## The Project Gutenberg eBook of Suggestions for Fairs and Bazaars

This ebook is for the use of anyone anywhere in the United States and most other parts of the world at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this ebook or online at www.gutenberg.org. If you are not located in the United States, you will have to check the laws of the country where you are located before using this eBook.

Title: Suggestions for Fairs and Bazaars

Author: American Thread Company

Release date: May 21, 2020 [eBook #62190]
Most recently updated: October 18, 2024

Language: English

Credits: Produced by Stephen Hutcheson and the Online Distributed
Proofreading Team at https://www.pgdp.net

*** START OF THE PROJECT GUTENBERG EBOOK SUGGESTIONS FOR FAIRS AND BAZAARS ***

STAR BOOK No. 98 10 CENTS

# Suggestions for FAIRS and BAZAARS

DOILIES • HOT PLATE MATS • PIN CUSHIONS • POT HOLDERS • NAPKIN HOLDERS • CHAIR BACKS

The American Thread Company
260 W. BROADWAY, NEW YORK 13, N. Y.

Copyright 1953, The American Thread Co., Inc.
Printed in U. S. A.

CROCHET ABBREVIATIONS
ch | Chain
s c | Single Crochet
s d c | Short Double Crochet
d c | Double Crochet
tr c | Treble Crochet
d tr c | Double Treble Crochet
tr tr c | Treble Treble Crochet
sl st | Slip Stitch
st | Stitch
sts | Stitches

An Asterisk (*) indicates that the instructions immediately following are to be repeated the given number of times plus the original. ** Are used in the same way.

2

## Pineapple Doily

18 INCHES IN DIAMETER

Materials Required:
  AMERICAN THREAD COMPANY
  “GEM” CROCHET COTTON, Article 35, size 30
  2 balls White.
  or
  “STAR” CROCHET COTTON, Article 20, size 30
  3 balls White.
  Steel crochet hook No. 12.

Ch 10, join to form a ring, ch 4 and work 31 tr c in ring, join in 4th st of ch.

2nd Round. Ch 4 (always count as part of 1st cluster st at beginning of each round), 2 tr c in same space keeping last loop of each tr c on hook, thread over and work off all loops at one time, * ch 3, skip 1 tr c, cluster st in next tr c (cluster st: 3 tr c in same space keeping last loop of each tr c on hook, thread over and work off all loops at one time), repeat from * all around, ch 3, join in top of 1st cluster st.

3rd Round. Ch 4, cluster st in same space, * ch 2, tr c over next loop, ch 2, cluster st in next cluster st, repeat from * all around ending with ch 2, tr c over last loop, ch 2, join.

4th Round. Ch 4, cluster st in same space, * ch 3, tr c in next tr c, ch 3, cluster st in next cluster st, repeat from * all around ending with ch 3, tr c in next tr c, ch 3, join.

5th Round. Repeat 4th round but having ch 4 between cluster sts and tr c’s.

6th Round. Repeat 4th round but having ch 5 between cluster sts and tr c’s.

7th Round. Ch 4, cluster st in same space, ch 3, cluster st in same space (cluster st shell), * ch 4, tr c in next tr c, ch 4, cluster st shell in next cluster st, repeat from * all around ending with ch 4, tr c in next tr c, ch 4, join.

8th Round. Ch 4, cluster st in same space, * ch 5, cluster st in next cluster st of same cluster st shell, ch 3, tr c in next tr c, ch 3, cluster st in 1st cluster st of next cluster st shell, repeat from * all around ending to correspond, ch 3, join.

9th Round. Ch 4, cluster st in same space, * ch 9, cluster st in next cluster st, ch 3, tr c in next tr c, ch 3, cluster st in next cluster st, repeat from * all around ending to correspond, ch 3, join.

10th Round. Ch 4, cluster st in same space, ch 6, sl st in 6th st from hook for picot, * ch 13, s c in 6th st from hook to form picot, ch 7, cluster st in next cluster st, ch 6, sl st in 6th st from hook for picot, cluster st in next cluster st, repeat from * all around, ending to correspond, join.

11th Round. Sl st into picot, ch 4, cluster st shell in same picot, * ch 5, 6 tr c in next picot, ch 5, cluster st shell in next picot, repeat from * all around ending to correspond, ch 5, join. All shells are cluster st shells and will be referred to as shells for remainder of doily.

12th Round. Sl st into center of shell, ch 4, shell in same space, ** ch 5, s c in 1st tr c, * ch 6, s c in next tr c, repeat from * 4 times (pineapple), ch 5, shell in center of next shell, repeat from ** all around ending to correspond, ch 5, join.

13th Round. Sl st into shell, ch 4, shell in same space, ** ch 6, skip 1 loop, s c in 1st loop of pineapple, * ch 6, s c in next loop, repeat from * 3 times, ch 6, shell in next shell, repeat from ** all around ending to correspond, ch 6, join.

14th Round. Same as last round but having 3 loops across each pineapple.

15th Round. Sl st into shell, ch 4, shell in same space, ch 3, cluster st in same space, ** ch 6, s c in 1st loop of pineapple, * ch 6, s c in next loop, repeat from * once, ch 6, 3 cluster sts with ch 3 between each cluster st in center of next shell, repeat from ** all around ending to correspond, join.

16th Round. Sl st into shell, ch 4, shell in same space, * ch 9, s c in 6th st from hook for picot, ch 3, shell in next ch 3 loop, ch 6, s c in 1st loop of pineapple, ch 6, s c in next loop, ch 6, shell in next ch 3 loop, repeat from * all around ending to correspond, join.

17th Round. Sl st into shell, ch 4, shell in same space, * ch 5, 7 tr c in next picot, ch 5, shell in next shell, ch 6, s c in last loop of pineapple, ch 6, shell in next shell, repeat from * all around ending to correspond, join.

18th Round. Sl st into shell, ch 4, shell in same space, ** ch 5, s c in next tr c, * ch 6, s c in next tr c, repeat from * 5 times, ch 5, shell in next shell, ch 6, s c in next s c, ch 6, shell in next shell, repeat from ** all around ending to correspond, join.

19th Round. Sl st into shell, ch 4, shell in same space, ** ch 6, s c in 1st loop of pineapple, * ch 6, s c in next loop, repeat from * 4 times, ch 6, shell in next shell, shell in next shell, repeat from ** all around ending to correspond, join.

20th Round. Sl st into shell, ch 4, shell in same space, * ch 6, s c in 1st loop of pineapple, work 4-ch 6 loops across pineapple, ch 6, shell in next shell, ch 1, shell in next shell, repeat from * all around ending to correspond, join.

21st Round. Same as last round but having 3 loops across each pineapple and ch 2 between shells.

22nd Round. Sl st into shell, ch 4, shell in same space, ** ch 6, s c in 1st loop of pineapple, ch 6, s c in next loop, repeat from * once, ch 6, shell in next shell, ch 9, s c in 6th st from hook for picot, ch 3, shell in next shell, repeat from ** all around ending to correspond, join.

23rd Round. Sl st into shell, ch 4, shell in same space, * ch 6, s c in 1st loop of pineapple, ch 6, s c in next loop, ch 6, shell in next shell, ch 6, 8 tr c in next picot, ch 6, shell in next shell, repeat from * all around ending to correspond, join.

24th Round. Sl st into shell, ch 4, shell in same space, ** ch 6, s c in last loop of pineapple, ch 6, shell in next shell, ch 6, s c in 1st tr c, * ch 6, s c in next tr c, repeat from * 6 times, ch 6, shell in next shell, repeat from ** all around ending to correspond, join.

3

25th Round. Sl st into shell, ch 4, shell in same space, ** ch 6, s c in next s c, ch 6, shell in next shell, ch 7, s c in 1st loop of pineapple, * ch 6, s c in next loop, repeat from * 5 times, ch 7, shell in next shell, repeat from ** all around ending to correspond, join.

26th Round. Sl st into shell, ch 4, shell in same space, * ch 2, shell in next shell, ch 8, s c in 1st loop of pineapple, then work 5-ch 6 loops across pineapple, ch 8, shell in next shell, repeat from * all around ending to correspond, join.

27th Round. Same as last round but having 4 loops across each pineapple and ch 4 between shells.

28th Round. Sl st into shell, ch 4, shell in same space, * ch 12, s c in 8th st from hook for picot, ch 4, shell in next shell, ch 8, s c in 1st loop of pineapple, work 3-ch 6 loops across pineapple, ch 8, shell in next shell, repeat from * all around ending to correspond, join.

29th Round. Sl st into shell, ch 4, shell in same space, * ch 4, 4 cluster sts with ch 2 between each cluster st in next picot, ch 4, shell in next shell, ch 8, s c in 1st loop of pineapple, work 2-ch 6 loops across pineapple, ch 8, shell in next shell, repeat from * all around ending to correspond, join.

30th Round. Sl st into shell, ch 4, shell in same space, ** ch 4, cluster st in next cluster st, * ch 2, tr c in next loop, ch 2, cluster st in next cluster st, repeat from * twice, ch 4, shell in next shell, ch 8, s c in 1st loop of pineapple, ch 6, s c in next loop, ch 8, shell in next shell, repeat from ** all around ending to correspond, join.

31st Round. Sl st into shell, ch 4, shell in same space, ** ch 4, cluster st in next cluster st, * ch 3, tr c in next tr c, ch 3, cluster st in next cluster st, repeat from * twice, ch 4, shell in next shell, ch 8, s c in remaining loop of pineapple, ch 8, shell in next shell, repeat from ** all around ending to correspond, join.

32nd Round. Sl st into shell, ch 4, shell in same space, ** ch 4, cluster st in next cluster st, * ch 4, tr c in next tr c, ch 4, cluster st in next cluster st, repeat from * twice, ch 4, shell in next shell, ch 8, s c in next s c, ch 8, shell in next shell, repeat from ** all around ending to correspond, join.

33rd Round. Sl st into shell, ch 4, shell in same space, ** ch 5, cluster st in next cluster st, * ch 5, tr c in next tr c, ch 5, cluster st in next cluster st, repeat from * twice, ch 5, shell in next shell, ch 3, shell in next shell, repeat from ** all around ending to correspond, join.

(continuation from page 15)

34th Round. Start of 1st point, sl st to center of shell, * ch 7, cluster st in next cluster st, ch 4, tr c in next tr c, ch 4, 2 tr c cluster st in next cluster st (2 tr c cluster st: 2 tr c in same space keeping last loop of each tr c on hook, thread over and work off all loops at one time), ** ch 4, turn, 1 tr c in same space, ch 3, tr c in next tr c, ch 3, 3 tr c cluster st in next cluster st, ch 4, turn, 2 tr c cluster st in same space, ch 2, tr c in next tr c, ch 2, 2 tr c cluster st in next 2 tr c cluster st, ch 4, turn, 1 tr c in same space, 3 tr c cluster st in next cluster st, ch 1, turn, sl st in top of cluster st just made, ch 6, sl st in same space for picot (top of point), ch 4 and working down side of point, sl st in base of the 2 tr c cluster st, * ch 4, sl st in base of next cluster st, repeat from * twice.

