Project Gutenberg's Theory Of Silk Weaving, by Arnold Wolfensberger This eBook is for the use of anyone anywhere at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org Title: Theory Of Silk Weaving Author: Arnold Wolfensberger Release Date: January 5, 2005 [EBook #14600] Language: English Character set encoding: ISO-8859-1 *** START OF THIS PROJECT GUTENBERG EBOOK THEORY OF SILK WEAVING *** Produced by Stan Goodman, Keith Edkins and the PG Online Distributed Proofreading Team [Page 1] THEORY OF SILK WEAVING [Page 3] THEORY OF SILK WEAVING A Treatise on the Construction and Application of Weaves, and the Decomposition and Calculation of Broad and Narrow, Plain, Novelty and Jacquard Silk Fabrics Containing 95 Plates _By_ ARNOLD WOLFENSBERGER Graduate of the Textile Institute of Zurich, Switzerland * * * * * Second Revised and Enlarged Edition * * * * * NEW YORK _Issued by_ THE AMERICAN SILK JOURNAL CLIFFORD & LAWTON _Publishers_ _1921_ [Page 4] * * * * * COPYRIGHT. 1921. by CLIFFORD & LAWTON _All rights reserved_ * * * * * GROLIER CRAFT PRESS, Printers. 229 West Twenty-eighth Street, New York City * * * * * [Page 5] PREFACE The silk industry of America has of late years rapidly advanced to the front rank among the great textile industries of the world. It may indeed be proud of this position, to which that enterprising spirit and untiring energy peculiar to our nation, combined with our great technical and natural resources, has brought it. That we are, on the other hand, not yet at the height of perfection we are also compelled to acknowledge, but if we consider the short space of time that the American industry has required for its development, as compared to the decades, almost centuries, to which some of the great European silk centers can look back, the fact is neither surprising nor discouraging. While it must not be our aim to imitate or copy their ways, inasmuch as out conditions and circumstances are quite different from theirs, we may still profitably study their methods in order to overcome our deficiencies. The greatest advantage which our competitors derive from such a long existence consists in having at their disposal a force of skilful, trained help. The manufacturers, appreciating the importance of this factor, make great efforts and pecuniary sacrifices to elevate and maintain the high standard of their industry. For instance, they support textile schools and lecture courses, where young men can acquire a thorough technical education and equip themselves for a career of usefulness, thereby serving their own interests and at the same time furthering those of their chosen profession. [Page 6] This beneficial influence cannot fail to exert itself from the standard of the higher employer down to that of the weaver, who would naturally take more pains and interest in his work than if he were a mere mechanical appendage to his loom in order to keep it in motion. Very little has been done in his country for technical education as far as the silk industry is concerned, and it was on this special branch, that prompted the author to offer in the present little work a treatise on the theory of shaft weaving for broad silks and ribbons. It is divided into three principal parts: #1st. Drawing-in the warp in the harness. 2nd. The weaves and their application. 3rd. Decomposition or analysis of the cloth.# To the foregoing there have been added in the revised and enlarged edition several additional parts covering the following: JACQUARD WEAVES, BOX LOOM WEAVES, including CREPES, and COST CALCULATIONS for plain and fancy weaves. The subject while condensed, is made as clear and comprehensible as possible, and to many desirous of increasing their knowledge in this direction, this should prove a valuable help. The author, through the medium of this work, hopes to win the approval and encouragement of the manufacturers, and will feel amply repaid should his efforts tend to develop a deeper interest in the "Queen of Textiles." * * * * * [Page 7] THEORY OF SILK WEAVING DRAWING-IN With this term we designate the operation preceding the weaving, by which all the warp-threads are drawn through the heddles of the harness. The order in which this is done varies according to the weave and the nature of the fabric to be produced; so we distinguish: #Straight draws, Skip draws, Point draws, Section draws.# * * * * * STRAIGHT DRAWS [Illustration: Fig. 1] * * * * [Page 8] [Illustration: Fig. 2] These form the simplest and most common method of drawing-in. We begin with the first heddle on the left side of the shaft _nearest to the warp-beam_, then take the first heddle of second shaft and so on until all the shafts the set contains are used in rotation. This completes one "draw," and this operation is repeated until all the warp-threads are taken up. The method of making the shaft nearest to the warp-beam the first, is almost universal with the silk business and is technically called _drawing-in from back to front_. The opposite, or drawing in from _front to rear_, is used occasionally, however, and in this case makes the first heddle on the left hand side of the front shaft No. 1. The making out of the _Drawing-in Draft_, which must indicate the arrangement or the rotation in which the warp-threads are drawn in, can be done in various ways, of which we will mention the two most popular methods. The first is by using common designing paper, and indicating the rotation by dots. The horizonal rows of squares represent the shafts, the vertical rows the warp-threads. Fig. 1 shows four repeats of a straight draw on six harness marked out according to this idea. A second method is to use paper ruled horizontally, the lines representing the shafts; and to draw vertical lines for the warp-threads. The latter are made to stop on [Page 9] the lines bearing the number of the shafts into which the respective threads are to be drawn. Fig. 2 is such a draft, illustrating six repeats of a draw on four harness from "Front to Rear." * * * * * SKIP DRAWS [Illustration: Fig. 3] * * * * [Illustration: Fig. 4] The draws coming under this heading are used very extensively in silk weaving, especially for fabrics requiring a heavy warp and a large number of shafts. Enter first the odd and then the even shafts. An 8 harness draw of this kind, of which three repeats are shown in Fig. 3, runs as follows: 1, 3, 5, 7, 2, 4, 6, 8. Fig. 4 is a 12 harness draw of the same class. * * * * * POINT DRAWS [Illustration: Fig. 5] * * * * [Page 10] [Illustration: Fig. 6] * * * * [Illustration: Fig. 7] * * * * [Illustration: Fig. 8] * * * * [Illustration: Fig. 9] [Page 11] Point draws are a combination of a regular straight draw from back to front and one from front to back, the first and the last shafts only being used once, while the rest receive two ends each in one repeat of the draw. Fig. 5 illustrates a regular point draw in 2 repeats on 10 shafts. It will be seen that 14 ends make a repeat; in fact, the number of warp-threads required for one draw will always be double the number of harness less 2, hence a 12 harness regular point draw will require 22 warp-threads for a repeat. The drawing-in draft illustrated in Fig. 6 is a slight variation of the regular point draw; it consists, as will be seen, of a draw from back to front, and also a full one from front to back, there by causing a _double point_. Another change from the regular point draw is illustrated in Figs. 7 and 8; this class may be called _Broken point draws_, because a new draw is begun before the other one is complete. Fig. 9 also comes in this class and represents a _zigzag draw_ on 10 harness. The drawing-in drafts which we have described under the head of "Point draws," are used mostly to obtain the various pointed and zigzag effects. * * * * * SECTION DRAWS [Illustration: Fig. 10] * * * * [Page 12] [Illustration: Fig. 11] * * * * [Illustration: Fig. 12] * * * * [Illustration: Fig. 13] * * * * [Illustration: Fig. 14] * * * * [Page 13] [Illustration: Fig. 15] This division of drawing-in drafts is used extensively in silk manufacturing; for instance, in all fabrics having a ground warp and a binder warp, also in double-face goods, or where two different weaves are combined in one effect. One or more threads are drawn on the first section, then one or more on a second and third, if the harness is divided in so many sets. The following examples will illustrate the principle of these draws. In Fig. 10, shafts 1, 2, 3, 4 from the first set, shafts 5 and 6 the second, 8 threads are drawn straight on the first, then 2 on the second section. Fig. 11, first set shafts 1 to 6 inclusive, second set shafts 7 and 8. Fig. 12 is drawn end and end on two sections having 8 shafts each. Figs. 13, 14 and 15, while not strictly belonging to the class of section draws, may, however, be considered under this heading. The idea is to draw a certain number of ends in one part of the harness and another group in another part, be it straight, point or skip, which will cause the effect on the cloth to be accordingly transposed or broken up. [Page 15] * * * * * THE WEAVES AND THEIR CONSTRUCTION In any woven fabric we distinguish two systems of threads, the _Warp or Chain_, running lengthways in the cloth, and the _Filling or Weft_, crossing the former at right angles. This crossing or interlacing consists of every individual warp-thread being placed alternately under and over one or more threads of the filling system. The arrangement of this interlacing is technically called the _Weave_, and the variety in which the points of crossing can be distributed is practically endless. It is principally the weave that lends to a fabric its character, influenced, of course, by the material used, the size and tension of the threads and the combination of the colors. The weaves are divided into three main classes: _the Foundation weaves_. In the silk business they are known under the following names: #The Taffeta Weave, The Serge Weave, The Satin Weave.