of American and Foreign Patents, have had 40 years'
experience, and now have the largest establishment in the world. Patents
are obtained on the best terms.

A special notice is made in the SCIENTIFIC AMERICAN of all
Inventions patented through this Agency, with the name and residence of
the Patentee. By the immense circulation thus given, public attention is
directed to the merits of the new patent, and sales or introduction often
easily effected.

Any person who has made a new discovery or invention can ascertain, free
of charge, whether a patent can probably be obtained, by writing to MUNN
& Co.

We also send free our Hand Book about the Patent Laws, Patents, Caveats,
Trade Marks, their costs, and how procured. Address

MUNN & CO., 361 Broadway, New York.

Branch Office, cor. F and 7th Sts., Washington, D.C.