2nd Point. Ch 4 (counts as part of 1st cluster st), cluster st in same space as last sl st, ch 4, tr c in next tr c, ch 4, 2 tr c cluster st in next cluster st, repeat from ** to end of 1st point.

3rd Point. Work same as 2nd point finishing the picot at top of point, then ch 4 and working down side of point, sl st in base of 2 tr c cluster st, ch 4, sl st in base of next cluster st, ch 4, sl st in base of next cluster st, tr c in base of next cluster st, ch 7, s c in center of next shell of 33rd round, ch 4, tr c in loop at top of pineapple, ch 6, sl st in top of tr c just made for picot, tr c in same space, ch 4, s c in center of next shell, repeat from 1st * of 34th round 15 times, cut thread.

4

Pillowcase with Motif Insert and Edge directions on page 6

## White Pillowcase Edging

Materials Required:
  AMERICAN THREAD COMPANY
  “GEM” CROCHET COTTON, Article 35, size 30
  or
  “STAR” CROCHET COTTON, Article 20, size 30
  1 ball White.
  Steel crochet hook No. 12.

Ch 18, d c in 8th st from hook, ch 2, skip 2 sts of ch, 2 d c in next st, ch 2, 2 d c in next st, ch 2, skip 2 sts of ch, d c in next st, ch 2, skip 2 sts of ch, d c in last st, ch 5, turn.

2nd Row. D c in next d c, ch 2, skip 1 mesh, 2 d c, ch 2, 2 d c (shell) in next loop, ch 2, skip 1 mesh, d c in next d c, ch 2, d c in 3rd st of end ch, ch 8, turn.

3rd Row. D c in 1st d c, ch 2, d c in next d c, ch 2, shell in shell, ch 2, d c in next d c, ch 2, d c in 3rd st of ch, ch 5, turn.

4th Row. D c in next d c, ch 2, shell in shell, ch 2, d c in next d c, ch 2, d c in next d c, 6 d c in the ch 8 loop, ch 4, 7 d c in same loop, ch 3, turn.

5th Row. 1 d c in each of the next 6 d c, 7 d c in the ch 4 loop, 1 d c in each of the next 7 d c, ch 2, d c in next d c, ch 2, shell in shell, ch 2, d c in next d c, ch 2, d c in 3rd st of ch, ch 5, turn.

6th Row. D c in next d c, ch 2, shell in shell, ch 2, d c in next d c, ch 2, d c in next d c, * ch 2, skip 1 d c of scallop, d c in next d c, repeat from * 4 times, ch 2, d c in same space, * ch 2, skip 1 d c, d c in next st, repeat from * 4 times, ch 1, turn.

7th Row. 2 s c in 1st mesh, ch 2, sl st in top of last s c for picot, s c in same mesh, * 2 s c in next mesh, ch 2, sl st in top of last s c for picot, s c in same mesh, repeat from * 9 times, sl st in next d c, ch 5, d c in next d c, ch 2, shell in shell, ch 2, d c in next d c, ch 2, d c in 3rd st of ch, ch 5, turn.

(continuation from page 6)

8th Row. D c in next d c, ch 2, shell in shell, ch 2, d c in next d c, ch 2, d c in 3rd st of ch, ch 8, turn. Repeat the 3rd, 4th, and 5th rows once.

12th Row. D c in next d c, ch 2, shell in shell, ch 2, d c in next d c, ch 2, d c in next d c, * ch 2, skip 1 d c, d c in next d c, repeat from * 4 times, ch 2, d c in same space, * ch 2, skip 1 d c, d c in next st, repeat from * 4 times, join in 3rd free picot from top of previous scallop, ch 1, turn.

13th Row. Same as 7th row. Repeat from 8th row until edge is long enough to fit around lower edge of pillowcase. Sew in position.

## Shaded Pink Edging

Materials Required:
  AMERICAN THREAD COMPANY
  “GEM” CROCHET COTTON, Article 35, Size 20
  1 ball Shaded Pinks or color desired or
  “STAR” CROCHET COTTON, Article 20, size 20
  2 balls Shaded Pinks or color desired
  Steel crochet hook No. 10.

Ch 14, join to form a ring, ch 6, 2 d c in next st of ring, 2 d c in next st, * ch 3, skip 1 st, 2 d c in each of the next 2 sts, repeat from * once, ch 7, turn.

2nd Row. Thread over hook, insert in next loop, pull loop through, thread over and work off 2 loops, thread over hook, insert in next d c, pull loop through, thread over and work off 2 loops, thread over and work off all loops at one time, * ch 3, d c in next d c, repeat from * once, ch 3, thread over hook, insert in next d c, pull loop through, thread over and work off 2 loops, thread over hook, insert in next loop, pull loop through, thread over and work off 2 loops, thread over and work off all loops at one time, ch 2, d c in end loop, ch 6, turn.

3rd Row. Skip the ch 2 loop, 4 d c in next loop, * ch 3, 4 d c in next loop, repeat from * once, ch 7, turn. Repeat the last 2 rows for desired length omitting ch 7 at end of last row of work and do not turn.

Next Row. Working across lower edge, s c in 1st ch 7 loop, s d c in same loop (s d c: thread over hook, insert in loop, pull loop through, thread over and work off all loops at one time), 2 d c in same loop, ch 3, sl st in last d c for picot, 3 d c in same loop, ch 3, sl st in last d c for picot, 1 d c, 1 s d c, 1 s c in same loop, * in next ch 7 loop work 1 s c, 1 s d c, 2 d c, ch 3 picot, 3 d c, ch 3 picot, 1 d c, 1 s d c, 1 s c, repeat from * across row, do not turn.

Next Row. Sl st to 1st loop at top of work, ch 1, 3 s c in same space, * 3 s c over next d c, 4 s c in next loop, repeat from * across row, cut thread. Sew edging to pillowcase.

5

## Luncheon Cloth

Materials Required:
  AMERICAN THREAD COMPANY
  “GEM” CROCHET COTTON, Article 35, size 30
  4 balls White
  2 balls Nile Green
  1 ball each Bright Red and Buttercup
  or
  “STAR” CROCHET COTTON, Article 20, size 30
  5 balls White
  3 balls Nile Green
  1 ball each Bright Red and Lt. Yellow
  Steel crochet hook No. 11 or No. 12.

Each motif measures about 5¼ inches.

25 motifs, 5 x 5 are required for a cloth measuring about 28 inches x 28 inches.

FLOWER: With Buttercup, ch 8, join to form a ring, ch 3 and work 23 d c in ring, join in 3rd st of ch, cut thread.

2nd Round. Attach Green in any d c, s c in same space, ch 3, s c in same space (picot), * 1 s c in each of the next 3 d c, ch 3, s c in same space with last s c, repeat from * 6 times, ending with 1 s c in each of the last 2 d c, join, cut thread.

3rd Round. Attach Red in center of space between picots, ch 11, d c between next 2 picots, * ch 8, d c between next 2 picots, repeat from * 5 times, ending with ch 8, sl st in 3rd st of ch.

4th Round. In next loop work 1 s c, 1 s d c (s d c: thread over hook, insert in st, pull through, thread over and work off all loops at one time), 8 d c, 1 s d c, 1 s c, in next loop work 1 s c, 1 s d c, 4 d c, ch 3, sl st in top of last d c for picot, 4 d c, 1 s d c, 1 s c, repeat from beginning all around, join, cut thread.

(continuation from page 7)

LEAF: With Green, ch 15, s c in 5th st from hook, 1 s c in each of the next 9 sts of ch, 2 s c, ch 2, 2 s c in end ch, working on other side of ch, 1 s c in each of the next 10 sts, * ch 5, turn, skip 2 s c, working in back loop of sts only throughout, 1 s c in each of the next 10 s c, 2 s c, ch 2, 2 s c in ch 2 loop, 1 s c in each of the next 10 s c, repeat from * 6 times, ch 5, turn, skip 2 s c, 1 s c in each of the next 10 s c, 2 s c in ch 2 loop of leaf, ch 1, sl st in ch 3 loop of flower, ch 1, 2 s c in same space of leaf, 1 s c in each of the next 10 s c, sl st in next st, cut thread. Work 3 more leaves and join in same manner to flower as first leaf, skipping 1 petal of flower between leaves.

1ST ROUND OF OUTER EDGE OF MOTIF: With right side of work toward you, attach White in 6th s c on right hand side at bottom of leaf and working around leaf, ch 9, d c in ch 5 loop, ** ch 6, d c in next ch 5 loop, * ch 6, d c in next ch 5 loop, repeat from * twice, ch 6, d c in same loop, * ch 6, d c in next ch 5 loop, repeat from * 3 times, ch 6, skip 5 s c of same leaf, d c in next s c, ch 6, d c in center of flower petal, ch 6, and working up side of next leaf, d c in 6th s c, ch 6, d c in next ch 5 loop, repeat from ** twice, * ch 6, d c in next ch 5 loop, repeat from * 3 times, ch 6, d c in same space, ch 6, d c in next ch 5 loop, repeat from * 3 times, ch 6, skip 5 s c of same leaf, d c in next s c, ch 6, d c in center of petal of flower, ch 6, join in 3rd st of ch.

2nd Round. Sl st into loop, ch 3, d c in same loop, ch 3, 2 d c in same loop, * ch 3, 2 d c, ch 3, 2 d c (shell) in next loop, repeat from * 9 times, ch 3, s c in next loop, s c in next loop, ch 3, shell in next loop, repeat from 1st * all around ending to correspond, join.

3rd Round. Sl st into shell, ch 3, 1 d c, ch 3, 2 d c in same shell, ** ch 3, shell in next shell, * ch 3, shell in next shell, repeat from * twice, ch 5, shell in next shell, ch 5, shell in next shell, * ch 3, shell in next shell, repeat from * 3 times, ch 3, shell in next shell of next leaf, repeat from ** all around ending to correspond, ch 3, join.

4th Round. Sl st into shell, ch 6, sl st in 4th st from hook for picot, d c in same shell, ch 3, sl st in top of d c just made for picot, d c in same shell, ch 3, sl st in top of last d c made for picot, d c in same shell (picot shell), * ch 3, s c in next loop, ch 3, work a picot shell in next shell, repeat from * 9 times, ch 3, s c in next loop, ch 3, d c in first shell of next leaf, picot, d c in same shell, ch 1, join to center picot of last picot shell made, ch 1, slip st in top of last d c made to complete picot, d c in same shell, picot, d c in same shell, repeat from 1st all around ending to correspond and joining center picot of last picot shell to center picot of 1st picot shell, cut thread.