# In the foundation weaves each thread effects only one crossing in one repeat of the weave, and the points of interlacing occur in a given rotation. A repeat in the foundation weaves comprises the same number of warp-threads as of _picks_ or filling threads, and if this number is 8, for [Page 16] instance, the weave is called an 8-shaft or an 8-harness weave. In marking out a weave, the warp-threads are represented by vertical lines, the filling by horizontal ones, or in each case by the space between these lines. The places where a warp-thread lies over the filling are marked with paint or simply with a cross. In a similar manner we mark out the _chain draft_, which indicates the rotation in which the shafts are raised. * * * * * [Page 17] THE TAFFETA WEAVE [Illustration: Fig. 16] * * * * [Illustration: Fig. 17] [Page 18] This is the simplest and oldest method of interlacing. The odd numbers of warp-threads cross the even numbers after every pick; hence of two warp-threads one will always go over the first pick and under the second, and the other end under the first and over the second pick. Taffeta cloth, therefore, has the same appearance on both sides, and in cotton and wool weaving this weave is technically--and properly indeed--called the _Plain Weave_. It has the smallest repeat, 2 warp-threads and 2 picks, and the exchanging of warp and filling is the most frequent possible. The cloth thus produced is firmer and stronger than that obtained with any other weave. Fig. 16 is a taffeta on 4 shafts straight draw, the draft executed in the manner which we have already mentioned in explaining the drawing-in drafts. Fig. 17 on common designing paper, illustrates a taffeta made on 8-harness, skip draw. Be it mentioned that the drawing-in draft and the chain draft will be added throughout this work, the former over the weave to correspond with the respective warp-threads, the latter to the right of the drawing-in draft. * * * * * [Page 19] GROS DE TOURS WEAVES [Illustration: Fig. 18] * * * * [Illustration: Fig. 19] In this weave the working of the warp is the same as in taffeta, except that instead of one pick, two or more are inserted in the same shed. It is mostly used in selvedges, where it serves to give more firmness to the edge of an otherwise loosely woven cloth, and prevents the weaving ahead of the edge in a tight weave. Gros de Tours is sometimes used, especially when cotton or wool filling is employed, with a view to lay two picks nicely side by side, whereas a thread entered two ply with the taffeta weave will always receive some twist, which may disturb the perfect evenness of the fabric. Fig. 18 is a Gros de Tours with two picks on four harness straight through. Fig. 19 illustrates this weave with three picks drawn end and end on two sections of four shafts each. * * * * * [Page 20] SERGE or TWILL WEAVES While the taffeta weave produces either an entirely smooth fabric, or one with a distinct transverse rib as in gros-grain, the twill weave forms diagonal lines on the cloth, running either from left to right or from right to left. To make a twill, not less than three ends and three picks are required, of which each thread floats over two of the other system and interlaces with the third. The rotation of the interlacing is always consecutive, that is it moves with each succeeding pick one thread to the right (or to the left if the lines are to run in that direction). If warp and filling have the same texture, that is the same number of threads in a given space, the twill lines will form an angle of 45°; if the warp stands closer than the filling, the incline will be steeper, and in the opposite case the angle will approach more the horizontal. The weaves can be expressed in numbers, for instance: the 3-end twill warp effect would be marked 2-1, which indicates that each warp-thread goes over two and under one pick. Twill weaves are called _evensided_ when the arrangement of "warp up" and "filling up" are evenly balanced, and _unevensided_ if either warp or filling predominate on the face of the fabric; the latter class is therefore subdivided in _Warp effects_ and _Filling effects_. In the following a number of serge weaves are illustrated, the French designations being added in some cases, as they are still extensively used in the trade. [Page 21] * * * * * FILLING EFFECTS _Satin de Lyon,_ 2-1. On 6 harness straight through. [Illustration: Fig. 20] * * * * _Levantine,_ 3-1 On 8 shafts skip draw. [Illustration: Fig. 21] * * * * [Page 22] _Polonaise,_ 5-1 On 12 harness skip draw. [Illustration: Fig. 22] * * * * _Serge grosse côte,_ 7-1 On 8 shafts straight through. [Illustration: Fig. 23] * * * * [Page 23] _Serge remaine,_ 6-2 On 8 shafts skip draw. [Illustration: Fig. 24] * * * * _Serge,_ 5-1, 1-1. On 8 shafts skip draw. [Illustration: Fig. 25] * * * * [Page 24] _Serge,_ 4-2, 1-1, 1-1. On 10 harness straight through. [Illustration: Fig. 26] * * * * _Serge,_ 7-1, 1-1, 1-1, 1-1, 1-1. On 16 shafts skip draw. [Illustration: Fig. 27] * * * * * [Page 25] WARP EFFECTS _Levantine,_ 3-1. On 4 shafts straight through. [Illustration: Fig. 28] * * * * _Serge,_ 5-1, 1-1. On 8 shafts skip draw. [Illustration: Fig. 29] * * * * * [Page 26] EVENSIDED TWILLS _Surah,_ 2-2 On 4 shafts straight through. [Illustration: Fig. 30] * * * * _Croise,_ 3-3, 2-2, 1-1. On 12 shafts straight through. [Illustration: Fig. 31] * * * * [Page 27] _Serge,_ 7-7, 1-1, 1-1, 1-1 On 20 shafts skip draw. [Illustration: Fig. 32] * * * * * POINTED TWILLS in the direction of the filling and also of the warp. [Illustration: Fig. 33] On 4 shafts point draw, weave 3-1. * * * * [Page 28] [Illustration: Fig. 34] On 6 shafts point draw, drawn as follows: Eighteen ends from back to front and 4 ends from front to rear, weave 5-1. * * * * [Illustration: Fig. 35] On 8 shafts pointed draw, weave 5-1, 1-1. * * * * [Page 29] [Illustration: Fig. 36] On 10 shafts, with weave 3-3, drawn as follows: 7 threads from back to front. 3 " " front to rear. 6 " " back to front. 2 " " front to rear. * * * * [Illustration: Fig. 37] On 6 shafts straight draw, pointed weave 5-1. * * * * [Page 30] [Illustration: Fig. 38] On 8 shafts straight through, pointed weave 5-1, 1-1. * * * * [Illustration: Fig. 39] _Broken pointed twill_, on 8 harness. * * * * [Page 31] [Illustration: Fig. 40] On 6 shafts point draw, pointed weave 5-1. * * * * [Illustration: Fig. 41] On 8 shafts point draw, pointed weave 5-1, 1-1. * * * * [Page 32] [Illustration: Fig. 42] _Fancy twill_, on 16 shafts straight draw. * * * * * SATIN WEAVES The distinct diagonal lines which characterize the class of weaves explained in the previous chapter are absent in the satin weaves; and while the interlacing in the former is done in a strictly consecutive order, we endeavor to scatter the points of stitching in the latter as much as possible, in order to create an entirely smooth and brilliant surface on [Page 33] the cloth. In all satins the number of ends in a repeat is the same in warp and filling. The lowest repeat of a regular satin comprises five threads of each system, and the interlacing is done in the following order: The 1st pick with the 1st warp-thread " 2d " " 3d " " 3d " " 5th " " 4th " " 2d " " 5th " " 4th " Fig. 43 illustrates this weave. An examination of the rotation, as given above, will show that every warp-thread intersects two picks apart from its neighbor. The number "2" is in this case what is technically known as the _counter_, that is the number which indicates the points of interlacing by adding it to number 1 and continuing so until all the warp-threads are taken up. The following is the rule to find the counter for any regular satin: Divide the number of harness into two parts, which must neither be equal nor have a common divisor. Any of these two numbers can be used for counting off, but usually the smaller one is taken. According to this rule we obtain a regular satin On 5 harness with counter 2 " 7 " " 2 or 3 " 8 " " 3 " 9 " " 2 or 4 " 10 " " 3 " 11 " " 2, 3, 4 or 5 " 12 " " 5 " 13 " " 2, 3, 4, 5 or 6 " 14 " " 3 or 5 " 15 " " 2, 4 or 7 " 16 " " 3, 5 or 7. [Page 34] The 4 harness broken twill, Fig. 53, is sometimes classed among the satins. The 6 harness satin, Fig. 54, is irregular; as a counter cannot be derived from number 6 by the given rule. The rotation generally used is 1, 3, 6, 4, 2, 5. * * * * * Regular Satins _5 harness Satin, "Satin de Chine."_ Straight draw, counter 2. [Illustration: Fig. 43] * * * * _7 harness Satin, "Satin Merveilleux."_ Skip draw, counter 2. [Illustration: Fig. 44] * * * * [Page 35] _7 harness satin_ Straight draw, counter 3. [Illustration: Fig. 45] * * * * _8 harness satin "Duchese"_ Skip draw, counter 3. [Illustration: Fig. 46] * * * * [Page 36] _9 harness satin_ Straight draw, counter 4. [Illustration: Fig. 47] * * * * _10 harness satin_ Straight draw, counter 3. [Illustration: Fig. 48] * * * * [Page 37] _11 harness satin_ Skip draw, counter 5. [Illustration: Fig. 49] * * * * _12 harness satin_ Skip draw, counter 5. [Illustration: Fig. 50] * * * * [Page 38] _16 harness satin_ On 2 sections of 8 shafts each, drawn end and end, counter 7. [Illustration: Fig. 51] * * * * [Page 39] _8 harness satin, warp effect._ Straight draw, counter 3. [Illustration: Fig. 52] * * * * * IRREGULAR SATINS _Satin Turc._ On 4 shafts straight through. [Illustration: Fig. 53] * * * * [Page 40] _Satin à la Reine_ On 6 shafts straight draw. [Illustration: Fig. 54] * * * * [Page 41] * * * * * DERIVATIVE WEAVES #1. From the Taffeta# _Royale_ is a modification of the regular Gros de Tours, inasmuch as the rib line, which in the latter runs straight across the cloth, is broken off after a given number of warp-threads. These groups, which may comprise 8, 12 or more threads, will interlace each one pick higher than the preceding one. _Royale of 8 ends_ On 2 sections of 4 shafts each. [Illustration: Fig. 55] * * * * _Velours Ottoman or Faille française._ In order to obtain a broader rib than that of Gros de Tours, and at the same time to lend firmness to the fabric, we add to the ground warp, which forms the ribs, another or binder warp, which works continually taffeta, [Page 42] while the ground warp changes only every 3 or 4 picks for the rib. _Faille française._ 4 ends of ground on the first section of 8 shafts, skip draw. 1 " binder " second " 2 " [Illustration: Fig. 56] * * * * _Velours Ottoman without a Binder-warp._ In this weave, of which Fig. 57 illustrates a specimen, comprising 8 warp-threads and 32 picks in a repeat, the rib contains 4 picks. Of the 8 warp-threads, 3 float over and 3 under the rib, while the 2 others bind taffeta, which latter function is executed by 2 other threads in the next rib. [Page 43] [Illustration: Fig. 57] * * * * * 2. From the Twills One variety is obtained by interlacing the warp-threads alternately one or more picks behind, and then a number of picks ahead of their respective neighbors; so the complete arrangement of the points of binding in a repeat will generally form two parallel diagonal lines. This will cause the twill lines to appear less pronounced than is the case in the regular twill, and the character of the fabric approaches more that of the satin. [Page 44] [Illustration: Fig. 58] _Satin Sergé._ On 8 shafts, straight draw. * * * * [Illustration: Fig. 59] _Côte Satinée._ On 16 harness, skip draw. * * * * _Rhadzimir-Surah 2-2._ After a certain number of picks of the regular surah all the warp-threads are crossed in two's thereby causing a sort of a rib or cut line across the fabric. [Page 45] _Rhadzimir of 4 picks._ On 8 shafts, straight draw. [Illustration: Fig. 60] * * * * _Rhadzimir of 6 picks._ On 8 shafts, straight draw. [Illustration: Fig. 61] * * * * * [Page 46] 3. From the Satin Weave _Satin Soleil_ shows a satin-like surface with a cross line appearance. Fig. 62 illustrates it as made on 8 shafts, straight draw. [Illustration: Fig. 62] * * * * _Satin Grec_ is a 12-harness satin, in which a taffeta point is added to each place of interlacing, thus giving the cloth a much firmer hand. Fig. 63 represents this weave on 12 shafts, skip draw. [Page 47] [Illustration: Fig. 63] * * * * _Peau de Soie._ An 8-shaft satin with one point added on the right or left to the original spots, giving the fabric a somewhat grainy appearence. Fig. 64 represents a peau de soie on 8 shafts, straight through. [Illustration: Fig. 64] * * * * [Page 48] _Fleur de Soie._ The face is a satin de Lyon (2-1 twill), with a backing interlaced on the 12-shaft satin principle, Fig. 65, on 12 shafts, skip draw. [Illustration: Fig. 65] * * * * * [Page 49] CANNELE and REPP WEAVES are in their construction related to the taffeta, and are used mostly in the form of stripes as an additional ornament to a fabric. The threads going into the composition of these effects exchange continually from taffeta interlacing to floating over a certain number of threads, and must be introduced either in warp or filling close enough to make the floats cover up the taffeta work entirely, and thus enable the material used to show up with the full brilliancy it possesses. Cannele effects can be produced in two distinct ways. One is to let every individual thread work alternately taffeta and float, while in the other method one thread weaves always taffeta, and a second thread is used for the cannele exclusively. These latter threads must come from a separate warp, which is introduced to embellish the ground or taffeta part of the fabric. The floating threads can either stitch all on one pick and so form a continuous cut line, or be divided in groups, of which one will bind in the middle of the floats of the other group. The following designs show both the face and backside of the respective weaves: [Page 50] _Alternating Cannele_ of 6 picks. On 4 shafts, straight through. [Illustration: Fig. 66] * * * * _Canelle_ (2 beams). Over 3 picks, interlacing on every fourth pick, drawn end and end on 2 sections of 4 shafts each. [Illustration: Fig. 67] * * * * [Page 51] _Cannele_ over 5 picks, binding on the sixth, but every second thread advanced 3 picks (to the middle of the float of the first thread), drawn end and end on 2 sections of 4 shafts each. [Illustration: Fig. 68] * * * * [Page 52] _Cannele_ arranged in groups of 8 threads, floating over 6 picks and binding on the seventh and eighth, drawn on 2 sections, with 4 shafts in first and 2 in second section. [Illustration: Fig. 69] * * * * _Repp_ on 8 shafts straight through. Rotation of filling. 1 pick taffeta, 1 pick float (rib). [Illustration: Fig. 70] * * * * [Page 53] _Repp_ of 8 threads, on 2 sections of 4 shafts each, 8 ends per section. [Illustration: Fig. 71] * * * * _Repp_ of 5 threads, binding on the sixth; every second pick binds on the middle of the first pick. On 6 harness straight draw. [Illustration: Fig. 72] * * * * [Page 54] _Repp_ in groups, floating over 6 ends and binding on the seventh and eighth on 8 shafts straight draw. [Illustration: Fig. 73] * * * * * [Page 55] DOUBLE FACED FABRICS In this class we find either two systems of warp or of filling so combined that only one will be visible on either side. The color on one side is generally different from the other, and so may the interlacing be of a different nature on face and back. In the latter case great care must be exercised not to allow the weave on one side to disturb the one on the other, and as a rule the points of interlacing of the first warp or filling system are placed as much as possible in the middle of the floats of the second. This will prevent either color or weave to be seen on the opposite side, as the floats of one side will naturally lay themselves over the binders of the other. The number of ends in a repeat of the two weaves must either be alike or one a multiple of the other. Warp Effects _Levantine_ on 8 shafts straight draw. [Illustration: Fig. 74] * * * * [Page 56] _Serge_ 6-2 on 2 sections of 8 shafts each. [Illustration: Fig. 75] * * * * 8 _shaft satin_ on 2 sections of 8 harness each. [Illustration: Fig. 76] * * * * [Page 57] 12 _shaft satin_ on 2 sections of 12 shafts each. [Illustration: Fig. 77] * * * * _Cannele_ of 8 picks on 2 sections of 4 shafts each. [Illustration: Fig. 78] * * * * * [Page 58] FILLING EFFECTS _Serge_ 5-1 on 6 harness straight draw. [Illustration: Fig. 79] * * * * 10 _harness satin_ on 10 shafts skip draw. [Illustration: Fig. 80] * * * * [Page 59] _Repp_ on 2 sections of 4 shafts each, 8 threads per section. [Illustration: Fig. 81] * * * * [Page 60] PEKINS With this name we designate fabrics in which stripes of a different interlacing run in the direction of the warp. In combining these weaves it is advantageous to have them contrast distinctly, for instance, a short weave such as taffeta or Gros de Tours, with a longer and looser one such as satin, sergé or cannele, also changes from warp to filling effects. Care must be taken to arrange the joining of the two weaves so that the last thread of one weave will cross the first thread of the other. This will prevent the threads from either stripe to slide over into the other, and so make a clean cut line. #Pekin.# A stripe of 2 dents of 8 ends each, 8 shaft Satin, on 8 shafts straight draw. 12 " 2 " Taffeta " 4 " " " [Illustration: Fig. 82] * * * * [Page 61] #Pekin#. A stripe of 12 ends Cannele of 6 picks on 1st section of 4 shafts. 12 " Repp " 6 threads on 2d and 3d section of 2 shafts each. [Illustration: Fig. 83] * * * * [Page 62] #Pekin.# A stripe of 10 ends 5 leaf Satin on the 1st section of 5 shafts straight draw. 4 " Taffeta " 3d " 2 " " " 18 " Serge 3-1, 1-1 " 2d " 6 " " " [Illustration: Fig. 84] * * * * * [Page 63] BAYADÈRES While pekins are formed by warp stripes, bayadère shows us stripes of different weaves running in the direction of the filling. The rules given in the previous chapter as to the joining of the weaves will also apply here. The warp which was raised on the last pick of the weave must stay down wherever possible on the first pick of the following weave. The number of shafts employed must go up evenly in the repeat of each one of the weaves that go into the make up of the bayadère. #Bayadère# A stripe of 24 picks Gros de Tours } } on 8 shafts straight through. " 8 " 8-shaft Satin, } [Illustration: Fig. 85] * * * * [Page 64] #Bayadère# A stripe of 18 picks 6-shaft Satin } " 6 " Serge 5-1, } on 6 shafts, straight draw. " 4 " Taffeta, } [Illustration: Fig. 86] * * * * * [Page 65] CHECKS AND PLAIDS If pekin and bayadère stripes are combined, we obtain checked fabrics, and of these an endless variety and pleasing effects can be produced with the aid of suitable color combinations. #Check# of 16 threads and 12 picks of the 4 end broken twill, and 16 " " 12 " " Royale of 8 threads, drawn on 4 sections of 4 shafts each. [Illustration: Fig. 87] * * * * [Page 66] #Check# of 20 threads and 16 picks of 8-shaft Satin, " 20 " " 16 " " Taffeta, 4 " " Surah 3-1, drawn on 2 sections of 8 shafts each. [Illustration: Fig. 88] * * * * * [Page 67] DECOMPOSITION Under the name of _Disposition_ we comprise all those points and details which we must ascertain before we can proceed with the construction of a fabric. They are: 1. #The weave.# 2. #Length and width of the cloth.# 3. #The stock and the dyeing thereof.# 4. #Reed calculation# (number of dents and ends per inch and total number of dents required). 5. #Drawing-in the warp in harness and reed.# 6. #Texture and arrangement of warp# (warping ticket) 7. #Arrangement of harness.# 8. #Reduction of filling.# 9. #Calculation of warp and filling.# 10. #Finishing.# 11. #Calculation of cost.# [Page 68] 1. THE WEAVE If a given sample is to be reproduced or imitated, it must be analyzed, and the following hints will greatly facilitate this operation to the beginner. Cut the sample straight on two sides, and draw out a number of warp and filling threads until there is a small fringe of perhaps ¼ of an inch. This will allow a thread to be raised a little for examination, without danger of its falling out of the fabric. In most cases it is easier to dissect the filling side, that is, the interlacing of each warp-thread in the threads of the filling system. With the help of the microscope or counting glass we can easily determine over and under how many picks that thread passes and the points of interlacing are accordingly marked on designing paper. This being done for at least the length of a repeat warpways, we take it out and examine the following thread, and so on until the repeat filling-ways is complete. It is advisable to ascertain how many picks ahead or back of the first examined thread the next following one binds before taking the former out. A knowledge of the construction of weaves as explained in the foregoing chapters will enable us to determine the weave of a simple pattern by merely raising a warp-thread with a needle on any point of interlacing and counting off how many picks apart from this place it makes an impression. 