Work another motif in same manner, joining it to 1st motif in last row as follows: sl st into shell, work picot shell in same space, * ch 3, s c in next loop, ch 3, picot shell in next shell, repeat from * 4 times, * ch 3, s c in next loop, ch 3, 1 d c, picot, 1 d c in next shell, ch 1, join to corresponding picot of 1st motif, ch 1, complete picot, 1 d c, picot, 1 d c in same shell of 2nd motif, repeat from * once, * ch 3, s c in next loop, ch 3, picot shell in next shell, repeat from * twice, ch 3, s c in next loop, ch 3, 1 d c, picot, 1 d c in next shell, ch 1, join to center picot of last picot shell, ch 1, complete picot, 1 d c, picot, 1 d c in same shell, * ch 3, s c in next loop, ch 3, picot shell in next shell, repeat from * once, * ch 3, s c in next loop, ch 3, 1 d c, picot, 1 d c in next shell, ch 1, join to corresponding picot of 1st motif, ch 1, complete picot, 1 d c, picot, 1 d c in same shell of 2nd motif, repeat from * once, finish motif same as 1st motif.

Join 3rd motif to 2nd motif and 4th motif to 3rd and 1st motifs in same manner.

JOINING MOTIF FOR SMALL OPENING: 1st Round—With Buttercup, ch 5, join to form a ring, ch 3 and work 15 d c in ring, join, cut thread. Attach Red, * ch 6, skip 3 d c, s c in next d c, repeat from * 3 times.

Next Round. Work 1 s c, 1 s d c, 5 d c in next loop, ch 1, join to center picot of free picot shell, ch 1, sl st in top of last d c of small motif, 5 d c, 1 s d c, 1 s c in same loop of small motif, * 1 s c, 1 s d c, 5 d c in next loop, ch 1, join to center picot of free picot shell of next motif, ch 1, sl st in same d c of small motif, 5 d c, 1 s d c, 1 s c in same loop of small motif, repeat from * twice, join, cut thread.

DAISY JOINING MOTIF: With Buttercup, work 1st round same as for motif for small opening, join, cut thread.

Next Round. Attach White in any d c, * ch 9, sl st in center picot of free picot shell, working on ch work 1 s c in next st, 1 s d c in next st, 1 d c in each of the next 2 sts, 1 tr c in next st, 1 d c in each of the next 2 sts, 1 s d c in next st, 1 s c in next st, 1 s c in each of the next 2 d c of Buttercup center, repeat from * 7 times, join, cut thread. Work 21 more large motifs, 15 small joining motifs and 38 daisy motifs, joining all in same manner.

EDGE: Attach White in joining of the 2 motifs to the right hand side before corner, ch 11, ** s c in center picot of next picot shell, * ch 7, s c in center picot of next picot shell, repeat from * 3 times, ch 7, 1 tr c in joining picot of the 2 picot shells, * ch 7, s c in center picot of next picot shell, repeat from * twice, * ch 9, s c in center picot of next picot shell, repeat from * 3 times, ch 7, s c in center picot of next picot shell, ch 7, s c in center picot of next picot shell, ** ch 7, tr c in joining picot of the 2 picot shells, * ch 7, s c in center picot of next picot shell, repeat from * 4 times, ch 7, tr c in joining picot between motifs, * ch 7, s c in center picot of next picot shell, repeat from * 4 times, repeat from last ** twice, ch 7, tr c in joining picot of 2 picot shells, * ch 7, s c in center picot of next picot shell, repeat from * 4 times, ch 7, tr c in joining picot between motifs, ch 7, repeat from 1st ** all around ending to correspond and joining in 4th st of ch.

2nd Round. Sl st into 2nd st of ch, ch 5, skip 1 st of ch, d c in next st, * ch 2, skip next st, d c in next st, repeat from * 19 times, ch 2, thread over hook, skip 1 st, insert hook in next st, pull through and work off 2 loops, thread over hook, skip tr c and next st of ch, insert in next st, pull through, work off 2 loops, thread over and work off all loops at one time (a 2 d c cluster), * ch 2, skip next st, d c in next st, repeat from * 40 times, ch 2, work a 2 d c cluster over next tr c inserting hook in 2nd st on either side of tr c, * ch 2, skip 1 st, d c in next st, repeat from * 20 times, ch 2, work a 2 d c cluster over next tr c inserting hook in 2nd st on either side of tr c, continue all around in same manner, joining last d c in 3rd st of ch 5.

3rd Round. Sl st to 2nd mesh, ch 3, 2 d c in same space, keeping last loop of each d c on hook, thread over and work off all loops at one time, ch 3, sl st in top of cluster st for picot, ch 3, cluster st in same mesh (cluster st: 3 d c in same space, keeping last loop of each d c on hook, thread over and work off all loops at one time), ch 3, sl st in top of cluster st for picot, ch 3, skip 1 mesh, s c in next mesh, * ch 3, skip one mesh, 3 d c cluster st in next mesh, picot, ch 3, 3 d c cluster st in same mesh, picot, ch 3, skip 1 mesh, s c in next mesh, repeat from * all around, join in 3rd st of ch, cut thread.

## Chair Back Set

Materials Required:
  AMERICAN THREAD COMPANY
  The Famous “PURITAN” CROCHET COTTON, Article 40
  or
  “DE LUXE” Quality CROCHET COTTON, Article 346
  3 balls White.
  Steel crochet hook No. 7.

Chair back measures 16¼ inches x 11¼ inches.

Arm rests measure 7 inches x 11¼ inches.

CHAIR BACK: Ch 172, tr c in 5th st from hook, * ch 2, skip 2 sts of ch, 1 tr c in each of the next 7 sts, ch 2, skip 2 sts, 1 tr c in each of the next 2 sts, ch 4, 2 d c in 4th st from hook keeping last loop of each st on hook, thread over and pull through all loops at one time (rice st), ch 5, rice st in 4th st from hook, skip 7 sts of ch, 1 tr c in each of the next 2 sts, repeat from * 6 times, ch 2, skip 2 sts, 1 tr c in each of the next 7 sts, ch 2, skip 2 sts, 1 tr c in each of the last 2 sts, turn.

2nd Row. Ch 4 (counts as 1st tr c), tr c in next tr c, * ch 2, skip 1 mesh, 1 tr c in each of the next 7 tr c, ch 2, skip 1 mesh, 1 tr c in each of the next 2 tr c, ch 4, rice st in 4th st from hook, sl st in ch 1 between the next 2 rice sts, ch 4, rice st in 4th st from hook, 1 tr c in each of the next 2 tr c, repeat from * 6 times, ch 2, skip 1 mesh, 1 tr c in each of the next 7 tr c, ch 2, skip 1 mesh, 1 tr c in each of the last 2 sts, turn.

3rd Row. Ch 4, tr c in next tr c, * ch 2, skip 1 mesh, 1 tr c in each of the next 7 tr c, ch 2, skip 1 mesh, 1 tr c in each of the next 2 tr c, ch 4, rice st in 4th st from hook, ch 5, rice st in 4th st from hook, 1 tr c in each of the next 2 tr c, repeat from * 6 times, ch 2, skip 1 mesh, 1 tr c in each of the next 7 tr c, ch 2, skip 1 mesh, 1 tr c in each of the last 2 sts, turn. Repeat the last 2 rows 15 times.

(continuation from page 15)

Next Row. Ch 4, tr c in next tr c, ch 3, sl st in top of last tr c for picot, ch 2, tr c in next tr c, ch 3, sl st in top of last tr c for picot, 1 tr c in each of the next 3 tr c, ch 3 picot, 1 tr c in each of the next 3 tr c, ch 3 picot, * ch 2, tr c in next tr c, ch 3 picot, tr c in next tr c, ch 4, rice st in 4th st from hook, sl st in ch 1 between next 2 rice sts, ch 4, rice st in 4th st from hook, tr c in next tr c, tr c in next tr c, ch 3 picot, ch 2, tr c in next tr c, ch 3 picot, 1 tr c in each of the next 3 tr c, ch 3 picot, 1 tr c in each of the next 3 tr c, ch 3 picot, repeat from * across row ending with ch 2, tr c in next tr c, ch 3 picot, tr c in next st, cut thread. Work a row of s c across top of work.

ARM RESTS: Ch 84 and work in same manner as chair back.

6

## Pillowcase with Motif Insert and Edge

(pictured on page 4)

Materials Required:
  AMERICAN THREAD COMPANY
  “GEM” CROCHET COTTON, Article 35, size 30 or
  “STAR” CROCHET COTTON, Article 20, size 30
  2 balls White.
  1 ball Lt. Yellow or Buttercup.
  Steel crochet hook No. 12.

MOTIF: With Lt. Yellow ch 9, join to form a ring, ch 3, 2 d c in same space keeping last loop of each d c on hook, thread over and work off all loops at one time, * ch 3, cluster st in ring, (cluster st: 3 d c in same space keeping last loop of each d c on hook, thread over and work off all loops at one time), repeat from * 6 times, ch 3, join in 1st cluster st.

2nd Row. Ch 1, * 2 s c in next loop, ch 3, 2 s c in same loop, repeat from * all around, join in 1st s c, cut Yellow.

3rd Row. Attach White in ch 3 loop, ch 3, 2 d c in same space, * ch 4, 2 d c, ch 3, 2 d c (shell) in next ch 3 loop, ch 4, 3 d c in next loop, repeat from * all around ending with ch 4, 2 d c, ch 3, 2 d c in next loop, ch 4, join.

4th Row. Ch 3, d c in same space, ** 1 d c in next d c, 2 d c in next d c, ch 4, 2 tr c in next shell keeping last loop of each tr c on hook, thread over and work off all loops at one time (2 tr c cluster st), ch 3, 2 tr c cluster st in same space, repeat from * twice, ch 4, 2 d c in next d c, repeat from ** all around ending to correspond, ch 4, join.

5th Row. Sl st to next d c, ch 3, 1 d c in each of the next 2 d c keeping last loop of each d c on hook, thread over and work off all loops at one time, ** ch 3, sl st in top of cluster st just made for picot, ch 5, skip 1 loop, 2 tr c cluster st in next loop, ch 4, sl st in 3rd st from hook for picot, ch 1, 2 tr c cluster st in same loop, ch 4, sl st in 3rd st from hook for picot, ch 1 (picot loop), 2 tr c cluster st in next loop, * ch 4, sl st in 3rd st from hook for picot, ch 1, 2 tr c cluster st in same loop, repeat from * once, ch 4, sl st in 3rd st from hook for picot, ch 1, 2 tr c cluster st in next loop, ch 4, sl st in 3rd st from hook for picot, ch 1, 2 tr c cluster st in same loop, ch 5, skip 1 d c, 3 d c cluster st over next 3 d c, repeat from ** all around ending to correspond, ch 5, join, cut thread.

Work a 2nd motif joining it to 1st motif in last row as follows: sl st to next d c, ch 3, 1 d c in each of the next 2 d c keeping last loop of each d c on hook, thread over and work off all loops at one time, picot, ch 5, skip 1 loop, 2 tr c cluster st in next loop, picot loop, 2 tr c cluster st in same space, picot loop, 2 tr c cluster st in next loop, * picot loop, 2 tr c cluster st in same space, repeat from * once, ch 3, join to corresponding picot of 1st motif, ch 1, sl st in 2nd st of ch to complete picot, ch 1, 2 tr c cluster st in next loop of 2nd motif, ch 3, join to next picot of 1st motif, ch 1, complete picot, ch 1, 2 tr c cluster st in same space of 2nd motif, ch 5, skip 1 d c, 3 d c cluster st over next 3 d c, picot, ch 5, skip 1 loop of 2nd motif, 2 tr c cluster st in next loop, ch 3, join to corresponding picot on same side of 1st motif, ch 1, complete picot, ch 1, 2 tr c in same space of 2nd motif, ch 3, join to next picot of 1st motif, ch 1, complete picot, ch 1, 2 tr c cluster st in next loop of 2nd motif, finish motif same as 1st motif. Join all motifs in same manner having 3 motifs in 1st row, 2 motifs in 2nd row and 1 motif in 3rd row.

EDGE: Having scallops facing downward, attach Yellow in picot over the 3 d c cluster st to right hand side of corner of top motif, ch 4, s c in same picot, * ch 4, d c in 4th st from hook (rice st), 2 s c in next picot of same motif, repeat from * 6 times, ** ch 4, s c in same space, * rice st, 2 s c in next picot of same motif, repeat from * 3 times, rice st, 2 s c in 1st free picot of next motif, * rice st, 2 s c in next picot, repeat from * 3 times, repeat from ** once, ch 4, s c in same space, * rice st, 2 s c in next picot, repeat from * 6 times, ** ch 4, 2 s c in same space, * rice st, 2 s c in next picot, repeat from * 6 times, ch 4, 2 s c in same space, * rice st, 2 s c in next picot, repeat from * 3 times, rice st, skip 1 picot at corner of next motif, s c in the tr c cluster st between picots, rice st, 2 s c in 1st free picot of next motif, * rice st, 2 s c in next picot, repeat from * 3 times, repeat from last ** once, ch 4, s c in same space, * rice st, 2 s c in next picot, repeat from * 6 times, ch 4, s c in same space, * rice st, 2 s c in next picot, repeat from * 6 times, finish side to correspond, cut thread.

SMALL JOINING MOTIF FOR CENTER: With Yellow work 1st row same as 1st row of motif.

2nd Row: Ch 1, 2 s c in next loop, ch 1, join to free picot of motif, ch 1, 2 s c in same space of small motif, * 2 s c in next loop, ch 1, join to next picot of same motif, ch 1, 2 s c in same space of small motif, 2 s c in next loop, ch 1, join to 1st free picot of next motif, ch 1, 2 s c in same space of small motif, repeat from * until all picots are joined, cut thread. Applique crocheted insert to front of pillowcase as illustrated, having the scallops to lower edge. Cut away material from underneath motifs leaving 1/8 inch to turn under and overcast.

EDGE: Attach White in 1st hemstitched space next to motif and work a row of s c around lower edge to opposite side, cut thread.

Next Row. Attach White in 1st s c at opposite side of insert, ch 3, d c in same space, * ch 4, sl st in 3rd st from hook for picot, ch 1, skip 3 s c, 2 d c cluster st in next s c, repeat from * to opposite side of insert, cut thread.

Next Row. Attach Yellow in motif next to 1 d c cluster st, sl st in 1st picot of edge, * ch 3, d c in 3rd st from hook, sl st in next picot, repeat from * to opposite side, join in side of motif, cut thread. Work another pillowcase in same manner.

8

## Hot Plate Mats or Covers

Materials Required:
  AMERICAN THREAD COMPANY
  The Famous “PURITAN” CROCHET COTTON, Article 40 or
  “DE LUXE” Quality CROCHET COTTON, Article 346
  2 balls Shaded Yellows or color desired and
  1 ball each Kelly Green and White will make the small mat or cover.
  1 additional ball Shaded Yellows is needed to make both mats.
  Steel crochet hook No. 6 or No. 7.

### SMALL MAT OR COVER

The following directions are for a 7x12 inch oval.

With Shaded Yellows ch 5, join to form a ring, ch 5, d c in ring, * ch 2, d c in ring, repeat from * 5 times, ch 2, join in 3rd st of ch.

2nd Round. Over each loop work 1 s c, 5 d c, 1 s c, join.

3rd Round. * Ch 5, sl st in back of work between next 2 petals, repeat from * 7 times.

4th Round. Over each loop work 1 s c, 7 d c, 1 s c, join.

5th Round. * Ch 6, sl st in back of work between next 2 petals, repeat from * all around, cut thread.

6th Round. Attach Green and work 1 s c, 1 d c, 7 tr c, 1 d c, 1 s c over each loop, join, cut thread.

2nd FLOWER: Work 1st 5 rounds same as 1st flower.

Next Round. Attach Green and work 1 s c, 1 d c, 4 tr c in same loop, join to center st of any Green petal of 1st flower (to join: slip loop off hook, insert in center st of petal of 1st flower, pick up loop and pull through), 3 tr c, 1 d c, 1 s c in same space of 2nd flower, 1 s c, 1 d c, 4 tr c in next loop of 2nd flower, join to center st of next petal of 1st flower, 3 tr c, 1 d c, 1 s c in same space of 2nd flower, finish round same as 1st flower. Work 3rd flower in same manner, joining to 2 center petals of 2nd flower leaving 2 petals free at top and lower edge between joinings, cut thread.

Attach White between the 3rd and 4th free petal of end flower, ch 7, * s c in 2nd tr c of next petal, ch 5, skip 3 tr c, s c in next tr c, ch 3, tr c between petals, ch 3, repeat from * once, s c in 2nd tr c of next petal, ch 5, skip 3 tr c, s c in next tr c, ch 3, tr c between next 2 petals keeping last loop of tr c on hook, tr c in joining keeping last loop of tr c on hook, tr c between next 2 petals of next flower, keeping last loop of tr c on hook, thread over and work off all loops at one time (a tr c cluster), ch 3, s c in 2nd tr c of next petal, ch 5, skip 3 tr c, s c in next tr c, ch 3, tr c between petals, ch 3, s c in 2nd tr c of next petal, ch 5, skip 3 tr c, s c in next tr c, ch 3, work a tr c cluster between flowers, * ch 3, s c in 2nd tr c of next petal, ch 5, skip 3 tr c, s c in next tr c, ch 3, tr c between petals, repeat from * 4 times, ch 3, s c in 2nd tr c of next petal, ch 5, skip 3 tr c, s c in next tr c, ch 3, tr c cluster between flowers, finish round to correspond joining last ch 3 in 4th st of ch.

2nd Round. Sl st into loop, ch 6, d c in same space, * ch 1, 1 d c, ch 3, 1 d c (shell) in next loop, repeat from * 6 times, ch 1, 1 tr c, ch 3, 1 tr c in tr c cluster, skip the ch 3 loop, * ch 1, shell in next loop, repeat from * 3 times, ch 1, 1 tr c, ch 3, 1 tr c in next tr c cluster, skip the ch 3 loop, * ch 1, shell in next loop, repeat from * 15 times, ch 1, 1 tr c, ch 3, 1 tr c in next tr c cluster, skip the ch 3 loop, * ch 1, shell in next loop, repeat from * 3 times, ch 1, 1 tr c, ch 3, 1 tr c in next tr c cluster, skip the ch 3 loop, * ch 1, shell in next loop, repeat from * 7 times, ch 1, join in 3rd st of ch.

3rd Round. Sl st into shell, ch 3, 1 d c, ch 2, 2 d c in same space, * 2 d c, ch 2, 2 d c (shell) in next shell, repeat from * all around, join.

4th Round. Sl st to center of shell, * ch 7, s c in center of next shell, repeat from * all around, cut White.

5th Round. Attach Shaded Yellows in any loop, ch 3, 5 d c, ch 3, 6 d c over same loop, * 6 d c, ch 3, 6 d c over next loop, repeat from * all around, join.

(continuation from page 10)

6th Round. Ch 3, 1 d c in each d c and 2 d c, ch 3, 2 d c in each ch 3 loop, join.

7th Round. Ch 4, 1 tr c in each d c and 2 tr c, ch 3, 2 tr c in each ch 3 loop, join, cut thread.

8th Round. Attach White in ch 3 loop, ch 3, 1 d c, ch 2, 2 d c in same space, * ch 1, 2 d c, ch 2, 2 d c (shell) in next ch 3 loop, repeat from * all around, ch 1, join.

9th Round. Sl st to center of shell, ch 3, 2 d c, ch 2, 3 d c in same space, * ch 1, 3 d c, ch 2, 3 d c (shell) in center of next shell, repeat from * all around, ch 1, join, cut thread.

10th Round. Attach Green in center of shell, ch 3, 2 d c, ch 2, 3 d c in same space, ch 1, s c in the ch 1 between shells, * ch 1, 3 d c, ch 2, 3 d c in center of next shell, ch 1, s c in the ch 1 between shells, repeat from * all around, ch 1, join, cut thread.

11th Round. Attach Shaded Yellows in any s c, * ch 1, 1 s c in each of the next 3 d c of next shell, 1 s c, ch 3, 1 s c in center of same shell, 1 s c in each of the next 3 d c of same shell, ch 1, s c in next s c, repeat from * all around, join, cut thread.

CASING: With wrong side of work toward you, attach White between shells of 9th round, * ch 7, s c in the ch 1 between next 2 shells, repeat from * all around.

Next Round. Sl st to center of loop, * ch 7, s c in next loop, repeat from * all around.

Next Round. Same as last round but having 5 chs in each loop, cut thread.

### LARGE MAT OR COVER

The following directions are for a 10 x 15½ inch oval.

Work flowers for center same as small mat but working 4 flowers instead of 3 and joining in same manner.

Attach White and work in same manner as 1st round of small mat working over 3rd flower same as over 2nd flower and working a tr c cluster between 3rd and 4th flowers.

2nd Round. Same as 2nd round of small mat but working shells across 3rd flower same as across 2nd flower and working 1 tr c, ch 3, 1 tr c in the tr c cluster between the 3rd and 4th flowers.