2. LENGTH AND WIDTH OF THE FABRIC To the length and width which the finished product is to have, we must add a certain allowance for shrinkage and _taking up_ of warp during weaving. It may differ from one to ten per cent., according to the texture and weave of the fabric, and can be ascertained with sufficient accuracy by stretching out and measuring a thread of warp and filling and comparing their length with the respective measurements of the sample to be reproduced. [Page 69] 3. THE STOCK AND ITS DYE Under this heading we must give the particulars as to nature, _twist_, _quality_ and _size_ of the silk, and the directions for the dyeing, whether _bright_ or _souple_, and in what colors, also whether to be weighted or not. The size is generally ascertained (in practical work) by comparing it with other silk of which the exact count is known. Another method is to count the number of cocoon threads which a thread of the sample contains, adding to that 1/3 or ¼, according to the quality of the silk; the result will be the count in deniers. To obtain it in drams, divide the latter number by 17,3 as 1 dram is equal to 17,3 deniers. Suppose we find 20 cocoon ends in a thread of silk: add 1/3, and we have 26-2/3 deniers, which, divided by 17,3 make 1,54 drams. As silk is always more or less uneven, it is safer to count the cocoon fibers of several threads and to take average thereof. It requires the experience of years to judge with any degree of certainty as to the origin and quality of silk, whether it be "classical," "extra," "sublime," etc. There are machines wherewith to ascertain exactly the twist, that is, the number of turns the silk has received in the throwing process. In the dyeing we distinguish two great classes, of which the names themselves give a good definition. "Bright" has a brilliant luster, while "souple" has more of a dull, subdued appearance. To find out whether the silk has been weighted in the dyeing process, we may compare it with other silk of which the exact conditions are known, or we may burn a small quantity of it. Unweighted silk does not burn readily and leaves a residue of white ashes, while heavy weighted silk burns lively, leaving black, charry ashes. [Page 70] 4. REED CALCULATION We count the number of repeats of the weave in a given space, generally ¼ or ½ inch, and multiply this with the number of threads one repeat contains, which gives us the reduction of the warp. Suppose we had a taffeta, which, as we know, has only 2 ends to a repeat, and counted 30 interlacings per ¼ inch on one pick; we would have 60 threads per ¼ inch or 240 per one inch. In this case the reed may be 80 by 3 or 60 by 4. Another instance: In an 8-shaft satin we count 10 warp-threads, which bind on the same pick in ¼ inch; this, multiplied by 8, equals 80 ends per ¼, or 320 per one inch; the reed will be an 80 with 4 in a dent or a 64 by 5. In short, the number of the reed is found by dividing the number of warp-threads that are to go in one dent, in the number of ends per inch. Sometimes, the reed marks are clearly visible in a sample by holding the latter against the light. Silk fabrics move with very few exceptions within the limits of 50 and 90 dents per inch. To learn the full number of dents required for the width of the cloth, simply multiply the dents per one inch with the width, adding a certain allowance for shrinkage. The edges, of course, must also be taken in consideration, and very often the dents that are taken up by the latter are used to counter-balance that shrinkage. 5. DRAWING-IN THE WARP IN HARNESS AND REED Here we must specify the number of dents that contain the same number of ends, and whether the latter are single or double, also the number of shafts and the method of drawing-in. [Page 71] 6. WARPING TICKET To make out the warping ticket, we need to ascertain the total number of ends, whether leased single or double, and the arrangement of the colors. 7. HARNESS ARRANGEMENT This is governed by the number of ends to be drawn in and the necessary shafts. If we have, for instance, 100 threads per inch to be drawn on 4 shafts, we must give each shaft 25 heddles per inch. There are generally between 25 and 45 heddles per inch on one shaft. 8. REDUCTION OF THE FILLING Here we state the number of picks per inch, give directions as to doubling, if such is necessary, and if more than one color or shuttle is used, the rotation thereof. 9. CALCULATION OF WARP AND FILLING The system adopted in this country for specifying the size of silk is based on the weight in drams (avoirdupois) of a skein containing 1000 yards. A skein, thus weighing 5 drams, is technically called 5-dram silk. The number of yards of 1-dram silk to a pound must accordingly be 256000. The formulas for figuring the amount of silk required for a piece of cloth are as follows: Warp Calculation _Multiply_: Number of ends×length×count ----------------------------- _Divide by_: 1000 yards×256 drams [Page 72] Filling Calculation _Multiply:_ Picks×xply×width×length of piece×count -------------------------------------- = lbs. _Divide by:_ 1000 yards×256 drams The result in both cases will be in pounds. The system of grading the silk which is in vogue in Europe, and which is employed by a number of mills on this side, is as follows: 1 skein of 500 meters, weighing 0,05 grams = 1 denier international or 1 " 476 " " 0,053 " = 1 " Turin system or 1 " 476 " " 0,051 " = 1 " Milan " The warp calculation, taking the international denier, would run: ends in warp×length×denier×0,05 gram -------------------------------------- _divided by:_ 500 meters for the filling: Picks per meter×xply×width×denier×0,05 gram --------------------------------------------- _divided by:_ 500 meters Result in metric weight, kilograms and grams. 10. FINISHING Give directions as to the process of finishing to which the goods are to be subjected, whether to be pressed, calendered, sized, moiréd, etc. 11. CALCULATION OF COST If all the foregoing conditions are ascertained, and a sample or a piece of the fabric executed, it remains to the manufacturer to determine the exact figure at which he can produce the article. That this must be done with great accuracy is naturally of the utmost importance, and the calculator [Page 73] must know in the first place the raw stock prices, and also be acquainted with the details of the manufacturing process and the rates of wages paid therein. As a rule, the manufacturer establishes a scale of prices covering all the items of labor cost, mill expenses, etc., and uses this as a basis for his calculations. A rule or formula for this operation cannot very well be given, as the methods vary in almost every establishment, each choosing the one best adapted to its ideas or dictates of circumstances and conditions. [Page 75] DISPOSITION 1 _Taffeta glacé_ [Illustration: Fig. 89] [Page 76] #Length and Width#--One piece 100 yards long, 18¾ inches wide. #Stock and Dye#--_Warp._--Ital. Organ., 24/26 deniers = 1,47 drams, brown, bright, 14/16 oz. _Filling._--Japan Tram, 28/30 deniers = 1,65 drams, gold, bright 14/16 oz. #Reed Calculation#--Per 1 inch, 70 dents at 3 single ends. " 18¾ " 1313 " add 13 " = 1% for shrinkage ---- Total 1326 dents. #Drawing in#--1st edge, 9 dents at 3 double ends. Ground, 1308 " at 3 single " 2d edge, 9 " at 3 double " on 6 shafts, straight through. #Warping Ticket#--1st edge, 27 double ends, brown. Ground, 3924 single " " 2d edge, 27 double " " ---- Total 4032 single ends. Length of warp 110 yards, including 10% for take up. #Harness#--6 shafts, 3978 heddles per 19 inches. 1 " 35 " " 1 " #Reduction of Filling#--Per inch, 100/102 picks, 2 ends. #Warp Calculation#--? lbs = 4032 ends. 1 end = 110 yards. 1000 yards = 1,47 drams. 256 drams = 1 lb. 100 = 104 (4% waste). 4032×110×1,47×104 ------------------- = 2,65 lbs., or 2 lbs. 10,4 oz. 1000×256×100 [Page 77] #Filling Calculation#--? lbs. = 100 yards 1 yard = 36 inches. 1 inch = 102 \ picks. 2 / ends. 1 pick = 19 inches. 36 inches = 1 yard 1000 yards = 1,65 drams. 256 drams = 1 lb. 100 = 108 (8% waste). 100×36×102×2×19×165×108 ------------------------- = 2,73 lbs., or 2 lbs. 11,7 ozs. 36×1000×256×100 * * * * [Page 79] DISPOSITION 2 _Surah 3-1_ [Illustration: Fig. 90] [Page 80] #Length and Width#--1 piece 50 yards long, 23½ in. wide. #Stock and Dyeing#--_Warp._--Ital. Organ., 1,30 drams = 20/24 deniers, black, bright, 40/50% = 22/24 ozs. _Filling._--Cotton No. 120/2 black. #Reed Calculation#--Per 1 inch, 80 dents at 2 single ends. " 23½ inch, 1880 " add 36 " = 2% for shrinkage. ---- Total 1916 dents. #Drawing-in#--1st edge, 8 dents, 2 double ends. Ground, 1900 " 2 single " 2d edge, 8 " 2 double " on 4 shafts, straight draw. #Warping Ticket#--1st edge, 16 double ends, black. Ground, 3800 single " " 2d edge, 16 double " " ---- Total 3864 single ends. Warp 54 yards long = 8% for take up. #Harness#--4 shafts, 3832 heddles per 24 inches. 1 " 40 " " 1 " #Reduction of Filling#--Per 1 inch, 120 picks, 1 end. #Warp Calculation#--? lbs. = 4264 ends. 1 end = 54 yards. 1000 yards = 1,30 drams. 256 drams = 1 lb. 100 = 104 (4% waste). 3864×54×1,30×104 ------------------ = 1,10 lbs., or 1 lb. 1,06 oz. 1000×256×100 [Page 81] #Filling Calculation#-?lbs. = 50 yards. 1 yard = 36 inches. 1 inch = 120 picks. 1 pick = 24 inches. 36 inches = 1 yard 840 yards = 1 skein. (No. 120/2) 60 skeins = 1 lb. 100 = 110 (10% waste). 50×36×120×24×110 ------------------ = 3.14 lbs., or 3 lbs. 2.24 ozs. 36×840×60×100 * * * * [Page 83] #DISPOSITION 3# _Satin Duchesse._ [Illustration: Fig. 91] [Page 84] #Length and Width#--One warp 300 yards long, 10 pieces of 60 yards 23 inches wide, 2 pieces in width, with one cut edge. #Stock and Dyeing#--_Warp._-- Ital. Organ., 1-55/100 drams, black, bright, 20/22 oz. _Filling._-- Jap. Tram., 1-8/10 and 2-7/10 drams, black, souple, 40/44 oz. We should use for this fabric 1 end filling, 5-thread, 4-5/10 drams, but as we have none of this size on hand, we take: 1 end, 2 thread, 1-8/10 drams, and 1 end, 3 thread, 2-7/10 drams. #Reed Calculation#--1 inch, 66 dents, 4 single ends. 46 " 3036 " 54 " (1¾% shrinkage). ---- Total ... 3090 dents. #Drawing-in#-- { 1st edge, { 2 dents, 6×2, black. { 13 " 4×2, white. Ground, 1514 " 4×1, black. { 2 " 6×2 " Cut Edge { 1 " 2×4, " { 3 " empty. { 1 " 2×4, " Ground, 1514 " 4×1, black. 2d edge, { 2 " 6×2, black. { 13 " 4×2, white. Satin on 8 shafts, straight draw. Cross-thread for split edge on 3 shafts, see design. #Warping Ticket#-- Edge, { 12/2 black. } { 52/2 white. } Ground, 6056/1 black. } twice over. Edge, { 52/2 white. } { 12/2 black. } 12208 ends black, { 318 yards long. 416 " white, { = 6% shrinkage. 2/4 black for ground thread, 300 yards long. 2/4 " " whip " 360 " " each one on a separate little roll. [Page 85] #Harness#--8 shafts, 12368 heddles, 47 in 1 " 33 " 1 " for the split edge 3 shafts, of which one has only half a heddle. #Filling#--Per 1 in., 80 picks, 2 ends (as described before). #Warp Calculation#--? lbs. = 12224 ends, black (416 white). 1 end = 318 yards. 1,000 yards = 1,55 drams. 256 drams = 1 lb. 100 = 104 (4% waste). (416) 12224×318×1.55×104 -------------------- = 24,477 lbs. org. black. 1000×256×100 = 0,833 " " white. #Filling Calculation#--? lbs. = 300 yards. 1 yard = 36 inches. 1 inch = 80 picks. 1 pick = 47 inches. 36 inches = 1 yard. 1000 yards = 4,5 drams. 256 drams = 1 lb. 100 = 108 (8% waste). 300×36×80×47×4,5×108 ---------------------- = 21,414 lbs. 36×1000×256×100 * * * * [Page 87] DISPOSITION 4 _Armure Satinée_ [Illustration: Fig. 92] [Page 88] #Length and Width#--One piece 60 yards long, 19 in. wide. #Stock and Dyeing#--_Warp._--Jap. Organ., 1,48 drams, black, bright, 18/20 oz. _Filling._--3 threads Jap. Tram., 2,95 drams, black, bright, 24/26 oz. #Reed Calculation#--Per 1 inch, 60 dents×4 single ends. " 19 " 1140 " 32 " (3% for shrinkage). ---- Total . . . 1172 dents. #Drawing-in#--1st edge, 12 dents × 4 double. Ground, 1148 " × 4 single. 2d edge, 12 " × 4 double. on 12 shafts, straight through, or on 6 shafts, as design indicates. #Warping Ticket#--1st edge, 48/2 black. Ground, 4592/1 " 2d edge, 48/2 " ------ Total . . . 4784 single ends 64 yards long. =6½% for take up. #Harness#--6 shafts, 4688 heddles per 19½ inches. 1 " 40 " " 1 " #Reduction of Filling#--Per 1 inch, 104 picks, 2 ends. #Warp Calculation#--? lbs. = 4784 ends. 1 end = 64 yards. 1000 yards = 1,48 drams. 256 drams = 1 lb. 100 = 104 (4% waste). 4784×64×1,48×104 ------------------ = 1,84 lbs., or 1 lb. 13,44 ozs. 1000×256×100 [Page 89] #Filling Calculation#--? lbs. = 60 yards. 1 yard = 36 inches. 1 inch = 104 } picks. 2 } ends. 1 pick = 19½ inches. 36 inches = 1 yard. 1000 yards = 2,95 drams. 256 drams = 1 lb. 100 = 108 (8% waste). 60×36×104×2×19,5×2,95×108 --------------------------- = 3,03 lbs., or 3 lbs. 0,48 ozs. 36×1000×256×100 * * * * [Page 91] DISPOSITION 5 _Surface Printed Armure._ [Illustration: Fig. 93] [Page 92] #Length and Width#--One piece 50 yards long, 18½ in. wide. #Stock and Dyeing#--_Warp._--Ital. Organ., 1,50 drams, 24/28 deniers, white bright, pure dye. _Filling._--5 thread Ital. Tram., 4 drams, 13/14 deniers, white, bright, pure dye. #Reed Calculation#--Per 1 inch, 52 dents, 2×2. " 18½ " 962 " 20 " (2% shrinkage). ---- Total . . . 982 dents. #Drawing-in#--1st edge, 7 dents, 4×2 gros de Tours. Ground, 968 " 2×2 armure 2d edge, 7 " 4×2 gros de Tours. Armure ground on 12 shafts, straight draw. Gros de Tours, edges on 4 shafts. #Warping Ticket#--Ground warp, 54 yards. 1936/2 white. Gros de Tours edges, 55 yards. 2×28/2 white, on separate rolls. Total . . . 3984 single ends. #Harness#--12 shafts, 1936 heddles, per 18½ inches. 1 " 8-2/3 " " 1 " 4 Shafts gros de Tours edges, with 28 heddles on each side. #Reduction of Filling#--Per 1 inch, 96 picks, 1 end. #Warp Calculation#--? lbs. = 3984 ends. 1 end = 54 yards. 1000 yards = 1,50 drams. 256 drams = 1 lb. 100 = 104 (4% waste). 3984×54×1,50×104 ------------------ = 1,31 lbs., or 1 lb. 4,96 ozs. 1000×256×100 [Page 93] #Filling Calculation#--? lbs. = 50 yards. 1 yard = 36 inches. 1 inch = 96 picks. 1 pick = 19 inches. 36 inches = 1 yard. 1000 yards = 4 drams. 256 drams = 1 lb. 100 = 108 (8% waste). 50×36×96×19×4×108 ------------------- = 1,54 lbs., or 1 lb. 8,64 ozs. 36×1000×256×100 After weaving, the small flower effects have to be printed on the cloth. * * * * [Page 95] DISPOSITION 6 _Pekin_: 8 shaft satin and repp. [Illustration: Fig. 34] [Page 96] #Length and Width#--1 piece 100 yards long, 20¼ in. wide. { Ital. Organ., 1-35/100 drams, black, { bright, 20/22 oz. #Stock and Dyeing#--_Warp._ { Ital. Organ., 1-15/100 drams, sky, { bright, pure dye { Cotton No. 100/2, scarlet. _Filling._--3 threads, Jap. Tram., 2-8/10 drams, scarlet, bright, 14/16 oz. {6×1, black satin #Reed Calculation#--Per 1 inch, 68 dents, {6×2, colored " {2×1, " repp. " 20¼ " 1377 " 23 " (1½% for shrinkage). ---- Total 1400 dents. #Drawing-in#--1st edge, 7 dents, 6×2 satin. } Ground, 34 " 6×1 " } 2 " 6×2 " } 10 " 6×1 " } twice } 2 " 2×1 repp. } over. } 10 " 6×1 satin. } 2 " 6×2 " } 39 " 6×1 " } 5 " 2×1 repp. } twice } 4 " 6×1 satin. } over. } 7 times 5 " 2×1 repp. } over. 15 " 6×1 satin. } 2 " 2×1 repp. } 15 " 6×1 satin. } 5 " 2×1 repp. } twice } 4 " 6×1 satin. } over. } 5 " 2×1 repp. } 5 " 6×1 satin. } 28 " 6×1 " } 2d edge, 7 " 6×2 " } Satin on 1st section of 8 shaft skip draw. Binder " 2nd " " 2 " Repp " 3d " " 2 " [Page 97] On each side of every repp stripe two ends of the satin warp must be entered on the 2 binder shafts (2d section), to prevent the ends of the satin to slide over into the repp stripes. #Warping Ticket#--I. _Beam satin_, 106 yards. 1st edge, 42/2 black. Ground, 204/1 " } 12/2 sky. } 180/1 black. } 12/2 sky. } 234/1 black. } 48/2 sky. } 7 times over. 180/1 black. } 48/2 sky. } 30/1 black. } 168/1 " } 2d edge, 42/2 " } 6132 single ends black. 1680 " " sky. II. _Beam repp_, 110 yards. 4/1 scarlet. } 4/1 " } 10/1 " } 10/1 " } 10/1 " } 7 times over. 4/1 " } 10/1 " } 10/1 " } 10/1 " } 504 single ends scarlet cotton This warp has to be beamed in stripes. Make out a diagram for the warper the same as shown in Fig. 95. [Page 98] [Illustration: Fig. 95] #Harness#--Fig. 95 shows how to make a diagram of a harness for a Pekin. The heddles are marked per one shaft. As the repp stripes are only small ones, we use for the satin a full harness, that is, one without open spaces for the repp stripe. All together we have in the satin warp 6888 single and double ends to draw in; of these 252 ends are used for binders, on both sides of the repp stripes. Thus remain for 8 shafts, 6636 heddles per 20½ inches 1 " 40 " " 1 " #Reduction of Filling#--Per 1 inch, 144 picks, 1 end. #Warp Calculation#--? lbs. = 6132 ends (1680 ends sky). 1 end = 106 yards. 1000 yards = 1,35 drams (sky 1,15 drams). 256 drams = 1 lb. 100 = 104 (4% waste). 6132×106×1,35×104 ------------------- = 3,56 lbs. for black, or 3 lbs. 8,96 ozs. 1000×256×100 1680×106×1,15×104 ------------------- = 0,83 lbs. for sky, or 0 lbs. 13,28 ozs. 1000×256×100 [Page 99] ? lbs. = 504 ends. 1 end = 110 yards. 840 yards = 1 skein. (No. 100/2) 50 skeins = 1 lb. 100 = 104 (4% waste). 504×110×104 ------------- = 1,37 lbs. scarlet cotton, or 1 lb. 5,92 ozs. 840×50×100 #Filling Calculation#--? lbs. = 100 yards. 1 yard = 36 inches. 1 inch = 144 picks. 1 pick = 21 inches. 36 inches = 1 yard. 1000 yards = 2,8 drams. 256 drams = 1 lb. 100 = 108 (8% waste). 100×36×144×21×2,8×108 ----------------------- = 3,57 lbs., or 3 lbs. 9,12 ozs. 36×1000×256×100 * * * * * [Page 100] JACQUARD WEAVES Jacquard weaves usually show on a plain ground figure or flower effects. To obtain these effects the ground is made of one weave, say taffeta, while the figures or flowers are produced in another weave, say satin. We enter the warp through a jacquard harness, and according to the repeat use a 200, 400, 600, 900, 1200, etc., hook jacquard machine, which means 200, 400, 600, 900 and 1200 ends per repeat. With a 600-hook machine a larger repeat can be produced than with a 499-hook machine. For instance, if we want to make a cloth the figures of which are to be two inches apart, it is a two-inch repeat, and use the count of 50/4 or 200 ends per inch, we can use a 400-hook machine, 2 in. x 200 ends. But we can make this cloth also on a 1200-hook machine, only the repeat must be designed three times. The advantage of using a 1200-hook machine with the count 50/4 is that 2, 3, 4, 6-inch repeats can be produced, while with a 400-hook machine, only a 2-inch repeat can be made. There is no end to all the different weaves and the possible flower and other pattern effects that can be made with the jacquard machine. For a jacquard weaving plant the designing is the most important factor. * * * * * BOX LOOM WEAVES INCLUDING CREPES Box looms are required for weaves such as bayadères, checks, plaids (see pages 63-65), bengalines, crêpes, etc., where two or more shuttles are needed to bring out the effect. For the crêpes (crêpe de chine, crêpe georgette) only two shuttles are needed, while plaids and other articles are made with more shuttles. To weave such articles the loom or the lay must be fitted with two or more shuttle boxes on one or both sides of the loom. [Page 101] If a manufacturer decides to change plain looms to box looms or buy new box looms, it is wise to get 4 × 4 boxes, or four shuttle boxes on each side. With these looms about everything can be made that is called for in box-loom effects, and as styles change, it is wise to be prepared. * * * * * MANUFACTURING COSTS The calculator first ascertains for the warp: What silk will be used, the cost of the same, total number of ends in the warps for the amount of silk, cost of throwing, dyeing, winding, warping, twisting, entering, and weaving. Then the filling: Silk to be used, how much, cost of silk, cost of throwing, dyeing, winding, doubling, quilling. After this determine the cost of weaving, cloth picking, finishing, factory costs, and selling expenses. To-day most of the operations are paid by "piece work." The calculator must always take into consideration that poor raw silk or poor dyeing make production