3rd Round. Same as 3rd round of small mat.

4th & 5th Rounds. Sl st to center of shell, ch 3, 1 d c, ch 2, 2 d c in same space, * 2 d c, ch 2, 2 d c (shell) in center of next shell, repeat from * all around, join.

Repeat the 4th, 5th, 6th, 7th, 8th and 9th rounds of small mat.

12th Round. Same as last round, cut White.

Next Round. Attach Green and work same as 10th round of small mat.

Next Round. Attach Shaded Yellows and work same as 11th round of small mat.

CASING: Work same as for small cover attaching thread in 10th round, but having 3 rounds of 7 ch loops instead of 2 rounds.

9

Napkin Holder Cover directions on page 10

## Large Doily

Materials Required:
  AMERICAN THREAD COMPANY
  The Famous “PURITAN” CROCHET COTTON, Article 40 or
  “DE LUXE” Quality CROCHET COTTON, Article 346
  3 balls Shaded Yellows.
  2 balls Kelly Green.
  2 balls White.
  Steel crochet hook No. 6 or No. 7.

CENTER: Work 1st 6 rounds same as Hot Plate Mat cover on page 8.

7th Round. Attach White in 2nd tr c of Green petal, ch 5, skip 3 tr c, s c in next tr c. * ch 3, tr c between petals, ch 3, s c in 2nd tr c of next Green petal, ch 5, skip 3 tr c, s c in next tr c, repeat from * all around ending with ch 3, tr c between petals, ch 3, join.

8th Round. Sl st into loop, ch 6, d c in same loop, * 1 d c, ch 3, 1 d c in next loop, repeat from * all around, join in 3rd st of ch.

9th Round. Sl st into loop, * ch 6, s c in next loop, repeat from * all around, cut thread.

10th Round. Attach Shaded Yellows in loop, ch 3, 4 d c in same loop, ch 3, 5 d c in same loop, * 5 d c, ch 3, 5 d c in next loop, repeat from * all around, join.

11th Round. Ch 3, work 1 d c in each d c and 2 d c, ch 3, 2 d c in each ch 3 loop, join, cut thread.

12th Round. Attach White in ch 3 at point, s c in same space, * ch 7, s c in ch 3 of next point, repeat from * all around, ch 7, join.

13th Round. * Ch 6, s c in next loop, ch 6, s c in next s c, repeat from * all around ending with ch 3, d c in same space as beginning (this brings thread in position for next round).

14th Round. * Ch 6, s c in next loop, repeat from * all around ending with ch 3, d c in d c. Repeat the 14th round twice.

17th Round. * Ch 7, s c in next loop, repeat from * all around ending with ch 7, s c in d c, cut thread.

Next 5 Rounds. Repeat 10th, 11th, 12th, 13th, and 14th rounds.

23rd & 24th Rounds. Same as last round but ending 24th round with ch 6, s c in d c, cut thread.

25th Round. Attach Green in loop, * ch 5, s c in next loop, ch 7, sl st in top of s c just made for picot, ch 7, sl st in same space, ch 7, sl st in same space (3 picot cluster), ch 5, s c in next loop, repeat from * all around ending to correspond, cut Green.

26th Round. Attach Shaded Yellows in any s c, * ch 4, sl st in 1st loop of next 3 picot cluster, ch 3, sl st in next loop of same 3 picot cluster, ch 3, sl st in same loop (picot loop), ch 3, sl st in next loop of same picot cluster, ch 4, sl st in next s c, repeat from * all around, join, cut thread.

MOTIFS AROUND CENTER: Work 1st 16 rounds same as center but ending last round with ch 6, s c in d c, cut thread.

17th Round. Attach Green and work same as 25th round of center.

18th Round. Attach Shaded Yellows in any s c, ch 4, sl st in 1st loop of next 3 picot cluster, ch 3, sl st in next loop of same 3 picot cluster, ch 1, join to picot loop of any scallop of center, ch 1, sl st in same space on motif, ch 3, sl st in next loop of same 3 picot cluster, ch 4, sl st in next s c on motif, * ch 4, sl st in 1st loop of next 3 picot cluster, ch 3, sl st in next loop of same picot cluster, ch 1, join to picot loop in middle of next scallop on center, ch 1, sl st in same space on motif, ch 3, sl st in next loop of same picot cluster, ch 4, sl st in next s c on motif, repeat from * once, * ch 4, sl st in 1st loop of next 3 picot cluster, ch 3, sl st in next loop of same 3 picot cluster, ch 3, sl st in same space, ch 3, sl st in next loop of same 3 picot cluster, ch 4, sl st in 10 next s c, repeat from * all around, cut thread. Work a 2nd motif in same manner and having large center to top of work, join center of 2 scallops to center of 2 scallops on left hand side of 1st motif leaving 2 scallops free at inside edge of 1st motif, then work 2 more scallops on 2nd motif, leave 3 scallops free on center, join next 3 scallops of motif to next 3 scallops of center joining same as 1st motif was joined. Work 6 more motifs and join in same manner always leaving 3 scallops free on center between joinings and 2 scallops free on inside edge of each motif. Join last motif to 1st motif to correspond.

SMALL JOINING MOTIF: With Green ch 6, join to form a ring, ch 3 and work 14 d c in ring, join in 3rd st of ch, cut thread.

Attach Shaded Yellows in same space, s c in same space, * ch 5, sl st in top of s c for picot, ch 3, join to picot loop at center of 1st free scallop of motif, ch 3, sl st in same space of small motif, ch 5, sl st in same space, 1 s c in each of the next 3 d c, ch 5, sl st in top of last s c for picot, ch 3, join to picot loop at center of next free scallop of same motif, ch 3, sl st in same space of small motif, ch 5, sl st in same space, 1 s c in each of the next 3 d c, repeat from * once but joining to center picot loop of 2 free scallops of next motif, ch 5, sl st in top of last s c for picot, ch 3, skip 1 scallop of center, join to picot loop at center of next scallop, ch 3, sl st in same space on small motif, ch 5, sl st in same space, 1 s c in each of the next 2 d c, join in 1st s c, cut thread. Work a joining motif in each of the next 7 spaces around center.

## Napkin Holder Cover

(pictured on pg. 9)

Materials Required:
  AMERICAN THREAD COMPANY
  The Famous “PURITAN” CROCHET COTTON, Article 40 or
  “DE LUXE” Quality CROCHET COTTON, Article 346
  1 ball each White, Shaded Yellows and Kelly Green.
  Steel crochet hook No. 6 or No. 7.
  1 Napkin Holder 5 inches in diameter.

Work 1st 11 rounds same as Large Doily on page 9.

12th Round. Attach White in ch 3 at point, ch 3, d c in same space, * ch 1, 2 d c, ch 2, 2 d c (shell) in next ch 3 loop, repeat from * all around, ch 1, join.

13th Round. Attach Green in center of shell, ch 3, 2 d c, ch 2, 3 d c in same space, ch 1, s c in ch 1 between shells, * ch 1, 3 d c, ch 2, 3 d c in center of next shell, ch 1, s c in ch 1 between shells, repeat from * all around, ch 1, join, cut thread.

14th Round. Attach Shaded Yellows in any s c, * ch 1, 1 s c in each of the next 3 d c of next shell, 1 s c, ch 3, 1 s c in center of shell, 1 s c in each of the next 3 d c of same shell, ch 1, s c in next s c, repeat from * all around, join, cut thread.

CASING: With wrong side of work toward you, attach White between shells of 12th round, * ch 7, s c in ch 1 between next 2 shells, repeat from * to within the last 6 shells, turn.

Next Row. Sl st to center of loop, * ch 7, s c in next loop, repeat from * to same space as opposite side, turn.

Next Row. Same as last row but having 5 chs in each loop, cut thread. Work another section in same manner.

11

## Notepaper and Pencil Case

Materials Required:
  AMERICAN THREAD COMPANY
  “STAR” BLEND YARN, Article 75
  2 skeins Red.
  1 skein White.
  Steel crochet hook No. 00.
  1 pencil
  1 pad 3 inches x 5 inches.

BACK SECTION: With Red ch 38, s c in 2nd st from hook, 1 s c in each remaining st of ch, ch 1 to turn all rows.

2nd Row. 1 s c in each s c. Repeat the last row 26 times, cut yarn.

TOP SECTION: Work 1st 10 rows same as back section.

11th Row. 1 s c in each of the 1st 28 s c, turn.

Next 14 Rows. 1 s c in each s c, cut yarn. With wrong side of 10th row toward you, attach yarn in 1st free st and work 1 s c in each s c.

Next 14 Rows. 1 s c in each s c.

Next Row. 1 s c in each s c, 1 s c in each of the 28 sts of opposite side, turn.

Next 2 Rows. 1 s c in each s c, cut yarn at end of last row.

PENCIL HOLDER: With Red ch 3, s c in 2nd st from hook, s c in next st of ch, ch 1, turn.

2nd Row. 2 s c in each s c, drop Red, turn.

3rd Row. Attach White, 2 s c in 1st s c, 1 s c in each of the next 2 s c, 2 s c in next s c, ch 1 to turn all rows.

4th Row. 1 s c in each s c, drop White. (When changing colors always complete last half of last st worked with next color.) Working even in s c work 2 rows Red, 2 rows White until there are 6 stripes of each color. Work 2 more rows in Red, cut yarn. Sew to upper section to the left of pad opening leaving last row free. Cut a piece of cardboard to fit upper section. Place between the 2 sections made and overcast the sections together.

FLAP: With Red ch 33, s c in 2nd st from hook, 1 s c in each remaining st of ch, ch 1 to turn all rows.

Next 19 Rows. 1 s c in each s c.

Next Row. 1 s c in each of the 1st 31 sts, 3 s c in next st, work 17 s c across the short edge working 3 s c in next corner st, work 31 s c up next long side working on opposite side of starting ch, cut yarn.

With right side of work toward you, attach White in 2nd st of long side, ch 3, 3 d c in same space, drop loop from hook, insert in 3rd st of ch, pull loop through, ch 1 to tighten st, * ch 1, skip 1 s c, popcorn st in next s c (popcorn st: 4 d c in same space, drop loop from hook, insert in 1st d c, pull loop through, ch 1 to tighten st), repeat from * 14 times, ch 1, popcorn st in next s c, ch 1, popcorn st in next s c, * ch 1, skip 1 s c, popcorn st in next s c, repeat from * 8 times, ch 1, popcorn st in next s c, ch 1, popcorn st in next s c, * ch 1, skip 1 s c, popcorn st in next s c, repeat from * 14 times, cut yarn.

Next Row. With right side of work toward you, attach White in 1st popcorn st, work a row of s c around the 3 sides working 1 s c in each st and 3 s c in center popcorn st at each corner, cut yarn. Sew plain side of flap to top of under section.