slow, increase the cost of labor, and also that more waste will be made. THROWING: Regular organ usually has 16 turns per inch in the first twist and 14 turns to the inch in the second or reverse twist. Tram receives only one twisting, about three turns to the inch. As the warp twisting-in is paid for at so much per hundred or thousand ends, no matter how short or long the warp is, it is a saving to make the warps as long as possible, especially in raw, black and staple colors. The calculator must not forget the cost of entering the first warp in a harness, also the reeding. Most mills figure the cost of harness and reed in the expense accounts. If plain and fancy goods are made an extra percentage should be figured for the latter. [Page 102] EXPENSES are figured differently, as almost every manufacturer has his own system. If a mill makes only a few staple articles it is easy to put down the cost of expenses. Say the mill has a production of 500,000 yards per year, that the expense amounts to $35,000, the cost then is 7 cents per yard. Manufacturers making all kinds of goods sometimes figure the expenses in percentage, say, for plain goods, with a few picks, like gros-grain, peau de soie, etc., 10 per cent. per yard. Taffeta, satin, etc., having more picks, 12½ per cent. per yard, and fancy and jacquard goods, 15 per cent. per yard. In the expense account we include all charges except raw silk, throwing, dyeing and piece work. SELLING EXPENSES. Before a calculation is finished we must add the selling expenses to the cost, also take account of the trade discount. Small mills usually sell through a commission house, which pays all expenses and charges a certain commission. Many large firms have their own selling end, and some have their sales guaranteed by a commission house or a bank. [Page 103] CALCULATIONS The prices marked in the following calculations are about as in "normal times." Absolutely correct piece work prices cannot be given as different localities have different prices. Calculations are usually made per 100 yards, 100-meter warps. Most goods gain from 3 to 7 per cent. in weaving. That is, if we make a warp of 300 meters for a satin and we obtain 315 yards of cloth, this gain should not be calculated, as usually there is no account taken of samples used in the selling department. But the loss in length should be figured and taken account of on goods with a heavy rib, such as moiré, faille, etc. DISP. 7--A 3 1/3-inch repeat can be obtained with a 600-hook jacquard machine, seven repeats in a width of 23 inches. DISP. 8--Taffeta weave, but the two cotton picks must go in one hole. This article can only be made with at least two shuttle boxes on each side. For warping use a single and double cross reed, heavy cotton, no knots must be tied. DISP. 10--This article must be warped with as much tension as possible and no knots should be tied in. Silk is to be delivered on bobbins from throwster. CANTON CREPE DISP. 9--Can also be made with Canton silk for filling and may be called Canton crêpe. As Canton silk is much cheaper than Japan, the manufacturer can use 4-thread Canton instead of 3-thread Japan for filling at a little difference in cost, thus the cloth will be heavier, but Canton silk is not as even and clean as Japan. [Page 104] Article--TAFFETA GLACE Reed 70/3 Disp. 1 Width 18¾ in. Warp--Ital. Ex. Class 12/14 $5.00 raw silk .60 throwing 2-Thread Organ. brown bright .45 dyeing 16-oz. .15 winding ----- raw lbs. 2.60 $6.20 $16.23 Warping--4032 at 3¢. 1.21 Twisting--3978 at 25¢. per 300 meters .33 Filling--Jap. Tram. Best No. 1 13/15 $4.25 raw silk .45 throwing 2/2 ends 104 picks .45 dyeing .15 winding gold bright 16 oz. .15 doubling .10 quilling ----- raw lbs. 2.73 $5.55 15.02 Weaving 7.00 Picking 1.00 Finishing 1.00 Expenses 7.00 ------ $48.79 5% trade discount 7½% selling commission Divide by 87½ Cost per yard = $0.5576 * * * * Article--SURAH 3-1 Reed 80/2 Disp. 2 Width 36 in. Warp--Ital. Ex. Class. 10/12 $5.20 .65 2-Thread Organ. bright black .81 discount 15% 24 oz. .30 dyed 20% ----- lbs. 3.36 $6.96 $23.39 Warping--5904 at 2¾¢. 1.62 Twisting--5872 at 35¢.--600 lb. warp .25 Filling--cotton 120/1 $1.25 .10 dye black 1 end 120 picks .08 winding .07 quilling ----- lbs. 9.50 $1.50 14.25 Weaving 12.00 Picking 1.50 Finishing 2.00 Expenses 7.00 ----- $62.01 5% discount 6% commission Divide by 89 Cost per yard = $0.6967 * * * * [Page 105] Article--SATIN DUCHESSE Reed 66/4 Disp. 3 Width 2 x 23 in. Warp--Ital. Ex. Class. 12/14 $5.00 .60 2-Thread Organ. black bright .73 22 oz. .21 ----- lbs. 8.50 $6.54 $55.59 Warping--12624 at 2¾¢. 3.47 Twisting--12256 at 25¢. 600 meters .51 Filling--Jap. Tram No. 1--14/16 $4.00 .40 black souple 44 oz. 1.60 net .40 1/2 and 1/3 = 1/5 80 picks .40 doubling .30 ----- lbs. 7.14 $7.10 50.69 Weaving 13.00 Picking 2.00 Finishing 2.50 Expenses 8.00 ------- $135.76 Divide by 89 Cost per yard = $0.7627 * * * * Article--ARMURE SATIN Reed 60/4 Disp. 4 Width 26 in. STOCK AND DYE Warp--Jap. Ex. 12/14 $4.75 .60 2-Thread Organ. black bright .64 20 oz. .19 ----- lbs. 4.30 $6.18 $26.57 Warping--6520 at 2¾¢. 1.79 Twisting--6424 at 25¢. 600 meters .27 Filling--Jap. Tram No. 1 16/18 $4.00 .30 black bright 26 oz. .94 .25 2/3 ends 104 picks .25 .17 ----- lbs. 6.80 $5.91 40.19 Weaving 10.00 Picking 1.00 Finishing 1.00 Expenses 7.00 ------ $87.82 Divide by 89 Cost per yard = $0.9867 * * * * [Page 106] Article--PRINTED ARMURE Reed 52/2/2 Disp. 5 Width 18½ in. STOCK AND DYE Warp--Ital. Ex. Class. 12/14 $5.00 2-Thread Organ. white bright .60 P.D. .23 .12 ----- lbs. 2.62 $5.95 $15.59 Warping--3984/1 at 3¢. 1.20 Twisting--1992/2 at 30¢. 300 meters .20 Filling--Ital. Tram. souple 13/14 $4.50 .30 white bright P.D. .23 .10 1/5 end 96 picks .07 ----- lbs. 3.08 $5.20 16.02 Weaving 8.00 Picking 1.00 Finishing and Printing 5.00 Expenses 8.00 ------ $55.01 Divide by 87½ Cost per yard = $0.6287 * * * * [Page 107] Article--SATIN STRIPED REPS Reed 60/62 Disp. 6 Width 20¼ in. STOCK AND DYE Warp--Ital. Ex. Organ. 24/26 $5.00 black bright 22 oz. .60 .73 .21 ----- lbs. 3.56 $6.54 $23.28 Ital. Ex. Organ. 18/20 $5.20 .65 sky bright P.D. .23 .12 ----- lbs. .83 $6.20 5.15 Cotton 100/2 $1.00 .12 .08 ----- scarlet lbs. 1.37 $1.20 1.64 Warping--8316 at 4¢. 3.32 Twisting--7434 at 50¢. 300 meters 1.24 Filling--Jap. tram. No. 1 14/16 $4.00 .35 scarlet bright 16 oz. 1/3 ends .45 .15 144 picks. lbs. 3.57 .10 ----- $5.05 18.04 Weaving 12.00 Picking 1.00 Finishing 1.00 ------ $66.67 Expenses 15% 10.00 ------ $76.67 Divide by 87½ Cost per yard = $0.8763 * * * * [Page 108] Article--MESSALINE BROCADE Reed 60/3 Disp. 7 Width 23 in. Warp--Jap. Ex. 13/15 $4.50 .60 2-Thread navy bright 16 oz. .45 .15 ---- lbs. 3.20 $5.70 $18.24 Warping--4320 at 3¢. 1.30 Twisting--4260 at 30¢. 300 meters .41 Filling--Jap. Tram No. 1 13/15 $4.00 .35 emerald ex. bright dye 24 oz. .95 .25 1/3 ends 100 picks .15 ----- lbs. 2.50 $5.70 14.25 Weaving 9.00 Picking 1.00 Finishing 1.00 ------ $45.20 Expenses 15% 6.78 ------ $51.98 Divide by 87½ Cost per yard = $0.5941 * * * * Article--BENGALINE Reed 72/2 by 1 single; 1 double Disp. 8 Width 36 in. Warp--Jap. ex. 13/15 $4.50 .60 2-Thread Organ. black bright .64 20 oz. .19 ----- lbs. 5.77 $5.93 $34.22 Warping--7964 at 2¾¢. 2.19 Twisting--5296 at 30¢. 600 meters .27 Filling--56 picks by $4.50 5 organ. 2 Cotton .60 .64 .19 .45 .12 .10 ----- 40 picks Organ. as warp $6.05 .08 6.05 lbs. 1 .07 16 picks black cotton 15/4 ----- lbs. 22.50 $ .70 15.75 Weaving 12.00 Picking 1.50 Finishing 3.00 Expenses 8.00 ------ $82.98 Divide by 91 Cost per yard = $0.9119 * * * * [Page 109] Article--CREPE DE CHINE (Taffeta weave) Reed 60/2/2 Disp. 9 Width 40 in. 44½ in. in reed Warp--Jap. Ex. Grege 20/22 $4.50 .05 winding ----- 2% waste lbs. 5.60 $4.55 $25.48 Warping--5340/2 at 2½¢. 2.67 Twisting--5340/2 at 25¢. 600 meters .23 Filling--Jap. No. 1 13/15 4 ends hard twist 60 turns $4.00 1.25 throwing 84 picks by 2 right, 2 left 0.05 quilling twist ----- 25% waste and shrinkage $5.30 lbs. 6.00 31.80 Weaving 9.00 Finishing and dyeing 5.00 Picking 1.00 Expenses 7.00 ------ $82.18 5% discount 5% selling expense Divide by 90 Cost per yard = $0.9131 * * * * Article--CREPE GEORGETTE Reed 50/2 (Taffeta weave) by 1 right, 1 left twist Disp. 10 Width 40 in. 47 in. in reed Warp--Ital. Ex. Class 16/18 Raw $5.20 1.60 ----- 2-Thread hardtwist 75 turns $6.80 $36.72 30% shrinkage and waste lbs. 5.40 Warping--4640/1 30/2 4760 at 4¢. 1.90 Twisting--4700 at 50¢. 600 meters .40 Filling--Same silk as warp 100 picks by 2 right, 2 left twist $5.20 1.60 .10 ---- lbs. 5.00 $6.90 34.50 Weaving 15.00 Picking 1.00 Finishing and dyeing 6.00 ------ $95.52 Expenses 12½% 11.94 ------- $107.46 Divide by 87½ Cost per yard = $1.2281 [Page 110] CALCULATION BLANK ARTICLE_____________________________________REED_____________________ DISP________________________________________WIDTH____________________ WARP_________________________________________________________________ | | | | | --------------------------------------------|---|---|---|---|-------- | | | | | --------------------------------------------|---|---|---|---|-------- | | | | | --------------------------------------------|---|---|---|---|-------- | | | | | WARPING_____________________________________|___|___|___|___|________ | | | | | TWISTING____________________________________|___|___|___|___|________ | | | | | FILLING_____________________________________|___|___|___|___|________ | | | | | ____________________________________________|___|___|___|___|________ | | | | | WEAVING_____________________________________|___|___|___|___|________ | | | | | PICKING_____________________________________|___|___|___|___|________ | | | | | FINISHING___________________________________|___|___|___|___|________ | | | | | EXPENSES____________________________________|___|___|___|___|________ | | | | | | | | | | --------------------------------------------+---+---+---+---+-------- PRICE PER YARD [Page 111] INDEX DRAWING-IN, 7 Straight Draws, 7 Skip Draws, 9 Point Draws, 9 Section Draws, 10 THE WEAVES AND THEIR CONSTRUCTION, 15 The Taffeta Weave, 17 Gros de Tours Weaves, 19 Serge Weaves, 20 Twill Weaves, 20 FILLING EFFECTS 21 Satin de Lyon, 21 Levantine, 21 Polonaise, 22 Serge grosse coté, 