12

## Lantern Potholder

Materials Required:
  AMERICAN THREAD COMPANY
  The Famous “PURITAN” CROCHET COTTON, Article 40
  or
  “DE LUXE” Quality CROCHET COTTON, Article 346
  1 ball Shaded Nile Greens.
  1 ball Lt. Yellow or Buttercup.
  Steel crochet hook No. 7.

With Lt. Yellow ch 8, join to form a ring, ch 3 and work 19 d c in ring, join in 3rd st of ch.

2nd Round. Ch 3, d c in same space, * popcorn st in next d c (popcorn st: 5 d c in same st, drop loop from hook, insert in 1st d c, pick up loop and pull through, do not ch 1), 2 d c in next d c, repeat from * all around, ending with popcorn st in next st, join in 3rd st of ch, cut thread.

3rd Round. Attach Shaded Greens in same space, ch 3, d c in same space, * d c in next d c, d c in next popcorn st, d c in next d c, 2 d c in next d c, ch 2, 2 d c in next popcorn st, 1 d c in each of the next 2 d c, 1 d c in next popcorn st, 2 d c in next d c, ch 2, 2 d c in next d c, 1 d c in next popcorn st, 1 d c in each of the next 2 d c, 2 d c in next popcorn st, ch 2, 2 d c in next d c, repeat from * all around ending to correspond, ch 2, join.

4th Round. Ch 3, d c in same space, 1 d c in each of the next 5 d c, 2 d c in next d c, * ch 2, 2 d c in next d c, 1 d c in each of the next 5 d c, 2 d c in next d c, repeat from * all around, ch 2, join.

5th Round. Ch 3, d c in same space, ** popcorn st in next st, * d c in next st, popcorn st in next st, repeat from * twice, 2 d c in next d c, ch 2, 2 d c in next d c, repeat from ** all around ending to correspond, ch 2, join, cut thread.

6th Round. Attach Lt. Yellow in same space, ch 3, d c in same space, * d c in next d c, d c in next popcorn st, repeat from * 3 times, d c in next d c, 2 d c in next d c, ch 2, 2 d c in next d c, repeat from 1st * all around ending to correspond, ch 2, join, cut thread.

Work 7 more motifs in same manner.

(continuation from page 14)

TO JOIN MOTIFS: Place 2 motifs wrong sides together and working on right side, attach Lt. Yellow in ch 2 loop, inserting hook through both motifs, then working through back loop of sts only and through both motifs, work 1 sl st in each of the next 13 d c, 1 sl st in each of the next 2 sts of ch, 1 sl st in each of the next 13 d c, cut thread. Join 3rd motif to 2nd motif in same manner leaving 1 d c section free at top and lower edge of each motif. Join 3 more motifs together in same manner joining opposite side of 6th motif to side of 1st motif to form circle. Place a motif in top opening and crochet together with sl sts matching each d c section. Place last motif in position in lower opening and finish in same manner.

RING: With Lt. Yellow ch 23, sl st in 2nd st from hook, 1 sl st in each remaining st of ch, cut thread, leaving an end. Sew to holder as illustrated.

## Lampshade Cover

Materials Required:
  AMERICAN THREAD COMPANY
  “GEM” CROCHET COTTON, Article 35, Size 20 or Size 30
  2 balls White
  Steel crochet hook No. 7.
  Lampshade 4½ inches in diameter at top, 8½ inches in diameter at bottom, 6 inches in height. Shade cover is worked rather loosely.
  ¾ yd, ½ inch ribbon, ½ yd. round elastic.

* Ch 5, tr c in 5th st from hook, repeat from * 32 times. Work should measure about 15 inches, join being careful not to twist work.

2nd Round. Ch 12, tr c in same st where 1st tr c was made, * ch 8, tr c in st where next tr c was made, repeat from * 30 times, ch 8, join in 4th st of ch (33 meshes).

3rd Round. Ch 1, s c in next mesh, * ch 5, s c in same mesh, s c in next mesh, repeat from * all around ending with ch 5, s c in same mesh, join in 1st s c.

4th Round. Sl st to center of loop, * ch 5, s c in next loop, repeat from * all around.

5th Round. Sl st into 1st loop, ch 5, s c in same loop, * ch 2, skip 1 loop, 2 tr c with ch 2 between in next loop, ch 2, 2 d tr c (3 times over hook) with ch 2 between in same loop, ch 2, 2 tr c with ch 2 between in same loop (shell), ch 2, skip 1 loop, 1 s c, ch 5, 1 s c in next loop, repeat from * all around (there will be a ch 5 loop in 1st mesh and a ch 5 loop in last mesh in this round). Do not join. Place a marker at beginning of each round.

(continuation from page 14)

6th Round. Ch 2, shell in 1st ch 5 loop, ch 2, * 1 s c, ch 5, 1 s c in center of next shell, ch 2, shell in next ch 5 loop, repeat from * all around.

7th Round. Ch 2, 1 s c, ch 5, 1 s c in center of 1st shell, * ch 2, shell in next ch 5 loop, ch 2, 1 s c, ch 5, 1 s c in center of next shell, repeat from * all around. Repeat the last 2 rounds twice.

12th Round. Same as 6th round but having ch 3 before and after each shell.

13th Round. Same as 7th round but having ch 3 before and after each shell. Repeat the last 2 rounds once.

16th Round. * Ch 3, 2 tr c, 3 d tr c, 2 tr c with ch 2 between each st in next ch 5 loop, ch 3, 1 s c, ch 5, 1 s c in center of next shell, repeat from * all around ending with ch 3, 2 tr c, 3 d tr c, 2 tr c with ch 2 between each st in next ch 5 loop.

17th Round. * Ch 3, s c between 1st 2 d tr c of next shell, ch 5, s c in next loop of same shell, ch 3, 2 tr c, 3 d tr c, 2 tr c with ch 2 between each st in next ch 5 loop, repeat from * all around ending with ch 3, s c between 1st 2 d tr c of next shell, ch 5, s c in next loop of same shell.

18th Round. * Ch 3, 2 tr c, 3 d tr c, 2 tr c with ch 2 between each st in next ch 5 loop, ch 3, s c between 1st 2 d tr c of next shell, ch 5, s c in next loop of same shell, ch 5, repeat from * all around ending to correspond.

19th Round. Same as 17th round.

20th Round. Work in same manner as 18th round but having 3 tr c, 2 d tr c, 3 tr c with ch 2 between each st in each shell.

21st Round. * Ch 3, 1 s c, ch 5, 1 s c in center of next shell, ch 3, 3 tr c, 2 d tr c, 3 tr c with ch 2 between each st in next ch 5 loop, repeat from * all around ending to correspond.

22nd Round. * Ch 2, work a shell of 2 tr c, 2 d tr c, 2 tr c with ch 2 between each st in next ch 5 loop, ch 2, skip 1 loop of next shell, 1 s c, ch 5, 1 s c in next loop of same shell, Ch 2, skip 1 loop of same shell, work a shell of 2 tr c, 2 d tr c, 2 tr c with ch 2 between each st in next loop, ch 2, skip 1 loop of same shell, 1 s c, ch 5, 1 s c in next loop, repeat from * all around ending to correspond. All shells are worked in same manner for remainder of lampshade cover.

23rd Round. * Ch 2, 1 s c, ch 5, 1 s c in center of next shell, ch 2, shell in next ch 5 loop, repeat from * all around ending to correspond.

24th Round. * Ch 2, shell in next ch 5 loop, ch 2, 1 s c, ch 5, 1 s c in center of next shell, repeat from * all around ending to correspond. Repeat the last 2 rounds once.

27th Round. Same as 23rd round, cut thread.

LOWER RUFFLE: With right side of work toward you, attach thread in 1st loop of shell of 26th round leaving last round free and working on the 26th round, * ch 5, s c in next loop of same shell, repeat from * 3 times, ch 5, s c in next ch 2 loop, ch 5, s c in center loop of next shell of previous round (same space where the ch 5 loop of 26th round was made), ch 5, s c in next ch 2 loop, ch 5, s c in 1st loop of next shell, repeat from * all around.

2nd Round. Sl st into loop, ch 3, 2 d c in same space, * ch 4, 3 d c in next loop, repeat from * all around, ch 4, join.

3rd Round. Sl st into 1st loop, ch 5, tr c in same loop, * ch 1, tr c in same loop, repeat from * 3 times, * ch 3, 6 tr c with ch 1 between each tr c in next loop, repeat from * all around, ch 3, join in 4th st of ch.

4th Round. Ch 1, s c in same space, ** ch 3, sl st in top of s c for picot, * s c in next ch 1 space, s c in next tr c, ch 3, sl st in top of s c for picot, repeat from * 4 times, 2 s c in next loop, ch 3, sl st in top of last s c for picot, s c in same loop, s c in next tr c, repeat from ** all around ending to correspond, cut thread.

TOP RUFFLE: Holding 1st round toward you, attach thread in any loop of 2nd round, ch 3, 2 d c, ch 3, 3 d c in same loop, * ch 3, 3 d c, ch 3, 3 d c in next loop of 2nd round, repeat from * all around, ch 3, join.

2nd Round. Same as 3rd round of lower ruffle.

3rd Round. Ch 5, ** tr c in next loop of same shell, ch 1, tr c in next loop of same shell, * ch 1, tr c in next tr c of same shell, ch 1, tr c in next loop of same shell, repeat from * once, ch 1, tr c in next loop of same shell, ch 1, tr c in next tr c of same shell, ch 3, tr c in 1st tr c of next shell, ch 1, repeat from ** all around ending to correspond, join in 4th st of ch.

4th Round. Same as 4th round of lower ruffle but repeating from * 7 times instead of 4 times. Starch lightly. Lace ribbon through beading at top. Lace elastic through center of shells of last round. This round fits to inside of shade.

13

## Baby Booties Pin Cushion

Materials Required:
  AMERICAN THREAD COMPANY
  The Famous “PURITAN” CROCHET COTTON, Article 40
  or
  “DE LUXE” Quality CROCHET COTTON, Article 346
  1 ball Lt. Blue or color desired.
  Steel crochet hook No. 6 or No. 7.
  3 yds. narrow White Ribbon.
  ⅛ yd. White Satin.

FRONT SECTION: Starting at center front, ch 13, 2 s c in 2nd st from hook, 1 s c in each of the next 10 sts of ch, 2 s c in last st, ch 3, turn.

2nd Row. Working in back loop of sts only, 2 d c in 1st s c, 1 d c in each of the next 12 s c, 3 d c in last s c, ch 1, turn.

3rd Row. Working in both loops of sts, 2 s c in 1st d c, 2 s c in next d c, 1 s c in each of the next 14 d c, 2 s c in next d c, 2 s c in 3rd st of ch, turn.

4th Row. Ch 3, working in back loop of sts only, work in d c increasing 1 d c at the beginning and end of row, ch 1, turn.

5th Row. Working in both loops of sts, work in s c increasing 1 s c at the beginning and end of row. Repeat the last 2 rows 3 times.

Next 4 Rows. Continue working in same manner, but do not increase in any row.

Next Row. Working in back loop of sts only, work 1 d c in each of the next 2 s c, 1 tr c in each of the next 10 s c, 1 d c in each of the next 12 s c, 1 tr c in each of the next 10 s c, 1 d c in each of the next 3 s c, do not turn. Work a row of s c around entire section, join in 1st s c, cut thread.

BACK SECTION: Starting at lower edge, ch 57, s c in 2nd st from hook, 1 s c in each remaining st of ch, ch 3, turn.

(continuation from page 14)

2nd Row. Working in back loop of sts only, work 1 d c in each s c, ch 1, turn.

3rd Row. Working in both loops of sts, work in s c decreasing 1 s c at the beginning and end of row (to decrease: * insert hook in next st, pull loop through, repeat from * once, thread over and work off all loops at one time), ch 3, turn.

4th Row. Working in back loop of sts, work in d c decreasing 1 d c at the beginning and end of row (to decrease: * thread over hook, insert in next st, pull loop through, thread over and work off 2 loops, repeat from * once, thread over and work off all loops at one time). Repeat the last 2 rows 3 times, do not turn. Work a row of s c around entire section, join in 1st s c, cut thread.

SOLES: Ch 21, 4 d c in 4th st from hook (center front), 1 d c in each of the next 16 sts of ch, 5 d c in last st (center back), working on opposite side of starting ch, work 1 d c in each of the next 16 sts, join in 3rd st of ch.

2nd Round. Ch 3, d c in same space, 2 d c in each of the next 4 d c, 1 d c in each of the next 16 d c, 2 d c in each of the next 5 d c, 1 d c in each of the next 16 d c, join in 3rd st of ch.

3rd Round. Ch 3, d c in same space, 2 d c in each of the next 9 d c, 1 d c in each of the next 16 d c, 2 d c in each of the next 10 d c, 1 d c in each of the next 16 d c, join in 3rd st of ch.

4th Round. Ch 3, 1 d c in each of the next 6 d c, 2 d c in each of the next 6 d c, 1 d c in each of the next 7 d c, 1 s d c in each of the next 5 d c (s d c: thread over hook, insert in st, pull loop through, thread over and pull through all loops at one time), 1 s c in each of the next 6 d c, 1 s d c in each of the next 5 d c, 1 d c in each of the next 7 d c, 2 d c in each of the next 6 d c, 1 d c in each of the next 7 d c, 1 s d c in each of the next 5 d c, 1 s c in each of the next 6 d c, 1 s d c in each of the next 5 d c, join in 3rd st of ch.

5th Round. Ch 3, 1 d c in each of the next 8 d c, 2 d c in each of the next 8 d c, 1 d c in each of the next 13 sts, 1 s d c in each of the next 4 sts, 1 s c in each of the next 7 sts, 1 s d c in each of the next 4 sts, 1 d c in each of the next 6 sts, 2 d c in each of the next 8 sts, 1 d c in each of the next 6 sts, 1 s d c in each of the next 4 sts, 1 s c in each of the next 7 sts, 1 s d c in each of the next 4 sts, 1 d c in each remaining st, join, cut thread. Work another sole in same manner. Cut cardboard same size as sole. Place between soles and overcast together. Sew back section to sole. Sew front section to soles, overlapping back section at sides and leaving 3 rows free at each end of front section.

CUSHION: Cut a piece of satin 4½ x 5½ inches. Sew the 2 long sides together. Fill with kapok and sew free ends, pulling thread so that ends will be rounded. Place in bootie and tack in position. Make a rosette of ribbon making 10 loops and allowing about 2¼ inches for each loop.

CENTER OF ROSETTE: Ch 4, join to form a ring, ch 3 and work 17 d c in ring, join.

2nd Round. Ch 3, sl st in same space, * skip 1 d c, sl st in next d c, ch 3, sl st in same space, repeat from * all around, join, cut thread leaving a length for sewing. Sew to center of rosette and tack rosette to slipper.

Cut 2 lengths of ribbon 26 inches long. Lace under 6 d c’s of 6th row from top at center of back of slipper, knot close to slipper and tack under knot. Make a bow and sew to free ends of ribbon. Work another bootie in same manner.

## Crocheted Necktie

Make this tie with any of the AMERICAN THREAD COMPANY products listed below:

Material | Quantity | Size of Needle
--- | --- | ---
The Famous “PURITAN” CROCHET COTTON Article 40 | 2 balls Red or color desired | steel 10
or
“DE LUXE” Quality CROCHET COTTON Article 346 | 2 balls Red or color desired | steel 10
or
“STAR” PEARL COTTON Article 90, size 5 | 4 balls Lt. Red or color desired | steel 10

¼ yd. ½ inch ribbon.

GAUGE: 2 shells = 2 inches.

Tie is worked firmly.

Ch 25, 3 d c in 5th st from hook, skip 3 sts of ch, s c in next st, * ch 2, 3 d c in same space, skip 3 sts of ch, s c in next st, repeat from * 3 times (5 shells), ch 4, turn.

2nd Row. 3 d c in same space, * s c in ch 2 loop of next shell, ch 2, 3 d c in same space (pattern), repeat from * 3 times, s c in ch 2 loop of last shell, ch 4, turn. Repeat 2nd row until work measures 16 inches from beginning, ch 4, turn.

Next Row. 3 d c in same space, s c in ch 2 loop of next shell, ch 2, 3 d c in same space, * insert hook in ch 2 loop of next shell, pull loop through, repeat from * once, thread over hook and pull through all 3 loops at one time (a decrease of 1 shell), ch 2, 3 d c in same space, s c in ch 2 loop of next shell, ch 2, 3 d c in same space, s c in ch 2 loop of last shell, ch 4, turn (4 shells). Work even in pattern for 2½ inches, ch 4, turn.

Next Row. 3 d c in same space, s c in ch 2 loop of next 14 shell, ch 2, 3 d c in same space, decrease in next 2 shells, ch 2, 3 d c in same space, s c in ch 2 loop of last shell, ch 4, turn (3 shells). Work even in pattern until tie measures 21 inches, ch 1, turn.

Next Row. NECKBAND: S c in next s c, * 1 s c in each of 3 d c of next shell, repeat from * twice, s c in ch 2 loop of last shell, ch 1, turn (11 s c).

Next Row. 1 s c in each s c, ch 1, turn. Repeat last row until band measures 12 inches, ch 4, turn.

Next Row. 3 d c in same space, skip next 3 sts, s c in next st, ch 3, 2 d c in same space, skip next 2 sts, s c in next st, ch 2, 3 d c in same space, skip next 2 sts, s c in last st, ch 4, turn (3 shells). Work even in pattern for 2½ inches, ch 4, turn.

Next Row. 3 d c in same space, s c in ch 2 loop of next shell, ch 2, 3 d c in same space, s c in next s c between shells, ch 2, 3 d c in same space, s c in ch 2 loop of next shell, ch 2, 3 d c in same space, s c in ch 2 loop of last shell, ch 4, turn (4 shells). Work even in pattern for 10½ inches, cut yarn. Face neckband with ribbon, using “STAR” Mercerized Sewing Thread.

## Transcriber’s Notes

- Silently corrected a few typos.
- Relocated material “continued on remote page” for more conveniently-flowing text; some entire pages appear out of sequence.
- Retained publication information from the printed edition: this eBook is public-domain in the country of publication.
- In the text versions only, text in italics is delimited by _underscores_.

*** END OF THE PROJECT GUTENBERG EBOOK SUGGESTIONS FOR FAIRS AND BAZAARS ***
Updated editions will replace the previous one—the old editions will be renamed.
Creating the works from print editions not protected by U.S. copyright law means that no one owns a United States copyright in these works, so the Foundation (and you!) can copy and distribute it in the United States without permission and without paying copyright royalties. Special rules, set forth in the General Terms of Use part of this license, apply to copying and distributing Project Gutenberg™ electronic works to protect the PROJECT GUTENBERG™ concept and trademark. Project Gutenberg is a registered trademark, and may not be used if you charge for an eBook, except by following the terms of the trademark license, including paying royalties for use of the Project Gutenberg trademark. If you do not charge anything for copies of this eBook, complying with the trademark license is very easy. You may use this eBook for nearly any purpose such as creation of derivative works, reports, performances and research. Project Gutenberg eBooks may be modified and printed and given away—you may do practically ANYTHING in the United States with eBooks not protected by U.S. copyright law. Redistribution is subject to the trademark license, especially commercial redistribution.
START: FULL LICENSE

## THE FULL PROJECT GUTENBERG LICENSE

PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK
To protect the Project Gutenberg™ mission of promoting the free distribution of electronic works, by using or distributing this work (or any other work associated in any way with the phrase “Project Gutenberg”), you agree to comply with all the terms of the Full Project Gutenberg™ License available with this file or online at www.gutenberg.org/license.
Section 1. General Terms of Use and Redistributing Project Gutenberg™ electronic works
1.A. By reading or using any part of this Project Gutenberg™ electronic work, you indicate that you have read, understand, agree to and accept all the terms of this license and intellectual property (trademark/copyright) agreement. If you do not agree to abide by all the terms of this agreement, you must cease using and return or destroy all copies of Project Gutenberg™ electronic works in your possession. If you paid a fee for obtaining a copy of or access to a Project Gutenberg™ electronic work and you do not agree to be bound by the terms of this agreement, you may obtain a refund from the person or entity to whom you paid the fee as set forth in paragraph 1.E.8.
1.B. “Project Gutenberg” is a registered trademark. It may only be used on or associated in any way with an electronic work by people who agree to be bound by the terms of this agreement. There are a few things that you can do with most Project Gutenberg™ electronic works even without complying with the full terms of this agreement. See paragraph 1.C below. There are a lot of things you can do with Project Gutenberg™ electronic works if you follow the terms of this agreement and help preserve free future access to Project Gutenberg™ electronic works. See paragraph 1.E below.
1.C. The Project Gutenberg Literary Archive Foundation (“the Foundation” or PGLAF), owns a compilation copyright in the collection of Project Gutenberg™ electronic works. Nearly all the individual works in the collection are in the public domain in the United States. If an individual work is unprotected by copyright law in the United States and you are located in the United States, we do not claim a right to prevent you from copying, distributing, performing, displaying or creating derivative works based on the work as long as all references to Project Gutenberg are removed. Of course, we hope that you will support the Project Gutenberg™ mission of promoting free access to electronic works by freely sharing Project Gutenberg™ works in compliance with the terms of this agreement for keeping the Project Gutenberg™ name associated with the work. You can easily comply with the terms of this agreement by keeping this work in the same format with its attached full Project Gutenberg™ License when you share it without charge with others.
1.D. The copyright laws of the place where you are located also govern what you can do with this work. Copyright laws in most countries are in a constant state of change. If you are outside the United States, check the laws of your country in addition to the terms of this agreement before downloading, copying, displaying, performing, distributing or creating derivative works based on this work or any other Project Gutenberg™ work. The Foundation makes no representations concerning the copyright status of any work in any country other than the United States.
1.E. Unless you have removed all references to Project Gutenberg:
1.E.1. The following sentence, with active links to, or other immediate access to, the full Project Gutenberg™ License must appear prominently whenever any copy of a Project Gutenberg™ work (any work on which the phrase “Project Gutenberg” appears, or with which the phrase “Project Gutenberg” is associated) is accessed, displayed, performed, viewed, copied or distributed:

> This eBook is for the use of anyone anywhere in the United States and most other parts of the world at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org. If you are not located in the United States, you will have to check the laws of the country where you are located before using this eBook.