22 Serge Romaine, 23 Serge, 23 WARP EFFECTS, 25 Levantine, 25 EVENSIDED TWILLS, 26 Surah, 26 Croise, 26 POINTED TWILLS, 27 SATIN WEAVES, 32 Satine de Chine, 34 Satin Merveilleux, 34 7 Harness Satin, 35 Duchesse, 35 IRREGULAR SATINS, 39 Satin Ture, 39 Satin à la Reine, 40 DERIVATIVE WEAVES, 41 From the Taffeta, 41 From the Twills, 43 From the Satin Weave, 46 Cannele and Repp Weaves, 49 DOUBLE FACED FABRICS, 55 Warp Effects, 55 FILLING EFFECTS, 58 Pekins, 60 Bayadères, 63 [Page 112] Checks and Plaids, 65 DECOMPOSITION, 67 The Weave, 68 Length and Width of the Fabric, 68 The Stock and Its Dye, 69 Reed Calculation, 70 Drawing-in the Warp in Harness and Reed, 70 Warping Ticket, 71 Harness Arrangement, 71 Reduction of the Filling, 71 Calculation of Warp and Filling, 71 Finishing, 72 Calculation of Cost, 72 DISPOSITIONS, 75 JACQUARD WEAVES, 100 Box Loom Weaves Including Crêpes, 100 Manufacturing Costs, 101 CALCULATIONS, 103 Calculation Blank, 110 [Page 113] OTHER BOOKS Published by CLIFFORD & LAWTON 373 Fourth Avenue New York. * * * * * THE AMERICAN SILK JOURNAL Established 1882. A monthly magazine devoted exclusively to dress silks, ribbons, and all silken materials, reflecting the progress of mill and market, fashions, trade events and news. Published on the first of each month. Subscription: United States, $3; Canada, $3.50; Foreign, $4 a year. SERIVALOR or the True Value of Raw Silk By ADOLF ROSENZWEIG, The great international authority on silk. A practical and logical system of standardizing raw silks. Price, $4.25 postpaid. DICTIONARY OF SILK TERMS The most complete and authentic dictionary ever published on silk terms, from the raw silk to the finished broad and narrow silks, including weaves, styles, patterns, effects, colors, trade-marks, etc. Bound in cloth, 93 pages, price, $1.50 postpaid. COLOR VALUE By C.R. CLIFFORD. A valuable book treating on color contrasts and harmonies. It will assist the manufacturer, styler, designer and retailer in the selection of colors. Colored plates and diagrams illustrating the fundamental principles of the subject, of inestimable value to either student or artisan. Price, $1.50 postpaid. PERIOD FURNISHINGS By C.R. CLIFFORD An encyclopedia of furnishings, decorations, furniture. Contains 2,731 illustrations, 266 pages, size 9¼ x 12; 112 fabric illustrations, covering all periods. Price, $6.00 postpaid. End of Project Gutenberg's Theory Of Silk Weaving, by Arnold Wolfensberger *** END OF THIS PROJECT GUTENBERG EBOOK THEORY OF SILK WEAVING *** ***** This file should be named 14600-8.txt or 14600-8.zip ***** This and all associated files of various formats will be found in: https://www.gutenberg.org/1/4/6/0/14600/ Produced by Stan Goodman, Keith Edkins and the PG Online Distributed Proofreading Team Updated editions will replace the previous one--the old editions will be renamed. Creating the works from public domain print editions means that no one owns a United States copyright in these works, so the Foundation (and you!) can copy and distribute it in the United States without permission and without paying copyright royalties. Special rules, set forth in the General Terms of Use part of this license, apply to copying and distributing Project Gutenberg-tm electronic works to protect the PROJECT GUTENBERG-tm concept and trademark. Project Gutenberg is a registered trademark, and may not be used if you charge for the eBooks, unless you receive specific permission. If you do not charge anything for copies of this eBook, complying with the rules is very easy. You may use this eBook for nearly any purpose such as creation of derivative works, reports, performances and research. They may be modified and printed and given away--you may do practically ANYTHING with public domain eBooks. Redistribution is subject to the trademark license, especially commercial redistribution. *** START: FULL LICENSE *** THE FULL PROJECT GUTENBERG LICENSE PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK To protect the Project Gutenberg-tm mission of promoting the free distribution of electronic works, by using or distributing this work (or any other work associated in any way with the phrase "Project Gutenberg"), you agree to comply with all the terms of the Full Project Gutenberg-tm License (available with this file or online at https://gutenberg.org/license). Section 1. General Terms of Use and Redistributing Project Gutenberg-tm electronic works 1.A. By reading or using any part of this Project Gutenberg-tm electronic work, you indicate that you have read, understand, agree to and accept all the terms of this license and intellectual property (trademark/copyright) agreement. If you do not agree to abide by all the terms of this agreement, you must cease using and return or destroy all copies of Project Gutenberg-tm electronic works in your possession. If you paid a fee for obtaining a copy of or access to a Project Gutenberg-tm electronic work and you do not agree to be bound by the terms of this agreement, you may obtain a refund from the person or entity to whom you paid the fee as set forth in paragraph 1.E.8. 1.B. "Project Gutenberg" is a registered trademark. It may only be used on or associated in any way with an electronic work by people who agree to be bound by the terms of this agreement. There are a few things that you can do with most Project Gutenberg-tm electronic works even without complying with the full terms of this agreement. See paragraph 1.C below. There are a lot of things you can do with Project Gutenberg-tm electronic works if you follow the terms of this agreement and help preserve free future access to Project Gutenberg-tm electronic works. See paragraph 1.E below. 1.C. The Project Gutenberg Literary Archive Foundation ("the Foundation" or PGLAF), owns a compilation copyright in the collection of Project Gutenberg-tm electronic works. Nearly all the individual works in the collection are in the public domain in the United States. If an individual work is in the public domain in the United States and you are located in the United States, we do not claim a right to prevent you from copying, distributing, performing, displaying or creating derivative works based on the work as long as all references to Project Gutenberg are removed. Of course, we hope that you will support the Project Gutenberg-tm mission of promoting free access to electronic works by freely sharing Project Gutenberg-tm works in compliance with the terms of this agreement for keeping the Project Gutenberg-tm name associated with the work. You can easily comply with the terms of this agreement by keeping this work in the same format with its attached full Project Gutenberg-tm License when you share it without charge with others. 1.D. The copyright laws of the place where you are located also govern what you can do with this work. Copyright laws in most countries are in a constant state of change. If you are outside the United States, check the laws of your country in addition to the terms of this agreement before downloading, copying, displaying, performing, distributing or creating derivative works based on this work or any other Project Gutenberg-tm work. The Foundation makes no representations concerning the copyright status of any work in any country outside the United States. 1.E. Unless you have removed all references to Project Gutenberg: 1.E.1. The following sentence, with active links to, or other immediate access to, the full Project Gutenberg-tm License must appear prominently whenever any copy of a Project Gutenberg-tm work (any work on which the phrase "Project Gutenberg" appears, or with which the phrase "Project Gutenberg" is associated) is accessed, displayed, performed, viewed, copied or distributed: This eBook is for the use of anyone anywhere at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org 1.E.2. If an individual Project Gutenberg-tm electronic work is derived from the public domain (does not contain a notice indicating that it is posted with permission of the copyright holder), the work can be copied and distributed to anyone in the United States without paying any fees or charges. If you are redistributing or providing access to a work with the phrase "Project Gutenberg" associated with or appearing on the work, you must comply either with the requirements of paragraphs 1.E.1 through 1.E.7 or obtain permission for the use of the work and the Project Gutenberg-tm trademark as set forth in paragraphs 1.E.8 or 1.E.9. 1.E.3. If an individual Project Gutenberg-tm electronic work is posted with the permission of the copyright holder, your use and distribution must comply with both paragraphs 1.E.1 through 1.E.7 and any additional terms imposed by the copyright holder. Additional terms will be linked to the Project Gutenberg-tm License for all works posted with the permission of the copyright holder found at the beginning of this work. 1.E.4. Do not unlink or detach or remove the full Project Gutenberg-tm License terms from this work, or any files containing a part of this work or any other work associated with Project Gutenberg-tm. 1.E.5. Do not copy, display, perform, distribute or redistribute this electronic work, or any part of this electronic work, without prominently displaying the sentence set forth in paragraph 1.E.1 with active links or immediate access to the full terms of the Project Gutenberg-tm License. 1.E.6. You may convert to and distribute this work in any binary, compressed, marked up, nonproprietary or proprietary form, including any word processing or hypertext form. However, if you provide access to or distribute copies of a Project Gutenberg-tm work in a format other than "Plain Vanilla ASCII" or other format used in the official version posted on the official Project Gutenberg-tm web site (www.gutenberg.org), you must, at no additional cost, fee or expense to the user, provide a copy, a means of exporting a copy, or a means of obtaining a copy upon request, of the work in its original "Plain Vanilla ASCII" or other form. Any alternate format must include the full Project Gutenberg-tm License as specified in paragraph 1.E.1. 