1.E.2. If an individual Project Gutenberg™ electronic work is derived from texts not protected by U.S. copyright law (does not contain a notice indicating that it is posted with permission of the copyright holder), the work can be copied and distributed to anyone in the United States without paying any fees or charges. If you are redistributing or providing access to a work with the phrase “Project Gutenberg” associated with or appearing on the work, you must comply either with the requirements of paragraphs 1.E.1 through 1.E.7 or obtain permission for the use of the work and the Project Gutenberg™ trademark as set forth in paragraphs 1.E.8 or 1.E.9.
1.E.3. If an individual Project Gutenberg™ electronic work is posted with the permission of the copyright holder, your use and distribution must comply with both paragraphs 1.E.1 through 1.E.7 and any additional terms imposed by the copyright holder. Additional terms will be linked to the Project Gutenberg™ License for all works posted with the permission of the copyright holder found at the beginning of this work.
1.E.4. Do not unlink or detach or remove the full Project Gutenberg™ License terms from this work, or any files containing a part of this work or any other work associated with Project Gutenberg™.
1.E.5. Do not copy, display, perform, distribute or redistribute this electronic work, or any part of this electronic work, without prominently displaying the sentence set forth in paragraph 1.E.1 with active links or immediate access to the full terms of the Project Gutenberg™ License.
1.E.6. You may convert to and distribute this work in any binary, compressed, marked up, nonproprietary or proprietary form, including any word processing or hypertext form. However, if you provide access to or distribute copies of a Project Gutenberg™ work in a format other than “Plain Vanilla ASCII” or other format used in the official version posted on the official Project Gutenberg™ website (www.gutenberg.org), you must, at no additional cost, fee or expense to the user, provide a copy, a means of exporting a copy, or a means of obtaining a copy upon request, of the work in its original “Plain Vanilla ASCII” or other form. Any alternate format must include the full Project Gutenberg™ License as specified in paragraph 1.E.1.
1.E.7. Do not charge a fee for access to, viewing, displaying, performing, copying or distributing any Project Gutenberg™ works unless you comply with paragraph 1.E.8 or 1.E.9.
1.E.8. You may charge a reasonable fee for copies of or providing access to or distributing Project Gutenberg™ electronic works provided that:

- • You pay a royalty fee of 20% of the gross profits you derive from the use of Project Gutenberg™ works calculated using the method you already use to calculate your applicable taxes. The fee is owed to the owner of the Project Gutenberg™ trademark, but he has agreed to donate royalties under this paragraph to the Project Gutenberg Literary Archive Foundation. Royalty payments must be paid within 60 days following each date on which you prepare (or are legally required to prepare) your periodic tax returns. Royalty payments should be clearly marked as such and sent to the Project Gutenberg Literary Archive Foundation at the address specified in Section 4, “Information about donations to the Project Gutenberg Literary Archive Foundation.”
- • You provide a full refund of any money paid by a user who notifies you in writing (or by e-mail) within 30 days of receipt that s/he does not agree to the terms of the full Project Gutenberg™ License. You must require such a user to return or destroy all copies of the works possessed in a physical medium and discontinue all use of and all access to other copies of Project Gutenberg™ works.
- • You provide, in accordance with paragraph 1.F.3, a full refund of any money paid for a work or a replacement copy, if a defect in the electronic work is discovered and reported to you within 90 days of receipt of the work.
- • You comply with all other terms of this agreement for free distribution of Project Gutenberg™ works.

1.E.9. If you wish to charge a fee or distribute a Project Gutenberg™ electronic work or group of works on different terms than are set forth in this agreement, you must obtain permission in writing from the Project Gutenberg Literary Archive Foundation, the manager of the Project Gutenberg™ trademark. Contact the Foundation as set forth in Section 3 below.
1.F.
1.F.1. Project Gutenberg volunteers and employees expend considerable effort to identify, do copyright research on, transcribe and proofread works not protected by U.S. copyright law in creating the Project Gutenberg™ collection. Despite these efforts, Project Gutenberg™ electronic works, and the medium on which they may be stored, may contain “Defects,” such as, but not limited to, incomplete, inaccurate or corrupt data, transcription errors, a copyright or other intellectual property infringement, a defective or damaged disk or other medium, a computer virus, or computer codes that damage or cannot be read by your equipment.
1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the “Right of Replacement or Refund” described in paragraph 1.F.3, the Project Gutenberg Literary Archive Foundation, the owner of the Project Gutenberg™ trademark, and any other party distributing a Project Gutenberg™ electronic work under this agreement, disclaim all liability to you for damages, costs and expenses, including legal fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH DAMAGE.
1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a defect in this electronic work within 90 days of receiving it, you can receive a refund of the money (if any) you paid for it by sending a written explanation to the person you received the work from. If you received the work on a physical medium, you must return the medium with your written explanation. The person or entity that provided you with the defective work may elect to provide a replacement copy in lieu of a refund. If you received the work electronically, the person or entity providing it to you may choose to give you a second opportunity to receive the work electronically in lieu of a refund. If the second copy is also defective, you may demand a refund in writing without further opportunities to fix the problem.
1.F.4. Except for the limited right of replacement or refund set forth in paragraph 1.F.3, this work is provided to you ‘AS-IS’, WITH NO OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.
1.F.5. Some states do not allow disclaimers of certain implied warranties or the exclusion or limitation of certain types of damages. If any disclaimer or limitation set forth in this agreement violates the law of the state applicable to this agreement, the agreement shall be interpreted to make the maximum disclaimer or limitation permitted by the applicable state law. The invalidity or unenforceability of any provision of this agreement shall not void the remaining provisions.
1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the trademark owner, any agent or employee of the Foundation, anyone providing copies of Project Gutenberg™ electronic works in accordance with this agreement, and any volunteers associated with the production, promotion and distribution of Project Gutenberg™ electronic works, harmless from all liability, costs and expenses, including legal fees, that arise directly or indirectly from any of the following which you do or cause to occur: (a) distribution of this or any Project Gutenberg™ work, (b) alteration, modification, or additions or deletions to any Project Gutenberg™ work, and (c) any Defect you cause.
Section 2. Information about the Mission of Project Gutenberg™
Project Gutenberg™ is synonymous with the free distribution of electronic works in formats readable by the widest variety of computers including obsolete, old, middle-aged and new computers. It exists because of the efforts of hundreds of volunteers and donations from people in all walks of life.
Volunteers and financial support to provide volunteers with the assistance they need are critical to reaching Project Gutenberg™’s goals and ensuring that the Project Gutenberg™ collection will remain freely available for generations to come. In 2001, the Project Gutenberg Literary Archive Foundation was created to provide a secure and permanent future for Project Gutenberg™ and future generations. To learn more about the Project Gutenberg Literary Archive Foundation and how your efforts and donations can help, see Sections 3 and 4 and the Foundation information page at www.gutenberg.org.
Section 3. Information about the Project Gutenberg Literary Archive Foundation
The Project Gutenberg Literary Archive Foundation is a non-profit 501(c)(3) educational corporation organized under the laws of the state of Mississippi and granted tax exempt status by the Internal Revenue Service. The Foundation’s EIN or federal tax identification number is 64-6221541. Contributions to the Project Gutenberg Literary Archive Foundation are tax deductible to the full extent permitted by U.S. federal laws and your state’s laws.
The Foundation’s business office is located at 809 North 1500 West, Salt Lake City, UT 84116, (801) 596-1887. Email contact links and up to date contact information can be found at the Foundation’s website and official page at www.gutenberg.org/contact
Section 4. Information about Donations to the Project Gutenberg Literary Archive Foundation
Project Gutenberg™ depends upon and cannot survive without widespread public support and donations to carry out its mission of increasing the number of public domain and licensed works that can be freely distributed in machine-readable form accessible by the widest array of equipment including outdated equipment. Many small donations ($1 to $5,000) are particularly important to maintaining tax exempt status with the IRS.
The Foundation is committed to complying with the laws regulating charities and charitable donations in all 50 states of the United States. Compliance requirements are not uniform and it takes a considerable effort, much paperwork and many fees to meet and keep up with these requirements. We do not solicit donations in locations where we have not received written confirmation of compliance. To SEND DONATIONS or determine the status of compliance for any particular state visit www.gutenberg.org/donate.
While we cannot and do not solicit contributions from states where we have not met the solicitation requirements, we know of no prohibition against accepting unsolicited donations from donors in such states who approach us with offers to donate.
International donations are gratefully accepted, but we cannot make any statements concerning tax treatment of donations received from outside the United States. U.S. laws alone swamp our small staff.
Please check the Project Gutenberg web pages for current donation methods and addresses. Donations are accepted in a number of other ways including checks, online payments and credit card donations. To donate, please visit: www.gutenberg.org/donate.
Section 5. General Information About Project Gutenberg™ electronic works
Professor Michael S. Hart was the originator of the Project Gutenberg™ concept of a library of electronic works that could be freely shared with anyone. For forty years, he produced and distributed Project Gutenberg™ eBooks with only a loose network of volunteer support.
Project Gutenberg™ eBooks are often created from several printed editions, all of which are confirmed as not protected by copyright in the U.S. unless a copyright notice is included. Thus, we do not necessarily keep eBooks in compliance with any particular paper edition.
Most people start at our website which has the main PG search facility: www.gutenberg.org.
This website includes information about Project Gutenberg™, including how to make donations to the Project Gutenberg Literary Archive Foundation, how to help produce our new eBooks, and how to subscribe to our email newsletter to hear about new eBooks.