1.E.7. Do not charge a fee for access to, viewing, displaying, performing, copying or distributing any Project Gutenberg-tm works unless you comply with paragraph 1.E.8 or 1.E.9. 1.E.8. You may charge a reasonable fee for copies of or providing access to or distributing Project Gutenberg-tm electronic works provided that - You pay a royalty fee of 20% of the gross profits you derive from the use of Project Gutenberg-tm works calculated using the method you already use to calculate your applicable taxes. The fee is owed to the owner of the Project Gutenberg-tm trademark, but he has agreed to donate royalties under this paragraph to the Project Gutenberg Literary Archive Foundation. Royalty payments must be paid within 60 days following each date on which you prepare (or are legally required to prepare) your periodic tax returns. Royalty payments should be clearly marked as such and sent to the Project Gutenberg Literary Archive Foundation at the address specified in Section 4, "Information about donations to the Project Gutenberg Literary Archive Foundation." - You provide a full refund of any money paid by a user who notifies you in writing (or by e-mail) within 30 days of receipt that s/he does not agree to the terms of the full Project Gutenberg-tm License. You must require such a user to return or destroy all copies of the works possessed in a physical medium and discontinue all use of and all access to other copies of Project Gutenberg-tm works. - You provide, in accordance with paragraph 1.F.3, a full refund of any money paid for a work or a replacement copy, if a defect in the electronic work is discovered and reported to you within 90 days of receipt of the work. - You comply with all other terms of this agreement for free distribution of Project Gutenberg-tm works. 1.E.9. If you wish to charge a fee or distribute a Project Gutenberg-tm electronic work or group of works on different terms than are set forth in this agreement, you must obtain permission in writing from both the Project Gutenberg Literary Archive Foundation and Michael Hart, the owner of the Project Gutenberg-tm trademark. Contact the Foundation as set forth in Section 3 below. 1.F. 1.F.1. Project Gutenberg volunteers and employees expend considerable effort to identify, do copyright research on, transcribe and proofread public domain works in creating the Project Gutenberg-tm collection. Despite these efforts, Project Gutenberg-tm electronic works, and the medium on which they may be stored, may contain "Defects," such as, but not limited to, incomplete, inaccurate or corrupt data, transcription errors, a copyright or other intellectual property infringement, a defective or damaged disk or other medium, a computer virus, or computer codes that damage or cannot be read by your equipment. 1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the "Right of Replacement or Refund" described in paragraph 1.F.3, the Project Gutenberg Literary Archive Foundation, the owner of the Project Gutenberg-tm trademark, and any other party distributing a Project Gutenberg-tm electronic work under this agreement, disclaim all liability to you for damages, costs and expenses, including legal fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE PROVIDED IN PARAGRAPH F3. YOU AGREE THAT THE FOUNDATION, THE TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH DAMAGE. 1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a defect in this electronic work within 90 days of receiving it, you can receive a refund of the money (if any) you paid for it by sending a written explanation to the person you received the work from. If you received the work on a physical medium, you must return the medium with your written explanation. The person or entity that provided you with the defective work may elect to provide a replacement copy in lieu of a refund. If you received the work electronically, the person or entity providing it to you may choose to give you a second opportunity to receive the work electronically in lieu of a refund. If the second copy is also defective, you may demand a refund in writing without further opportunities to fix the problem. 1.F.4. Except for the limited right of replacement or refund set forth in paragraph 1.F.3, this work is provided to you 'AS-IS' WITH NO OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR ANY PURPOSE. 1.F.5. Some states do not allow disclaimers of certain implied warranties or the exclusion or limitation of certain types of damages. If any disclaimer or limitation set forth in this agreement violates the law of the state applicable to this agreement, the agreement shall be interpreted to make the maximum disclaimer or limitation permitted by the applicable state law. The invalidity or unenforceability of any provision of this agreement shall not void the remaining provisions. 1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the trademark owner, any agent or employee of the Foundation, anyone providing copies of Project Gutenberg-tm electronic works in accordance with this agreement, and any volunteers associated with the production, promotion and distribution of Project Gutenberg-tm electronic works, harmless from all liability, costs and expenses, including legal fees, that arise directly or indirectly from any of the following which you do or cause to occur: (a) distribution of this or any Project Gutenberg-tm work, (b) alteration, modification, or additions or deletions to any Project Gutenberg-tm work, and (c) any Defect you cause. Section 2. Information about the Mission of Project Gutenberg-tm Project Gutenberg-tm is synonymous with the free distribution of electronic works in formats readable by the widest variety of computers including obsolete, old, middle-aged and new computers. It exists because of the efforts of hundreds of volunteers and donations from people in all walks of life. Volunteers and financial support to provide volunteers with the assistance they need, is critical to reaching Project Gutenberg-tm's goals and ensuring that the Project Gutenberg-tm collection will remain freely available for generations to come. In 2001, the Project Gutenberg Literary Archive Foundation was created to provide a secure and permanent future for Project Gutenberg-tm and future generations. To learn more about the Project Gutenberg Literary Archive Foundation and how your efforts and donations can help, see Sections 3 and 4 and the Foundation web page at https://www.pglaf.org. Section 3. Information about the Project Gutenberg Literary Archive Foundation The Project Gutenberg Literary Archive Foundation is a non profit 501(c)(3) educational corporation organized under the laws of the state of Mississippi and granted tax exempt status by the Internal Revenue Service. The Foundation's EIN or federal tax identification number is 64-6221541. Its 501(c)(3) letter is posted at https://pglaf.org/fundraising. Contributions to the Project Gutenberg Literary Archive Foundation are tax deductible to the full extent permitted by U.S. federal laws and your state's laws. The Foundation's principal office is located at 4557 Melan Dr. S. Fairbanks, AK, 99712., but its volunteers and employees are scattered throughout numerous locations. Its business office is located at 809 North 1500 West, Salt Lake City, UT 84116, (801) 596-1887, email business@pglaf.org. Email contact links and up to date contact information can be found at the Foundation's web site and official page at https://pglaf.org For additional contact information: Dr. Gregory B. Newby Chief Executive and Director gbnewby@pglaf.org Section 4. Information about Donations to the Project Gutenberg Literary Archive Foundation Project Gutenberg-tm depends upon and cannot survive without wide spread public support and donations to carry out its mission of increasing the number of public domain and licensed works that can be freely distributed in machine readable form accessible by the widest array of equipment including outdated equipment. Many small donations ($1 to $5,000) are particularly important to maintaining tax exempt status with the IRS. The Foundation is committed to complying with the laws regulating charities and charitable donations in all 50 states of the United States. Compliance requirements are not uniform and it takes a considerable effort, much paperwork and many fees to meet and keep up with these requirements. We do not solicit donations in locations where we have not received written confirmation of compliance. To SEND DONATIONS or determine the status of compliance for any particular state visit https://pglaf.org While we cannot and do not solicit contributions from states where we have not met the solicitation requirements, we know of no prohibition against accepting unsolicited donations from donors in such states who approach us with offers to donate. International donations are gratefully accepted, but we cannot make any statements concerning tax treatment of donations received from outside the United States. U.S. laws alone swamp our small staff. Please check the Project Gutenberg Web pages for current donation methods and addresses. Donations are accepted in a number of other ways including including checks, online payments and credit card donations. To donate, please visit: https://pglaf.org/donate Section 5. General Information About Project Gutenberg-tm electronic works. Professor Michael S. Hart was the originator of the Project Gutenberg-tm concept of a library of electronic works that could be freely shared with anyone. For thirty years, he produced and distributed Project Gutenberg-tm eBooks with only a loose network of volunteer support. Project Gutenberg-tm eBooks are often created from several printed editions, all of which are confirmed as Public Domain in the U.S. unless a copyright notice is included. Thus, we do not necessarily keep eBooks in compliance with any particular paper edition. Most people start at our Web site which has the main PG search facility: https://www.gutenberg.org This Web site includes information about Project Gutenberg-tm, including how to make donations to the Project Gutenberg Literary Archive Foundation, how to help produce our new eBooks, and how to subscribe to our email newsletter to hear about new eBooks.